test bed

Also, by making use of GAMUT comprehensive test-bed, we show that this algorithm performs better than the other state-of- art algorithms.

Sometimes, they use the same location for generations to deposit their urine, making it a perfect test bed for research on climate change.

three of his officers had flown down to see the model sub that had been the test-bed for the prototype drive system.

Other African leaders are watching closely, sensing that this may prove to be a test bed for the continent.

Through the detection and debug of this test-bed, the performance index of it has fulfilled the designing requirement.

You'll notice that the code sample is set up to be useful as a test bed for different UI widgets and layouts ideas.

One of the countries to which the world's development experts have turned as a test bed is Malawi.

Finally, the experimental verification in rotor fault test-bed indicated that this method is feasible in the practical application.

The results showed that this test-bed had high working reliability, and experimental data had good repeatability.

EOTS has flown on a Sabreliner business jet, and the next step is for the system to fly on the Cooperative Avionics Test bed.

The test bed looks like an elevator car in the middle of her lab.

It is verified through practice that this test-bed could effectively test the anti-loosening property of screw thread connections.

Establishes a performance test-bed for cross-flow regenerators and a mathematical model for the heat and mass transfer.

The model served as an excellent test bed for the chiselling work to be carried out in situ.

Then, the general description and implementation details of the test bed are presented.

To validate the result of numerical simulation, the cold simulation test-bed was established and tests were taken on various conditions.

Cavitation was calculated in the heat exchanger test-bed. The generation of cavitation was simulated when fluid flows through throttle pipe.

Therefore, the goal of this project is to build a diesel engine-testing, intelligent fault diagnosis of an integrated test bed.

Specifically the vibration test bed frame has a great influence on the test result of products.

The big international brands seem to be using Shanghai as a test bed for their further expansion in China.

It was also, he added, "a crucial vehicle to transform Airbus" and the test-bed for a new industrial approach.

The test bed of rolling mill servo cylinder can be used to test the dynamic and static performance of the servo cylinder.

closer to go off work, should be cleaning and wipe test bed, and will the tailstock slip board box and withdrew to the right side, the bed.

Linux, being a production operating system and open source, is a great test bed for new protocols and advancements of those protocols.

In the end, the paper introduces the system anti-interference design of test-bed, as well as the operation method.

Field test results show the correctness and feasibility of the test bed, and it is said to be operating easily by the users.

The simulation results and analysis can also be used to provide guidance for the test-bed maintenance and amelioration.

The engine is usually tested on test-bed in order to strictly control test's condition and simulate the different load condition.

Cabinet: a welded steel plate as the main material to become a major test bed enclosure support structure.

The paper introduces the principle, hardware structure and software flowchart of the test bed of transmission of road engineering machinery.

This paper which talks about Indissoluble testing test-bed of vehicle with ABS is renewal one of Chang'an University.

During his trip Mr Wen laid flowers before a statue of Deng, who turned Shenzhen into a test bed for economic change exactly 30 years ago.

This thesis discusses the design and implementation of the computer measurement and aquisition system for engine test-bed experiment.

The experiments demonstrate that the moving target within this test-bed can be tracked efficiently.

The Paris caches serve as a production experiment and test bed for future cache developments, which are currently being studied.

T-Rex is the only rotary wing technology test bed currently flown by the Navy.

This paper realizes an auto-testing system for the performance of the Seed Cleaner and fully automatic test-bed in reliability.

The use in the main reducer performance test bed developed by us shows that the method is effective and efficient.

In this paper, thermal performance test-bed of total heat exchanger is improved with the requirements of the frosting experiment.

All China has to do is to turn its head to its neighbor, South Korea. That is China's test bed for soft power.

The system has been actually tested on our aero-engine test bed and appraised by the Aero -Industry Ministry.

The test result on the homemade test-bed indicates that the control system has excellent capability of speed regulation and energy saving.

The principle, constitution and main structure of various parts of transverse vibration test-bed for fasteners were introduced in detail.

The test has been implemented on a test-bed in which eddy current inducted heating and hydraulic pressure driven force are applied.

"The notion of a test bed was really pushed, " a participant at the C. I. A. meeting recalled.

Aiming at the LRE test-bed propellant filling system, this paper studied the application of fault-simulation-based fault-knowledge base.

The CVT test-bed can understand more roundly and accurately the working characteristics and related properties of the CVT.

Adaptation of injection system on engine test bed with respect to emissions , fuel consumption , performance and combustion noise.

Like the 777, you use the prototype program as a test bed for design ideas.

A test and control system for a power unit test bed is proposed, which has the advantages of being convenient and practical.

Based on theoretic research, a simple seeding metering device test-bed was designed and made.

In the focus of the furnace, an isolated test bed is used, in which absorber samples can be placed.

In the same initial conditions and controlling algorithm, experimental verification is performed on the self-developed test bed.

The production practice shows that the test bed is characterized by high measuring veracity and low labour intensity.

Build a model test bed to simulate the heat pump unit's operation, under the intermittent operation.

It is well known as a test bed for new control theory and techniques.

Experiments on test bed achieved a maximum of two injections per cylinder and working cycle.

1- Support for test equipment installation, test bed setting up for development and testing.

So, this paper base on a cutter cutting experiments in the shield tunneling machine tool cutting performance test-bed.

His new cells will provide the test bed for that hypothesis.

However, the speed of vehicle centroid is zero when a vehicle testing on a roller test-bed.

Therefore utilizing similarity theorem and combining with the vibration circumstances of vehicles traveling to make the test bed is ane.

based thorough analysis in space docking dynamics and loop control , test - bed ' s virtual prototype is presented in paper.

A bench test bed about LVC is done, introduces the LVC testing system's test principle, system structure and data gather control system.

This paper investigates the modal analysis with respect to the High-speed rotation test-bed through finite element method.

Berkeley UNIX was the original test bed for IP networking.

Operations show that the test bed provides satisfactory performance.

The method was demonstrated successfully on a helicopter integrated test-bed.

Soccer robot system is a typical multi --agent system, and it offers the standard test -bed for the research of multi - agent system.

Design of CAN bus network used in a test bed is discussed.

The structure and characters of the shaker test- bed were briefly described in this paper .

Finally, the conclusion and the developing trends of the steering gear test-bed and EPS are put forward.

The PaaS-enabled, value-added parts are a test bed for future business growth points.

The structural dynamic analysis of the test-bed of micro ma chine tool using finite element (FE) and experimental approaches is made.

Firstly, knowledge of classical mechanics and control theory is introduced to analyze test bed's mechanical, electric and control module.

The control analysis of Automobile test-bed braking system is a key problem on safety designing.

This test-bed is suitable for developing, test and evaluation of electric power steering system.

Therefore, to develop a simulation performance is good, testing precision of the brake test bed is very necessary.

The Pentagon has repeatedly said that the space plane is simply a "test bed" for other technologies.

Limited to the existing test-bed condition , The last examination will be remaining in the future test.

Therefore, this paper develops a practical Multi-Agent Test-Bed for coordinated control from the view of the whole.

This paper study a way to solve the problem that the ABS roller test-bed cannot simulate the dynamic process of actual braking.

The Defense Department is also continuing to serve as a test bed for new technology.

A monitoring water-wall test bed is built for validation and practical application.

We implemented this scheme in test bed, and compared the experiment result with simulation finished by Lee Yeng-zhong of UCLA.

A piece of crack was found in the external pipe when the cooling water system of one turbo-test bed is debugged .

The experimental system of reacting-force wall and test-bed was analyzed by static finite element method.

Test(test bed) is the key to guarantee the quality and reliability of computer systems.

A general-purpose fixture which can match the specific demands of vibration test-bed has been designed.

The study above made good prepare for the further design of the Hydraulic-servo Vehicle Collision Simulation Test-bed.

The hardware-in-loop simulation test-bed of electric power steering system of electric bus was designed.

The stage shall include the delivery of test - bed and all spare parts and components .

The test-bed has the character of simple structure and convenient operation and adjustment.

The constructed WSNs test-bed is a target tracking-oriented platform.

A type of electron device heat transfer performance test bed was developed.

In addition, its pluggable architecture provides an interesting test bed for writing invaluable application-specific detectors.

Finally, the dissertation constructed the simulation test-bed of city-bus lamp control system based on software and hardware.

Please make everything straight before the upcoming test starts up, especially the test bed.

The experiment of picking ears was carried out by self-made test-bed , which provided theory for designing corn combine harvester.

Introduced the importance of the using of remote voltage regulator technology on test-bed.

GENERAL METHOD FOR TEST BED TESTING OF AIR HEATERS AND CIRCULATORS.

In order to improve the feasibility of the Test-Bed, this paper designs three applications and implements them on the Test-Bed.

Could that nation's capital become a test bed for cars for hire?

A digital controller based on DSP is designed for position system of the test bed of ship, which is used for testing the anti-rolling tank.

Apache Pluto is a small and easily usable portal test bed for JSR 168-compliance testing.

Secondly, the control system of the test bed based on DSP (Digital Signal Processing) is constructed.

D2T is a world-famous company, specilizing in the research and manufacture of engine and powertrain test bed facility.

This environment is used as an initial test bed for new releases of dependant software.

Its test bed is being built on CERNET (China education and research network, including all the universities in China).

The test certification in large combustion test-bed has been done.

The bimorph structure material was studied on rotor vibration test bed. 4.

Lastly, it is proved that the ENN is feasible by test of test bed.

This device was studied on the brake test-bed.

Based on above analysis, a new pattern of test-bed was designed, which could simulate the process of steering better.

We can also test applications that require other products to be installed in the test bed.

That's NASA's SHARC test bed.

A cutting test-bed with an appropriate vibration excitation device was designed to study the vibrations influence on cutting force.

Based on analyse above, a new test-bed was designed. It can simulate the process of steering better.

For many, that leaves Hong Kong serving as a test bed for such transactions.

Investigation on the Test Bed and Its Monitor and Analyzing System Designed for the Double Diesel Combined Running Controller

Test-bed for Hydraulic Parts of Mini Construction Machinery with Frequency Conversion Controlling

Study of the Test Bed for the Performance Evaluation of Multi-source Data Fusion System

Experiment on operation stability of an endurance test bed for automobile air conditioner compressors

Development and experimental analysis of a pressure diagram teaching test bed

Measurement error analysis of heat transfer in water side of a surface-type heat-exchanger test-bed

SIEMENS PROFIBUS-DP Fieldbus Control Network and its Application in Drive and Computer Control System of Helicopter Stroke Oar Test-Bed

Application of comprehensive analysis method in the running study of diesel engine test bed

Development about Durability Test-bed of Refrigerating Compressor for the Automobile Air Conditioning

The design and analysis of a test-bed for the friction characteristics of fingers

Study on the Technique of Barbell Mass and Inertia Simulating of a Docking Simulation Test Bed

Establishment and Application of Cylinder Scavenge Test-bed of Two-Stroke Gasoline Engines

Study of the Test and Control System of Engine Test Bed with Multiply Neural-Fuzzy Control Method

Characteristics of Inductive Heating Applied to Thermal Fatigue Test-Bed for Heated Engine Parts

Design of Intelligent Pressure Meter with Digital Display of Three-way Valve Test-bed and Its Application

Footing Settlement Analysis and Its Design for Shear Wall Test-bed with Non-uniform Mass Distribution

Application of Embedded Ethernet Controller on Remote Monitoring System for Mechanical Transmission Test-bed

The Design of Computer Application to Improving Universal Hydraulic Material Capability Test-bed Measuring System

Research on Building Process Control of the Impact Imitating Test Bed of Spaceflight's Return Capsule Landing

Development of a Test Bed for Measurement of Marine Diesel Engine Exhaust Silencer Performance

In situ aerosol profiles over the Southern Great Plains cloud and radiation test bed site: 2. Effects of mixing height on aerosol properties

Application of Virtual Instrument Technique in Pumping Source Multipurpose Test-bed Measure and Control System

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System

Development and experiment of an autonomous underwater vehicle test-bed

Design of a high temperature refrigerant condensing heat exchange test bed

Industry: Paint room; Auto Products Manufacturing Equipment; Lift; Test-bed; Grilled tire machine;

Design and optimization of assembled flywheel system in electromagnetic eddy currency retarder test-bed

Design of Inertial Loading Brake Test-bed and its Virtual Prototype Simulation

Industry: Air purifier; Sewage Treatment Equipment; Power supply, ignition system; Test-bed;

Industry: Test-bed; Locator; Lift; Grilled tire machine; Baking machine; Other testing equipment;

Research on control strategy for simulation working condition test-bed of magneto-rheological fluid damper

Design and implementation of the control system on the test bed for exhaust muffler performance

In situ aerosol profiles over the Southern Great Plains cloud and radiation test bed site: 1. Aerosol optical properties

The Designing and Installing of the Test-bed of the Hydraulic Motor with Low Speed and High Torque in Sheet Style

Commissioning summarization of a two-stage heat pump test-bed

Discussion on Key Technical Problems in Developing Numerical Simulation Test-Bed for Aeroengine

Study of the Design for Canopy Thermal Fatigue Test-Bed

The Research and Develop of the Measure-control System in the Hydraulic Cylinder Synthetic Test-bed

Power Equipment Plan of the Closed Automotive Drive Axle Assembly Reliability Test-bed

The Design and Develop of the Measure-control System in the Test-bed with Hydraulic Servo System to Test Damper

Research of Drive Control and Load Control System for the Performance Test Bed of Toque Converter Clutch

Design of Microcomputer Measurement and Control Subsystem of Artillery's Brake Performance Test-Bed

The Designing and Realizing of Coal Winning Machine Cutting Part the Test Bed Monitor System Software Principle

Primary Design of the Automatic Transmission Performance Test -Bed

Computations of Cross-Link Forces and Vibrations for the Test Bed of the Full Channel Gas

Cyber Security and Information Infrastructure Test Bed and Demonstration

Design of Distributed Measurement and Control System for Test-bed of Refrigeration Compressor

Design of Super High-pressure Emulsification Hydraulic Support Valve Integrated Test-bed

Study of Dual Motors Synchronism Drive Based on Engineering Machine Hydraulics Underpan Test-bed

Design and Application of Test-bed for Precision Testing Nozzle Integrative Performance

CAN- Based Data Acquisition System for the Twin Inverter- Motor Reciprocal Power Fed Test-bed

Reconstruction of the Radiator Thermal Performance Test-Bed

Development of Synthetical Performance Test -bed of Oil Absorber Used in High -speed Train

Study of Fuel Measuring System Used on Test- bed of Injection Pump

Research and Manufacture on Serial Connection Test Bed for Fan Inspiration Performance

Design of the Acoustic Enclosure of the Test Bed for Exhaust Silencers Performance

the test bed can simulate different spacecraft docking dynamic tests by adjusting the simulator

Theory and Practice of a Test Bed Design of Bike's Gearshift System

Study of Airplane Thermo-sensitive Switch Test Bed

Analysing and removing the usual trouble of the mechanical vibration test-bed

Research of the Synthetic Test Bed for Auxiliary Motors in Diesel Locomotives

Develop of the Braking and Weighing Composite Test-bed on Farm Transport Vehicles

Innovation design on movement parameter test of mechanism and dynamic speed governing test bed

Test and control system used in oscillation absorber test-bed

Application Situation and Development of the Performance Test-bed of Hermetic Compressor

Design and Research of Hydraulic and Pneumatic System on the Brake System Test-bed of Drilling Rig Drawworks

Similarity Connection Between Test-bed of Slurry-carrying by Air-injecting and Original Model

Simulated test-bed of tractor-implement combination and integrated control

Statistical Analysis and Modeling of Data Measured from a Vehicle Speedometer Test-bed

Control system design for a water-cooled radiator test bed

Design and Test on Simulating Test-bed of Refrigerated Transportation Condition

An Optimum Speed Control Scheme for the High-rise Warehouse Test-bed Narrow-aisle Stacker Crane

Automatic Mechanical Transmission Test Bed and Development of Testing-controlling Program

The framing and the pressure test study of high-speed network test-bed

Design and implementation of the flexible test bed for small satellites

Design and study for faulty diagnosis test-bed of the electronic control engine

Experimental results on the same test-bed and selection analysis for hydraulic model of axial-flow pump

Rebuilding and Application of Test-bed for Vibration Absorber of Hydraulic Pressure

The Comprehensive Performance Test-bed of Car Proportional Multiple Valve

Industry: Paint room; Lift; Locator; Test-bed; Grilled tire machine; Analyzer;

The Improvement on Test-bed Structure and the Innovation of the Experiment Content

Research on the Testing-controlling System of Performance Test-bed of Air-conditioning Unit on Railway Passenger Car

Electro-hydraulic Proportional Semi-physical Test-bed for Energy Machine

Design and Realization of Intelligent Instrument of Speedometer Test-bed

Transducers designing for test-bed of armored vehicle engine compartment

Application of Communication between PC and Multi SCM in Vehicle Transmission Test Bed

Research and Experiment on Test-bed for Measuring Dynamics Parameters of Freight Car Bogie

Study and Data Processing of Mechanical Transmission Test-bed by Computer Control

The Application of Nerve Network in Principal Drive Control of Modern Thrust Bearing Test-bed

Research on the Testing System of a Reciprocating Wear Test-bed

Development of Distributed Monitoring and Controlling System on Railroad Locomotive Test-bed

Antiskid System Pneumatic Parts Test-bed Data Acquisition and Control System

Electro - pneumatic Brake Test- bed Data Acquisition and Control System

Simulation Impact Test Bed of Vehicle and Its Dynamic Model

Application of Axial Self-Tightening Belt Driving to High-Speed and Dynamic Load Engine Test-Bed

Application of Virtual Instruments technology in measure & control system of multi-phase flow test-bed

Design and Experimental Investigation of Exhaust Diffuser of Jet Engine Test Bed

Design of Refrigerating and Vacuum System of the Test-Bed for Heat Tube in Artificial Satellite

Study on production technology of crispy fruit-vegetable slice with small-scale test-bed

Research on the Database System of the Grinding Test-bed of Automobiles Front Axle Assembly

Simulation Test-bed Design of Hydraulic Tilting System for Military Vehicle

Analysis of Measured Parameters of Automobile Suspension Test-Bed

The Oil Temperature Controlling of Hydraulic Pump Performance Test-bed

Design of compositive test-bed of the airplane hydraulic system

Analysis and Simulation of Electric Power Drive System in Helicopter Rotor Test Bed

Development of Data Acquisition and Processing System for Diesel Injection Pump Performance Test-bed

Some methods to increase detection accuracy of automobile braking test bed

Manufacture of Wirerope Tension Sensor Demarcating Test-bed

Genetic algorithm dimension synthesis of the bar linkage of the test - bed for bengji elastic ropes

The Comprehensive Performance Test-bed of Car Proportional Valve

The Communication Design of Test- bed Distributed Control System

The Realized Method of the Test Bed Testing Instrument with High Accuracy

An Application of Distributed Control System to Automatic Engine Test Bed

Semi-physical Simulation Test-bed for Electro-hydraulic Proportional Pitch-controlled Wind Turbine System Based on Bladed

Study on the driver model on an engine dynamic test bed

Study on Electric Added Steering Resistance Simulating Test Bed

The Study of KMM Temperature Control System for Temperature Hydraulic Pressure Test-Bed

Development of the test-bed for testing the mechanical properties of straw materials

Design of a FPGA-based Software Radio Test-bed

The Design and Control of a Pneumatic Test-bed

The Study of Automobile Power Train Impacting Durability Test-bed Detection System

Design and Implementation of Test System for Rotating Heat Transfer Test-bed

Test-bed methods and evaluating index of dynamic property for motor vehicles

Design of the Test Bed System for Surveying the Stepper Motor Torque

Determination of Sensors and System Sensitivity in the Motor Vehicle ABS Test-Bed

Rotational Speed and Torque Measuring for Industrial Chain Test-bed

Design of Hydraulic Elevator System on Dynamic Equilibrium Test-bed

Intelligent Detecting System for Hydraulic Support Test-bed with VB

Design of thermal Fatigue Test-bed by Using Infrared Heat for the Aluminum-Alloy Piston

metering device test bed, Performance, real-time control;

Analysis on Application Effectiveness of Braking Test-bed