burr

The places Passengers can reach are not allowed to have exposed sharp edges, burrs, monoceras and dangerous material, convex knife.

If a cover design-time to set aside the bottom side of the head, burrs, and sizes, this behavior completely avoidable.

Check the surface of pipes to avoid burrs and sharp angle, which could spare all damages to wires in the process of installation.

Coating the outer wall are protein fragments that resemble burrs, the hooks that bristle around the outside of certain seeds.

Thread-bound book cover general paper is to use the same color as the book block of burrs, paper, or green-blue coloring sheet.

Finally select the subtraction, material Park, select simple layout, and to the refined burrs, and this form of binding.

Provided with a burr-trimming cutter, the bias-adjustable device can remove automatically the burrs on the polished rod.

Only a single side of burrs, and paper making and membership card production, mainly for the ancient books available.

The stacks must be free of oil and blanks to have burrs oriented in the same direction.

Tungsten-carbide rotary burrs like a milling cutter with handle, is used in that complex inside of mould machining finish machining work.

Burrs, slivers, scabs and weld spatter visible following blasting shall be removed and the area re-blasted.

drilling and fine blanking as well as the burrs formed on curved surfaces.

Turbulence - burrs left on the cut tubing causes a tumbling effect causing localized erosion and eventual failure.

A closing wedge can be created with use of sequentially larger burrs , with the opposite cortex and periosteum left intact.

If the tank is made of sheet steel, clean it thoroughly to remove all dirt, chips, and burrs.

Slide shaft into bearing bore, shaft must be straight, true and free of nickes and burrs. proper aligned in the housing.

To facilitate customer manipulation, strips of stainless steel are rolled to smooth the edges and remove any burrs.

Second, obtains closed but including burrs contour lines by using contour lines connection and deformed dilation.

The inside and outside surface of casting shall be smooth, sands, oxides and burrs on the un machined surface shall be removed.

The silkscreen should be clear , without burrs and sharp edges, and the dimension is accurate.

The crimp shall be generally symmetrical with minimal burrs .

The main defects are deformation and burrs of cutting surface in the square pipe end.

An electromagnetic punch, however, stamps its hole without tearing the metal, which means no burrs are left behind, and it never gets blunt.

The silk-screen should be clear, without burrs, and the dimension should be accurate.

After forged steel workpieces are remove burrs, coarse grinding cutting etc.

Rough edge paper burrs, paper thin, drizzied conservition, was pale yellow, there is no anti-moisture performance, better ink absorption.

Remove all slivers and burrs left cutting the tube, by reaming and filing, both inside and outside.

Parts to be clean ad free of MFG oll, burrs, and sharp edges.

In this case, the researchers created burrs that stuck to proteins found in the lining of blood vessels.

These units are specially suited for the removal of strong burrs and intensive radiusing of small to mid-size parts.

Also check that the adjoining pipework is clean and free from debris and burrs.

Appearance: No harmful flaws, cracks, burrs, bends and other harmful defects permitted.

The centers must be aligned and the mandrel must be free of burrs.

Check for loose dowels, shims, burrs, dirt between surfaces, etc.

Clean and inspect ring gages for nicks and embedded metal filings and burrs.

Stacking of thin specimen is permitted provided they are that, parallel, and from dust or burrs .

There are usually burrs in the fracture of thin sheet parts stamped with steel blanking die.

high precision. all edges without burrs, brake sharp edges.

Removing scratches or burrs for welding side of hairline.

Requirements for coating is 2, smooth without burrs and blistering, leather, etc.

Using a tube cutter, cut tubing squarely and remove burrs .

Cutting planes should be clean, free from burrs or sharp edges(Electric resistance between lugs: under 0. 5 Ohm).

After using the die, the end plane of the work piece was fine with no burrs, and die life was long.

In the analysis of samples often see some label burrs, this is more due to the material, the formation of natural fracture.

Cut, torn away without burrs, glazing.

Paerboard business card printing and membership card production, design, text, burrs how to solve?

Wax must clear them one by one, in addition to sewing, burrs and dirt.

It can remove burrs and fine powder on the tablet, with no static electricity generated.

Hardmetal burrs; terminology, nomenclature, general survey

Visual inspection, abrasive grinding Acc. Criteria: All minor defects like burrs and spatters removed

Research of the Punching Mechanism and Craft for Rotary Screen Plate Punching without Burrs

With the punching mould, the punched holes are clean, free from the burrs, standard and regular;

Parameter Design of Hydraulic Power Device for Back Punching in Punch Process Without Burrs

Formation and Forming Change of the Feed-direction Burrs in Turning

Research on New On-line Inside Burrs Removing Equipment of Longitudinal Welded Pipe

Processing of Cylindrical Three-dimension Fins and Formation of Burrs

Die cutting and shaping of burrs of various Amasilium alloy die casting products, whole cutting of plastic products;

Design of the Blanking Die for the Shelf-Fixing Block of No Burrs

Hardmetal burrs; cylindrical round nose burrs

Quality Control of Passivated Zinc Parts After Burrs Removing by Heat

Study on the Laser Technology Removing Burrs of complex shells

Specifications for rivet burrs for aircraft

o Repairs: filing down of burrs or sharp edges after anodizing the crown

Hardmetal burrs; conical pointed nose

Hardmetal burrs; inverted cone burrs

Hardmetal burrs; conical round nose burrs

a clear light, such as graphic dot dot dot consistent quality, and without burrs on the side;

Research on Wear Resistance of Unsmoothed Surface with Regular Burrs

Hardmetal burrs; arch pointed nose burrs

Design of New Style Punch Die Without Burrs

Formation and Control of Drilling Burrs

Hardmetal burrs; arch round nose burrs

finished part to be free of all burrs

Remove all burrs and sharp edges , clean the oil

any burrs with sharp point or sharp edge

Burrs and grains from cutting