stress analysis

Detailed stress analysis was carried out for a section of the pipeline including an eccentric reducer on which long cracks appeared twice.

By means of EIM, the calculation result obtained from stress analysis can be conveniently utilized.

Normal stress analysis and shear stress analysis arc performed by means of the approach of materials mechanics.

Conversant with engineering stress analysis formula and is capable of applying them correctly.

The grid method of strain analysis is one of the oldest techniques known to experimental stress analysis.

The dynamic stress analysis is demonstrated to have significant impact on the strength failure and fatigue failure of flexible mechanisms.

Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.

In the stress analysis of heat exchanger system, the tube layout area of tube sheet should be treated as a various elastic based plate.

Fundamental theory, simplified model and stress analysis method for retaining structure design of the double-row piles are introduced.

The results of steel tie bar stress analysis indicated that rectangular ties worked better than Z-ties.

The conveyor middle trough of the improved for stress analysis, theoretically proved the correctness of the optimization program.

abstract: Objective: To evaluate the significance of photoelastic method in the stress analysis of the bilayer all-ceramic dental crown.

Comparison of various thermal stress analysis, to identify ways for the analysis of this article.

This article introduces structure, characteristic, stress analysis and theoretical calculation of shaft pin cutting type load cell.

Using finite element software for stress analysis of the floor, get a reasonable layout of the grate.

The paper presents the precision obtained from measuring the pressure in tube of hydraulic system by electrical measuring stress analysis.

In stress analysis of petrochemical pipe line, the secondary stress check is the one of basic strength check.

The method can provide references for the contact stress analysis and fatigue life calculation for gears of gearbox in fuel cell car.

In this research, initial stress measurements in base rock, secondary stress analysis around a tunnel, and AE measurements are examined.

Due to the HPHT conditions, casing and tubing designs were subject to rigorous stress analysis.

Simultaneously solves the support reaction of the key components, folloewd by the stress analysis through ANSYS.

The direct internal force method of equivalent normal stress analysis for the base surfaces of arch dams is presented in this paper.

Relationship between permeability and stress is the key foundation for coupled seepage-stress analysis of rock mass.

This paper describes an application of image holographic method to the photoelastic stress analysis.

It is shown that the method of thickness design, equivalent thickness calculation and stress analysis are correct and effective.

In this study, the stress analysis and fatigue life analysis was conducted by ANSYS finite element analysis software.

The function and implication of stress analysis for reliability prediction is introduced.

finite element analysis; dental stress analysis; inlay; dental material.

Stress analysis of door and window of a passenger aircraft.

The article mainly presents the stress analysis and stiff skeleton design at the closure sector.

Implementation of Continuous Rigid Structure for Short Piers and Stress Analysis for Segment No.

The dam profile design and stress analysis are the major contents in arch dam design.

also use Graphic design size linkage, and linkage to conduct stress analysis and strength analysis.

According to the stress analysis and simulation during the whole motion process, the paper designed the control module.

The crustal stress analysis indicated the dead weight stress is affects the tunnel the primary factor.

We may use the plane stress analysis for determining deflections in the midplane of the beam.

The paper discusses stress analysis and heal - stress proof methods of radiant coil in steam cracker.

By extension stress analysis of square cup stamping, moving regularity of weld beads is obtained.

At the same time, the stress analysis of the control valve body was shown by considering the fluid-structure interaction.

The application of finite element method in heat conduction and stress analysis is studied in this paper.

The photoelastic stress analysis is a technology with many researches focus on it.

In fact, there are many available software packages for stress analysis, interference checking, and kinematic analysis.

Skilled in flow simulation and stress analysis with associated software.

It's a significant guidance for determining the scheme of frame designing and stress analysis.

An analytical method of stress analysis for thick plates subjected to dead weight is proposed in this paper.

Those knock-on effects were barely tested in the stress analysis.

Methods The three-dimensional finite element stress analysis method was used.

Based on the stress analysis for cutter damage with elastomechanics theory, measures for improving cutter life are proposed.

A suitable K(subscript I) value is suggested based on the stress analysis and operation conditions.

Stress analysis of tunnels is performed based on initial stress measurements in the base rock.

The role of stress analysis in the design process.

The Surface Stress Analysis of the Supporting Bone Tissue of Distal Extension Denture Retained with Semi-precision Attachment

Residual stress analysis of an engine block casting (Half of the casting, the stress along the axis direction of casting)

Stress analysis of temporomandibular joint in state of mandibular protraction by means of three-dimensional finite element method

Von Mises stress analysis of a cantilevered fixed partial denture around the connectors

Stress Analysis of the Integrate Jacket Seal Ring of the Cylinder of a Thin Film Evaporator and its Improvement Design

Stress analysis on welded seam and carbide bit of the pick-shaped cutter

Growth and Stress Analysis of a-Plane GaN Films Grown on r-Plane Sapphire Substrate with a Two-Step AlN Buffer Layer

Interfacial Stress Analysis for composite materials model of an Elliptical Inclusion under a Linear Temperature Change

Establishment of finite element model of lumbar motion segment implanted with artificial lumbar intervertebral disc and its stress analysis

Varying External Loads Method on a Model in Photoelasticity Stress Analysis Under Its Own Weight Combination with External Loads

Effects of soil layer construction on liquefaction of sandy soil by means of effective stress analysis method

Development and Application of a Stress Analysis Software about Circulating Water Pipe of Turbine Unit in Power Station

Stress Analysis for a Fin Stabilizer Structure and Discussion of a New Fin Style

Stress Analysis and Reinforcement Design Calculation at the Openings of Nozzles on the Shell of an Internet Pressure Vessel

The Research of the Customized Structural Reconstruction on the Mandible Defect and Three- dimensional Finite Element Stress Analysis

Stress Analysis of maxillary anchorage molar and its periodentium by three dimensional photoelastic method

Stress analysis of abutment and its surface supporting tissues with three different removable partial dentures

Temperature Stress Analysis of a Super-Long Annular Structure in a Stadium

Elastic-plastic stress analysis of the vessel subject to internal pressure with the hole of great diameter

Stress analysis on structure defect with different post core materials and full crown restoration of the permanent mandibular first molar

Stress Analysis on Finite Orthotropic Composite Plate with a Central Hole under Biaxial Loading

Stress analysis of the opening reinforcing structure with the nozzle extending inside of opening under internal pressure

Understanding of gasoline engine air induction systems and throttle bodies, Mechanical design (Vibration, thermal and stress analysis)

Stress analysis of the double-layer flat extrusion container with integral wall-plate by the photoelastic method

Stress Analysis and Safety Assessment of a Multilayer Wrapped Nitrogen Storage Tank

Stress Analysis of Bridge Load Cell of a Fixed Pad Bearing Using Two-Dimensional Finite Element Method

Stress analysis and experimental study of the disc plate foundation

Multi-region Technique of BEM and Its Application in the Stress Analysis of Steel Pipe Embedded in Concrete Dam with Soft Cushion

Three-dimensional finite element stress analysis of the temporomandibular joint during mandibular osteodistraction

Space-stress Analysis of the Pre-stressed Concrete Continuous Bridge at the Cantilever Construction Stage

Three Dimensional Stress Analysis of Main Box Girder with Twin-Box Single Cross Section Used in Cable-Stayed Bridge

Horizontal Stiffness of Spherical Tank as a Whole and Stress Analysis of Tie-rod between Support Columns

Thermal Electrical Stress Analysis in Reliability Prediction as the Key for Circuit Reliability Design

Stress Analysis of the Pre-stressed Concrete Continuous Bridge at the Cantilever Construction Stage

Joints stress analysis of a prestressed-concrete slant-legged rigid frame bridge

Stress Analysis and Strength Evaluation for a Condenser with Geometric Defects

Stress Analysis of the Pile Bent Diaphragm Wall of Light Railway of Guangzhou New Baiyun Airport

The Stress Analysis and Its Application of Rotationally Symmetrical Shell at the Geometrical Discontinuity

Canine mandibular stress analysis by finite element method when Partial-cortical-cutting distraction osteogenesis

The Stress Analysis and Its Application of Rotationally Symmetrical Shell at the Geometrical Discontinuity

Canine mandibular stress analysis by finite element method when Partial-cortical-cutting distraction osteogenesis

Three dimensional finite element stress analysis on superstructure of the fixed bridge supported by tooth-implant

Determination of polymerization shrinkage stress of universal hybrid composite resins by photo-elastic stress analysis

Comparison of Stress Analysis Method to Design Chemical Industry Pressure Container with Conventional Designing method

Stress Analysis of Protruding-concave Ring-stiffened Cone-Toroid-Cylinder Combine Shell with Different Bulkhead Arrangement

Stress analysis and test of a new style bridge expansion and contraction installation

Stress analysis of the concerning regions of the vertically tensioned prestressed concrete simple beam

Dynamic Stress Analysis of the Interface in a Particle-Reinforced Composite

Self-tightening Technology for Compound Gas Canister Made from Carbon Fibre and Its Stress Analysis

Self-tightening Technology for Compound Gas Canister Made from Carbon Fibre and Its Stress Analysis

Temperature Observation and Stress Analysis of Concrete Lining during Construction Period for Water-Conveying Tunnel

The Transient Temperature Field and Thermal Stress Analysis of Extendible Nozzle with Actuating Cylinder System in Deployment

Computer Formula Derivation for Boundary Element Methods in Stress Analysis Problems of Symmetrical Structures

Investigation into Equivalent Stress Analysis Method for Turbine Blades with Densely Distributed Film Cooling Holes

Stress analysis of post-core with different lengths and diameters with three-dimensional photoelastic stress freezing method

Hemodynamic numerical simulation and wall shear stress analysis of intracranial terminal aneurysms

Stress analysis of a circular membrane in the laminated membrane coupling

Fast algorithms for stress analysis simulating construction process of massive concrete structures and applications

Three dimensional finite element stress analysis in the vertical fractured first premolar after bonding and replantation

Three dimensional finite element stress analysis in the vertical fractured first premolar after bonding and replantation

Three-dimensional Finite Element Stress Analysis of Mandibular Unilateral Distal-extension with Extracoronal Precision Attachment

Nonlinear Aperture Stress Analysis of the Gravity Dam with a Hole

Stress Analysis and Numerical Computation of Pressure Vessel with Nonstandard Rectangular Cross Section

Three Dimensional Stress Analysis for the Joint Between the Tower and the Beam of Cable-stayed Bridge

Limit stress analysis of horizontal bar of bridge with simple-supported reinforced concrete beam strengthened by external cable

Establishment of the three-dimensional finite element model of the first permanent mandibular molar and its stress analysis

The photoelastic stress analysis of various prosthodontia design for mandibular first molar with hemisection

Stress analysis and strength study of hydraulic slotting casing

Stress Analysis of a Tripod Sliding Universal Joint with ANSYS Software

Stress Analysis of the Sewage Settling Tanks Before and After Installing a Scraping and Sucking Sludge Machine;

Fully Coupled Effective Stress Analysis of Geotechnical Engineering Problems Using a Critical State Sand Model

The Transient Temperature and Stress Analysis of Extendible Nozzle with Jettisonable Deployment System

Application of visual technology in thermal deformation and stress analysis of hydroelectric generator

Stress analysis of the numerical control omnipotence mill principal axis using ANSYS software

Three-dimensional finite element stress analysis of molar with hemisection prosthodontic therapy

Design and stress analysis of a new type self-anchored suspension bridge's anchorage

Application of Finite Member Element Method for Stress Analysis of Space Thin-walled Structure in Agricultural Machine Design

Pavement Structure Shear Stress Analysis Considering Stiffness Gradients of Asphalt Course

Global Stress Analysis and Discussion of Large-Span Prestressed Concrete Bridge with Rigid Frame- Continuous Girders

Stress Analysis and Structural Optimization Method of Connecting Ceramic Glut with Aluminum Alley by Compression Casting

Perturbation finite element method for stress analysis of horizontal well casing during thermal production

Stress analysis considering the anisotropic modulus of elasticity of the rolled concrete dam

Stress Analysis and Calculation of Suspended Pipeline Due to Geotechnical Hazards

Temperature stress analysis of concrete structure and prevention measures of temperature cracks

In-situ Stress Analysis of Toutunhe Reservoir in Luliang Oilfield and Its Application

Investigation of reflective cracking and stress analysis for overlay structure with large-size asphalt macadam

Stress Analysis and Optimization of Parameters of Coal Pillar in the Stoping Tunnel of Comprehensive Mechanized Coal Mining Face

An Equivalent Substructure Method for Dynamic Sensitivity Stress Analysis of the White Body

Stress analysis of the denture support structure on mandibular titanium framework

Stress Analysis of Eccentrically Loaded Steel-Framed Reinforced High-Strength Concrete Columns

Holographic Interference of the Stress Analysis in Optical Measurement

Stress Analysis of Steel-Concrete Combined Sections in a Cable Stayed Bridge with Single Tower

Stress Analysis and Structure Optimization of Steel Structure Framework of Three-Dimensional Garage

Computational program for three-dimensional stress analysis with boundary element method

Interfacial Stress Analysis of A RC Beam Strengthened with FRP Plate

Experimental Stress Analysis and Strain Measurement in High Temperature Conditions

Transverse Stress Analysis of a Partial Cable-stayed Bridge

Stress Analysis and Optimum Design of a New Type Front Mask of Quick Opening Closure

Stress analysis and intensity designs of the rotation shells under intrinsic pressure

Stress analysis of the ceramic-matrix composite during compression and sintering

Transient temperature and stress analysis of propellant grains during cooling process after curing

Stress Analysis of Partially Cable-stayed Prestressed Concrete Bridge with Cable Saddles Structure

Non-perfect elastic collision and impact stress analysis during dynamic compaction on collapsible loess

Reflection Cracking Resistance Stress Analysis of Large Stone Asphalt Mixtures Base in Asphalt Pavement

Design of a Medium-sized Ammonia Synthesizer's Shell by Stress Analysis

Research on Strengthening Concrete Circular-section Columns by Gluing CFRP and the Corresponding Stress Analysis

Stress Analysis of the Problem about a Circular Hole with Asymmetry Collinear Cracks

Three-dimensional finite element stress analysis of mandibular complete implant-supported overdenture retained by soft-liner material

Stress analysis of underground reinforced concrete bifurcation

Drawing and Stress Analysis Test of Rectangular Case of Metal Sheet

Temperature distribution and thermal stress analysis for turbojet engine turbine guide blade

Three dimensional finite element stress analysis of thoracic intervertebral disc in kyphosis

Stress Analysis and Reinforcing and Strengthening of Pier Structure in Yinzhen Hydropower Station

Computational and experimental studies on stress analysis of flat steel-box-girder of Runyang Suspension Bridge

A New Method for Stress Analysis of a Cyclically Symmetric Structure

Random Thermal Creep Stress Analysis of a Concrete Gravity Dam

Temperature-field and Stress Analysis of a Gas Turbine Rear Casing

Deformation and Stress Analysis of Magnetic Ring of an Active Magnetic Bearing

Structure Improvement and Stress Analysis of Dehydrogenation Reactor

Structure Arrangement and Stability-Stress Analysis on Intake Tower of Hydropower Station of Baise Project

Stress Transmission Mechanism and Effective Stress Analysis of Unsaturated Soils

Influence of Periodical Dynamic Heating Condition on Asphalt Pavement Wheel Load Stress Analysis

Effective stress analysis for the effects of liquefaction condition on ground motions

Stress Analysis on Asphalt Overlay on Cracked Concrete with Cavity Underneath Repaired with Bridging Slab

Stress Analysis of Large Steel Telescopic Caisson of Hangzhou Bay Sea-crossing Bridge During Construction

Stress analysis of three-dimensional finite element model of fixed denture on mandible posterior teeth by CT scanning

Steady Temperature Distribution and Thermal Stress Analysis for Double Hull Structure

Transverse Thermo-mechanical Stress Analysis of Laminated Composite Plates and Shells

Stress Analysis in Rectangular Drawing for an Integrity Flange

Stress Analysis and Dimension Optimize of a Special Tool-Post

Three Dimensional Stress Analysis of Double-tracks Railway Continuous Rigid Frame Bridge with Wide Box Girder

Stress analysis of the facets of thoracolumbar motion segment in the different motion states

Stress Analysis and Study of Thermal Stability of Enamel Heat Pipe

The stress analysis on filling and full crown restoration of the structure defect of the first mandibular molar

Stress Analysis of Cylindrical Prestressed Concrete Sludge Digestion Tank

The Collisional Stress Analysis of Reinforced Concrete Quadrate Container

Stress Analysis for Composite Laminated Plates with Internal Delamination

Secondary Stress Analysis of the Main Cable of Suspension Bridges

new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis;

The Stress Analysis of Reinforced Structure in Connecting Place of Internal Domed Bulkhead and Pressure Hull

Three-dimensional Finite Element Stress Analysis on the Periodontal Tissue of Maxillary Canine

Stress analysis of reinforced concrete's axial tension component under action of thermal difference

Stress Analysis of Copper and Its Alloy Strip after Processing and Slitting

Three-dimensional finite element stress analysis of angled abutments in implant-bone interface

Stress Analysis and Breakage Evaluation of Zirconia Ceramic Sleeves for Optical Connector

Temperature and thermal stress analysis of coal water slurry ceramic nozzles with finite element method

Temperature Stress Analysis of Hydrate Heat of Underwater-Indiscrete Concrete in Proof-leakage Layer of Dam

Stress analysis and strength calculation of the height toothed arc of mortar-howitzer

The transient stress analysis of the roll surface during laser strengthening

Stress analysis of integral reinforced structure under internal pressure

Space Stress Analysis and Test of Sand-barrel Used in the Bridge Construction

Three-dimensional finite element stress analysis of angled dowel crown in anterior maxillary teeth

Stress Analysis and Study of Pipelayer Jib Structure

Stress Analysis and Calculation of High-temperature High-pressure Process Pipelines

Three dimensional finite element stress analysis on different dental post materials

Stress Analysis for Reinforced Concrete Bifurcated Pipes in the Yellow River Diversion Project

Stress analysis of periodontal membrane of fixed abutment tooth with different thickness

The Deformation and Stress Analysis of Surrounding Rock for Underground Factory Building

Stress Analysis of Restrained Bending for Box Beam With Rectangular Cross-Section Filled by Honeycomb Core

Application of finite element method to stress analysis of alternator's coil when suddenly short-circuited

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

The stress analysis of the femur after total hip replacement-a finite element evaluation

Fracture Stress Analysis and Fracture Position Determination of Freezing Pipe

Influence by Space Stress Analysis to Continuous Curve Box Girder through Different Solid Element

Stress analysis of separators with different specifications

The Stress Analysis at Anchor End of Box Beam under Large Tonnage Prestress

General Theory on Stress Analysis of Laminated Composite Beam Pressed By Distributed Loading

Stress analysis and optimization of biomaterials for repair of dog segmental femoral defects

Comparison of Counting Method and Stress Analysis Method in Reliability Prediction

Tectonic stress analysis of normal faults mechanic characteristic

Stress analysis and design for tangential opening tubing connection on pressure vessels

Carbon Fiber Sheet and Stress Analysis of the Interface for Reinforced Concrete

Stress analysis of Opening Tubing Connection Zone for High Pressure Vessels Based Finite Element

Stress Analysis on Partial Pressure of Flat Anchors in Simple Supported-continuous Girder Bridge

The Finite Element Stress Analysis and Reinforcement Hoop Design of Three-column Centrifuge Drum

Finite element stress analysis for a latex separator's lock ring

Test Study and Stress Analysis on Inclined Section of Frame Beam Strengthened with Applied Prestress

Stress analysis and parameter optimization of coal pillar in gateway of fully mechanized caving face

Transient Temperature and Stress Analysis for Thermo-viscoelastic SRM Grains

Equivalent stress analysis for the base surfaces of arch dams by direct internal force method

Stress Analysis and Experimental Investigation of the Anchor System for Beipanjiang River Bridge

Assembly Stress Analysis on Multi-shrinking Extrusion Cylinder of Whole Wallboard Using FEM

Spatial Stress Analysis for the Four-pile-caps of the Bridges on Urban Rail Transit

Stress Analysis on Piston of Two-side Swashplate Compressor

Stress analysis of asphalt overlay with anti-cracking interlayer of geosynthetics

Stress analysis of fiber-reinforced plastics'pressure vessels with metallic liner

The technology and application of residual stress analysis by neutron diffraction

Stress analysis and approximate calculation of drawing force in the rectangular drawing

Displacement and stress analysis of infinite spatial plate under axial symmetric loads

Horizontal Restraint Stress Analysis for Full Length Placement of Mass Concrete Blocks

Experimental stress analysis of manual manipulation effect

Thermal stress analysis of experimental platform dynamic balance

Bending Stress Analysis on Backlash Adjustable Worm Transmission

Stress Analysis of Blind Flange on Pressure Balanced Expansion Joint Inside Laying Bellows

Thermal stress analysis for structural ceramics during laser beam machining

DXF files'interface and its application in stress analysis of arch dams

Finite Element Stress Analysis and Security Assessment of HV Porcelain Post Insulator

Structural Design and Stress Analysis of Non - standard Flange Connection System

Stress Analysis of Canine Movement Distal by Two Dimensional Photoelastic Method