spall

It is shown in the results that the process of forming wear debris is that of crack generation, propagation and spalling.

The automatic spalling of the insulation material at excessive temperatures could extend the service life of the equipment.

Big ZhuGongDan faded on the door, the door up by gold lacquer spalling and former buckish lead dust submerged in a blatant.

Simulation results indicate that the destruction form of rib spalling, floor heave and roof falling occur when the drifts are excavated.

Spalling is the result of rapid rates of heating, large compression stresses in the member and high moisture content in the member.

Adopting of failure criteria is one of major factors that restrict the mechanism research of dynamic spalling.

The elevated pore pressures must be quantitatively linked to spalling (fracture) of the concrete.

The spalling can be eliminated by improvement of the existing equipment construction.

Reflective crack caused surface cracking, spalling, surface water infiltrating along the seam, so that the road was damaged.

The bad: refers to the secret of coating have spalling. Peeling, sparkling wait for a phenomenon.

Erosion-resistance, spalling- resistance, high construction property and high working property.

The effects of the voids in the diffusion layer on cyclic oxidation and spalling resistance of aluminized steel was investigated.

When moisture content is over a critical value, the higher the moisture content, the more the spalling frequency.

Spalling phenomena is investigated and causes are determined. Proper maintenance can prevent spalling.

The results showed that the tube cracks, finned tube failure and spalling were caused by the temperature run-away of the converter.

Non-penetrating damage (dents) in the armor caused cracking through the armor and large scale interior spalling.

Prevention rib spalling mechanics of stepped cutting technology was analyzed by numerical simulation.

The surrounding rock of the upper face end is the key part strengthened the control of the rib spalling.

however, polypropylene (PP) fibre can constrict spalling arid reduce the spalling degree.

Moreover cracks were observed on cross section near coating surface, which causes spalling of coating.

From spalling mechanism, a series of experiments with samples aiming at high strength mortar were performed utilizing fuel furnace.

Spalling due to corroding of metal elements workmanship ?

To the later development of osteoarthritis, the articular cartilage degradation, spalling, will subchondral bone exposed.

Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

The spalling reason of the roller surface for cold rolling is complicated.

The working section is easily to rib spalling and floor heaving affected by mining and floor soft rock.

When heated to high temperatures, spalling of the outer layers of concrete occurs in some circumstances.

Damage Analysis and Modification of Longitudinal Joint's Spalling on the Airport Pavement Made of Cement Concrete

Causes for Surface Spalling of Finishing Back-Up Roll Used for Tandem Roller

and for the collapse and spalling, combined with the limit equilibrium method and the engineering geological;

Prevention and Analysis on Spalling of Back-up Roll Used for Hot Strip Mill

The research of improving the spalling resistance of the high strength concrete in the condition of high temperature

A novel experimental technique to determine the spalling strength of concretes

Under impact-abrasive wear with higher impact energy there exist an, optimal carbon content for resisting the fatigue spalling;

A Model of Computing Corrosion Rate of Reinforcing Bar Following Spalling of Concrete Cover

Relationship between crack growth and explosive spalling of high performance concrete subjected to fire

Explosive spalling damage features of lining concrete under conflagration

Availability Method of Rib Spalling and Roof Fall Prevention Under Dust Suppression by "Three Soft" Coal Seam Water Infusion

The Prevention on Surface Spalling of Supporting Roller and Its Ring in Rotary Kiln

Measures to improve spalling resistance of high strength concrete at elevated temperature

Explanation on film spalling from magnetic-controlled sputtering glass coating

Reasons Analysis and Preventions Measures on Rib Spalling and Roof Fall in Fully-mechanized Top-coal Caving Face

This could result in flaking and spalling of the metal noise rough motion and eventual failure

Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

Friction Heat Induced Phase Transformation and Spalling Mechanism of Train Wheel Steel

Explosive spalling rules of high strength concrete under high temperature and calculation for temperature field of column cross section

Effect of Voids in Diffusion Layers on Cyclic Oxidation and Spalling Resistance of Aluminized Steel

Testing method for spalling of refractory brick and plastic refractories

Determination of Coal Mixing Ratio by Adaptation of Curve Spalling and Peaking Method

Controlling of rib spalling of "three soft" seam using injecting water to wall with shallow hole

A New Statistical Meso-Scopic Damage Model and Its Applications in Spalling Processes

Experimental Investigation on Spalling of Railway Car Wheels

Mechanism Analysis of Surface Spalling of High Manganese Steel Railway Frog

influence of heat treatment on intercrystalline corrosion and spalling corrosion of 1420al - li alloy

Reasons and Treatments of Cement Concrete Pavement Spalling

High thermal shock resistance in preventing spalling;

Research on wheel tread spalling with the raising speed locomotive

Control of tailentry rib spalling in the neighborhood of district sublevel under mining-induced pressure

Dynamic Spalling of Copper Plates under Explosive Loading

Mechanism of the rib spalling and the controlling in the very soft coal seam

Experimental study on spalling of concrete of prestressed slabs in fire

Peeling (micro spalling due to thin lubricant)

Investigation on the Braking Spalling in Railway Wheels and Tyre Tread

Effect of Materials Parameter on Mortar Spalling and Prediction

Analysis and rectification measures of wheel tread spalling problem on type SR-1 self-steering radial bogie

Numerical Simulation on Dynamic Rock Spalling

Analysis of Gear Surface Pitting and Spalling of Fatigue in the Close Gear-driven

Analysis of the spalling on the camshaft of diesel engine

Coal wall spalling mechanism and control in fully mechanized coal caving mining face in Hetangou Mine

Cracking and spalling behavior of alumina scale

Spalling and Preventive Measures of Cast Hot-Strip Roll

Analysis of Cold Work Roll Spalling Failure of Temper Mill

Spalling behavior of oxide scale of high-speed steel roll

Research review on wheel tread spalling

Studies on Mechanism of Spalling of Rock Cover

Research on the Spalling of 45# Steel Under Different Strain Rate

Risk Analysis on Coal Mine Rib Spalling

Spalling phenomena analysis of brittle materials under three kinds of impulse loads

Such as: crack, crisp, spalling because of frost heaving of the tunnel lining;