strain rate

of low strain rate under strain-controlled condition, an overshoot appears at the point and an undershoot at the point .

The functional relationships among the dynamic softening time, the torsion rupture strain and temperature-strain rate co. . .

The elastic modulus of granite has no obvious change with the variation in strain rate.

In the case of low strain rate, heat generated by SIMT in the interface is radiated and therefore temperature does not increase.

Furthermore, the strain rate can be varied over a wide range in machining by varying the machining speed.

Based on these reasons, both overshoot and undershoot do not appear in the case of high strain rate.

The soil strength descends evidently and its strain rate increases as water content of cohesive soil with low swelling property increases.

The peak strain has a increasing tendency with the increase in strain rate; and the ultimate strain is not sensitive to the strain rate.

Septal strain rate values are higher than the values of lateral and posterior walls, but the differences have no significance.

It was indicated that the tensile strength of rock material increased with the increasing strain rate.

The results showed that the flow stress and deformed microstructure were greatly affected by strain rate and deformation temperature.

Within a certain range, grain size becomes small as deformation temperature declines and strain rate rises.

The results show that the flow stress decreases with the deformation temperature increasing and strain rate decreasing.

Test results show that granite dynamic mechanical behavior of compression and splitting tensile has distinguishable strain rate effect.

So the properties of plastic molding for lower strength grade lumber can be improved by reducing the strain rate.

Under high strain rate, stress-induced martensite phase transformation happened to the sample in the solution treated condition.

However, the elastic deformation behavior of nanotubes is not affected by the strain rate.

The results show that flow stress increase with the increase of strain rate, while decrease with the increase of deforming temperature.

It was indicated that the strain rate is distributed unevenly and changes with loading time.

The relationships between strain rate and Poisson 's ratio, strain rate and energy absorption capability are also analyzed.

When the temperature is constant, the dynamic recrystallization was increased as the strain rate decreased.

The deformation resistance of most of the metallic materials is influenced by the strain rate.

And the retained austenite transforms into martensite fast at the preliminary state with the increase of strain rate.

The kinematically admissible velocity field and strain rate field for extension forging of rounds have been established.

As to mechanical factors, the influence of the stress direction, stress strength, loading types, and strain rate on SCC were introduced.

The granite dynamic strengths, which increase with the strain rate, are calculated from the existing test results.

The effect of increasing strain rate on the increase of dezincification coefficient was diminished with increase in potential.

When deformation temperature is constant, flow stress increases with the increase of strain rate.

When strain rate is constant, flow stress decreases with the increase of deformation temperature.

Results: The peak systolic strain rate values and strain values in apex-mid-basis segment have not significant difference.

To determine the strain rate effect, the nylon 6 nanocomposites with 5 wt % loading of the organoclay were tested at different strain rates.

The shear strength and elongation of the lap joint increase with the increase of strain rate.

The sensitivities of the plastic flow stress to strain rate and temperature are analyzed.

And as MMT content and the stretching rate increased, the strain rate increased, and hardening phenomenon was also more obvious.

The results show that the properties of DP steel under quasi-static tension is strain rate dependent.

And these are given that the relations between the size of block destroyed and strain-rate, and between the plastic distortion and stress.

Strain rate affects the strength of rocks significantly, and therefore affects the fracture of rocks.

The phase and dislocation yield stresses grow with the increase of the strain rate.

The results show that the moduling the forming effect, the strain rate effect and suitable mesh can achieve more accurate results.

Superplastic materials are sensitive to strain rate sensitivity.

The effect of deformation temperature and initial strain rate on the super plasticity of the alloy was observed.

Hydrogen analysis and slow strain rate test in AZr gas for irradiated austenitic stainless steel.

So the composite has sensitivity of strain rate during compression in semi-solid interval.

Relationships of age, LV mass, and myocardial perfusion with timing of strain, strain rate, and dyssynchrony were studied.

Comparatively, the slow strain rate method has higher sensitivity.

The same strain rate dependency is then assumed to hold for all strain states.

Larger strain rate can lead to snap-back of instability of the system.

Beijing-Tianjing-Bohai and Xingtai regions are higher shear strain rate region.

The Q value of the composite increases with the strain rate increasing.

According to the contours of stress, strain and strain rate, the characteristic of bond process was discussed in detail.

In this paper, the relation of shear strain rate with shear stress of the urban sewage is determined based on experiments.

The input parameters were temperature, strain rate and strain.

However, higher strain rate tests were performed using a Split Hopkinson Pressure Bar (SHPB).

The strength of 6066 aluminum alloy was increased and the ductility was decreased with the increase of strain rate.

The forward modeling provides a good foundation for the inversion of 2D strain rate.

The deformation and strain rate is not equal in different part of ECAP materials, and this is beneficial to shearing deformation.

The stress corrosion cracking (SCC) behaviour of 7075 aluminum alloy was studied using slow strain rate test (SSRT) technique.

By simplified model, the effect of strain rate upon dynamic dent resistance is analyzed.

The precision of network model which is affected by the temperature and the strain rate are analyzed.

The study result shows that in small strain rate region, strength-strain rate sensitivity is controlled by thermoactivational mechanism.

The damage threshold is regularized in order to reflect strain-rate sensitivity of rock materials under impact load.

The effect of the deformation temperature on flow stress is related to strain rate.

These quantities ary with parameters such as temperature and strain rate, further complicating the analysis.

Molybdenum is strain rate sensitive material, that is, flow stress increases with increasing strain rate.

Strain-rate effect is another important factor for anomalous response and strain-rate effect can not be ignored under blast loading.

In this paper the effect of strain rate on the spallation of rocks is studied.

At the same time, through the microscope test of surface, the effect on craze density by strain rate has been investigated as wel.

Because of the strain-rate effect, the vessel material's yield stress is increased 2. 2 times.

And they are of obvious strain-rate effect, that is, strength increases with strain rate.

Echocardiographic evaluation of myocardial strain rate of the left ventricle and its influencing factors in healthy adults

Dynamic constitutive behavior of materials at high strain rate taking account of damage evolution

Study of a Superplastic Forming Titanium Alloy at Low Temperature and High Strain Rate

it is not neglect to think over the strain rate and thermal effect of solders in numerical simulation;

Quantitative evaluation left ventricular myocardial deformation by Doppler strain rate Echocardiography in healthy children

Clinic study of strain rate and dobutamine stress echocardiography in the diagnosis of coronary heart disease

Compare and analysis about hypertrophic cardiomyopathy and hypertensive left ventricular hypertrophy with strain rate imaging

Design and Implement of a Constant Strain Rate Controlled Superplastic Bulging Tester

A Phenomenological Constitutive Law for the Description of Nonlinear Post-yield Behaviour of Glassy Polymers under Different Strain Rate

General Strain Rosette Method and its Application to the Computation of Geo-Strain Rate in Chinese Sichuan-Yunnan Area

Experimental Study of Rock Tensile Strength Under Intermediate Strain Rate

Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

Constitutive Relation of Fe-base Shape Memory Alloy under Torsion-tension at a High Strain-rate and an Elevated Temperature

Different degree of myocardial ischemia in dogs assessed by quantitative tissue velocity imaging and strain rate imaging

Elastoplastic Damage Constitutive Model for Concrete Considering Strain Rate Effect Under Dynamic Loading

Quasi-static Compression of Polyurethane Syntactic Foams Considering Their Strain Rate and Temperature Effects

Study of Slow Strain Rate Testing for High Strength Pipeline Steels in High pH Environment

Study on Mechanical Properties of Strain-Rate Effect and its Failure Mode for Cast Iron under Impact Loading

Experimental study of acute myocardial ischemia in dogs by strain rate imaging

An Intelligent Ant Colony Neural Network Model for the Dynamic Constitutive Relationship of Rock under High Strain Rate

Analysis of Strain-rate Effects on Constitutive Behaviors of Two Explosives

Preliminary analysis of strain and strain rate distribution in carotid artery atherosclerotic plaque

Analysis of Strain-rate Effects on Constitutive Behaviors of Two Explosives

Research for temperature and strain-rate history effects on constitutive relation of Fe-base shape memory alloy under tension

The Constitutive Relationship between High Pressure-High Strain Rate and Low Pressure-High Strain Rate Experiment

Evaluation of Strain Rate in Different Layers of Left Ventricular Myocardium in Early Diastole Using Strain Rate Imaging

Comparison of Tissue Velocity Imaging, Strain Rate Imaging and Strain Imaging in the Diagnosis of Coronary Artery Disease

High strain rate compressive deformation behavior of Zr-based bulk amorphous alloy in supercooled liquid region

Quantitative analysis of strain and strain rate of left ventricle in healthy subjects

Numerical simulations on distribution of stress and strain rate in rod penetrator and armor during penetrating

Study on myocardial ischemia in coronary heart disease by echocardiographic curved M-mode strain rate imaging

Strain rate imaging in early assessment of thoracic radiotherapy-induced myocardial damage

Axial response of rock specimen considering strain rate gradient effect in uniaxial compression

Experimental Research on Strain Rate Effect of High Steel Fiber Reinforced Concrete Under Impact Compression

Characteristics of the Strain and Strain Rate on the Thin-Walled Square Tube Under Impact Loading

Experimental Investigation on the Dynamic Tensile Behaviour of Concrete Under High Strain Rate

Computation of the present-day strain rate field of the Qinghai-Tibetan plateau and its geodynamic implications

Strain Rate Vector Inner-Product During Strip Drawing or Extrusion in Cylindrical Coordinate System

Effects of temperature and strain rate on the fracture strength of rock and their influences on the rheological structure of the lithosphere

Influence of Strain Rate on the Mechanical Properties and Energy Absorption Capacity of Aluminum Alloy Foam

Application of strain rate-dependent damage model in analysis of dynamic opening of high arch dam transverse joints

Experimental Investigation on Dynamic Response of Energetic Materials at High Strain Rate

Strain rate imaging and its quantitative assessment

Molecular dynamics simulation of strain rate effect on stress induced crystallization for metallic glass Cu

Clinical study on postsystolic shortening of regional myocardium in coronary heart disease patients using strain rate and strain imaging

Effect of Strain Rate on Coarse Grain Superplastic Deformation and Room Temperature Fracture Behavior

Quantitative tissue velocity and strain rate imaging in the evaluation of normal canine myocardium

Nonlinear Seismic Responses Analysis of Gravity Dam Considering Strain Rate Effect

Evaluating Coronary Heart Disease Using Ultrasound-based Strain Rate Imaging

Some Misunderstandings on Rotation of Crystals and Reasonable Plastic Strain Rate

Solution to Rectangular Slab Forging with Bulge between Two Parallel Platens Using Strain Rate Vector Analysis

A Study on High Strain Rate Tensile Experimental Technique Aimed at Fiber Reinforced Composite

Influence of Stress Triaxiality and Strain Rate on the Mechanics Behavior of 6063 Aluminum Alloy and Material Characterization

Application of Integral Mean Value Theorem to Inner-Product of Strain Rate Vector During Disk Forging

Quantitative analysis of strain and strain rate in normal subjects by velocity vector imaging

Sea ice strength sensitivity to strain rate and its evolution mode

Uniaxial compressive strength of saturated frozen clay at constant strain rate;

Study on Temperature and Strain Rate Effects on Mechanical Behavior of Aeronautical PMMA

Influence of strain rate on mechanical behavior of TiNi shape memory alloy under compression

Numerical simulation of strain rate on dynamic recrystallization of metal

Dynamical model of rocks with consideration of strength-strain rate dependence

Twinning Induced Plasticity at High Strain Rate for Austenitic Manganese Steel

Effects of shear strain rate on mechanical behavior of Zhanjiang strong structured clay

The application of strain and strain rate in detection of early diabetic myocardiopathy

Strain rate measurement of normal left ventricular posterior wall in short-axis section

A New Test Method to Achieve the Dynamical Rock Failure with Medium Strain Rate by Low-cycle-index Fatigue Loading

Test Method of Transformation Kinetics and Morphology Observation at High Strain Rate

Two-dimensional strain in evaluation of global left ventricular strain and strain rate

Plastic Deformation Mechanism of High Pure Tungsten Prepared by CVD Method at High Strain Rate

Study on influencing factors of strain imaging and strain rate imaging in long-axis direction

Effect of Strain Rate on Deformation Induced Ferrite Transformation in Plain Low Carbon Steel

Effects of Relative Density and Strain Rate on Compressive Behavior of Aluminum Foams

On the Consistency of Large Earthquake Moment and Strain Rate Inferred from GPS Data in North China

Research on The Compliance of Common Carotid Artery Using Strain-strain Rate Imaging

Strain Rate-dependent Fractograph of Carbon Fiber under High Strain Rate Tensile

Diagnosis of myocardial ischemia by tissue Doppler curved M-mode strain rate imaging

Effect of Strain Rate on Tensile Properties of A High Carbon Si-Mn TRIP Steel

Energy absorption behaviour of aluminium foam under medium strain rate

Study on Strain Rate of Asphalt by Digital Specklegram Processing Technology

Compression strength of human mandible under different strain rate

High-strain-rate superplasticity of metal matrix composites

The Status and Trend of Research on High Strain Rate Superplasticity of Al-Based Materials

Effect of Temperature and Strain Rate Upon Fracture Toughness at High Temperature

Producing Nano-structured Copper Specimens under the High Strain Rate Load and Severe Plastic Deformation

Application of strain rate imaging in the diagnosis of myocardial ischemia

Effect of strain rate on room-temperature tensile properties of TiAl-based alloys with fully lamellar microstructures

The Influence of Strain Rate and Solution Treatment on Dynamic Recrystallization for 7075 Aluminum Alloy

Change of uniaxial compressive strength with strain rate for granite

Control System for Constant-Strain Rate Tensile Testing Machine

Strain Rate Effect and Hot Rolling Model Prediction Improvement

Clinical Research and Current situation of Strain rate imaging

Research on Strain and Strain Rate in Left Ventricular Walls in Healthy Human Being

Influence of strain rate on the size of dislocation cells in iron

Development of Material Testing Apparatus for Intermediate Strain Rate Test

Development of Mechanism of High Strain Rate Superplastic Deformation

Effects of Temperature and Strain Rate on Tensile Behavior of Nickel Foam

Effect of Strain Rate and Potential on the Propagation of Stress Corrosion Crack

Effect of Strain-Rate Sensitivity on the Behavior of Ship Structure in Collision

Tensile Properties of Coal-Roadways Bolting Steel at Low Strain Rate

The Theoretical research of dynamic fracture under the condition of high-strain rate loading

Investigation on the High Strain Rate Properties of PVA Fiber Bundles

Investigation of the effect of strain rate history on the stress-strain curves

Clinical Applications of Strain Rate Imaging

Influence of strain rate effect on dynamic bending strength of concrete

Effect of strain rate on the compression behavior of vinyl ester resin casting

Application of strain and strain rate in ischemic heart disease

Strain rate imaging and strain imaging in healthy middle and old people

Tensile Properties of High Strength Rock Bolt Steels at Low Strain Rate

Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing

Study on the strain rate of clay under cyclic loading

Study on failure mechanism of materials under high strain rate

The effect of strain rate to the deforming ability of nodular iron and low chromium white cast iron

Seismic overload response analysis of concrete gravity dam based on strain rate-dependent damage model

Strain-rate effects of expanding fracture of 45 steel cylinder shells driven by detonation

Effects of strain rate on dynamic behavior of concrete in tension

Effect of Strain Rate on Compressive True Stress-strain Curves of Steels

Effect of strain rate on dynamic behavior of concrete in compression

Influence of Strain Rate on Tensile Test Results of Cotton Yarns

Tensile properties of high carbon Si-Mn TRIP steel at low strain rate

Research of the Strain-Rate Effect of Pb-free Sn-Ag Base Solders

Recent Development of Study on High Strain Rate Superplasticity

Seismic response analysis of concrete gravity dam based on strain rate-dependant damage model

High Strain Rate Tensile Fracture of Carbon Fiber

Strain rate effect on the properties foam materials

Real-time triplane strain rate imaging;

The Effect of Strain Rate on Mechanical Properties of Steel in Hydrogen

High Strain Rate Dynamic Split Tests of Marble

Effect of Low Strain-Rate on Strength of Bolting Steels

Research on the Spalling of 45# Steel Under Different Strain Rate

Stress uniformity and constant strain rate in SHPB test

Change of Poisson's ratio with strain rate

Change of Young's moduli with strain rate

Scale Effect of Plastic Strain Rate

M-mode of strain-rate;