thermal stress

Since the surface of glass have many micro-crack, when the thermal stress reach the critical value, thermal breakage occur.

Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.

The heat flow in curst and the thermal stress generated by the flow play a very important role in earthquake occurrence.

The results show that high thermal stress is generated in casing at the beginning of steam injection.

Since coefficients of thermal expansion between aluminum nitride and silicon are near, large thermal stress will not be introduced.

The results show that the main origins of the production of defects are axial temperature gradient and thermal stress in crystal.

Then, a novel method was used to calculate hygrothermal stress and compared with considering only the thermal stress conditions.

It tells the changing tendency of is contrary for work life of rolling stress and thermal stress roll rings under given assembly stress.

Thermal fatigue crack initiation and crack propagation are the combining results of cyclic thermal stress and high temperature oxidation.

When the temperature field of structure has been further, the ball out of the thermal stress structure parts [10].

Ladle is an important component in continuous casting production line. The distribution of thermal stress directly affects its service life.

Therefore the object is to produce the phenomenon of thermal expansion and contraction of the premise of thermal stress.

the radial thermal stress can be minimized or removed by reasonable bond thickness, the athermal design of optics mounting is performed.

Micrometeorites are a direct threat to humans and equipment, and solar-thermal stress is a significant problem for any structure in space.

Preliminary data indicate a better than expected power coupling, leading to slightly less thermal stress than originally predicted.

The open end of the filter was subject to thermal stress during the back pulse process.

One-piece stainless steel, fully- lugged , cast body is stronger than welded bodies and less subject to distortion due to thermal stress.

This paper studies the temperature change of tunnel lining at the early stage, thus thermal stress of concrete.

The main reason of damage to refractory materials, including chemical erosion, mechanical abrasion and thermal stress.

The thermal stress of the slag layer close to the water tube and the slag nail was comparatively small.

Comparison of various thermal stress analysis, to identify ways for the analysis of this article.

laser technique; thermal stress; laser forming; aluminum-lithium alloy; thin sheet metal; parameters optimization; scan method.

A swiveling cover serves for time limiting of vapor deposition and therefore it essentially limits the thermal stress for the substrates.

Warmer summers may increase host susceptibility to diseases due to thermal stress, particularly in the oceans.

While using ANSYS software to simulate thermal stress of mass concrete, it is the key step to read in data of temperature field effectively.

In present paper, the temperature field and the distribution of thermal stress were studied, so that two types of models would be simulated.

This paper presents formula to derive transient temperature distribution and thermal stress for hollow steam turbine rotors.

The distribution of thermal stress in the pulling straightening roller of slab casting machine is calculated with finite element method.

The transient analysis model of thermal-stress coupling in steam injection well is established by finite element software ABAQUS.

the thermal stress is the most fundamental failure reasons on the base of the distribution of stress field in hot forging dies.

Thermal stress is bigger at bottom and on the top of building, and thermal stress is less in the middle of building.

In this paper, the distribution of geotemperature field and the thermal stress are analysed, the mechanism and criterion of fatigue . . .

The Analysis on Thermal Stress of Overlong Basement Wall and Its System Development.

Internal cooling system is essential for reducing the blade temperature and controlling the thermal stress.

The higher the cooling rates, the greater the thermal stress, and the lower the toughness and the cold bending property of test sample.

Then by coupling of two physical field of thermal and structure, its thermal stress and deformation are simulated and analyzed.

A two-dimensional separation model of the thermal stress for large steam turbine rotor is posed in this paper.

This article researches on the calculation method of thermal stress of cement concrete pavement on lean concrete base course.

The coefficient of thermal expansion (CTE) of composites influence the thermal stress in the composite gun barrel.

The existence of rigid etch stop layer helped to reduce the thermal stress and plastic strain.

Have DOEs been conducted to verify the optimum oxide thickness to ensure no delamination after thermal stress test?

It also indicates that there is certain relationship between temperature grads, thermal stress and the formation of heat cracks.

At lower burnup level, the thermal stress is the principal factor affecting the safety of the rod.

On the basis of the sheet internal temperature changes in the plate and the thermal stress distribution.

and thermal structure is more subject to external constraints is to generate thermal stress causes.

Preferably, the burner is used to initiate the thermal stress crack, by increasing the power supplied to the glass.

The thermal stress distribution of SCSP in packaging process was studied by finite element method.

compared with specific water flow, the influence of casting speed on the thermal stress is greater.

The paper concludes with some proposed measures to reduce thermal stress of steam turbine during start up.

When the temperature changes the structure inside and outside the constraints is to generate thermal stress conditions.

A feasible dam monolith width is recommended in consideration of thermal stress etc.

The less thermal expansion coefficient and Young's modulus of sealing material can availably reduce thermal stress.

The part of thermal stress is relieved and the residual stress of phase changing is descend.

Objective To examine the thermal stress development during cryosurgical three region re warming.

An additional mechanism based on thermal stress response has been proposed (18), but its importance has not been assessed.

High-pressure water jet cutting has advantages of narrow cuts, no thermal stress, dustless and cutting any materials.

Study on Modeling of Rotor Thermal Stress with Varying Coefficients.

According to field survey thermal stress incurred by hydration heat may induce temperature cracking in PC box-girder.

The pressure is the thermal stress that arises from the uneven temperature field in the process of annealing.

Through the study of early thermal stress of the concrete tunnel lining, we can provide an effective reference for tunnel Construction.

This method reduces the offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Then comes a discussion on effect of thermal stress on roller disruption.

The thermal stress cracking is initiated without the use of mechanical force.

With the fast developing of roller compacted concrete technique in building dam, the demands of thermal stress become more and more.

Based on analysis of heat transfer and thermal stress, some feasible measures reducing heat loss of the car are discussed.

Beeaase it can remit thermal stress, FGM is ideal thermal resistant and heat isolating material for future spacecraft .

Thermal stress which is caused by damage to the refractory cracking the direct cause of damage.

Thermal stress is big in the end and small in the middle.

The maximum hygrothermal stress is about 1. 66 times compared with single thermal stress.

The Tianshui M 8. 0 earthquake in 1654probably related to the thermal stress caused by the deep heat anomaly.

Numerical Simulation of the Solidification Process of a Heavy Roll Stand for Temperature Field and Thermal Stress Field

Dynamic thermal stress distribution in the neighborhood of a cavity in an unsteady temperature field

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

The Interface Mechanical Finite Element Matrix Matching Method and the Thermal Stress for the Masonry Envelop in the Wall of Melting Furnace

Study of the method for calculation of the thermal stress and secondary force of bridge structure by solar radiation

Nonlinear Finite Element Analysis of the Thermal Stress of the Train Wheels

Calculation of Thermal Stress on Steam Turbine Rotor Surfaces by the Heat Flux Method

The Temperature Oscillation and Alternating Thermal Stress in the Wall of Combustion Chamber of Diesel Engine

Testing of building sealants; determination of the change in volume after thermal stress; dipping and weighing method

a heated uniformly inhomogeneous media due to the different coefficient of thermal expansion will produce thermal stress;

Optimization of Thermal Stress and Deformation of the Casting During Solidification by Neural Network and Genetic Algorithm

Against this background, it is significant to study the VRM with high efficiency, because it can save energy and reduce the thermal stress.

High-temperature Thermal Stress and Strain of Modified Polyacrylonitrile Oxidized Fiber During Carbonization Process

Thermal stress and fracture in transparent optical materials due to laser energy-absorption by a defect

Thermal Stress Filed When Crack Arrest in an Axial Symmetry Metal Die Using Electromagnetic Heating

Analytical Solutions of Thermal Stress Distribution in Plastic Encapsulated Integrated Circuit Packages

Three-Dimensional Thermal-Stress Coupled Field's Numerical Simulation of the Maze Composite Cooling Structure Tile

Optimum Design of Delivery System and Study of Thermal Stress in Side Dam During Twin-roll Strip Casting

Improved Empirical Equation Expression for Thermal Stress Coefficient of Portland Cement Concrete Pavements

Comparison of emulation computation results on thermal stress with prototype monitoring data in heightening test of Danjiangkou Dam

Analysis of Transient Temperature Distribion and Thermal Stress Distribution in a Casting During Solidification

Finite Element Analysis of Residual Thermal Stress in Functionally Graded Polycrystalline Diamond Compact

The Transient Temperature Field and Thermal Stress Analysis of Extendible Nozzle with Actuating Cylinder System in Deployment

Sensitivity Analysis to Thermal Stress of Surrounding Rock Deformation Modulus for Diversion Tunnel Lining Concrete

The Analysis of Non-steady Temperature Field, Thermal Stress, Global Stress and Temperature Control for Roller Compacted Concrete Dam

Study on thermal stress on proliferation of vascular endothelial cells and its mechanism

waterproof layer under protection, avoid thermal stress, ultraviolet ray and other factors on the destruction of the waterproof layer;

Analytical determination and interpretation of thermal stress using calculation of required sweat rate

Thermal Stress in Two-layer Concrete Slab due to Restraint of Interface

Experimental Study on Physical and Psychological Influence of Thermal Stress on Exercising College Students

Numerical simulation of temperature field and thermal stress field in solidification process for squeeze casting ZA alloy

Calculation Method of Equivalent Modulus of Elasticity of Foundation Under Principles of Thermal Stress Equivalence

Numerical Simulation of Thermal Stress of Diesel Engine Cylinder Block Castings Under Two Different Constraints

A Computing Method to Analyze the Non-Stationary Thermal-Stress of a Spheroid

The Influence of the Thermal Stress on a Pressure Sensor in Integrated Weather Multi-Sensor Chip

Quantitative evaluation method for thermal stress around borehole during thermal recovery

Application of Contact Element Method in Simulating Thermal Stress during Solidification of Casting

Computer Aided Design System for Functionally Graded Materials with Thermal Stress Relaxation

Relationships between thermal stress and the thermo-chemical reaction of PAN fibers during thermal stabilization

Temperature distribution and thermal stress analysis for turbojet engine turbine guide blade

Improvement of the Method for Marine Pipeline Upheaval Analysis under Thermal Stress

Overview of FEM Temperature Field Analysis and Thermal Stress Fields Analysis Technique for Refractory

Finite Element Analysis of Residual Thermal Stress in Engineering Ceramic Impeller of Pulp Pump after Sintering

Thermal stress analyses for roller compacted concrete dam by layer-merged and heterogeneous element method

Study on the Possibility of Maintaining Shock-less Constant Thermal Stress of Steam Turbine Rotors during Starting

Calculation analysis of the non-stationary thermal stress of low carbon steel thick hollow share

Thermal Stress Failure on Heat Insulation Coatings for Airborne Missile Fuselage Connection

Calculation of the thermal stress in the ceramic-lined pipe by the finite element method

Steady Temperature Distribution and Thermal Stress Analysis for Double Hull Structure

Research on temperature field and thermal stress of hydration heat in massive concrete of construction period

Application of Fixed Slab Theory in Calculation of Thermal Stress of Tunnel Lining during Construction Period

The Numerical Value Simulation Studying of Flip-Chip Thermal Stress Under Temperature Impulsion

Equivalent Fatigue Thermal Stress Coefficient of Cement Concrete Pavement

The Transient Temperature and Thermal Stress Distribution of Gain Medium in Solid-state Heat Capacity Disk Laser

Analysis of temperature field and thermal stress in a fixed tube-sheet heat exchanger

Emerging and its controlling of thermal stress of power station boiler drum

Abrasion Wear and Thermal Stress in the Side Dam for Twin Roll Strip Caster

Temperature Field and Thermal-stress FEM Analysis of Solid Board of Large-sized Magnesium Alloy Die Casting Machine

Finite Element Analysis of Residual Thermal Stress in Ceramic Gradient Wear-resistant Coatings

Analysis of transient temperature and thermal stress distribution for heat capacity disk laser

Thermal stress and strain of modified PAN fiber during thermal-oxidation stabilization process

Temperature and thermal stress analysis of coal water slurry ceramic nozzles with finite element method

Thermal stress and its control in concrete of hydraulic structures

Finite Element Calculation and Analysis of the Thermal Stress of Machinery Seal Rings

Temperature and thermal stress fields during the laser irradiating a metal plate

Influence of effective stress on the coefficient of permeability of porous medium under thermal stress

Experiment and evaluation for general effect of process parameters in sheet metal laser forming with thermal stress

Calculation of Thermal Stress in Microstructure Fabricated by Multilayer Thin Films

Simulation Analysis on Wall Thermal Stress during Oil Filling Course of Underground Concrete Tank

Thermal stress influence factors of asphalt overlay on cement concrete pavement cracking slab

Finite element simulation of thermal stress distribution in direct metal laser sintering

Increases heat transfer (heat dissipation) hence reduces heat buildup and thermal stress

Thermal stress distribution and structure optimization of bottom working lining of ladle

Analysis of temperature field and thermal stress in concrete filled rectangular steel tube column with FEM

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

A New Method to Calculate Thermal Stress of Concrete Plates on Foundation with Biconditional Restriction

Thermal stress calculation and analysis of FRP reinforced concrete structures

Failure Analysis and Thermal Stress Simulation in a Stacked Die Package

Numerical Simulation of Thermal Stress Fields During Magnetic Quenching

Thermally developing forced convection and the corresponding thermal stress in a porous plate channel

Evaluation of Creep Deformation Property by the Laser Thermal Stress Method

Finite element simulation of laser-controlled thermal stress separation of soda-lime glass plate

Application of Mapping Results onto a Path in Coupled-field Analysis of Temperature Field and Thermal Stress

Lifetime Study of Cable on Vessels under Thermal Stress

Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking

Analysis of Thermal Stress and Life Loss for Peak Load Regulating Gas Turbine Combined Cycle's Steam Turbine Rotor

Tests on thermal stress in asphalt cement sample and its calculation

Analysis of thermal stress for prestressed concrete continuous box-girder bridges

Monitoring and Analysis of Deep Foundation Pit Enclosure Structure Thermal Stress

Analysis of the Thermal Stress of Excavation Enclosure Structure

Thermal stress simulation for powerhouses on soft rock base during construction period

New concept and new techniques for solving the thermal stress problem in the heightening of concrete gravity dam

Finite element analysis of transient thermal stress during cryosurgery

Analysis on transverse thermal stress of concrete box aqueduct under sudden drop in temperature

Study on bending with thermal stress and evaluating its process parameters of stainless sheet steel

Thermal stress analysis of experimental platform dynamic balance

Calculation of laser-induced temperature increment and thermal stress of Al-film reflector

Finite element calculation on unsteady temperature field and thermal stress

Thermal stress analysis for structural ceramics during laser beam machining

we adopt five nodes difference method to solve thermal stress problem and thermal buckling problem , because this method is more precise

Influence of Thermal Stress on Locomotive Wheelset Equipped with Coupling Collar

Influence of Structural Parameters on Temperature Field and Thermal Stress of BF Cooling Stave

Numerical simulation of thermal stress during construction period of seepage control and reinforcement of aged concrete dams

Thermal stress analysis for decagonal quasicrystals

Thermal Stress Analysis of An Aircraft Windshield

Thermal stress analysis of two-layered concrete slabs

Nonlinear transient thermal-stress analysis of composite nozzle

Effects of Inner Configuration on Thermal Stress of Desulphurization Lance

Thermal Stress Analysis of Newly Functionally Graded Ceramic Cutting Tools

Thermal stress analyses of liquid propellant thruster chamber wall with milled slots

The mathematical models of heat conduction and thermal stress for steel coil in annealing process

Thermal stress analysis of the cooling pipe in Zn liquid with Finite Element Method

thermal stress; residual stress; similarity;

Formation mechanism of trapezoid crack in WC steel bonded carbide under action of thermal stress

Numerical analysis on thermal stress and experimentation of side dam on the twin-roll strip casting

Effect of Concreting Temperature on Thermal Stress of Roller Compacted Concrete Gravity Dam

Study on thermal stress of continuous casting bloom during solidification

Research on Temperature and Thermal Stress Analysis of Refractory Product

Analogue Calculation of Thermal Stress with Relaxation Effects

The Simulation Analysis of Thermal Stress Field on Floor Slab of Hydropower Plant in Construction a

Measurement and analysis of the thermal stress in adhesive coating

Analysis on thermal stress and distortion of refractory bricks by finite-element method

Thermal Stress Analysis of Prestressed Concrete Pavement

Thermal Stress Analysis on Ceramic Honeycomb Regenerator

Simulation Analysis of Thermal Stress of Baise RCC Gravity Dam under Summer Shutdown Scheme

FEM analysis of the thermal stress in the brake disc for speed-elevated passenger cars

Calculate the Steam Turbine Rotor's Thermal Stress Using Weighting-function Method

Recurrence algorithm of thermal stress monitoring on-line for steam turbine rotors

Elastic Solution of Thermal Stress in Concrete Structure Reinforced with CFRP

Numerical simulation of thermal stress on laser metal deposition shaping

Application of thermal stress compensator in super heavy oil development

Selection of Reduction Formula in Computing Turbine Rotor Thermal Stress

Study on thermal stress control for left guide-wall dam section of TGP by numerical simulation method

Thermal Stress Analysis of a Bimetal Strip

Numerical Analysis of Thermal Stress for Porous Concrete Base in Asphalt Pavement

Effects of thermal stress on proliferation of vascular endothelial cells in vitro

Coupled solving of thermal - stress during run - out table cooling in hot steel strip rolling

Experimental analysis on thermal stress of steel lined reinforced concrete penstock on downstream surface of dam

The influence of contraction stress and thermal stress to concrete structure

Finite element simulation of thermal stress field in cutting LCD glass substrate by laser

Research on influence of autogenous volume deformation on thermal stress of high arch dam

The Simulation Analysis of Thermal Stress Field of Tubular Turbine Hydropower Plant in Construction and Operating Periods

Dynamic analysis on temperature field and thermal stress in steam turbine rotors

Analysis of temperature field and thermal stress field in quartz glass heated by laser beams

Heat Exchanging and Thermal-stress Analysis in the Tail Section of Turbine Blade with Pin-fin Arrays

Simulation Study of Thermal Stress in Pier

Numerical Simulation of Temperature Field and Thermal Stress Field on Crack Tip in Metal

Coupled-field Finite Element Analysis of Thermal-stress in Asphalt Pavement

Design optimization for heat transfer and thermal stress problems

Application of Visualization Technique in Thermal-stress of Rotor

Thermal stress analysis of asphalt overlay on cement concrete pavement

Thermal stress control during Heightening Gravity-Dams

Thermal stress analysis for laminated composite plates

Study on Thermal Stress in Bearing House of Operating Roller of Continuous Hot Rolling Mill

Temperature Field and Thermal Stress Analysis by FEM for Barrel in Rapid Fire Condition

Thermal stress of artery during cryopreservation

Interfacial Thermal Stress Analysis in Packaging

Analysis on Thermal Stress of Transfer-Floor Composite-Slabs in High-Rise Buildings

Thermal Stress Analysis in Al Coating on Uranium Substrate by Finite Element Method

Simulation Analysis of Temperature Field and Thermal Stress of RCC Gravity Dam

Simulation System Software for Thermal Stress and Fatigue Life Expenditure of 300 MW Turbogenerator Units

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Pre and Post-Processing in Finite Element Analysis of Turbine Rotor Thermal-Stress

Finite Element Analysis on Thermal-stress in Different Expansion Gap in BOF lining

Analysis and optimization of thermal stress field in a high power laser slab

Thermal stress analysis of new combined diamond saw blades

A thermal stress problem is cited to show collaborative design flow to solving multi physics problem;

Investigation on laser induced thermal stress bending

Numerical Simulation of Temperature and Thermal Stress Field of Wagon Wheel Under Omnidistance Braking in Daqin Line

Model of One-Dimensional Thermal Stress Applied in Paint Removal by Q-Switched Short Pulse Laser

Analysis of Creep Property of Film Using Laser Thermal Stress Evaluation

Peak Regulating Turbine Rotor's Thermal Stress on-line Monitoring System

Thermal stress analysis and fatigue life prediction for solder joint of SCSP

Thermal Stress Analysis of Concrete Box Aqueduct by Solar Radiation

Experimental Analysis of Glass Cutting by Laser Thermal Stress

Analysis on thermal stress of organic-inorganic glass laminate

Finite Element Methods in Thermal Stress Calculation of Rotors

STRATA Stress-absorbing Layer's Impact on Load Stress and Thermal Stress in Overlay

Thermal Stress Analysis of Finite Element Method of High Pressure Cylinder

Thermal stress in growing finishing swine on a seasonal basis