spoke

Many worried that the Socialists had put too many sticks in the spokes of local business at a time of 20% unemployment across the country.

This device was a hub. It was at the center of a set of cables that radiated out to the PCs like the spokes on a wheel.

So, think of a rimless wheel , or a spoke wheel . But the spokes individually move in and out of the hub. So, it's a wheel- leg hybrid.

But with President Obama's support they are beginning to look like spokes in a wheel of industry reform and stimulus.

To hold the hub in place, insert a spoke through the cassette-side flange in the opposite direction of the first set of spokes.

On her eleventh birthday, her father bought her a convertible. The car had platinum rims and silver spokes.

The wheel was typically a large wooden wagon wheel with many radial spokes, but a wheel was not always used.

If the spokes are not within the acceptable range of relative tension, adjustments need to be made to the tension of the spokes.

As the wheel rotates while in use, the spokes that are on the bottom next to the ground actually lose tension momentarily.

Not sure what the damage would have been if the spokes were a bit looser, probably more rim damage and less spoke breakage.

He saw connections of a different sort: these people and incidents were more like the spokes of a wheel.

The criminal would be attached to a cart wheel and his arms and legs stretched out along the spokes.

My understanding was that if your bottom spokes go slack when just riding around your spoke tension is too low.

These rotary motors (see picture) resemble bicycle wheels that have had their spokes replaced with thin, black slivers of EAP.

The understanding used to be that the strongest wheels were built with galvanized spokes.

London landmarks given a makeover include The London Eye which has green beans as spokes and its pods made out of baby plum tomatoes.

New modern spokes probably would have been fine but those old ones were unable to take the sudden jolt.

A solid disk or a rigid circular ring connected by spokes to a hub, designed to turn around an axle passed through the center.

The roots of his creativity. Moments of meditation in the center spokes of the sunflowers at his home in Connecticut.

They should be happy to do this if you're buying a set of spokes from them, and there's a benefit to buying the spokes from them.

Metallic accents on the door panels and steering wheel spokes are another link to the exterior design.

Thoroughly clean the rim, hub, and spokes with a rag dampened with acetone or other solvent.

He would like to have as many legs as a wheel has spokes, and rotate about in the same way.

Angled roads radiate out of Chicago like crooked spokes from Grant Park's location in the center of the city.

The average tension is the sum of the individual spoke tension measurements, divided by the number of spokes measured.

Unlike typical rigid Ferris wheels, observational wheels have cables tensioned as for the spokes of a bicycle.

The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

Her bike had covered spokes, pedals, and gears, and she wore a blue dress with big shirt that fluttered in her wake.

" Family, religion, education and tennis are the four spokes of this family, " says Shriver, who has been Venus' mentor for three years.

The phone will use a tiny chip measuring less than one millimeter to detect unpleasant odors, a spokes- woman for Siemens Mobile said.

Government buildings, situated in the middle of cities, would be surrounded by "spokes" of museums, offices, and hotels.

What if the spokes were to be tied together with ropes?

Supporting evidence for the cone hypothesis includes radial spokes in the image that might run along the cone walls.

One at a time, place these spokes into every fifth rim hole (counting from spoke to spoke; photo 2 ) and add nipples.

In this case, the goal is to enable the spokes to exchange messages, but to do so in a secure manner.

Like spokes joined to a central hub, Asians have been more closely connected to the US than to each other.

Insert one of the shorter rear spokes into any hole in the rear hub's cassette-side flange.

The spokes, by both their radial geometry and sectional triangular configuration, can resist considerable loads and remain stable.

If so, install the spokes so that the bend (not the head) is against the countersink.

Some hybrid-fuel structures look like wagon wheels in cross section, with multiple oxidizer-injection ports set between " spokes " of fuel.

The bike shop guys thinks that I will eventually have to replace all the spokes because their not stainless steel.

Divide the sum of the recorded numbers by the number of spokes measured.

The stirrer member has an outer ring and a central hub which are joined by circumferentially spaced spokes.

Then place it in the rim, centered between the spokes already in place, and add a nipple.

The rim supports the weight of the bicycle and it's rider through the thin wire spokes that connect it to the axle.

It took me some time to stop worrying that the skirt would get caught in the spokes or the gears and she would fall off.

And, the galaxy's red spiral arms and the swirling spokes seen between the arms show dust heated by newborn stars.

First is its split operation across two airports in Shanghai, forcing it to maintain two hubs and two sets of spokes.

The end of the spokes are not concerned in the tension reading, only the middle.

Work on flat spots first, loosening an even number of spokes in the area to allow the rim to move outward.

Therefore, it is important to only compare the tension of a spoke relative to spokes on the same side of the wheel.

Strength comes from proper tension, evenly distributed through the spokes.

For the rear wheel, which has less tension on the left, turn the right-side spokes a half turn and the left ones a quarter turn.

Through your thought and actions the spokes of the wheels have become burnished, dented and bent.

Place riding-type stresses on the wheel by squeezing spokes or rolling the wheel while holding the axle and pressing down.

Steel spokes as the ridge and big bar as the girder that support the unswerving aspiration.

Wheels that are strong, reliable and long-lasting have spokes that are properly tensioned.

Butted spokes and aluminum nipples are lighter but require extra skill during truing and tensioning.

Starting at the valve stem you give a quarter turn, and then count three spokes and tighten a quarter turn, and so on around the wheel.

It helps to squeeze spokes on hand-built wheels at a shop or check those of another bike.

For installing a hub dynamo in a bicycle wheel I need be spoken spokes in specific length.

As explained above, the spokes on one side of a wheel may be tensioned differently than the spokes on the opposite side.

Cut a small section of scrap stiffener, slip it behind the spokes, and draw in the stiffener area.

After lacing, it's essential not to force the rim into true by tightening spokes.

However, we have "investment" is slow Niugu, its stock price does not rise very rapidly, of course, there are no major spokes-degree plunge.

Relative tension is the tension of a spoke in comparison to the tension of one or more other spokes.

The e-sail craft would then spin to deploy a giant structure of centrifugally stretched wires that resembles the spokes of a wheel.

Each wheel has two averages, one for the left side spokes and one for the right side spokes.

To ease truing and tensioning, apply grease or thread compound to the spokes and grease to each rim nipple hole.

Let the rim find its low tension trueness by loosening spokes.

The reason I'm using the WBI suite is that it provides an integration broker (hub) and a suite of adapters (spokes).

Determine the average tension of the spokes on the right side of the wheel.

Take deflection readings of all the spokes on the right side of the wheel.

fatter spokes and longer spokes will make a lower pitched sound than skinner or shorter spokes at the same tension.

Its five delicate double spokes leave a clear view of the discs and sliding callipers of the braking system.

When applied properly it will keep spokes from loosening and nipples from freezing for years.

Remember that when viewed from outside the rim, clockwise turns tighten and counter-clockwise turns loosen spokes.

With butted spokes, position the posts so they rest on the narrowest portion of spoke.

The rim is in pure compression and the spokes are in pure tension.

Two well known spoke manufacturers give different millimeter diameters for what they both call "16 gauge" spokes.

This opens the Array dialog box, where you can quickly create the other wheel spokes .

Finish lacing the cassette side by placing the remaining 7 (or 8) spokes through the hub, interlacing them, and adding nipples.

After three revolutions of the wheel you will have tightened all of the spokes in the wheel.

On rear wheels you'll notice that left-side spokes always feel looser than right ones.

Seat the nipples in the rim by grasping parallel spokes and squeezing gently.

The table does not include separate columns for butted spokes.

Tension is the amount of force pulling on a wheel's spokes.

Front and rear wheels require different-length spokes.

Round steel spokes are calibrated regardless of brand.

the wheel assembly has its own components , such as reflectors , rims , spokes , tires , and tire tubes . the.

It is like the spokes in the wheel.

You must have parallel spokes at the valve stem to provide clearance for pump heads.

Old gears are usually spoked, sometimes curved spokes.

But I tighten the spokes by sound.

After adding 4 or 5 rounds of tension it should be strong and the spokes tight enough not to loosen, which is the mark of the good build.

I don't think the heavier spokes make a stronger wheel.

This eliminates slack by making the spokes lie as flat as possible.

I mean, there are some spokes here, but let's assume that everything is here, so then the moment of inertia is MR squared.

Structural issues remain unaddressed, such as the overabundance of hub airports with too few spokes.

Gently tighten an even number of spokes to bring down high spots.

This further seats the nipples and spokes and relieves wind-up that can allow spokes to loosen later.

Yet Syria can put spokes in just about every wheel in the Middle East.

Below is a simplied Conversion Table showing only three spokes.

The spokes of the wheel diverge from the nub.

Also, ensure that alternate spokes lead to different hub flanges.

The conversion table is based on the diameter and size of the spokes.

Connecting thirty spokes with a nave, it becomes a wheel, only because they are not spokes and nave anymore.

the spokes in the proper direction before adding the second set.

Hazard: The shock absorber mount can break and the shock absorber can make contact with the wheel spokes, posing a fall hazard to the rider.

Like spokes on a bicycle wheel.

I have now replaced 7 spokes through the last couple years.

Each round there are 28 internal to the vehicle hub, an external rim of the car in the spokes.

It is much as spokes of wheels around hubs formed by Spanish peaks and Dike Mountain.

They dubbed these features in Saturn's B ring "spokes" because they looked like bicycle spokes.

Remember when I stuck that broom in your spokes.

Need a bid on a high quality 20 spokes link wheel.

It's OK to reuse old hubs (but not rims or spokes).

If spokes are loose they break because they flex, typically at the elbow.

Then I like the spokes to all the same sound.

You should have a hub and rim joined by 8 spokes (or 9 for 36-hole wheels).

Also, seat the head-out spokes by pulling each one outward with your fingers or by prying

Research on Aerodynamic Characteristics of Automotive Wheels with Different Wheel Spokes

Design of an Automatic Dividing Punch Mould for Spokes on Wheel Cranes

Numerical Simulation of Influence of Holes in Wheel Spokes on Automotive External Flow-field

Rotating pulley with spokes and projecting burr on face of pulley

Optimal Scheduling Model of Hub and Spokes Route Network

Elimination of Crack on A Large Scale of Gear with Double Spokes Board

Specification for steel wire for spokes

Spokes and Wheel Frames for Automobiles

Fig. 2 Schematic drawing of wheel hub with web spokes