sinter

linear movement . used for classifying sintered ore with temperature of less than 150 centigrade in metallurgical industry.

Experimental study of the tailings and tailings sintered, temperature, carbon amount to the effects of niobium chloride d.

The cutting disk can be manufactured ' from sintered or cemented diamond grit, or other hard materials.

Design of a certain companys production factory of sintered permanent neodymium ferro boron magnet are briefly introduced.

waxing your board every other outing, particularly if it has a sintered base.

The pulling flat contains a sintered compressed product having a chemical bond between a colloidal component and a fiber component.

How to work out a production plan and fixed number of labor worker in a sintered brick factory.

a circuit formed by two faces of copper foils of the ceramic substrate are interconnected and guided through a sintered via hole.

The wear resistance and antifriction qualities of the oil impregnated sintered bronze make for an excellent guide bushing.

It's faced with polycrystalline diamond sintered from diamond powder. It has extremely high hardness, abrasion resistance and serving life.

After we make it sure, We study the influence of the content of fly ash to the sintered clinker and confirm its largest dosage.

From experimental result, it was shown that copper powder was rapidly sintered under microwave irradiation with no oxidation.

Sintered stainless steel filters with high performance have been produced using reasonable process parameters.

The processing and its requirement on manufacturing bonded permanent magnets and sintered magnets by MIM are discussed in detail.

The carbon pick-up was successfully overcome and the final sintered MIM parts of excellent mechanical properties were produced.

Sintered hydroxyapatite ceramics is commonly used as artificial replacement material for its excellent biocompatibility.

RAILWAY ROLLING STOCK. DISK BRAKE LININGS MADE OF SINTERED MATERIALS.

RAILWAY ROLLING STOCK. BRAKE SHOE INSERTS MADE OF SINTERED MATERIALS.

POWDER METALLURGY. SINTERED MATERIALS INCLUDING HARDMETALS. MICROGRAPHIC EXAMINATION TECHNIQUES.

The results expatiate that boron carbide ceramics can be sintered in low temperature by approaches mentioned above.

The sintered state of honeycomb filled with alloy powder had great influence on the sealing performance.

The High-temperature sintered color quartz sand, Sintered triangle sand Coatings use French technology for the exclusive domestic products.

The invention discloses a sintered porous brick and a preparation method thereof.

The fractal characteristics of pore-structure on sintered porous stainless steel fibres were studied in virtue of the fractal geometry.

has carbide blade materials, and various ultra-high pressure sintered coating blade, have been standardized.

The present invention relates to far infrared enamel glaze, and is especially one kind of enamel glaze sintered onto iron pipe.

and newly developed and adopted techniques concerning the sintered material blending and pelletizing abroad introduced.

Organic binders are used in the blending process of immobilized desiccants to arrive at a housed but immobilized or sintered bed.

Powder forged parts generally are not as close to final size or shape as cold pressed and sintered parts.

Sintered density, hardness, bend strength, Young's modulus were researched as hot pressed sintering temperature changing.

POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.

POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. MEASUREMENT OF VICKERS MICROHARDNESS.

Magnesite Chrome Brick: Made from mainly sintered magnesite and chrome-oxide, by high pressure shaping and high temperature firing.

The watch-hands are made of blue steel sintered in high temperature.

The properties and advantages of bonded permanent magnets and sintered magnets made by metal injection moulding are reviewed.

With pure raw material shale, the tile is sintered in high temperature without glazed surface, and some products can be recycled and reused.

Foam glass was prepared with sintered process, using moderate amount of additives and the powder of stiff glass-fiber as main material.

and calcining the pre-sintered powder to obtain the rare earth cerium ion-doped yttrium aluminum garnet fluorescent powder.

The corrosion behavior of sintered NdFeB in nitric acid, hydrochloric acid, vitriol, phosphate and oxalic acid was studied.

adopting extra pressure maintaining technique to prepare the sintered blank of sputtered target material.

The combination properties of as-sintered alloys would decrease at other sintering temperatures and holding times.

POWDER METALLURGY. DETERMINATION OF THE OIL CONTENT OF POROUS SINTERED PRODUCTS.

ductility and machinability of sintered bronze oil bearings with microstructure is revealed.

In the sintering step, the glass layer is sintered while feeding the organobismuth compound into the glass pipe.

Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.

By using fused magnesia and sintered spinel as main materials and sulphite liquor as binders, magnesium compound side gate was researched.

Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.

Powder metallurgy. Sintered steels and alloys excluding hardmetals. Determination of total carbon and non-combined carbon contents.

The sintered-tempered compact has high hardness without performing the quenching process.

The oxygen content and microstructure of the prepared RE-TM cast alloys and sintered targets were preliminarily analyzed.

POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRONZES.

This paper describes a series of new bronze powders that produce sintered bearings with improved performance.

Quiet operation is assured as the Speedy Rail rollers are encapsulated in a sintered plastic compound shell that is resistant to pollutants.

The product eliminates the lag production process of the traditional clay sintered brick so as to greatly improve the product quality.

The wax models with high accuracy were sintered by filtering powder bed temperature of sintering process.

Sintered metal bushes. Determination of radial crushing strength.

Bearings: Choice between recirculating ball for heavy duty applications and sintered bronze for medium to light duty applications.

This will then be sintered in a suitable atmosphere to yield the required product.

It is made of high quality low-carbon steel strip, rolled and sintered tin-lead-bronze alloy on surface.

In one embodiment of the grid, the sintered structure engages through holes in metal sheets.

Plain bearings made from sintered material. Dimensions and tolerances.

Powder metallurgy. Sintered metal materials excluding hardmetals. Fatigue test pieces.

Technology of obtaining Zinc-based sintered coating with globular Zinc powder was studied.

A novel type of coated cutting tool material sintered with coated powders by Sol Gel process has been developed successfully.

Raw gangue is smashed and milled to certain granularity and then sintered for certain time at high temperature.

The density of sintered pellets increases with the sintering time when the sintering temperature is fixed.

POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRASS.

The results indicate that sintered body consists of different phases from surface to centre.

A supporting component and operating fluid are arranged in the casing body by powder sintered method.

Sintered metal materials, excluding hardmetals. Unnotched impact test piece.

Although the sintered magnet has lower density, its magnetic properties are good.

Sintered metal materials, excluding hardmetals - Tensile test pieces.

In fact, The High-temperature sintered quartz sand, triangle sand and shale are first and new developed by our company .

In addition, the invention relates to a sintered product, an electronic module, and new uses.

Because rigid sintered microporous tube have certain wall thickness, and the deepness of pores can also have apparent filtering effect.

The filtration mechanism of rigid sintered microporous filter tube is more complex than the flexible microporous membranes.

The density, shrinkage and hardness of sintered specimens were tested.

Pure aluminium sintered material was successfully experienced ECAP of multiple passes.

The exceptional tool performance of sintered carbides results from their very high hardness and high compressive strength.

In the paper, a generalized yield criterion is deduced based on the basic plastic deformation laws for sintered powder metallurgy materials.

and the blank formed by injection is defatted, desalted and sintered to obtain the product.

Secondly, glazed tiles by the glass frit and other raw materials and sintered ceramic tiles from the bad.

The added TaC and activate sintering and refine grain size in sintered tungsten block.

DURA-32 Zirconia Toughened Alumina (ZTA) bead was sintered from alumina powder and zirconium silicate powder.

The present invention provides a method of forming a shaped article having a matrix that contains sintered fly ash.

and a capacitor using the sintered body as one electrode.

The producing process of sintered brick using coal -fired fly ash is introduced combining to the practice in Douhe Power Plant.

When sintered keep a certain density, thesmaller grain size the sintered has, the greater the material's micro-hardness.

The present invention also provides a building element having a matrix of sintered fly ash.

the catalyst is set in the oxidizing catalytic filtering layer, which is sintered by alumina particle and metal oxide.

In this study, it is devoted to develop a nove1 natural antibacterial material of utilizing sintered oyster shell powder.

After the curing and the demoulding, the green part is debindered and sintered in a furnace.

BLFO ceramics have been odtained by two-phase sintered process, the d electric and ferromagnetic properties of which were studied.

In the meantime we have advanced Sintered Silicon Carbide (SSiC) production lines.

Such wires are of greater use than sintered pellets for many measurements and for applications such as magnets.

Hardmetals. Sampling and testing of powders using sintered test pieces.

Sintered hardmetals. Sampling and testing.

SW type desulfurizer is made from sintered dross of sulfurous ore and applied to removal of H_2S from marsh gas.

The comparing experiments of synthesizing sintered diamond compacts with metal binder are made in the infiltrating way and the binding way.

Besides, the sintered density, green density, dielectric constant and dielectric loss of BaTi4O9 compacts were determined.

In such cases sintered metallic linings are preferred because of their high thermal conductivity and freedom from fading.

Effect of V2O5 additive on sintered mechanism and mechanical properties of corundum ceramics is studied in this peper.

a sintering process that sinters the second degreased body so as to obtain sintered body.

A general UBET for compressible sintered powder materials in ax- ial symmetry is developed based on the mass constancy in the paper.

C. so that alumina on su*ces of the size-enlarged sludge particles 12 are sintered.

Special varieties of grinding with sintered corundum abrasives such as abrasive and fiber.

Creep and stress rupture (static fatigue) tests of pressureless sintered silicon nitride were carried out and researched.

The pressed pieces (green bodies) are sintered in vacuum furnace of pilot scale at 1440 C for 1 h.

In this paper, MoSi2 and MoSi2-based Rare Earth(0. 8wt%) composites were prepared by SHS, and vacuum sintered at high temperature.

The Preparation of Sintered Bovine Cancellous Bone and a Study of Its Mechanical and Chemical Behavior and Biocompatibility

Experimental investigation of the heat transfer for transpiration cooling through a sintered porous plate

In addition, there are some special species, such as abrasives, such as sintered corundum.

A Study of the Plating on the Surface of Sintered Clay Layer

Synthetic Lightweight Aggregate Sintered by Means of Powdered Apatite Tailings and Biotite

The nickel and nickel-phosphorus plated layer on the surface of NdFeB sintered magnets

Biological Assessment of Sintered Titanium Alloy for Dental Crown and Bridge by Means of Slip Casting

Experimental study of bovine bone morphogenetic protein combined with sintered bone in the treatment of bone defects

Study of Electrochemical Impregnation for Sintered Nickel Plaques

Densification of a sintered alloy and its effects on properties

Study of Dielectric Properties of PSBN System Ferroelectric Ceramic Sintered at Intermediate Temperature

providing a plurality of first metal powders, and after being sintered, the first metal powders form a plurality of supporting columns;

interface structure and distribution characteristics of vacuum fusion sintered ni - based alloy coating containing rare earth element

Optimization of secondary operations according to geometry of component made of low alloyed sintered steel

Research on the Thermal Corrosion-resisting Performance of the Sintered Wear-resisting and Heat-resisting Deposit Welding Rod

Numerical simulations and experiments of the sintered densification in selective laser sintering

The Effects of Process Technology on the Dielectric Properties of High-Permittivity High-Stability MLC Sintered at Intermediate Temperature

Determination of Normal Temperature Properties of Refractory Die Material Compatible with Slip Casting Core of Sintered Titanium Powder

Wollastonite System Sintered Glass-Ceramics and Its Application Progress

Study of Feasibility of Manufacture of Sintered Cellular Brick with Gangue and Furnace Slag

Study of Gas Cleaning with a Sintered Metal Mesh Filter

Permissible deviations in dimensions without tolerance indication for metallic sintered products

The dissertation about season form of sintered brick and tile production line

Sintered metal materials, excluding hardmetals - Metallographic preparation and examination

High Performance NdFeB Sintered Magnets Prepared by Strip Casting-Hydrogen Discerption-Pressing under Magnetic Field

Anisotropy of Mechanical Properties and Fracture Behaviour in Sintered NdFeB Permanent Magnetic Materials

Study of Forming Technology of Selective Laser Sintered Resin Coated Sand Cores

Study of Sintered Porous Coating Tubes with Composite Powder in Heat Exchangers

Cause Analysis of Scar Formation of Sintered Kiln in Production of Alumina and Its Countermeasures

Sintered metal friction materials - Determination of transverse rupture strength

Sintered Copper Structural Parts for Electrical Conductivity Applications

Sintered metal friction materials - Determination of compression strength

Microstructure and Properties of NiAl Intermetallics Sintered by the Spark Plasma Sintering

Study on the loading sintered porous brick made of mud from Yellow River

Test Method for Density, Oil Content and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings

Solid Reaction, Densification and Microwave Properties of Low Temperature Sintered Li Ferrites Prepared by Oxide Method

As-sintered hardmetal pellets used in heading dies; Dimensions and tolerances

Study of Chemical Impregnation for Sintered Nickel Plaques

Hot pressed sintered matrix composites for diamond tools and its densification

Study of the Magnetics Property of Cermets Sintered in Vacuum

Standard specification for sintered austenitic stainless steel structural part

Tissue engineered bone constructed by compounding zinc-sintered bovine cancellous bone with marrow stromal cells

Modification of Low Temperature Sintered CMS Microwave Dielectric Ceramics Doped with Nanopowder

Experimental Study on Friction and Wear of Copper-based Sintered Alloy and Copper-graphite Sintered Alloy against Stainless Steel

sintered metal materials - determination of compression strength at room temperature

Elementary Introduction for Production Technology of Coal Gangues Sintered Perorated Brick

Permeable sintered metal materials; Determination of fluid permeability

Magnetic materials - Specification for sintered soft magnetic materials

sintered metal friction materials . metallographic method

Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated

Sintered metal materials (excluding hardmetal)--Tension testing at room temperature

Corrosion Mechanism and Surface Protective Technology of Sintered Nd-Fe-Boron Permanent Magnetic Material

Study of the sintered ceramic foam filters for molten steel

The build scheme of a new factory that produce sintered coal gangue cellular brick

Effect of Subsequently Sintered Processing on Properties of Thick-Film Resistor Directly Fabricated by Laser Micro-Cladding

Plain Cylindrical Bearings - Oil-Impregnated Sintered Bronze Bearings and Cast Bronze Bearings

Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process

Effect of Rare Earth on Component and Microhardness Distribution of Vacuum Fusion Sintered Ni-Based Metal-Ceramic Composite Coating

Study on an integrated sintered metal screen moving granular bed filter

Preparation of Giant Magnetostrictive Sintered Compacts by Powder Metallurgy

Development and Industrialization of High Performance Sintered NdFeB Magnets

Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets

Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)

Effect of heat treatment temperature on microstructure and fracture strength of reaction-sintered silicon carbide

Application of Low Temperature Fusion Phase Sintered Abrasion Resistant Ceramic in Fluidized Bed Boilers

An Experimental Research on Different Temperature Sintered Bone as Carrier of Bone Morphogenetic Protein

Electroless Copper Plating of Non-Metallic Particles and Its Effects on Strength of Sintered Friction Materials

Microstructure and Properties of Short-fiber-reinforced C-SiC Composites Fabricated by Hot-pressing Sintered

Nonlinear Magnetic Properties of Low Temperature Sintered Ferroxplana

Sintered metal friction materials - Determination of tension strength

Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)

The Effects of Rare-earth Elements on the Performances of Sintered Cu-Mo Steel and its Mechanism

Preparation and sintering mechanism of reaction-sintered silicon carbide ceramics

Research on Rotary Ultrasonic Machining Sintered NdFeB Permanent Magnet Workpiece

Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content

Influence of elements powder pre-alloying technology on microstructure and property of sintered alloy-steel

The influence of characteristics of ultra-fine MCMB powders and molding conditions on the properties of sintered bodies

Development of Sintered Load-Bearing Porous Bricks Made of High Volume Fly Ash

Investigation of sintered diamond segmented saw blade for prevention from breaking during working

Research and Contrast Experiment on Dressing Dish Diamond Grinding Wheel with Diamond Powder Sintered Bar and Cup Wheel

The plastic deformation and yield criterion for compressible sintered powder materials

Study on reasonable heat distribution for sintered brick biscuit with high addition of fly ash in full interior combustion

Technical application specifications for sintered clay hollow bricks

Generalized Yield Criterion for Sintered Powder Metallurgy Materials

Saving resources, adapting market and energetically expand sintered porous brick

Measurement of Fly Ash Addition in Sintered Brick by Way of Relative Apparent Density (Gravity)

Filtrating Characteristics and Application of Metallic Fibre Sintered Felt

Solution of diffusion equations and distribution of alloying elements in sintered materials

Microstructure and Wear Characteristic of Thermal-Sprayed WC-Co Mid-Temperature Sintered Coating

Effects of Cryogenic Treatment on the Magnetic Properties of the Sintered NdFeB Magnets

Study of Mechanism of Kaolin Sintered by Microwave Heating

Application of Powder Injection Molding Technique in Sintered NdFeB Permanent Magnets

Hard plastic extruding and one time palletizing burning technology for full coal gangue sintered porous brick

The detection technique for compress strength of sintered clay perforated brick by resilience method

Summary on the bench test of filtering the primary brine for diaphragm electrolysis using PE sintered tubular filter

Adhesion of low-temperature sintered silver paste applied for semiconductor chips assembly

Engineering Calculation of Deformation Force for Hot Repressing of Powder Sintered Preform

An Investigation on Factors Affecting Sintered Zinc-Rich Coating Solidification

sintered metal filters; liquid nitrogen; pressure drop; filtration;

Ultrasonic Examination of Sintered Refractories

Standard Sintered magnesia Large Crystal Sintered Magnesia Fused Magnesia

Photoluminescence and Electrical Resistivity of Solid-Sintered Porous SiC

Ecological Hazards of the Piled Coal Gangue and Development of the Pure Gangue Sintered Perforated Bricks in Xuzhou Mining Areas

Magnetic and dielectric properties of low-temperature sintered hexagonal ferrite for multi-layer ch

Application of the programmable controller in sintered burden

Influence of the Raw Materials and Raw Mix on the Activity of Sintered Pure Calcium Aluminate Cement

Effect of Milling Process After Hydrogen Decrepitation on the Magnetic Properties of Sintered NdFeB Magnets

Investigation of interface diffusion behavior of sintered bulk of nickel-coated copper powders

Influence of sintered and foamed electrode on electrochemical performance in high-rate battery

Developing Trend of Sintered NdFeB Permanent Magnets Produced by Powder Injection Molding

Sintered metal materials, exluding hardmetals - Determination of apparent hardness - Materials of essentially uniform section hardness

Effects of the addition of lubricant on the magnetic properties of NdFeB sintered magnets

Sintered metal friction materials - Determination of density

Manufacture technology and controlling for sintered hard ferrite magnets

Present Status of Research on Sintered Soft Magnetic Metallic Materials by Metal Injection Molding

Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test

Process Principle and Techniques for Sintered Glass-ceramics of Wollastonite System

As sintered hardmetal blanks used in reducing dies for standard bolt

Machinability of powder metallurgical sintered steels

Wear Mechanism of Reaction-sintered Silicon Carbide Composites in Dry Friction Condition

Effects of Sintering Atmospheres on Microstructures of Sintered NdFeB Magnets

Plain bearings of sintered metal with specific requirements for small electrical motors and micro motors - Part 3: Requirements and testing

Standard Specification for Sintered Uranium Dioxide Pellets

sintered bimetal material - determination of shear strength

The developing orientation and advantage of sintered shale brick

Probe into Manufacturing Technique and Equipment for High Volume Fly Ash Sintered Porous and Hollow Brick

Electroplating Nickel Technology for Sintered Type Neodymium Iron Boron

Analysis and Countermeasure for the Crack on Sintered Carbide Tool in Welding and Grinding

Effect of Minor Grain-Boundary Alloy Addition on Mechanical Properties and Microstructure of Sintered Nd-Fe-B Magnets

Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets

Study on tribological properties of sintered ferrous alloys reinforced by SiC particles

Research on high-strength sintered fly ash aggregate and lightweight aggregate concrete

Influence of process parameters on the pore characteristic of porous aluminum by powder sintered

Study on Deformation and Densification of Powder Upsetting for Fe-based Sintered Porous Material

Study of Gas Cleaning with Sintered Metal Filter Medium

Superiority and Significance of Sintered Fly ash Brick Project Developed by Coal-Fired Power Station

Synthesizing Sintered Diamond Compacts with Metal Binder in Infiltrating Way

Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys

Anti Checking and Disposal of Wall with Light Weight Concrete Sintered Aggregate Building Block

Investigation on Calcination and Mechanism of Sintered Brick Containing Large Volume of Fly Ash

Feasibility study on manufacture of sintered perforated brick with coal gangue and furnace slag