stress distribution

Diameter of anchored implant has no effect on either stress distribution of the bone tissues around the anchored teeth or the displacement.

Test results show that this technique is helpful to characterize the residual stress distribution . . .

Geogrid reinforcement can improve maximal compressive stress distribution, and decrease shear stress on the surface of soil foundation.

Observation by STM reveals the details of stress distribution that varies around steps and other defects of the surface.

The impact of coal mine goaf on seismic surface ground motion and its dynamic stress distribution around the tunnel was investigated.

Through the establishment of the finite model, receive the stress distribution in different parts of eggshell.

Energy band theory of polymer and the calculation of electrical stress distribution were used to explain the experimental phenomena.

Finally, as an example, the properties of the shear stress distribution in periodic oscillatory flow of human carotid were discussed.

The analysis results that the stress distribution at the anchorage zone of the bridge modeled by different models are very similar.

Furthermore, there was a mutually verifying relationship between 3D deformation and ground stress distribution of tunnel region.

The present invention provides a method for calculating residual stress and a method for derivation residual stress distribution.

Through the CAE analysis for the lightweight frame, the requirements for the stiffness and stress distribution of the structure was met.

The inhomogeneous temperature field has a strong effect on the stress distribution of the disc.

Also, due to the close contact between the rollers and raceways , uniform stress distribution is achieved in the bearing.

The injury within the knee is mainly due to mechanical stress distribution imbalance or excessive load which cause cartilage wear.

Objective To analyse the stress distribution of precision attachment dentures used in distal-extension edentulous cases.

The stress distribution of cladding layer can be ameliorate with preheating before cladding and thermal retardation after cladding.

Using traditional calculating ways, it is impossible to obtain precise result of stress distribution and deform of hard shell dam.

This method depends on determining the change in stress distribution within the model when it is turned upside down.

Results: Quartz fiber post would not change the inclination of dentinal stress distribution on the whole.

The theoretically optimum size of the valve body was obtained, its strength improved, and stress distribution in it made uniform.

Both initial and added deflection modes are simplified as trigonometric functions and the stress distribution can be revised if necessary.

Based on the basic theory of rock mechanics , this thesis decides the formula of stress distribution around the well bore in inclined hole.

Stress distribution on the surface of alveolar bone is very complex , not simple compression or tension.

To ensure stress distribution and stability of high slope at dam abutment after excavation, accordingly treatments have been raised.

Objective: To investigate the stress distribution of endplate at cervicothoracic, thoracolumbar and lumbosacral junction.

The research of the stress distribution can provide the theoretical foundation for the reconstruction of the water jacket.

The stress distribution and shear lag coefficients can be concluded from the results of finite element calculation.

Using the experimentally observed delamination load, the stress distribution along the interface is analyzed by boundary element method.

With similarity index, the results of model test were applied to predict stress distribution on the prototype structure.

The research shows an intimate relationship between the stress distribution and the distribution of petroleum pools in the area.

In accordance with the theory of fluid mechanics, the borehole stress distribution was deducted as pore fluid was Bingham fluid.

This paper analyzed the stress distribution in the cross-structure and discussed the regularities of the stress distribution.

This paper discusses the common problems in the design of frame calculation sketch and stress distribution at corner of the jetted plate.

Monitoring of the stress distribution along anchor bolts is a critical issue for ground anchorage engineering.

The deformation and stress distribution of the cylinder under radial force are obtained by static structure analysis.

AIM: To analyze the stress distribution of the endodontic instruments subjected to bending and torsional loads .

Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads.

Objective To analyse the stress distribution of distal-extension removable partial dentures supported by mini implants.

The further excavation of underground powerhouse will affect the stress distribution of system bolts and rock mass near crane girder.

The non-linear finite element method was used in this paper to analyze the stress distribution in the area.

Objective: To investigate the influence of transmandibular dental implants on the stress distribution at the bone interface around implants.

Stress distribution of the floor rock mass and the range of disturbance in floor rock affected by mining are discussed.

Their geometry, the so-called logarithmic profile, provides an optimum stress distribution in the contact zones in the bearing.

Conclusion: Acetabular tuberculosis alters the stress distribution at the hip.

When the bond is destroyed the shear stress distribution on the bolt side can be expressed by parabolic curve.

The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip.

and analyzes the stress distribution characteristic of the basement wall by example.

Objective To redevelop the finite element model libraries and to analyse the stress distribution of telescopic crown dentures.

The stress distribution of gangboard is analyzed briefly to get stress distribution law under seismic action.

Objective: To observe the stress distribution of the FPD, which used the loosen teeth as abutments .

Results: The deviation and stress distribution of the edentulous jaws and the base plates were obtained.

Objective: To analyze Relation of Elastic Modulus and Bone-implant Surface Stress Distribution.

When the bond between bolt and grout is intact the shear stress distribution of the bolt side is described by exponent curve.

It is obtained that increasing the fillet can significantly decrease the peak stress in this location and improve the stress distribution.

A 3D finite element model has been developed to analyze the stress distribution between a lower residual limb and its prosthetic socket.

In the fourth chapter, the writer discusses the stress distribution of defective braided composites.

Earth stress distribution characteristic of deep mines was analyzed with underground on-the-spot data.

It gives a new theoretical basis for studying temperature, seepage and stress distribution in rock mass in cold regions.

On the basis of the sheet internal temperature changes in the plate and the thermal stress distribution.

The die stress distribution is analyzed and the optimization design for the square tube die is presented.

The touch boundary and touch-stress distribution during drawing process also were analyzed.

Finally, the crack scale effect for material stress distribution is simulated and analysed.

Based on the above analysis, the influences of different parameters on the stress distribution of the anchorage segment are discussed.

In addition, the axial force increases with the deflection of the beam, and the stress distribution in the section becomes more complicated.

It is shown that the changes in fiber orientation and interfacial bond have great effect on the stress distribution. . .

Predicted failure occurs when the stress distribution approximates the material's stress-strain curve.

The flow and the shear stress distribution of the channel were computed by limited volume method.

The influence of air gap on stress distribution of continuous casting billet in mold was investigated.

The thermal stress distribution of SCSP in packaging process was studied by finite element method.

The stress reduction ratio and the vertical stress distribution in the embankment fill were studied in detail.

The non - uniform stress distribution makes it difficult to fabricate the same apex height of parallel arch- like beams.

An explicit nonlinear analysis was implemented to calculate buckling load and stress distribution, based on ABAQUS finite element software.

Conclusion: Stress distribution in cortical bone is more susceptible to implant designs in osteoporosis.

The stress distribution in the rest part of the wheel is even.

Therefore, to define the stress distribution and variation of coal mining face is critical.

Using method of three dimensional FEM analysis, whole stress distribution in the joints is are obtained.

Observe the equivalent stress and plastic structure of strain and stress distribution can determine the structure of danger point failure.

Steel web shear stress distribution is more uniform, it reflects the corrugated steel web excellent shear capacity.

The stress distribution of implant was uniform when implant linked stable tooth.

At first, used ANSYS to analyze the anchorage zone on the cable bent tower and investigate stress distribution and deformation at the area.

Fig. 14 shows the deformation and stress distribution of frames when the center axle wheel gets over the block.

the region ahead of sintering has greater stress distribution than behind.

However , a bar loaded in bending will have a stress distribution that changes with distance perpendicular to the normal axis.

Factors influencing the stress distribution in prestressed cables were analyzed by using the finite element method.

At the same time, numerical simulation of dynamic stress distribution in specimens was performed to validate the experiment.

At the same time, by analyzing the strain test result, stress distribution and stress concentration place were found.

At the same time, by comparison, obtaining influence of stress distribution in each section of prestress .

Based on the field data, the stress distribution map on Jincheng coal mining area is drawn up.

abstract: Objective To study stress distribution of dental zirconia layered structure.

Objective To study the stress distribution in PDL responding to horizontal forces with different periodontal bone loss models.

abstract: Objective To study stress distribution of dental zirconia layered structure.

Objective To study the effect of different palatal vault shape on the stress distribution of edentulous maxilla surface.

Analysis on Carbon Fiber's Stress Distribution within the Cohesive Length of the Bending Members

Stress Distribution Analysis of the Surface of Condyle during Simulated Fracture Healing of the Neck of Condyle by Miniplate Osteosynthesis

Dynamic thermal stress distribution in the neighborhood of a cavity in an unsteady temperature field

Comparative study of vertebral body stress distribution following insertion of artificial lumbar intervertebral disc

The photoelastic experiment simulating study on the law of stress distribution of the surrounding rock of soft rock roadway

Comparative study of facet joint stress distribution following insertion of artificial lumbar intervertebral disc

A Study of Rolling-up Tension Control for a Constant Stress Distribution in Textile Band

A Study of Rolling-up Tension Control for a Constant Stress Distribution in Textile Band

Characteristics of Stress Distribution for Nozzle Reinforcements with a Nozzle Extended Toward Inner Side

Numerical simulation of stress distribution and displacement of rock strata of coal mines by means of DDA method

Study of the stress distribution in the temporomandibular joint during clenching with the three-dimensional finite element method

Testing for Ground Back Pressure Acting on Bottom of a New-Type Foundation and Its Stress Distribution

Study of stress distribution in PDL responding to horizontal forces with different periodontal bone loss models

Comparative Study of the Effect on Stress Distribution of Porcelain Laminate Complex with Different Elastic Moduli

Evaluation of stress distribution of the cervical vertebras after prosthetic replacement of human cervical intervertebral disc

The stress distribution and displacement variation of the coal top and bottom layer at different distances from the face are discussed;

Three-Dimensional Finite Element Method Analysis of Stress Distribution around Dental Implants to Estimate the Influence of the Length

Three-Dimensional Finite Element Method Analysis of Stress Distribution around Dental Implants to Estimate the Influence of the Length

Horizontal well; Stress distribution; Critical sanding pressure drawdown; Elastic-plastic stress; Sanding break radius;

Mechanical Study of the Maxillary Second Molar on Stress Distribution

Effect of coal pillar width on the stress distribution law of surrounding rocks in fully mechanized top-coal caving mining face

during loaded, the stress distribution and deformation between the coarse aggregate and cement mortar;

Experiment and Study of the Area of Stress Distribution When Saw's Disc Revolving High-speed

Study of Stress Distribution of Cement Sheath Cross Section under Non-Uniform Formation Stress

Parameter Studies for Simulation of Stress Distribution Around Tunnels and Interaction Between Tunnels With an Elasto-plastic Model

Finite Element Analysis of Stress Distribution on Condyloid Process after Internal Rigid Fixation of Mandibular Angle Stabilizing Fracture

Application of homogenization method on the analysis of micro-stress distribution in non-continuous carbon nanotube reinforced composites

Application of homogenization method on the analysis of micro-stress distribution in non-continuous carbon nanotube reinforced composites

Analysis os stress distribution of different thickness porcelain laminate veneers with three dimensional finite element methods

Three-dimensional finite element analysis of stress distribution in temporomandibular joint under distraction forces

Finite element analysis of the stress distribution in small joint after the implantation of artificial lumbar intervertebral disk

A three-dimensional finite element analysis of the stress distribution in mandibular central incisor with alveolar bone loss

Photoelastic Analysis of Extruded Pressure and Stress Distribution in a Flat Extrusion Container

Influence of Fiber Framework Design on Stress Distribution in Posterior Glass Fiber Reinforced Composite Resin-bonded Fixed Partial Dentures

Three dimensionally reconstructed models of human abdominal aortic aneurysm: finite element analysis of wall stress distribution

Analytical Solutions of Thermal Stress Distribution in Plastic Encapsulated Integrated Circuit Packages

Effect of stress distribution of support tissues using attachment prostheses with different number of abutment

Effect of stress distribution of support tissues using attachment prostheses with different number of abutment

Photoelastic Analysis of the Effects of Teeth Position to Apical Stress Distribution in Different Occlusal Patterns

Experimental Research on the Bond Stress Distribution of Deformed Reinforcement in the Lightweight Reinforcement Concrete

The correlation between the enlargement of root canal diameter and the fracture strength and the stress distribution of root

Three Dimensional Finite Element Analysis of the Stress Distribution of Dental Implants with Immediate Loading

Singularity of Crack Cohesive Stress Distribution Along the Fracture Process Zone of Concrete

Stress Distribution of Unsupported Hole of Shihuang Tunnel and Calculation of Its Stability

The study of the stress distribution characteristic on separated girder-plate section of prestressed concrete cable stayed bridge

Three dimension finite element analysis of the stress distribution on sacroiliac joint surface in sitting stance

Three-dimensional-finite-element Analysis of the Morphology and Depth of Fiber Post on Dentinal Stress Distribution of the Root

Three-dimensional-finite-element Analysis of the Morphology and Depth of Fiber Post on Dentinal Stress Distribution of the Root

The stress distribution in the dome region of acetabulum after transverse acetabular fractures treated with different fixations

Analysis of Transient Temperature Distribion and Thermal Stress Distribution in a Casting During Solidification

Three-dimensional finite element analysis on stress distribution of proximal femur under normal double legs standing position

Finite element analysis on stress distribution of mandibular alveolar mucosa under linear occlusal complete denture

The stress distribution in the alveolar bone during the stable period of two shape of vertical bone loss around single implant

Setup of finite element model of maxillary premolar with different designed MOD cavities and primary analysis of stress distribution

The effects of unilateral hyper-erupted third molar tooth on apical stress distribution of mandibular teeth by photoelastic analysis

Effect of different tilting angels of molar as a fixed bridge abutment on the periodontal stress distribution

Characteristics of Stress Distribution on Bone Adjacent to Implants Under Three Different Loading Directions

Characteristics of Stress Distribution on Bone Adjacent to Implants Under Three Different Loading Directions

On indoor model experiment of the action of prestressed anchor-rope and lattice beam on slope soil stress distribution

Finite Element Analysis of Residual Stress Distribution in a Frag-Demolition Shell Charge

Experimental Study on Stress Distribution in Periodontal Tissue of Titled Abutment before and after Fixed Restoration

Experiment and study of Stress Distribution on Floor Rock of Extracting Seam

Numerical Simulation of the Stress Distribution for Fast Burst Reactor Under Pulsed Operation

Stress distribution and variation on infrared thermograph and photoelastic technique

Stress distribution and displacement by different distract directions on mandibular corpus

Elastic analytic solution to the displacement and stress distribution in the soil around laterally loaded piles

Analysis on digital simulation for stress distribution law of coal pillar

Analysis on digital simulation for stress distribution law of coal pillar

A study on the stress distribution in the temporomandibular joint affected by tooth wear with three-dimensional finite element method

Relationship between Angle of Tilted Abutment and Stress Distribution of Periodontal Tissue in Fixed Prosthesis

Influence of different implant diameter with immediate loading on stress distribution of implant-bone interface

Three dimensional FEM analysis of stress distribution around micro-implant loaded with different-directed force

Some Measures for Improving Experimental Accuracy of the Normal-stress Distribution of Beams

Numerical research on stress distribution of geosynthetic reinforcement layer

Application of images processing in propeller blades stress distribution experiment

First, a finite element model of clutch driven plate assembly was built, the stiffness and stress distribution were calculated;

Characteristics of stress distribution and prediction of strength in heat-affected zone softened welded joints

Characteristics of stress distribution and prediction of strength in heat-affected zone softened welded joints

The analysis shows that the lower friction coefficient, the more uniform stress distribution;

Influences of Foundation Deformation Modulus to Stress Distribution of Roller Compacted Concrete Arch Dam

Analysis of the influence of lower premolar rotation on TMJ stress distribution by finite element method

Research of its stress distribution regularities

Influence of various loading conditions from posterior single tooth implant on stress distribution in the mandibula

Stress distribution and deformation within strength mismatched welded joints

The stress distribution and clinical significance of three-column of thoracolumbar vertebrae under force

Stress Distribution of Interaction Between Hydraulic Structure and Soil Foundation

Photoelastic analysis of apical stress distribution in normal and cross-bite occlusion of partial posterior teeth

Stress Distribution of Interaction Between Hydraulic Structure and Soil Foundation

Photoelastic analysis of apical stress distribution in normal and cross-bite occlusion of partial posterior teeth

The Contact Stress Distribution Analysis for the Rough Surface Sliding on the Gradient Layers Coating

Experimental study on stress distribution in central section of box-girder span resulted from force transfer in anchoring

The Influence of Doping Concentration and Initial Temperature on the Stress Distribution of Heat Capacity Lasers

Stress distribution research of cancellous bone planted in three types of mandibular defection

Finite Element Analysis of Elastic- Plastic Stress Distribution in Extruded Piping Branch Junction

Finite element analysis about stress distribution of longitudinal-cross wall under cantilever beam

Stress distribution in bone around dental implants studied by three-dimensional finite element analysis

Three Dimensional Numerical Simulation of Temperature and Stress Distribution in Welding of Thick Plate

Three Dimensional Numerical Simulation of Temperature and Stress Distribution in Welding of Thick Plate

Base on research of earth stress distribution and behavior law to select seam gateway layout and support countermeasures

Influence of the loading conditions on stress distribution of modified bar-clip implant-borne overdenture in the edentulous mandible

The influence of cusp inclination on the compressive stress distribution of edentulous maxilla surface

Study of on rules of default stress distribution in Mandarin Chinese

Effect of Perforating Parameters on Stress Distribution of High-density Perforated Casing Under Uniform Loading

Influence of various abutment number on stress distribution in the attachment denture supporting tissue

Changing natural gas pipeline stress distribution through heating method by thermistor

Deck pavement; Finite element analysis; Skew shearing test; Shear stress distribution;

Numerical Simulation on Deformation and Stress Distribution of Flat Extruded Container

Numerical Simulation on Deformation and Stress Distribution of Flat Extruded Container

Application of optical fiber sensing technology in stress distribution test of prestressed anchor bar

Deformation and Stress Distribution of Solid Cemented Carbide Milling Cutter for High-speed Machining

Electromagnetic radiation laws of the stress distribution in working face

Photoelastic analysis of the influence of severe attritionon the apical stress distribution under vertical load

Numerical Simulation of Curved Shear Bands and Stress Distribution for Stout Specimen (Yield Mine Pillar)

Nonsingular stress distribution effects in rock crack propagation under shearing load

The Stress Distribution of Unilateral Distal-Extension Denture with Various Retainers

Analysis of Stress Distribution of a Tank Composed of Cone-shells

Analysis of stress distribution of implant-tooth-supported fixed bridge for different pontic lengths

Analysis of stress distribution of implant-tooth-supported fixed bridge for different pontic lengths

Study on Effective Stress Distribution and Limit Flanging Coefficient in Round Hole Flanging Process

Stress distribution measurement of premolar under loading by laser real-time holographic method

Deformation model and stress distribution of continuous extrusion process

Influence of Stiffness of Pipeline at Dam Back on Stress Distribution of Steel Wall and Temperature Displacement

The Transient Temperature and Thermal Stress Distribution of Gain Medium in Solid-state Heat Capacity Disk Laser

Simulation for the Effect of Overburden Depth on Stress Distribution Around Tunnels and Interaction Between Tunnels

Numerical simulation of progressive failure and stress distribution of yield pillars

Stress distribution and displacement of natural teeth-implant supported fixed bridge

Magnetic testing method of residual stress distribution by geomagnetic excitation

Magnetic testing method of residual stress distribution by geomagnetic excitation

Deformation zone stress distribution of cold drawing rifled tubes with Finite Element Analysis

Analysis of transient temperature and thermal stress distribution for heat capacity disk laser

Bone stress distribution around fixture for natural tooth-fixture supporting fixed bridge

The numerical analysis of the stress distribution of roadway under locomotive stress and in the soft floor strata

Influence of different location of implants on the stress distribution in mandibular implant-supported complete overdenture

Stress Distribution Around Rectangle Holes in Anisotropic Elastic Plates

Study on the Stress Distribution and Flow Patterns in a Liquid-Solid Moving Bed Reactor

Effect of Residual Stress Distribution in Multi-Pass Welding on Stress Relief Criterion in Local Post Weld Heat Treatment of Pipe

The analysis on stress distribution rule of multi-wedge cross wedge rolling tools forming automobile semi-axes

Finite element simulation of thermal stress distribution in direct metal laser sintering

Relationships between stress distribution of mandible with age and incidence of fracture

Thermal stress distribution and structure optimization of bottom working lining of ladle

Numerical simulation of geo-stress distribution during injecting well blowout

The effects of different loading directions on stress distribution on implant-bone interface

A Three-Dimension Finite Element Analysis on Normal Mandibular Stress Distribution

Finite element analysis of displacement and stress distribution of high embankment

Characteristic of Stress Distribution in the Deformation Zone of Asymmetric and Cross Rolling

Numerical Simulation of Stress Distribution of Dissimilar Steel Joint in Utility Boiler

Measurement of Residual Stress Distribution in Thick Pre-Stretched Aluminum Alloy Plate

The Law of Stress Distribution of Steel Ring Group of Metal V-Belt CVT

Study on Stress Distribution of Explosion in the Space at the Hole Bottom by Dynamic Photo-Elasticity Test

Stress Distribution of Mandible under Different Loading and Biting Condition

Finite Element Analysis to Interfacial Stress Distribution of Nano-composite

Analysis on stress distribution of casing in sloughing formation with finite element method

The influence of cusp inclination on the stress distribution of maxillary complete denture base

Experimental Study on Residual Stress Distribution of Laser Rapid Forming Process

ANSYS analysis on stress distribution of longitudinal-cross wall under cantilever beam

Stress Distribution on Abutment of Tooth- Implant Fixed Bridge Under Different Loading

Numerical Analysis on the Stress Distribution of Super High Pressure Water Jet-Flow Impinging Solid