The Pipe

The pipe changes itself one after another, and it seems to be the trace of the conductor's baton in an orchestra.

How much more complicated is the actual, situated work the pipe-fitter performs?

The newspaper did not say that Phelps was smoking marijuana, but it pointed out that the pipe typically was used for that purpose.

You put one of your ears close to one end of the pipe while your friend taps the other end with a hammer.

At least one pair of holes symmetrical with the pipe axis as the center are arranged on the net pipe.

Pipe wall electrostatic effect is often produced in the pipe of air-solid phase pneumatic conveying.

Michael continues trying to pull down on the pipe, but it won't budge.

Crews then turned to placing a cap over the pipe -- not to stop it, but to direct at least some of the oil to ships on the surface.

The body will go down and disappear under the water, and the murderers will then go down the pipe themselves, and swim across the moat. '

When he took the pipe, he left the store with slow unsure steps.

This energy heats oil flowing through the pipe, and the heat energy is then used to generate electricity in a conventional steam generator.

The snake rose out of the backet and began to follow the movements of the pipe.

He ran his hand over the pipe to see if it was hot before grabbing it.

The snake rose out of the basket and began to follow the movements of the pipe.

If it were not, the main thread could become blocked trying to write to the pipe.

Dupin took the pipe out of his mouth. "Perhaps the mystery is too simple, " he said.

The pipe fitting is divided into a socket part (1) of two ends connected with a tube and a central bending part (2).

And then a water pipe bursts in your bathroom and you spend a stressful morning trying to clean up the mess and get the pipe fixed.

But the pipe has one major detractor: It's something of a black box.

thirsty? " grampy asked, never removing the pipe from his mouth. "

should be installed in the burr, clean and remove the stolen goods, do not make it into the pipe to prevent blockage of the trachea.

The old man took the pipe out of his mouth.

Here the pipe is divided over the height into a sufficiently large number of cylindrical sections.

Explanation: Connecting the Pipe Nebula to the bright star Antares is a flowing dark cloud nicknamed the Dark River.

If oil is struck, a cover is firmly fixed to the top of the pipe and the oil is allowed to escape through a series of valves.

is varied from its minimal to its maximal value with a constant diameter of the pipe.

Then the edge points of the pipe are extracted by Facet model. The cylindricity error can be obtained by the least square cylinder.

Click on the mouse pipeline it overturned , even around the pipe into a closed loop will be eliminated .

a second customer leaning out of a dilapidated window patiently waits his turn, while smoking the pipe of peace.

Traffic load was the main reason of the pipe deformation. Appropriate increase in pipeline depth could increase pipe life.

You cannot master everything in life so stop pretending you know everything from fixing the pipe to cooking and evenaccounting.

Note: The front two numbers indicate the inner diameter of the pipe, and the back two indicate the outer diameter.

The opium in the ceramic bulb at the end of the pipe will vaporize when a hot coal is applied to it.

The decided to break the pipe open and immediately found what was haunting the house.

Mayor Bloomberg said the explosion at the 83-year-old steam pipe may have been caused by cold rain water seeping into the pipe.

Many famous sites in our Galaxy are visible, including the Pipe Nebula and the Dark River to Antares, seen to the right of the Milky Way.

Upon completion of the closure device will be used to plug into the next block to the hole in the pipe flange blind flange lock and seal.

By sweeping a laser along the pipe to change the local wave speed, physicists might be able to create a horizon.

C and by all the pipe by heat treatment should be one of the hardness testing, and provide corresponding hardness report.

Praise Him with the tambourine and with dancing ; Praise Him with the stringed instrument and the pipe.

Flexible Couplings can endure a certain terminal load, which refers to the load along the pipe axis to be borne by coupling grooves.

Father told me to unblock the pipe to let the water run through.

The pipe is too hard to be milled easily which makes the efficiency of it to be low.

Mrs Parsons brought the spanner. Winston let out the water and disgustedly removed the clot of human hair that had blocked up the pipe.

Now the end of the Pipe should be defined in the same way. The desired main flow direction can be changed with help at the Direction button.

The pipe chains commands in sequence, where the output of an earlier command becomes the input of a subsequent command.

Article 33: The main fixed pipelines connected to equipment shall be marked with the name of material inside the pipe and flow direction.

When they erupt , diamonds are thrown out of the top in the lava or are left in the pipe, the central, vertical part of the volcano .

To replace the sprinklers, we could punch holes in the pipe with a hammer and nail and let water dribble out to the plants.

Continue to hoist the Top Drive until the pin of the pipe to be added is above the box of the pipe in the slips.

thickness, permissible with a given value of the pipe diameter, the diameter is increased by a determined spacing.

The continuing leakage is the result of the long crack in the pipe.

Note: Since a bending force is exerted on the pipe during make up, the tool joint connection must be set in the slips as low as possible.

When no fluid is flowing through the pipe, the initial response is due to an ambient temperature drop and the valve begins to open.

The client processes then connect to the other end of the pipe and then pass data back and forth by reading from and writing to the pipe.

I've got a question for you, Fish. What if we do all this work, and the pipe is ten feet that way? - It won't be.

After the adhesive is solidified, the pipe and the pipe joint body are screwed into a whole through the screw plug.

It mounts inside the pipe or at the bottom of a rectangular channel.

First, the workers put some hot glass onto one end of a long metal pipe . Then they start blowing from the other end of the pipe.

They've made it through the hardest part and he tells Sucre, Abruzzi and Lincoln that they'll be into the pipe by Friday.

In the grates below, the chemicals are hissing, beginning to corrode the pipe.

Blister. A raised spot on the surface of pipe caused by expansion of gas in a cavity within the pipe wall.

"You wrap wet towels round the pipe, " I said.

Most patches were fabricated from material cut from pipe having approximately the same diameter as the pipe to be repaired.

Jerk the front chuck open , loose the rear chuck and then take out the pipe.

The method can overcome the influence of the pipe thickness, effectively eliminate the system error, and has good accuracy.

If soil movement is large, the pipe strain is controlled by the length of the landslide.

Here the petrol was gushing out of the end of the pipe and running over the floor.

The plumber used an elbow to run the pipe around the corner.

The hollow part of the dripping hat being higher than the pipe opening of the input liquor is embedded with a medicine charging rubber plug.

Warm wet plastic came out of the end of the pipe.

Before setting slips, make sure that the pipe is stopped, set slips by hand. Do not throw or kick the slips in.

The differential pressure gauge has back plate mounting (see that) standpipe fixed (the pipe with clamp).

The participants are not allowed to put any extraneous matter such as chalk, filter or similar materials into the pipe.

People in Hong trees on several holes and inserted into a hole in the pipe, oil will be discharged.

The pipes needed anticorrosion coating must have the mark that allowed doing anticorrosion. The pipe number must be marked in the pipe.

After the pipe has been created (or if one already exists), each pipe's output is read into the recorded event variable for that window.

Local buckling is assumed to be avoided if the maximum bending strain in the pipe remains below the predicted critical buckling strain.

the resin can be stirred and mixed by rotating the swallowtail-shaped mixing board on the top of the pipe body.

Therefore heat can be transferred to the water very fast, and the pipe system itself does not absorb too much.

The organizers will also send a sample of the pipe to any club on request, against payment.

Although oil pumping into the pipeline has stopped, the residual oil in the pipe is now the main concern.

and as we know what will happen that the water will pass up the pipe and down on the right hand side.

And points out simultaneously it is convenient , reasonable and economic for the pipe product to be tested for its fracture tough. . .

The use of CT in sour service has increased by job number, job complexity, pipe size, and the stresses to which the pipe is subjected.

if the wettability of earth layer is oil wet, all the irreducible oil can be displaced except the layer of oil film on the pipe wall.

At the bottom of the pipe there is a generating set converting heat energy into electrical energy.

In the summer, the process reverses, with the pump sending water and glycol into the pipe to help cool the house.

Pipe jacking construction may induce disturbance of soil around the pipe and result in ground movements.

After clattering along the grating for several minutes, we reach the back of the machine. The pipe crew is busy adding new plumbing.

The front end edge portion 4 is formed by inwardly pressing and deforming the front end portion of the pipe body 2.

Then say that you sprayed a little WD-40 into the pipe, or put in a tiny drop of gasoline.

Thermal protection components installed in the pipe, one end fixed and the other end connected to the free guide with a small shaft.

Einstein in the legendary life, the pipe can be said of his faithful companion.

The free end of the pipe portion is in fixed connection with the pipe clamp by screws.

It also said it plans to deploy 'silt fence' barriers around the pipe to further guard against contamination.

It was measured by using flattened plate sample generally, so in fact it is not the true yield strength of the pipe body.

Be careful not to let soil fall into the pipe from the top.

But some parts of the pipe were up to 80 per cent corroded.

As I was in the act of lighting the pipe I caught sight of my own countenance in the glass.

Riveting the hand on the pipe, with the help of a staking tool, is a meticulous task that demands optimal precision.

The pipe was found to be disgorging dangerous chemicals into the sea.

The pipe symbol indicates that the message's contents should be sent as input for the indicated program: a Python script named aci. py.

Advancement of the outer ring over the inner ring radially compresses the latter thereby resulting in swaging of the pipe.

This forces each file (the %s is a placeholder for the file name) to be pre-processed (hence the pipe, |) by tac.

A vacuum pump pulled the products of combustion through the pipe and exhausted them outside at the end of the run.

If the calling code does catch the exception, the pipe consumer will still see the error, but there will not be a duplicate error.

This means that if the center line of the pipe has a clearance of 40mm or more, the pipe does not has to be cut.

The valve body expansion pipe is only used to open or close the valve, but can not replace the expansion pipe in the pipe.

connector should be chosen with the body on the pipe threads consistent.

It was then quite easy for us to tie one end of the thread to the electric wires and pull them through the pipe. '

Last, a technology is presented to detect and locate leaks by the correlation of leak noise at two locations along the pipe.

Finally, the pipe is reconnected to the system with standard fittings and excavations are re- instated .

We slid down the snowy slope at the mouth of the pipe that seemed immense then but was really only five feet in diameter.

In the pipe, the pressure consists of three parts of fluid dynamic, pipe operation pressure and fluid density pressure.

The water from the Dabieshan Mountains is boosted through the pipe lines to the major water treatment plants of the city.

The actual implementation of a pipe instance is typically through the pipe service.

Pig receiver& launcher shall be horizontal, and the diameter of pig valves shall be equal to the inner diameter of the pipe cleaned.

Seal the blind plate and check carefully whether the pipeline is correctly connected and block phenomenon in the pipe before pressure test.

Knowledge and rules on pipe were used during the pipe layout to ensure the rationality of the pipe layout results in engineering.

Determined the pipe route by the spline interpolation whose nodes were the centers of polygonal largest inscribed circle list.

He or she then blows through the pipe so that the glass expands into a rounded bubble form.

To the pipe end by pulling the rubber ring over the beveled end of the spigot.

Further examination showed that the pipe was heavily corroded at the section where the fracture took place.

Internal line-up clamps are fitted with shoes or blocks that in operation are pushed outward against the inside of the pipe.

A kind of lid was fixed to the top of the pipe, and the oil is allowed to flow out gently through taps.

Second, the electric submersible pump connected to the pipe thread pretightening force enough (or not pre-torque).

He also checked for gas leaks. We had one! It was a tiny pinhole leak on the pipe behind the meter.

Additionally, it was found that placing the pipe in tension significantly increased cutting performance.

Listing 3 shows the continuation of input reading and the beginning of the pipe management.

The pipe laying is an important facility in the depot, and its broken will affect the normal running.

The oil company maintains there is no reliable way to measure the oil spill by analysing oil moving out of the pipe.

A remote procedure mechanism allows for communication between client and server, with GWT handling all the pipe and data translation.

He said follow the pipe. He said follow the pipe.

the seismic isolation effect analysis for the pipe segment under strike slip faulting containing normal(reverse) fault component.

Boiling hot water wash is to clean the pipe to be placed in boiling water in the pool, cleaning.

These patches ranged in size from a couple of inches across to several feet in the length and covering half the circumference of the pipe.

Changing frequency to control the starting and shutting, no pressure fluctuating of the pipe network, low noise while operating.

The temperature of the pipe during application shall conform to the recommendations of the coating manufacturer.

The lexical handler doesn't do much: It simply forwards the events to the next filter in the pipe, but the XSLT processor requires them.

Even with a ragged cut the base fits the pipe perfectly and is ready for welding.

A scheduled 2003 inspection was never performed because the pipe was covered in snow and the company never returned to do it.

Anyway, as he ran through the pipe, he pulled the thread behind him.

The pipe is 4 feet in diameter, and up to 2 million barrels (or 84 million gallons) of crude oil can be pumped through it daily.

The two cones of the sealing sleeve are respectively pressed and sealed with the pipe fitting body and the inclined plane of the screw nut.

The pipe clamp of the utility model breaks a traditional process method on design manufacture, and utilizes through holes for process.

The results show that the device can avoid the influence of bad straightness of the pipe and advance the machining quality.

Joints should be installed on the pipe thread wrapped with the appropriate raw material to ensure the reliability of sealing.

The pipe moves through these stations as the lay barge proceeds along the pipeline route.

Slag vacuum machine is especially designed to clean the slag or other garbage produced in the pipe.

c. Stainless steel pipe cutting machine, band saw, GF saw, clamp etc. such material should be the same as the pipe or the same category .

Due to the existence of electric submersible pump Kau, so connected in the pipe thread Department has set up anti-down block.

XMLFilterImpl already implements most of the ContentHandler, blindly forwarding events to the next filter in the pipe.

The pipe supports surrounding the valve must be loose and the adjoining piping must be well aligned with the valve.

The bending, deformation, and stress of the pipe section with the smallest curvature radius are analyzed, and the causes are studied.

The problems existed in the machining for the pipe die have been analyzed, and the improving measures have been put forward.

This led one contemporary to brand him as the pipe-sucking prime minister's "financial Rasputin" .

When the male mouse heard the female mouse's squeaks, he rushed along the pipe to help her.

This coefficient can be calculated with the pressure values from four pressure sensors on the pipe.

And the pipe is also featured with materials saving, cost saving and safe use. The casing pipe is mainly used to protect cable ends.

Conventionally the other end of the pipe consumes SAX events and outputs a document.

The pipe flow behavior of water suspensions of wood pulp and synthetic fibers has been the subject of many investigations.

With this method, the water noise signal can be separated from the pressure-noise mixed signal in the pipe lines.

For the pipe network structure groove cut, general factory or customer is first the pipe cutting down, again to manually polish groove.

Through the technical economy analysed for the pipe keeping water supply engineering .

The utility model is suitable for the water supply irrigation area of the pipe network of the modern agriculture.

The floor men pull the tongs around the pipe until the lines are firm.

Emptying tanks of air, make tanks into the vacuum state, and then through the pipe to the sewage pumps outside tanks.

The Pipe Type Centrifugal Separator of High Separation Count And Rotational Speed had already obtained the national patent in 2003 .

But to saddle the junction of the pipe line and groove cut, using manual cutting and grinding way, cutting quality, it is hard to guarantee.

tappings to the transmitters should be taken from the same side of the pipe, and for 2-out-of-3(2oo3) installations.

And the pipe connection mode: direct welding ( most commonly used modalities ), flange joint, thread connection, a socket type connection.

Until now this process wasn't possible on small sites because the pipe allowed oxygen to seep in and that stop the breakdown process.

I might as well have gotten, "I already have several scalp projects in the pipe. "

Keep feet well clear of the drill pipe pin end when the drift is still in the pipe and the pipe is vertical.

The pipe line invests are a very important part of oilfield surface project.

Likewise, the infants who looked at the solid in their first trials stared longer when later the pipe was lowered into the liquid.

A problem of discontinuance of using the whole pipe due to photographing of the interior of the pipe can be prevented.

Suwon in atmospheric pressure of water (or water) through the pipe network under pressure to the water pipes into the inside.

Michael removes a single button from the jacket and throws it down the new pipe. The button clatters down the pipe's gentle downward slope.

The pipe racks are moved to and from their stored position by a hydraulic cylinder attached between the mast frame and the lower swing arm.

The allowable stress of the pipe material shall be chosen from the data of GB 50316 Design Specification for Industrial Metal Piping.

Many notable sky objects are visible, including dark strands of the Pipe Nebula and the reddish Lagoon Nebula to the tower's right.

This article introduces, discusses and analyzes the test of Elaectro-magnetic technology for the inspection of the pipe end blind area .

Gets the pipe object that allows the caller to send result sets, messages, and the results of executing commands back to the client.

To improve university and migration of the modeling, designed the pipe net modeling system with OOP technology.

As described in the previous section, after the TestPipe program connects to the pipe, it waits for another program to connect to it.

Results show that the torsion of the pipe has turning and deforming effects on the secondary vortices.

The pipe dropped from the fingers of the Red-Handed, and he slept the sleep of the conscience-free and the weary.

Wipe away all loose dirt and moisture from the pipe O. D. and fitting I. D. with a clean, dry cotton rag.

The drift diameter is the inside diameter (ID) that the pipe manufacturer guarantees per specifications.

This Standard is applicable to the pipe-line-distributed commercial natural gas with preliminary treatment in the gas field or oil field.

By virtue of the pole pieces and the feet, the magnetic flux from the magnet is condensed before it is applied to the pipe.

In looking at the previous code before the pipe, a byte stream of the files is created on the standard output.

The pipe-still consists of a brick-lined furnace, in which is fitted a battery of tubes, through which the crude oil is pumped.

Look, mum! There he is! The man with the pipe in his mouth.

Once the heavier mud is in place and the reservoir fluids contained, the Pipe Rams are opened and drilling resumes.

The liquid had changed into solid before it flowed out of the pipe.

If the assembly is loosened significantly, the pipe joint should be disassembled. . .

The pipe of fume hood should upward through the roof. There should be water pipe and water sink in the fume hood.

To ensure the optimal temperature of the radon water, make sure to drain the residual cooled radon water in the pipe before use.

The pipe couplings should maintain the normal working condition under r the maximum allowable deflexion and dislocation.

The pipe fitting (1) comprises a plastic body (2) and a reinforcement ring (3) around the outside of the plastic body (2).

As major facilities of the hot rolled pipe production line located in the pipe rolling division of Tianjin Steel Tube Corp.

Improving the casting operation, preventing the by-products get into the internal of the pipe.

Listing 12 is called when there is no user activity data on the pipe.

You should also install the check valve as far from the pump as possible and at a minimum length of 5 times the pipe diameter.

After the pipe, change to a different directory and then extract the byte stream again from the standard input.

Too slow a flow May cause a build-up of sewage, and consequent blockage, and too rapid a flow May result in the erosion of the pipe.

Westmoreland grabs a piece of industrial pipe and they try to wedge it between the ceiling and the pipe.

Now lets place some secondary shapes, rings around the pipe.

Through the simple simulation of the pipe and fluid in casing pipe, the accuracy of CFD, flow calculation software PHOENICS.

The pipe material for nozzle neck shall be seamless, unless otherwise approved by Purchaser.

one end of a long metal pipe, the other end of the pipe.

Grid, dirt or any foreign matter accumulated in the pipe can hinder efficient valve operation and seriously damage vital valve parts.

and especially for short pipe cutting, the accuracy of the axial size of the pipe is favorably ensured.

The pipe with hi-strength, and pressure and shock resistance together with the advantages of metallic and plastic pipes.

The pipe system had passed the acceptance air pressure test performed by the installing contractor.

In the guards' room, Sucre hammers away at the top of the pipe from inside the hole.

During roll pipe bending, a series of spool-like rollers apply pressure to the pipe as it passes through them.

Walking slowly across the grass he pointed the pipe at the lion and fired .

As strengthening of the natural convection heat transfer to air, the temperature of the pipe becomes low.

The two parts of the pipe have separated at the joint.

That's one big pile of concrete. How do you know where the pipe is?

She put the soft plastic over the hole and ran down to get more plastic from the pipe.

In the long distance water supply pipe construction project, the most outstanding problem is how to protect the pipe.

Then say that you stuffed a potato down the pipe.

Lolisy got an angel face, but quarreled with in urbane words. She used to hit the pipe and prostitute herself.

LG PEX-A Pipe is bent simply by holding the pipe widely and bending it slowly, without need for intended hot water circulating or heating.

After removing it from the furnace, the pipe is secured by one end to a bending slab.

The mould in the size to produce the pipe that you needed is not available in our factory.

This product is spiral rid reinforcing plastics pipe. The internal surface of the pipe is smooth, bright, soft and abrasion-resistant.

Exposing the liner to steam or hot water stiffens and seals it, leaving it flush with the inside of the pipe.

Paddle conveyor screws have formed steel blades mounted on rod shanks inserted through the pipe.

He plugged the hole in the pipe with an old rag.

What'd he say? I think he said follow the pipe.

Analysis and estimate of the pipe inner wall surface using wavelet transform are described.

Care shall be taken to avoid blast cleaning away identification markings on the pipe.

The seam of the pipe seat is not welded thoroughly and needs welding and grinding.

The pressure test is over. Now decrease the pressure , dismantle the pipe and check the inside of the pipe.

The structural member has the advantages of simple structure, high stiffening strength and little possibility to explode the pipe.

It adopts precise Aluminum pipe passive forming technology to guarantee the pipe welding normal and steady .

I confess to the waysIde arbour, the pIpe of contentment, and the lotus leaves beIng altogether unsuItable metaphors.

The Pipe shown in Figure 1 shows the Pipe I built for use in my last weather badge implementation.

And also, the pipe is held by clear acrylic pole from all directions, and this makes the pipe free from gravity and float in this space.

But large question marks remain over where the gas will come from to fill the pipe, energy analysts say.

The clothes hung in the pipe color the different spots in the shop, and softly flutter in the air.

Three common patterns that I see driving exceptions are technical debt, overstuffing the pipe, and misaligned reward structures.

the sealing ring is embedded into the tube coupling to prevent the screw threads of the pipe body and the coupling from being eroded.

Therefore, it applies to a variety of stress path and the pipe connection.