tablet press

Switch on the system at the main switch of the tablet press and wait until the system is booted up to the starting mask.

The tablet press does not stop when the last metal sample has passed through the metal detector the tablet counter was reset .

Switch off the system at the main switch of the tablet press.

A blowing pulse will be carried out for 9 times after the tablet press is switched from set up to production mode.

Start the tablet press and ensure that the compaction force of the prepared punch still exceeds the tolerance limit plus.

The tablet press is running in set up mode and the compaction force of the prepared punch is still lying outside the tolerance limit plus.

The tablet press switches from set up to production mode.

The deduster starts working as long as the tablet press is in production mode.

Start the tablet press and keep it running until a new current revolution average value for main pressure is displayed.

Start the tablet press and keep it running until a new current revolution average value for pre-pressure is displayed.

ZP35D rotary tablet press is double-press type, continuous automatic tablet press for pressing granular raw materials into tablets.

Start the tablet press and check whether the deduster is working.

Let the tablet press produce for some revolutions.

The tablet press cannot be started.

The tablet press changes from production to set up mode and stops.

The tablet press is switched off with a fault.

The deduster stops working again as soon as the tablet press is switched to set up mode.

Switch the tablet press from production to set up mode.

The tablet press is switched off at the main switch.

Automatic tablet press is used to prepare steel slag samples for X-ray spectrofluorimetry at Masteel's No. 4 Steel group.

The tablet press is producing in production mode.

The tablet press is running in production mode.

Stop the tablet press afterwards.

Try to start the tablet press.

Each touch Tablet press independent control to automatically adjust the spring, so as to prevent irregular tiaodong peg to hang-flattening.

Start the tablet press again.

Repeat the test action 3 until you have checked the complete output range in which the tablet press operates.

The tablet press is stopped.

The tablet press is running in set up mode.

Let the tablet press run for several revolutions and check whether the deduster is working

Through the rotary tablet press, depending on the shape of compression molding mold;

THP Flower basket type tablet press

TDP Single Punch Tablet Press