the server

Then do not know how, and included down, I might have to do it for the server.

Database inconsistencies are corrected during every start and shutdown of the server in a process referred to as soft recovery.

Stop the server, restart it to refresh the plug-ins, and then stop it again to be ready to install the new connector.

The domain you select is used to determine whether the server being removed is the last domain controller of that domain.

Both the server and the client must be prepared to get Ajax requests and responses out of order, and some of them might even be missed.

At least one channel must be registered with the remoting system on the server before a remote object can be called.

If the server is running under a private user account , only the DSNs defined for that private account of that user is returned.

Appletalk is not a required protocol for Exchange, so you may remove it from the server if it is not needed for any other purpose.

This problem is usually down to a change in the server protocol, which means that each client needs to be updated.

I'll leave it up to you to improve this code by setting up variables or property files for the server name, API name, and so on.

Is it a fine restaurant, and the server is somehow annoyed or resentful of the customers?

If the server is not in development mode, BPEL will not allow a template to be replaced when it has running instances.

As is often the case, the client is simply requesting or saving information in a specific document format that is persisted at the server.

When you make a HEAD request like this, the server doesn't return an actual response as it would for a GET or POST request.

In the former case, the server discards the data represented by the shopping cart as soon as it has been used to render an appropriate page.

From this point forward, you will use your own account rather than the ADMIN account that you used to log into the server.

It was easy to do, as long as the server had a tape drive in it.

Appended to the beginning of it, that can be used in a client event to post back to the server.

In just a few minutes, I had the server running and was using a wizard to create and customize my first portal.

Change your browser's language settings to see that the server recognizes the priority you give to each language.

Setting a breakpoint in a T-SQL or SQL CLR object automatically enables the server for multi-tier application debugging, if it is possible.

Thus, Derby can be a key part of any kind of "offline" strategy, making data available even when the server is not.

Thus, a complete form does not have to be posted to the server to check to see whether or not the data in the form is valid.

Every one of those CGI scripts takes a little bit of oomph out of the server engine.

The server side has to be able to understand a JSON-formatted string and produce a server-side object in order to proceed and save the data.

Although virtualization began in mainframes, it found a key place in the server.

The Server Messages window appears and displays messages, showing that the server is ready to accept synchronization requests.

The server is bundled and ready to run from the Geronimo_installation_directory as the server. jar archive.

After the program is ready to be deployed, ensure that Office is properly configured on the server to run a suitable user context.

Whenever Dispatchers look for an active instance of a particular service, the scope of that look-up will be the Server Group he is in.

Next is the name of the JavaScript function that you want Flash to call when it gets a response from the server.

This example reports whether or not the server can be pinged, by determining whether the Ping method returned True.

Note that this does not preclude the server from also providing support for the traditional, relational interfaces.

On the Servers tab, you should be able to see that the application has been deployed to the server, as shown in Figure 28.

The property-based approach might be better if the server class is designed to be a component used with visual designers.

Note that it is up to the server to decide how much it will consider your title.

Cache items with this priority level are the least likely to be deleted from the cache as the server frees system memory.

And, of course, the best generals will be able to send the results to the server and compete for first place in the table of records.

The server can read the header, work out how much more data is required, and keep reading until it has a complete packet.

The server does not allow deletion of that file. Access is denied for delete, as D is denied for that group.

Load testing to the point of breaking the server(s) lets you know the performance envelope of you systems.

However, you can set it up in Integration Edition by opening the server configuration to edit the configuration file.

This step will have to be performed each time the server is started if the generated configuration file is not included in the war file.

Take a note of that location, because you will make use of it to create a simple batch file that will fire up the server.

Represents HTML elements, text, and any other strings in an ASP. NET page that do not require processing on the server.

When it arrives, the transport entity checks to see that the server is blocked on a LISTEN (i. e. , is interested in handling requests).

The name of the server that we were trying to authenticate to was %4 .

The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.

The document properties cannot be saved. The document may not be checked -out to you, it may be in use, or the server may be unavailable.

The server needs some fine tune for better performance and I will tell you how. The installation of the softwares is in Part II.

Learn about the server technology that enables you to create a form template that can be opened and filled out in a browser.

Therefore, the updates that are present on the server, ready to be consumed by clients, have to wait for some time before that can happen.

There's only one more step before we're ready to call the PHP script on the server.

Bear in mind that the point-in-time data can and likely will change each time you query it, as the state of the server changes.

If you haven't previously set up a server of that type, you'll also be prompted for the runtime directory of the server.

Since the deadline is so tight I cant wait for the psds to be done for you to start work and I need to see your work each day on the server.

Interacting with a portal on such a page is possible via so-called render links which, by definition, do not change the server side state.

The report displays the status of any log shipping activity whose status is available from the server instance to which you are connected.

Represents the server TCP port that this connection targeted if it were a connection using the TCP transport.

Specify a time of day to clear the device, or let the task complete the next time that the device connects to the server.

Determining the process that crashed the server is often the first step in resolving a server crash.

The server has just opened, there have been many players into the game, makes servers to achieve full state of the moment.

Such information is always sent to the client rather than kept on the server, and is usually generated in an optimized way.

Gets the invocation identifier of the server on which the last change was made to this attribute.

It's important that the server you create is set up to allow you to configure applications directly in the administrative console.

The server network endpoint did not respond because the specified server network address cannot be reached or does not exist.

You can develop a PHP script to consume a simple Web service in just a few lines of code, regardless of how the server is implemented.

Once you know which cluster is the default target, move the members from the server section of the other clusters to the default cluster.

Up to this point , we only installed product image on the server and clients .

Just for your info, the Peking Duck seems to be having a promotion at only $30. So remember to ask the server if the promotion is still on.

For instance, Ajax is often used in response to user input to modify parts of a page with new data fetched from the server.

Note that this does not include the server name, which can be retrieved separately.

So he decided to help you if you trust me, I can help you to make up loopholes in the server.

Iceworld : the name itself does not mean anything, but it has the server than any other official maps were 2. 5 times must produce more.

To debug server script, you must be able to provide the name and password of a Windows user who has administrative privileges on the server.

The mediation module is complete and ready to be deployed on the server.

It is a way to specify (in percentage) how much impact is allowed to the server for any given throttled utility.

The application itself can be used as a tool to assist in monitoring your current networks with just a little work on the server side.

Event that allows you to perform a custom set of instructions every time the value of the text box changes between posts to the server.

Once you know which cluster is the default target, you need to copy the server entries for the other clusters over to the default cluster.

The Actions button helps you to make the server and a new node in an existing ER domain or to create a new ER domain.

Refer to Figure 3 to see how much faster the server will start and to Figure 4 to see the updated memory utilization.

We had a wysiwyg online store builder that ran on the server and yet felt like a desktop application.

ping [nick]: Asks how much lag a user (or the server if no user specified) has.

You will be prompted for the hostname of a node to add to the cluster, followed by the name of the server you wish to give it.

As long as the maximum number of nodes for the server cluster has not been exceeded, you can add new nodes to a cluster at any time.

If you choose not to do this, Outlook allows you to select a time duration for leaving e-mail messages on the server.

It also means that if any one of your changes cannot be committed to the server for some reason, no changes are committed.

The server is a singleton object that has its own dual interface as well as a dispatch interface used for firing off events.

In the Server certificate to be used for this virtual host field, enter the server certificate name that you created earlier.

In the Server certificate to be used for this virtual host field, enter the server certificate name that you created earlier.

There are also enhancements to the Direct Push protocol to reduce how much data is exchanged between the device and the server .

You might have to specify the name of the server instance to which you are connecting.

We are currently upgrading our server to provide you with the best possible service. The server upgrade may take up to a few days.

Now all that's left is to actually replace the text of these elements with the server's data.

The buddy list is actually only one of a potentially long list of attributes that might be stored on the server on your behalf.

The number of computers that you will have to review depends on the server topology you chose for your installation.

Indicates that the client did not send a request within the time the server was expecting the request.

Click Next to see a list of available projects in your workspace and a list of projects that have been deployed to the server.

Method is called in an event-handling method for an event that raises a post back to the server.

The listen call indicates to the protocol that the server process is ready to accept any new incoming connections on the socket.

Consolidate transactions into a few aggregate calls on the server side to reduce network calls over precious and low wireless bandwidth.

Provide a time -out for connecting to the server and a chunk size for writing data .

The server information portlet is now updated every two seconds with a server memory utilization graph, as shown in Figure 2.

So far, all that we've done is request a copy of the buddy note information on the server.

Although members of the server role automatically have complete administrator rights, members of a database role do not.

In the past few months, this has not been a pleasant task. Above all, the damages in the server room are worrying.

The Server class holds the multiplexer loop, the heart of any NIO-based server.

This setting retrieves records from the server that have been modified since the last time data was synchronized.

DCOM authenticates the credentials of the client when the server receives the request at the beginning of each remote procedure call .

Even though the server had no shortage of memory, it might be unable to respond to user requests.

Saves any Web Parts control state changes that occurred since the last time the page was posted back to the server.

One of the simplest ways to interact with the ODM and administer the server is through the System Management Interface Tool (SMIT).

Eliminates duplicate messages: Since the server contains a state even duplicate messages can be identified.

This data takes the form of an NTDS Settings object that exists as a child of the server object in Active Directory Sites and Services.

If the server is still up and running, are the file systems still mounted when viewed with a df or mount command?

The server generates a pair consisting of a random public key and a private key using a set of key model parameters .

This statistic does not represent an absolute indication of the number of users, but a relative one to the SERVER_SESSION_TIMEOUT value.

Mandatory attributes are the minimal set of file or file system attributes that must be correctly provided and represented by the server.

Wait for a while and you see similar messages in the Server Logs view, as shown in Figure 29.

With these three technologies it's really easy to automatically push data from the server to the client in real time.

The server is said to either export the file system (in UNIX terms) or to share the disk or directory (in Windows terms).

A player that does not respond has either entered an error state or has disconnected and the server did not close the connection.

Specifies whether the system should verify that the name on the certificate matches the server host name before using the certificate.

In Flex all calls to the server are performed asynchronously, so none of these channels affect the performance of the client.

Just as the default implementation of the ZSI client was not namespace aware , the server is not either .

If the server does not start, examine the HTTP server logs for further diagnosis and refer to the next subsections of this article.

The combination of a powerful language and the ability to use it on the server and the client can be very appealing.

Finally, the Server must be started so it is ready to install and start the application.

The Server Name refers to the name of the cube being served by an IBM Cognos TM1 server on the administration host machine.

Your Web server is currently unable to handle the HTTP request due to a temporary overloading or maintenance of the server.

Microsoft has long been considered a buyer in the server and database sector, but analysts said it was hard to see an obvious target.

This function is called when the server responds to your request for a copy of the buddy note information.

If the system is not responding , the service can attempt to restart the server or notify an administrator .

If the system is not responding, the service could attempt to restart the server or notify an administrator.

Set the Server property to the name of the computer on which Analysis Services is installed.

The server has no way to tell which document is open on your workstation, unless you use ParameterDocID to tell it.

This will bring up the server console window where you will be able to see the messages.

" PDF for the server" was one of the more popular columns in this series.

But when a client attempts to open a database on the BUSY server, the client gets an indication that the server is not going to respond.

In both of these examples, you do not have to back up any of the clients that connect to the server.

Eventually, the server-side resource is complete, and one of the two methods in the code is called.

When the client is ready to disconnect it sends a command to the server telling it that it will disconnect.

Owner should be able to save the cart contents on the server as a quote aswell as save the quote as a PDF file on his computer.

Like the client, the server sends the bulk of information in the body of its response.

To complain again that the server has brought margarine rather than butter might make them feel as if they are being difficult customers.

Like a changeset, a shelveset can be retrieved from the server into a local workspace by any user who has sufficient permissions.

Saves any server control view state changes that have occurred since the time the page was posted back to the server.

Authenticated access is defined as an exchange of user or application credentials between the server software and a user or device.

Fault code indicating an error occurred during the processing of a client call on the server due to a problem with the recipient.

The server for your application needs to be able to do two things.

This was known as passive mode, or PASV, after the command used by the client to tell the server it is in passive mode.

A reverse lookup record for the server , also known as a PTR resource record, is registered in a reverse lookup zone in the DNS database .

When the server no longer wants to be registered with the endpoint, this routine is called.

Streaming channel is almost the same as long poll; the difference being that the server does not close the response stream.

We already did this in previous steps , since we found it easier to be able to reuse the field definitions when creating the server program.

Let me first describe all the interactions between the client and the server, and then look at a possible description of the contract.

19 MB had been downloaded since the last time the server was restarted (earlier that morning).

It involves getting the server to perform a large number of mundane tasks, exceeding the capacity of the server to cope with any other task.

Also, verify that the server is running up-to-date antivirus software, and that only trusted users can access the server.

When you do not enable network DTC access on the server, applications can only use transactions that stay on the local computer.

Likewise, it is possible to run several instances of the server on the same physical device.

Validate data both on the client and the server because client validation is extremely easy to circumvent.

The proxy classes are generated by the server and downloaded to the browser as part of any page that calls an application service.

When client affinity is to be honored, the work requests are directly routed to the server regions and out of WLM's control.

When you create a workspace using a template, Team Foundation does not retrieve the files to which it maps from the server.

The server did not bind to any transports. The server could not start.

Now you're ready to create this structure in your Web client, and send it to the server . . . almost.

To access configuration files on a remote server, the client computer must be able to communicate with the server.

This includes statistics records of all peers of a NTP server and of the PPS filter, if PPS signal handling is supported by the server.

Thus, the server would have rejected operation bin our example above since it did not branch from any point in server state space.

In other words, links dynamically describe the contract between the client and the server in the form of a workflow at runtime.

A context switch to a database user does not inherit the server-level permissions of that user.

Tools include the Server Status Monitor (SSM), which enables you to monitor the simple up or down status of a small group of servers.

The state is maintained in a database, which means that even if the server was to be stopped, the process resumes where it left off.

Each instance of the server program must be able to handle a portion of the work while others handle other portions.

Note that this can be detected only after attempting to communicate with the server.

This simplifies Web page development because you do not have to be concerned about passing this information back to the server.

Enabling this option causes the CLOSE cursor-name database request to be queued, and then sent to the server with the next database request.

These data types have to be translated into a stream the server can understand and work with.

Each request from the client to the server must contain all of the information necessary to understand the request.

At this point, the server allocates the resource for the connection and acknowledges this by sending a COOKIE-ACK to the client.

It isn't often that this pattern has to be applied to actors in the server and receiver roles.

It is entirely possible that the server is set up to match specific user clients, ones that I am not going to try to duplicate.

If you don't want to be asked again for the server you want to use, check Set server as project default (do not ask again).

When the download completes, all you need to do is decompress the . zip or . tar. gz file, and then you're ready to start the server.

The server keeps track of client loggings as if you were maintaining it!

The health of the server can be critical; anticipating server crashes is crucial to any running application.

Make sure that this server is started, then in the Web perspective, Servers view, right-click on the server then select Add Remove Projects.

Implementing an Ajax UI in place of a regular forms-based one may dramatically increase the number of requests made to the server.

This may lead us to ask whether or not the server has been overloaded with databases.

This is just a simple XML document for storing the root parameter that you are going to send to the server.

If the requested item is available in any cache between the client and the server, the request might be satisfied by the intermediate cache.

Then the call stack returned would be that of the server.

To provide these configurable assets, the server component needs to be loosely coupled to the content of these portlets.

There could be a problem with the server you are trying to connect to.

Regardless of the number of mirroring sessions to be supported, the server instance can have only one database mirroring endpoint.

This parameter specifies the name or GUID of the server that hosts the Outlook Web Access virtual directories that you want to display.

There was no response. The server could be down or is not responding.

then it uses the same VCC to inform the server whether or not the client is allowed to join.

NTLM authentication is required in networks where the server receives requests from clients that do not support Kerberos authentication.

The server, which can reside on the same host as the client, consists of a Web server or servlet container and a data store.

Therefore, you need to pass a parameter to the server -- specifically, the ID of the cart item for which you want to see a description.

If you wish to specify a set of options for the server, use the STARTLINE keyword together with a command string.

In a regular production environment, though, there can be some users who work out of views or applications residing on the server.

After this limit is reached, each SMTP connection made to the server returns with an out-of-memory error.

In the Data Connections section of the Server Explorer window, double-click (or expand) the database to which you want to add a table.

An extended stored procedure is called like a stored procedure but is run on the server like any compiled process.

This allows the server -- Geronimo -- to have control over the thread management and work distribution for a compliant RA.

That piece of code is only needed for the client side to perform a remote call to the server for adding the tasks to the database.

Given a desired number of users that you want the server to support, you can adjust the two parameters to achieve the best response time.

Host Type either the name or the IP address of the server to which you want to connect.

When a user requests a service from a server over a network, the server assigns a small piece of computing task to the user's machine.

If the server passes data on to other systems, those systems have no guarantee that the data was not modified by the server.

Specifies whether the import is made to the server or to the client computer.

If you want the draft copy to be stored on the server while it is checked out to you, clear the check box.

With the thin client design, the implementation is all done on the server side.

Finally, as I discussed earlier, threads out of the server's control make it difficult to achieve an orderly shutdown.

You've also learned a bit about the other JAX-WS client APIs that are used to configure the context of the SOAP message sent to the server.

To connect, you must provide at least the name of the server and the correct authentication information.

There was no way to tell the server, "Take back that bad block relocation error! "

After restarting the server, you need to also restart the EAR to be able to use the binary version of the Web archive (WAR) file.

Try to log into the server from its own terminal. If it doesn't work here, it won't work remotely.

If the connection limit is reached, the server does not initiate new connections until the number of current connections decreases.

The server formatter sink at the end of this chain will deserialize the request into a message .

The database operations associated with SQL cache dependency are simple and therefore do not incur a heavy processing cost on the server.

Group: The name of the server group to which the SDS server belongs.

The server is queried for a ticket number that can be used for that ticket.

Saves the changes made to the DataControlField view state since the time the page was posted back to the server.

At the end of the walkthrough, you will be able to run the solution on the server from your development computer.

If you were doing a transport and had to kill it halfway, SAP shut down, the server crashed or anything similiar, the transport may hang.

Once you start it up, the server listens for requests coming into that port from any client connected to that port.

If a user is listed in a deny access list or is not listed in an allowed access list, then the user cannot be granted access to the server.

As the connection comes out of the pool the connection is reset with the server moving back to the login time database .

Now you're ready to run your application on the server.

Delegations may be recalled by the server when a client requests conflicting access to a file delegated to another client.

You retrieve the object from the server and call methods as if they were local objects.

reload() Reloads the XML file from the server and recreates the children of this node.

The Server parameter specifies the identity of a Mailbox server with a public folder database that will be the source of the replication.

This just spits out a handy alert, to tell you when the server is done.

But all engineers seem to talk about is the XMLHttp method of getting data to and from the server.

Johnson explained that as a result of the server's extended beta program a large number of libraries had been tested.

Provide the name of the server to which you want to make the WMI connection.

The objects stored on the server are encrypted with the old password and can only be restored with that key.

Specifies the full URL of the server and the name of the Web site that you want to open or create.

RESTORE permissions are given to roles in which membership information is always readily available to the server.

ORB provides a framework for clients to locate EJBs on the server and invoke operations on those as if they were local.

Now that the server is configured, we are almost ready to deploy and test the application.

From the next screen of the wizard, select the Server Profiles that you want to associate with the Deployment Group and click Next.

Describes installing SQL Native Client Net-Libraries on the server and client computers and enabling a matching pair of network protocols.