testing method

However, for manufacturers, there is no much difference in the production process and testing method from that of common air filters .

Specifications should be very clear for the vendor . The testing method and allowed tolerances should be indicated .

Magnetic particle testing is a non-destructive testing method for detection of imperfections on or just below the surface of ferrous metals.

And the same testing method has been used to test experimental samples.

We look around the day testing method, it has a certain degree of feasibility, but there are limitations that affect the accuracy.

The nondestructive testing method for cemented carbide anvil is one of the important means for quality assurance.

Bayesian reliability sequential testing method is gave out for exponential distribution.

The most commonly used testing method for salmonella can take up to five days to produce results.

An advanced microbe chip testing method was put forward, and a new digital imaging scanning system for testing biochips was developed.

Influence of the sealing process between the glass and kovar on the bonding properties was studied by orthogonal testing method.

The vibration testing method on the early crack flaw detection was discussed, but it couldn't give the location and size of the crack flaw.

The invention provides a relay electric arc testing method and a simulated relay electric arc testing method.

Describes the layout of the experimental setup, as well as its measuring principle, testing method and results.

This invention relates to a kind of quick regulating-testing method for a bell shaped furnace air-fuel ratio regulating system.

Numerous such stories exist, but a reliable testing method does not.

AC chopping voltage regulator is characterized of high performance. The testing method of its speed and location is introduced.

The testing method used to figure out the innate threat of Devastate is described here.

The invention is called as the digital testing method of resiliometer.

Responsible for initiation of validation protocol of chemical testing method, execution of validation activity, and validation report.

The machine has a simple testing method, avoid the old water flowing method disadvantage of brings the water and need to brush.

Inspired by the concept of air-bearing, a new testing method based on MEMS technology is proposed in this thesis.

The vulcanization behavior of EPDM sulfur curing systems was studied through the application of orthogonal testing method.

Research and develop the materials testing method and evaluation ability, including testing program, instruments, jig, fixture, etc.

This paper firstly introduces the new apparatus of dynamic consolidation and its testing method and results.

Through a series of testing method, this article introduces the selecting and purchasing methods of high-speed machine tools.

So a new testing method is proposed, in this measurement, the position of electrodes must not be restricted.

This paper focuses on this issue, designs and implements an automated testing method for military symbols.

With the final data of quality inspection, the results showed that the quality of cadastral database testing method is feasible.

Low strain dynamic testing method is an important method in analyzing the integrity of the pile.

This issue also uses this dynamic testing method to do empirical analysis on college students' online consumer behavior.

This instrument provides a necessary testing method for industrial quality control and engineering supervision.

A testing method to determine light oil content in lubricating oil by closed flash point tester is introduced.

Objective To search for an easy standardization paternity testing method.

The most frequently used testing method of blood lead is also described: atomic absorption spectrometry and its operative process.

Synthetic testing method, conditions, processes and results for conductive diamond were in- truduced.

This procedure prescribes ultrasonic testing method and quality classification for welded joint .

The other one uses some conventional testing method to test the facet temperature of the semiconductor lasers.

The testing method are unvarnished transmission and unvarnished diffuse reflection method.

Finally, this paper primarily establishes a testing method of characterization silicon carbide wafer quality.

Results indicate that the token and the testing method of dynamic fracture toughness are feasible in dynamic fracture mechanics.

The paper introduced setting principle, calculation and testing method for the low exciting limit unit.

Frequently-used active testing and passive testing method are discussed, whose strength-and-weakness are analyzed.

In this paper, the single shear substance testing device and relative testing method for large dimension shear pin were introduced.

GRINDING MACHINES. FLANGES FOR THE MOUNTING OF GRINDING WHEELS. DESIGN RULES. TESTING METHOD.

This testing method is simple, and has a certainly practical worth to testing works of structure dynamic mechanics in wood industry.

The measurement of PD is a common non-destructive effect testing method to monitor the defect existing in the insulation system.

It became the source material testing method of a authority products.

Experiments showed that ultrasonic testing method was suitable for the weld quality testing of PE pipe.

The testing process and testing method of the hard-real time application software are simply introduced.

Through designing and making simulation reference block for EBW seam, the ultrasonic C-scan testing method is studied.

Built-In Self Test: An electrical testing method that allows the tested devices to test itself with specific added-on hardware.

Research and Practice of Character Education Testing Method with "Single-page Open-book Examination"

WwW. zIdiR. coM This dissertation mainly research on an aspheric partial compensatory testing method between null and nonnull.

The cross testing method is applied to analyze and design wearing test of sucker rod and oil tube.

Then the testing method of constant stress Accelerated Reliability Growth Testing is given on the basis of AMSAA-BISE model.

A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.

An in_situ testing method for unwinding ratio widely used in automatic silk reeling refers to the test at fixed position, time and end.

The actual illustration and testing method of fatigue property of filtration material were presented.

Objective: To establish a testing method of bacteria endotoxins for fluconazole injection.

A fast and cost-effective testing method is currently needed for the present pressure sensor manufacture.

The testing method of JR resistance curve is recommended, and the application of alloy steel with different heat treatment is given.

For this purpose, we bring forward the field testing method for glass curtain wall and corresponding testing equipments.

Next, in this paper, the testing method for this new energy methanol gasoline was researched.

PROTECTION OF PAPER. TESTING METHOD FOR FUNGISTATIC PROPERTIES OF PAPER AND CARDBOARD.

The Testing Method about Communication Protocols with "Activity"

This ersatz lung, no bigger than a multivitamin, could represent a new pharmaceutical testing method.

Consquently, the present invention has a more practical value compared with the existing life testing method.

furthermore, the testing method has the advantages of simple structure, high sorting efficiency, low cost, etc.

This innovative tool utilizes the world's first patented non-destructive testing method for concrete properties.

The paper give base datum to the widely application of the new pile load testing method.

The performance testing method is suggested for the boiler using mixed fuel of oil and touch gas.

Metal magnetic memory(MMM) testing method can find the stress concentration area.

Null pointer dereference faults are popular in C program, fault-oriented static testing method should detect these faults well.

Using the black-box testing method, we test the test software used in the data collection system.

Based on the results, the main technical parameters of coal isothermal adsorption testing method were defined.

Objective: To establish a serum pharmacology testing method for compound wurenchun capsules (CWC).

If the adjustment parameter is overfull, this testing method is difficult of carry out.

There are advanced producing machine, rich technical power, authority testing method, completing system of manage quality .

Deep understanding of testing: method, rule, analysis, etc.

Also listed the plating quality testing method, and the product quality standard.

Provides the testing method and the basis for platycodon grandiflorum's heredity rule research and the breeding practice.

Objective To improve the testing method for heat-liable enterotoxin (LT) of ETEC.

Aim To establish a bacterial endotoxin testing method for Troxcrutin and Sodium Chloride Injection.

A special testing method for EAST Tokamak insulator is introduced.

Testing method of interfacial bond strength was discussed.

Work closely with US testing team to update testers and testing method.

Conduct testing method transfer from other labs.

The testing of end system and relay system is based on remote method and transverse testing method respectively.

This leak testing method is according to the ASTM and is fully validated.

College or above, 3 years mobile product test experience, familiar with testing method of GSM, WCDMA.

The ultrasonic C-scan testing method is used in detecting electron beam welding( EBW) seam.

A blank-testing method is useful, because many applications want to treat all blank inputs in the same way.

This paper introduces the testing method of deposition efficiency of CO2 welding of bare wire.

The present invention discloses a molecule testing method based on the affinity microsphere.

And this paper use the stress testing method to test the effect of conduction to the portfolio strategy based on liquidity.

The testing problem of thin contact is then well solved by using the ultrasonic bottom echo testing method.

As an important testing method, it can test a workpiece without destructing it.

college or above, 3 years mobile product test experience, familiar with testing method of 3g platform.

CPV rapid diagnosis kit to cooperate other clinical testing method can make a quick diagnosis of sickness dog.

A new testing method with valid data is put forward in order to provide an interface having the ability to test and isolate.

A non-null testing method based on digital mask is proposed to test this surface.

In order to developing anion textiles, the relative standard and testing method should be set as soon as . . .

There is also no testing method to further justify the conclusion after it is reached.

SPSS17. 0 software was used, Measurement data using T tests testing method, count data using X2 test.

One testing method of the cycle time is advanced in allusion to the PLC.

We can also provide automatic testing method for our customers so as to improve their productivity, efficiency and profitability.

Simultaneously, uses the orthogonal testing method to study common rule of raise resistant starch content.

Testing Method and Error Analysis of the Moment Inertia of an Automobile

Elementary Study on Testing Method of the Surface Soundness of MDF

Testing Method and Data Analysis Used for the Rotating Axis of Ball Mill at Power Plant

Improvement of testing method of polyacrylamide used for drilling fluid

Sensitivity Analysis of Zero-sequence Current Differential Protection for Line High-resistance Grounding and Its Testing Method

Monitoring and testing method for energy saving of single--stage reciprocating refrigerating unit and its refrigeration system

Testing method for yarn irregularity of man-made filament yarns by means of electronic evenness tester

The Consolidated Linearity Testing Method to Determine Automobile Failure Distributions

Calculating Flow Resistance with Discharge Reduction Testing Method and Its Application in Fracturing Design

Infrastructure in the form of hardware and software to support the testing method, tools and enablement

Operating light-exposure apparatus (carbon-arc type) with and without water and testing method for exposure of nonmetallic materials

Testing method for the rate of linear change of high alumina and fire clay plastic refractories

The log testing method used for ground control in subsidence area

A testing method to determine the size of fusing body for an outdoor high-voltage fuse

Testing method for resistance to plastic flow of bituminous mixtures using marshall apparatus

Engineering Applications of A New Static Load Testing Method for Piles with Large Bearing Capacity in Bridge

Decontamination of radioactively contaminated surfaces. Testing method of decontamination agents for textiles

Testing method for dimensional change in laundering and dimensional restorability of knit fabrics: soap solution method

Testing method for colour fastness of plastics upon exposure to light of the carbon arc

Testing method for flow properties of thermoplastics with a capillary rheometer

Study of the testing method for anti-erosion properties of semi-rigid base materials

Testing method for measuring length of drilled concrete cores

Textile fabrics - Testing method for penetration resistance to feather and down

Experimental research of examining the time of writing with MB-98 erasable ball-point pen by dissolving capacity testing method

Testing method for naphthalene type hydrocarbon contents in aviation turbine fuels by ultraviolet spectrophotometry

Testing method for bulk specific gravity of light weight castable refractories (method for molded goods)

Analysis of the stroke testing method and its improvement for ST draft gear after maintenance

Property Testing Method on Photomultiplier Tubes Used in Nuclear Measurement

Study of Software Reliability Accelerated Testing Method

Discussing the Testing Method of Electromagnetic Relay's Static Electromagnetic Attractive Force and Spring Force Characteristics

Testing method for the rate of linear change of castable refractories

Evaluation of Software Requirement Complexity and Testing Method of Its Effectiveness

Exploring Software Testing Method from the Point View of Markov Chain

Testing method for time of setting of concrete mixture by penetration resistance

Testing method for color fastness to light of fluorescent whitened textiles

A study on the cylinder-mould testing method for the compressive strength of the mortar with highly fine-grained sand

Reliability Demonstration Testing Method for Continuous Execution Software

Research of Power Facilities Partial Discharge Wide Frequency Electromagnetic Coupled Testing Method

Miss distance error due to rotation of CCD sensor imaging surface and its testing method

testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products

Orthogonal testing method optimal preparation matrix formula of Cataplasm of Traditional Chinese Medicine

Testing method for length of synthetic staple fibres

Discussion on Testing Method for composite Strength of the Silver Copper Composite Electric Contacts

Testing method for oxidation characteristics of lubrication oil for aircraft reciprocating engines

Operating light and water-exposure apparatus(carbon-arc type)and testing method for testing paint, varnish lacquer, and related products

Testing method for deflections with a falling-weight-type impulse load device

polarized magnetic system; starting point of recoil line; testing method; approximate analysis method;

The limited value and testing method of electrical energy consumption for broadcasting receiver of colour and monochromic television

The limited value and testing method of energy consumption for household electric washing machines

Testing method for dynamic modulus of elasticity, rigidity and dynamic poisson's ratio of concrete specimens by resonance vibration

Study of Testing Method on Information Process Software in the Digital Library

Temperature Insulation Testing Method for CSPC Nanhai Petrochemical Project Storage Tank Big-volume Concrete

Testing method for antibacterial activity assessment of textile materials: parallel streak method

Testing method for hydrocarbon composition of liquefied petroleum gas(gas chromatographic method)

Testing method for polyvinylidene chloride filament and polyvinyl chloride filament twisted yarns for fishing net

Power consumption quota and its counting and testing method in heat treating production

Testing method for appearance of seams in wash-and-wear items after home laundering

Determination of crack depth in reinforced-concrete structure by the ultrasonic testing method

Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method

Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis

Testing method for flexing endurance of light leathers and their surface finishes

Testing method for thermal expansion characteristic parameters of metallic materials

Combustion Testing Method to Determine Bitumen Content in Asphalt Mixture

Textiles--Testing method for unevenness of textile strands--Using capacitance testing equipment

Establishment of Evaluation System and the Testing Method of the Regional Sustainable Development in Xinjiang

A fast equivalent testing method for evaluating cycle life of EV batteries

A Study of the Fast-testing Method for Road Surface Roughness with PSD

Accelerated life testing method and its applications for space products

The Testing Method of Rheologic Characteristic of High Temperature and Pressure Mud and The Application of the Testing Device

Computer simulation analysis for cross-linked polyethylene electric power cable water tree testing method

Testing method and experimental study of large impact current

Establishment of serum pharmacology testing method for Compound Realgar Natural Indigo Tablets

Study of Testing Method of Separation Techniques for Magnetic Losses

Effective Web Performance Testing Method and Its Application

Description on Analysis of Dangerous Defects and Nondestructive Testing Method of Fusion Fillet Weld of Anchor Box for Cable Stayed Bridge

Nondestructive testing method for dielectric reflection grating

Improvement of the Testing Method of Microwave Surface Resistance of High Tc Superconductive Thin Films

Preliminary Discussion on Testing Method for Mechanical Properties of Pre-packed Aggregate Concrete

The Validation of a Dynamic Power Supply Current Testing Method by SPICE

An Experimental Research on Testing Method of a Solid State Polymer Loss Factor

Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis

Research of New Testing Method for Bulkiness of Three-dimensional Crimp Polyester Staple Fibers

Testing method for grain size of light weight castable refractories

"Ultrasonic-repercussion process and pull-out" composite testing method for concrete strength

Testing method for precipitation number of petroleum products

Woven fabric and its products--Testing method for seam strength and seam efficiency

Effect of the execution of ISO cement strength testing method on the refractory materials for the kiln

Testing method for particle size of Radix Astragali ultrafine powder by microscopic image analyzer

Determination of Bearing Capacity of Large-Diameter Concrete Pipe Pile Using High-Strain Dynamic Pile Testing Method

Testing method for linear thermal expansion of porcelain enamel and glaze frits and fired ceramic whiteware products

Study of ESD Immunity Testing Method for Micro-Electronic System

Improvement of Testing Method for Related Substances in Doxycycline Hydrochloride

Differential Protection Testing Method on Digital-typed Generator and Transformer

Testing method for appearance of durable press fabrics

Discussion on Testing Method of Electrical Endurance for High Voltage Alternating-current Circuit Breakers

Testing method for breaking strength and breaking elongation of synthetic filament yarns and textured yarns

Testing method for surface moisture in fine aggregate by centrifugal force (production control of concrete)

Application Study and Testing Method of Presenting Vacuum Quality of CCRT with Performance of Screen Scanning Outgassing

Testing method for apparent porosity, water absorption specific gravity of refractory bricks

Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics

The Investigation about Factors of Chitosan Consolidating on Cotton Fiber by Orthogonal Testing Method

Digital Imaging and Accurate Locating Techniques for Finding Defects in Ultrasonic Testing Method

Testing method of vibration transmissibility for package cushioning materials

Improvement of Testing Method for Related Substances in the Quality Specification of Glipizide Capsules

Testing method for twist direction of yarn, thread, cordage

Comparison of testing method on color fastness to light of textiles

Determination of Testing Method of Traverse Points During Highway Measurement and Precision Analysis

Technique analysis of transformer winding deformation testing method

Testing method for apparent density of polytetrafluoroethylene resin

Testing method for particle size of polytetrafluoroethylene resin

Probe into Indication Testing Method for the Small Volume Tube Flow Standard Device

Testing Method for Loop Length of Weft-knitting

Testing method of light scattering and absorption coefficient for paper and pulps

Testing method for compressive strength of lightweight insulating concrete

Testing method for stripping resistance on bituminous- coated aggregate using boiling water

Testing Method for protection capability of skin protection material against nitro oxidizer

Testing method for pressure sensitive adhesive resistance of processed papers for packaging

Testing Method and Testing Software Design for Network Management Interface of Data Network Equipment

Testing method for color fastness of textile materials to weather: accelerated weathering method

Testing method for setting time of refractory mortars

Testing method for comparing concrete on the basis of the bond developed with reinforcing steel

Several Objective Testing Method about Speech Intelligibility

The Investigation of the Testing Method on Fracture Toughness of Dental Adhesive Resins

Testing method for coefficient of linear expansion and shrinkage of insulating fire bricks during heating

The Method for Judging Deterioration of Metal Oxide Arresters and Suggestions on Improving Testing Method

Study on the Testing Method for Content Determination and Content Uniformity of Adrenobazone Tablets

Testing method for leakage tendencies of automotive wheel bearing lubricating greases

Research on a program-structure oriented automatic grid software testing method

Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories

Testing method for modulus of rupture of refractory bricks and insulating fire bricks at elevated temperature

A Testing Method of Assessing the Protein-Removing Effect of the Contact Lenses'Protein -Removing Care Solution

Research on Nondestructive Testing Method for Supercritical Unit by Boiler Spiral Water Cooling Wall

Testing method for incombustibility of internal finish material and procedure of buildings

Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics

post emulsifiable fluorescent penetrant testing method

Testing method for transverse tensile strength of polystyrene composite wood wool cement boards

Study on Ultrasonic-rebound Comprehensive Testing Method for Concreted Strength

Sodium Light Testing Method on Organic Glass Impregnant Transference Phenomenon

Discussion on the Testing Method and Judging Requirement of the Control Bacteria in Oral Drugs

Ultrasonic Nondestructive Testing Method for Arc Surface Electric Contact

Pipe Centrifugal Technique Optimization Base on Orthogonal Testing Method

Testing method for percentage of breaking and bursting strength lowering of textiles to oxygen-bleaching

The hydrogen generation and atom-fluorescent testing method to test the As in poisonous materials