thermal conductivity

At very great depth the heat capacity as well as the thermal conductivity must be assumed to be higher than near the earth's surface.

Although steel is usually unfirable, it intends to deformation and fracture owing to its high thermal conductivity when exposed to fire.

The existence of the contact resistance must be considered when accurate thermal conductivity measurements are performed.

The concept of complex thermal conductivity coefficient and its calculation methods are introduced.

The use of die-cast aluminum with high thermal conductivity material, the surface of gray paint, the appearance of fine high-end.

The heat shields are made of ceramic flakes or aluminum foils of poor thermal conductivity.

Compared with the experimental data, the proposed method can be used to predict thermal conductivity in wide range of the volume fraction.

Hydrogen flame detector and thermal conductivity detector were used to detect gaseous hydrocarbons and inorganic gaseous respectively.

The system could be used to measure the thermal conductivity of the clean alternative fuels and provide the basic thermophysical data. 4.

Aerogels servers as a super thermal insulation material mainly due to its high nano-porosity and low thermal conductivity.

The thermal conductivity of the phase change material can be improved effectively by using silicon dioxide as a supporting material.

Such graphite bodies have high thermal conductivity and anisotropy and may be used for thermal management.

Quite often it is found that in an apparently uniform piece of rock the thermal conductivity differs from centimetre to centimetre .

In most crystal systems and in laminated materials the number of components of the thermal conductivity is less than six.

How heat dissipates through a material is a matter of the materials' thermal conductivity and thickness.

there are heating up in the screen printing, choose a wire mesh, wire mesh for electro-thermal conductivity of ink.

Finally, the sensitivity and effect condition of gas-chromatography thermal conductivity detection system can be greatly increased.

This shows that ionic modifying the silicone rubber would not enhance the thermal conductivity properties.

Correlation coefficients between the thermal conductivity and bulk density, open porosity, permeability a. . .

Infrared thermal imaging technology was used to measure and evaluate the thermal conductivity of carbon-fiber fabrics.

copper tubes has high thermal conductivity , efficient refrigeration , high pressure resistivity , excellent mechanical property.

Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity.

The system collected this step response signal automatically, and obtained the thermal conductivity.

Many theoretical and empirical models have been summarized to predict the effective thermal conductivity of polymer based composites.

This paper introduces a new method for measuring the thermal conductivity of microgranular, powder materials with a probe.

However, it is difficult to machine due to its low thermal conductivity, low modulus of elasticity and high chemical activity.

The anisotropy of thermal conductivity and its possible influencing factors are discussed for the rocks in Donghai area.

The temperature variation of the calculated thermal conductivity and special heat capacity agrees well with the experimental results.

Thermal conductivity is also higher, so parts that get hot, like engine blocks, will be able to transfer heat more efficiently.

With two types of the phonon scattering mechanisms considered comprehensively, the thermal conductivity of YAG ceramic is achieved.

Thermal conductivity, the ability of a material to transfer heat energy along its length, width, or thickness.

Due to its low thermal conductivity , PCM is more effective if coupled with Aluminum fins and Aluminum foam .

Thermal adaptation composite materials are composite materials with required thermal conductivity or coefficient of thermal expansion.

The apparatus for measuring thermal conductivity of the vacuum insulated panel (VIP) is designed by the steady-state-flat method.

The thermal conductivity coefficient of closed-cell pure aluminum foam was measured as a function of porosity and cell size.

Our results indicate that due to size effect, thermal conductivity of diamond nanoparticles is smaller than the one of bulk diamond.

SLIGHTLY CONDUCTIVE MATERIALS. DETERMINATION OF THERMAL CONDUCTIVITY. METHOD USING GUARDED HOT PLATE WITH SYMMETRICAL SAMPLES.

But its insulation heat preservation effect is good, high, low thermal conductivity, energy conservation and environmental protection.

as the temperature increased, the impact of fractal dimension on thermal conductivity composite became weaker.

Thermal conduction: thermal conductivity, and heat evenly applied to geothermal laying.

The CNT materials provide enhanced strength while preserving flexibility, and uniform electrical and thermal conductivity.

The thermal conductivity and its change laws of filled polymer composites materials were discussed in this paper.

Rock wool insulating felt is low thermal conductivity of a high-quality thermal insulating materials.

and the nano particles in a nano composite can block the formation of crystals, thus greatly improving thermal conductivity.

The background, current research status and problems of molecular dynamics ( MD )study on thermal conductivity are reviewed and analyzed.

The interrupter device must have a strong and very good insulation thermal conductivity, and negative electrical.

The choice of the structure of thermal conductivity cell and the thermal elements used in thermal conductivity detector was discussed.

The made Mo-Cu material has machinability, ablation resistance, good electric conductivity and thermal conductivity.

It's Properties must include light weight and low thermal conductivity with reduced thickness of the insulating layer.

Precipitation hardened alloy with good thermal conductivity and high hardness. Not suitable for case hardening or nitrating .

Evidence also implicates the crystal structure as a thermal conductivity barrier.

Thermal contact resistance and size effects are important factor for affecting effective thermal conductivity.

Filling polymer with high thermal conductivity filler could obtain high thermal conductivity composites.

the effective thermal conductivity in the braided cross sectional area increase as fiber volume fractions and braided angle increase.

Indirect methods of estimating thermal conductivity and volumetric heat capacity are described and employed.

In addition, the calculation results also show that the existence of torsion in a twisted nanobelt hardly affects the thermal conductivity.

The fifth topic is: the combined inverse model of the friction coefficient and the thermal conductivity for upsetting.

Thermal probe method is used to determine thermal conductivity of fish, pig muscle, beef and fat in low temperature.

In this paper an experimental formula with transient hot-wire method is deduced for measuring thermal conductivity of nanofluids.

A physical and mathematical model of the One-Wire Cutout Method (OWCM) is set up for measuring thermal conductivity of materials.

It is concluded that the method identifies self-heating defects with high precision for test pieces with small thermal conductivity.

A new measurement technique for thermal conductivity of solids at high temperature by the hot wire method is developed.

Inorganic heat transfer element has rapid start, high thermal conductivity and good heat transfer performance.

High hardness, brittleness, abrasive sharp, good thermal conductivity.

Besides the product has low specific gravity, high strength, good thermal stability, and low thermal conductivity.

The thermal conductivity of composites was increased with the decrease of the particle size.

A ratio of strength to thermal conductivity is proposed to characterize the adiabatic shearing sensitivity for steels.

Nonequilibrium molecular dynamics simulation method is used to calculate the thermal conductivity of Si nanowires.

The present invention has high thermal conductivity and low loss angle tangent and may have relatively high machining accuracy.

Higher thermal conductivity, higher reliability and higher heat resistance.

Methods of test for dense shaped refractory products. Part 14 : determination of thermal conductivity by the hot-wire (cross-array) method.

The results show that CO2 specific heat, density, thermal conductivity and viscosity vary abruptly near the pseudocritical temperature.

Extremely resistance to thermal shock, heat resistance, low thermal conductivity and low heat storage.

That is, ionic modifying do not enhance the thermal conductivity properties of electron or phonon conduction.

The paper introduces the basic principle of measuring thermal conductivity of fruit and vegetable, th. . .

It is showed that the thermal conductivity of the nano fluids increase with the particle loading.

the increase of the density of the material could improve the thermal conductivity of the material.

This pattern is caused by local boiling at point A of this figure when the thermal conductivity is obstructed by the mixed contents.

By analyzing the experimental results, a correlation of thermal conductivity of nano fluid is presented.

insulation: the thermal conductivity than other rigid insulation materials with low bulk.

Its high thermal conductivity reduces the energy required for sealing and sterilization.

The results showed that thermal conductivity and dielectric property of samples fabricated by SPS were prior to those fabricated by HP.

Phase interface moving measurement is a method of dynamic measuring of thermal conductivity of molten salt.

Thermal conductivity increased with higher density of the foams or hig. . .

My company newly developed new QY - hydrophobic type of rockwool plate with low thermal conductivity.

It is also found that, the thermal conductivity of materials with big quality ratio reach a same convergence with different width of films.

Metals are elements that generally have good electrical and thermal conductivity.

The spot welding performance of aluminum alloy is poor because of its high thermal conductivity and low resistivity characteristics.

The results agree well with the experimental results and numerical simulation is a effective way to estimate the thermal conductivity.

The average particle size, type of hardness, spelling, and thermal conductivity.

The thermal conductivity of phenolic or amine curing system is larger than that of anhydride curing system.

And surface contact fluid due to thermal conductivity and heated, lighter, and because the density difference with adjacent fluid increase.

This paper presents a new boundary identification algorithm based on the estimation of the effective thermal conductivity.

One major disadvantage of anodized surfaces is their very poor thermal conductivity.

The nitrogen in the block Si3N4 can be determined accurately by inert gas fusion thermal conductivity method combined with 5-element bath.

It is insulator but its thermal conductivity is better than Cu.

The influence factors of polymer thermal conductivity were reviewed.

when interrupted cutting ADI, the performace of PCBN tool is determined by its anti-fracture toughness and thermal conductivity.

Determination of thermal conductivity in low temperature is very important on organ cryopreservation.

The thermal conductivity of corn is measured by the transient heat flow method.

Ground thermal conductivity is the key parameter in the design of borehole heat exchangers.

The Influence of Chemical Compositions on Thermal Conductivity of cast Irons.

It has many features like high carbon, low hardness; big rate of gas hole, low thermal conductivity and so on.

High hardness, brittle, abrasive sharp, has a thermal conductivity.

Excellent heat resistance and low thermal conductivity.

high thermal conductivity metal matrix, aluminum plate.

Thermal conductivity of uranium-plutonium oxide fuel for fast reactors.

The relationship of thermal conductivity with the content of MgO was studied.

By using the Monte Carlo method to consider phase boundaries, one can derive the thermal conductivity of composite on various materials.

This is the governing equation, where the thermal conductivity is a function of temperature.

Under the same porosity, the smaller the grain size, the smaller the effective thermal conductivity.

The thermal conductivity is changed with average temperature, it can be expressed by the curve.

Stainless steel skin metal, tin Tongpi produced by the thermal conductivity of.

An equivalent thermal conductivity coefficient was proposed and deduced based on the measured results.

In the most general case the thermal conductivity is a tensor with six components.

Because of the low thermal conductivity of coal and the slow rate of distillation, coking is a slow process.

AIN ceramic material with high thermal conductivity, it can be used as the enclosure material for sea temperature sensor.

Measuring systems are affected by other properties such as thermal conductivity and thermal convection of the sample gas.

A method using micro-volume thermal conductivity detector based on MEMS technology is presented in this paper.

We establish a heat conduction model to investigate the thermal conductivity of nano-films based on moleculer dynamics simulations.

Very low thermal conductivity.

In such cases sintered metallic linings are preferred because of their high thermal conductivity and freedom from fading.

These kinds of measurements are necessary for determinations of thermal diffusivities from the thermal conductivity and densities.

The effect of different kinds of catalyst on micro-pore, thermal conductivity and microstructure of micro-pore carbon brick was discussed.

The crystal has a high-temperature chemical stability, good thermal conductivity and so on.

The Group 1B metals have the highest electric and thermal conductivity of all metals.

Thermal conductivity increased 71. 6% when content of EG was 10%.

The present work uses non-equilibrium moleculer dynamics to study the effects of length, thickness and Cavity on the thermal conductivity.

Testing of carbon materials; determination of thermal conductivity at room temperature by means of a comparative method; solid matters

Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

A Fine Needle Probe for Determining the Thermal Conductivity of Penetrable Materials

Study of relationship between the ratio of strength to thermal conductivity and adiabatic shearing sensitivity of steels

Measurement of Equivalent Diameter and Effective Thermal Conductivity of a Hollow Cylindrical Catalyst

A Study of Elastic Polyurethane Knitted Fabrics Having Thermal Conductivity and Perspiration Properties

An Experimental Study of Thermal Conductivity Enhancement on Solid Adsorption Refrigeration

Study of signal measurement and power circuit for modern-gas chromatography thermal conductivity detector

Thermal Conductivity of Donghai UHP Eclogite and Its Significance for Studying Continental Scientific Drilling

Molecular dynamics simulation on the out-of plane thermal conductivity of single-crystal silicon thin films

Regression relationships established for thermal conductivity of steels as function of chemical composition at various temperatures

Rubber - Determination of thermal conductivity by means of transient hot-wire method

Test method for thermal conductivity of plastics by means of the guarded hot plate

Study of the High Thermal Conductivity and Electrical Insulation Composite

Recommendations for the presentation of plastics design data - Thermal properties - Thermal conductivity

Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

Fractional Theory Applied in Thermal Conductivity Characteristics Investigation of Refractory Fiber Material

Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

Intellectualized Detector of Thermal Conductivity for Grain Material and Its Application

A Relationship Between Skin Thermal Conductivity and Gas Polytropic Index in an Open Atmospheric Balloon

An experimental study of the effects of loading on contact thermal conductivity

Inverse heat conduction problem for identifying thermal conductivity and thermal diffusivity simultaneously

Molecular dynamics simulation of the influence of lattice mismatch on cross-plane superlattice thermal conductivity

Mensuration of Thermal Conductivity Coefficient and Linear Thermal Expansion Coefficient of Shale Ceramics-Grain Concrete Products

Thermoelectricity resistance probe for measuring thermal conductivity of deep tissues: design and initial experimental study

The effective thermal conductivity of the thermal insulation coatings incorporated with ceramic micro-spheres

The Application of the Microcontroller Unit in Transient Measuring Thermal Conductivity Measurer of Poor Conductor

Measurement of Thermal Conductivity Coefficient and Linear Thermal Expansion Coefficient of Shale Ceramic Grain Concrete Products

An approach to determine the equivalent thermal conductivity coefficient of fire insulation of steel members

Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity

Measurement of Effective Thermal Conductivity and Wall Individual Heat Transfer Coefficient of Catalysts for Vinyl Acetate Synthesis

Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method

Monitoring and Controlling of Temperature on the Testing Device for Low Temperature Thermal Conductivity of Thermal-Insulating Materials

Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method

Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (cross-array) method

Comparison of the thermal conductivity of the related tissues along the meridian and the non-meridian

Nonequilibrium molecular dynamics simulation of the thermal conductivity of crystals film

The Determination of Thermal Conductivity of Tetrahydrofuran Hydrate at Atmospheric Pressure by Transient Plane Source Method

Testing methods of thermal diffusivity, specific heat capacity and thermal conductivity for high performance ceramics by laser flash method

Influence of s-f exchange effect and s-s electron exchange effect on the thermal conductivity and thermoelectric power in a rare earth metal

Experimental investigation on thermal conductivity and viscosity of enhanced heat transfer process fluids for aerospace

Analysis of Heat Transfer and Effective Thermal Conductivity of High Temperature Fibrous Insulation for Thermal Protection System

Determination of hydrogen in aluminium and its alloy by impulse-heating thermal conductivity

Determination of hydrogen content in steel by thermal conductivity method after fusion in a current of nitrogen gas

Experiment on Measurement of Thermal Conductivity of Good Conductor

Determination of the Thermal Conductivity of MPM Thermal Insulation Composite Material Method

Thermal Conductivity of Meso-Porous Silicon Prepared by the Double-Tank Electrochemical Corrosion Method

Mathematical modeling and application of radial effective thermal conductivity for coil heat transfer in HPH bell-type annealing furnace

Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

Thermal conductivity prediction of underfill and its affects on the flip chip temperature field

Experiment investigation on the thermal conductivity and contact resistance of glass - fiber reinforced plastic

Molecular dynamics simulation of thermal conductivity of single-wall carbon nanotubes with different structures

Calculation on the Insulating Layer of Thermal Network Pipes Varying with Temperature of Working Pair and Thermal Conductivity of Material

Measurement of the thermal conductivity of liquids by a coaxial cylinder technique

Determination of Subcutaneous Thermal Conductivity for "Peking-duck" Roasted by Air-impingement Technique

The Calculation on Viscosity And Thermal Conductivity of Gas Mixture with Condensable Components in Inter-cooler of Turbine Compressor

Investigation into Measurement Thermal Conductivity of Phase Change Materials at Solid-liquid Phase Transition

Concerning the Measurement of the Thermal Conductivity of an Argon Plasma

Computer simulation for thermal conductivity of copper thin film with homogenous non-equilibrium molecular dynamics

Refractory materials--Determination of thermal conductivity--Hot-wire method(parallel)

Linear regression verification on the changes of thermal conductivity of heat insulation material with temperature

Numerical prediction and measurement of effective thermal conductivity of honeycomb sandwich panel

Improvement of Particle Thermal Conductivity Automatic Measuring with Steady Cylinder Method

Geophysical implications of reduction in thermal conductivity due to hydration

A Topological-Quantum Method for the Estimation of the Thermal Conductivity of Liquid Alkanes

Thermal conductivity and its directional difference of protein fiber

Measurements of gas hydrate composition and its thermal conductivity

Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

Calculation of Economical Thickness for Insulation with Variable Thermal Conductivity

Thermal conductivity of high thermal conductivity composites for electronic packaging

Research Progress of AlN-based Microwave Attenuation Composite Ceramics with High Thermal Conductivity

Mathematical Models of the Dynamic Measurement for Thermal Conductivity of Material

Characteristics of Adiabatic Shear Bands in Several Steels with Different Hardness and Thermal Conductivity

Improvement of photoelectric system for measuring thermal conductivity of poor conductor by non-steady state flash method

Determination of thermal conductivity of SiC-bearing refractory mixture by improved hot-wire method with insulate coating

exterior graceful and delicate, adopt unique high thermal conductivity aluminum radiator design;

Experimental Investigation on the Thermal Conductivity Measurement of Materials with Hot-strip Method

Shaped insulating refractory products; Test method of the thermal conductivity (hot wire method)

A Finite Element Analysis for the Thermal Conductivity of Electrically Conductive Concrete

Prediction of Thermal Conductivity of Underground Rocks from P-Wave Velocity of Ultrahigh-Pressure Metamorphic Rocks

Theoretical deduction and analysis of equivalent thermal conductivity of oscillating heat pipes

A Preliminary Analysis of the Intensified Thermal-conductivity Mechanism of Nano-fluids

Rapid Measurement of Thermal Conductivity and Concentration of Glycerine-Aqueous Solution

Thermophysical properties of metal matrix composites with high thermal conductivity

the thermal properties of specific heat, coefficient of thermal expansion, and thermal conductivity;

Estimation of the soil thermal conductivity and heat flux in near surface layer from soil temperature

Study of Factors on the Thermal Conductivity of Particle-re-inforced Aluminum matrix Composites

Analysis of effective thermal conductivity of particle dispersive composites

Numerical simulation of thermal conductivity of thermal insulating materials

The Fractal Model of the Effective Thermal Conductivity in Granular Flow with Non-uniform Particles

Test method for steady-state thermal conductivity of heat insulating materials over moderate temperature

Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method

Design of Thermal Conductivity Method Hydrogen Concentration Detector

Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus

Measurement and Analysis of Self-baking Carbon Brick Thermal Conductivity Varying with Temperature

Evaluation on the uncertainty for determining nitrogen in iron steel by inert gas fusion-thermal conductivity method

Determination of Graphite Thermal Conductivity at High Temperature in Rare Earth Electrolysis Cell

Determination of high content nitrogen in vanadium-nitrogen alloy by pulse-heating thermal conductivity

Measurement of Thermal Conductivity and Thermal Diffusivity for Materials on Transient Hot-Plane Method

Thermal Conductivity and Moisture Absorption of Biomass Materials as Thermal Insulators

Experiment Measurement of the Thermal Conductivity of Paddy by a Tin Heat Probe

Preparation of controllable nanofluids and research on thermal conductivity

Theoretical Expression of Wood Thermal Conductivity in Tangential Direction

Resistance network for predicting the thermal conductivity of composite materials

Studies on Thermal Conductivity of Methyl Methacrylate Bulk Polymerization System

High thermal conductivity package, electrically insulated case

Research and improvement on experiment for measuring thermal conductivity of poor conductor by flash method

Confirmation of the Thermal Conductivity and Thickness of the Ceramic Film of Zirconium Alloy

Two Effective Thermal Conductivity Models of Porous Media with Hollow Spherical Agglomerates

the operating temperature of the valve can be reduced by using the higher thermal conductivity materials;

Numerical Simulation of the Thermal Conductivity of Plasma Sprayed Coating

Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot-wire (parallel) method

Influence of Soil Thermal Conductivity on Insulating Layer Thickness of Directly Buried Steam Pipeline

Study of Thermal Conductivity of Lennard-Jones Materials by Molecular Dynamic Method

Determination of Thermal Conductivity of Lining Materials in Aluminium Reduction Cells

Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

An Ideal Model of Liquid Mixture for Thermal Conductivity and Its Application

Design of Virtual Measurement Instrument for Material Thermal Conductivity

Second-ranking excellent thermal conductivity and heat preservation effect

Colourless optical glass test methods--Coefficient of thermal conductivity

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood