solid

Pour the mixture through a fine-mesh sieve to remove all of the solids, then pour the toner into a clean bottle with a tight-fitting lid.

Early man did not know how to explain the difference between gases, solids and liquids.

In the case of solids and liquids which have very small coefficients of thermal expansion, this distinction has no practical importance.

A homogeneous mixture of two or more substances, which may be solids, liquids, gases, or a combination of these.

The best heat-insulating solids own their insulating properties to the air or to other gases contained in cells within the material.

Much of the chocolate consumed today is in the form of sweet chocolate, combining cocoa solids, cocoa butter or other fat, and sugar.

Semiconductor: Class of crystalline solids with electrical conductivity between that of a conductor and an insulator.

as with most organic solids , fire is possible at elevated temperatures or by contact with an ignition source.

The solids continue around and down until they exit the bottom of the hydrocyclone (along with small amounts of liquid) and are discarded.

Although solids expand much less than liquid or gases, the small increase can add up to a lot, when there are long lengths of rail.

Then he "rinsed the solids off under cold water" and "picked up the stainless steel block and I rubbed it on my hands. "

The Diaphragm trash pumps are used for clear water as well as water containing debris or solids up to 1. 75 inches in diameter.

Solid Liquid Separation includes important industrial processes used for recovery and processing of solids or purification of liquids.

This factor accounts for the gas adsorbed on the solids, its interchange between the wake and the emulsion, and its holdback in the system.

The five sacred solids, as you can see there. Which is not to be confused with the five sacred salads.

of this technique is the need to use solutions, which Can be time-consuming and tedious when solids have to be analyzed.

Deposition of solids in quiescent stretches of a water course will impair the normal aquatic life of the water course.

This system uses the surface forces of solids to adhere certain substances in fluids onto recovery solvents.

The principal component model and the regression model between the total dissolved solids and ions content were established in this paper.

The word "fluid" , as used here, means that fluidized solids exhibit many of the properties of a liquid.

This class includes solids, liquids, and gases capable of catching fire in the presence of a spark or open flame under normal conditions.

A detailed precept about processing and assembling for the mold of solids of revolution or plates of the kind is given.

If the temperature drops near the condensation rate slow enough, the solids will form the lowest energy state of the ground state.

Wastewater from the entire building flows into a holding tank where solids settle, like in a septic tank.

RO systems remove a large percentage of the total dissolved solids, as well as bacteria and endotoxin, from the feed water.

Atomic bonding in solids may be considered in terms of attractive and repulsive forces and energies.

Solids vary greatly in resistance, some being very good conductors, while others are so resistant that they are referred to as insulators.

Such paddles are prone to damage if liquid velocity is high, or if the liquid contains solids of any appreciable size.

The resin solids content was high, after 2 or 3 times to obtain the surface brightness can be painted cream and fullness of film.

It may be a brine containing only selected solids of appropriate particle size ranges (salt crystals or calcium carbonate) and polymers.

The propagation of stress waves in solids can be considered as a part of the field of acoustics or ultrasonics depending on the conditions.

The correlation is considered to be an accurate method for the calculation of pressure drop in the pneumatic transport of solids.

ECT was also used to investigate the volumetric concentration distribution of solids in the cyclone concentrator.

The white juice is stored in a tank and the small grape solids are allowed to settle to the tank bottom.

Can spins in solids maintain quantum information long enough to perform a useful number of operations on that information?

The procedure determines the weight of solids removed (from a given sample volume) by a filter of a specific mesh size.

Most solids, if pulled or twisted, will give a little in a process known as elastic deformation.

when draining water, vessel to ensure that the water is clear of floating solids, visible foam, visible sheen and any other pollutant.

milk with an initial solids content of 10% can be concentrated to 20% upon removal of half the water in the FORm of ice.

Removal of materials by dissolving them away from solids is called leaching .

Results After clarification by chitin, the relative density and the total solids content declined slightly, but the difference was small.

All bags decreased the content of soluble solids and reducing sugar, the effect of double-layer bags was more obvious.

As the mud flows around and gradually down the inside of the cone shape, solids are separated from the liquid by centrifugal forces.

The inventory of solids in a fluidized bed can easily be found by pressure drop measurements across the bed .

Since the electrical properties of solids depend on their crystal structures, his group is experimenting with new atomic lattices.

During the removal process, water loss rates were all within 5% and solids removal rates were all higher than 80%.

The solids phase can be a mixture of fibers and a particulate material.

This was discovered by the Greek philosopher Plato about 2, 400 years ago. So these solids are collectively known as the Platonic Solids .

The addition of some solids can lower the freezing point of a liquid, a principle used when salt is applied to melt ice on frozen surfaces.

The reduced diameter tube section on each tube slopes away from the solids falling down the wall.

Settleable solids are the particulates that settle out of a still fluid.

Which had no visible solids, right?

A detailed treatment of this topic can be found in numerous books dealing with the wave mechanics of solids.

Steel silos for the storage of bulk solids generally consist of a cylindrical vessel above a conical discharge hopper.

Any of various viscous substances that are exuded by certain plants and trees and dry into water-soluble, noncrystalline, brittle solids.

Water or other liquids may be removed from solids mechanically by filtration or centrifugation or thermally by vaporization.

This eliminates the solids material from building up and eroding the furnace tubes where the lower furnace refractory ends.

Very sticky aliphatic PU resin use for adhesion promoter but it does not contain solvent and is totally light fast. 10% solids.

Ideally suited for removing large amounts of solids (up to 25 percent) from water and other low viscosity liquids.

Oily DAF scum, a kind of oily waste solids, was an end-waste produced from air-flotation process of the oily wastewater treatment.

Since solids do not move, heat convection does not occur in solids.

The major part of this waste water, consisted of wastes of relatively high BOD, alkalinity, suspended solids, and coloration .

an electrically neutral ionized gas in an electric discharge ; distinctly different from solids and liquids and normal gases.

For decades, scientists have debated whether or not gasses could display the same magnetic properties as solids.

AA mud and solids-control system in which the only discarded waste is moist, drilled-up rock materials.

This non-sterile, high-performance polypropylene bottle is ideal for a wide range of liquids and solids.

And then we will be able to do solids in space, but one thing at a time.

The experiment adopts two solids that are Silica Gel Resin and Quartz Sand and is measured in ten different experimental conditions.

Mechanical processes, including solids transportation, crushing and pulverization, screening and sieving.

any one of five solids whose faces are congruent regular polygons and whose polyhedral angles are all congruent.

Low solids flux for surface mount assemblies designed to help reduce skips on bottom side surface mount pads.

Repelling vanes shall be provided on the top shroud to expel solids and reduce axial thrust and pressure at the seal area.

Solids passing capability of the impeller offered shall be clearly indicated on the manufacturer's performance curve.

It is used to put out the initial tire of soils, flammable liquids, organic solids, gases, and electrical equipment.

The result of the quality analysis indicated that the content of soluble sugar, vitamin C and soluble solids were increased to some extent.

The backwash is the principle sequence used to remove the build up of solids and reduce the transmembrane pressure.

Nonmetals are generally gases or soft solids that do not conduct electricity.

Dilatometer: an instrument used to measure thermal expansion and dilation in solids and liquids.

Polychlorinated organic contaminants in waters, suspended solids and sediments of the Nanjing section, Yangtze River.

Fluid flow processes, including fluids transportation, filtration, solids fluidization.

It absorbs water and removes solids reliably and efficiently from a wide range of petroleum products.

The degree of mixing and the rate of approach to uniformity will depend on the frequency of turnover of solids.

Underground erosion is the removal of solids, from the soil by the flow of underground water.

With point you could make a line; with lines, planes; with planes, solids.

We suggest that these solids control equipment parts be made of synthetic materials.

Liquid paints characterisation - solids volume , density , solids weight, pigment content, binder or solvent content .

Appearance of samples, color and temperature (cool or hot). Is sample single phase? Are there any solids?

The treatment of Rayleigh waves in general incompressible materials usually entails no greater simplicity compared to compressible solids .

It is to be expected that solids will show an increase in solubility when pressure is applied.

The fluid, which may be either gas or liquid, passes through the bed of solids and through the retaining membrane.

The authors set the stage for the modern era by detailing the formulation of the quantum field theory of solids.

Interlay: Cut-ort paper placed between a letterpress plate and its mount which increases pressure on the solids or dark tones.

The vacuum processing machine is suitable for liquids and semi-solids in a wide range of viscosities.

Under normal conditions the contacting of solids by the bubble gas contributed significantly to the overall conversion of gas.

At higher gas velocities the rising bubbles cause the observed churning, mixing, and flow of solids.

The coating can be a two-component or two-part system, and can have a high solids level.

Most chocolate we eat today is a combination of cocoa solids, fats, sugar, and, in the case of milk chocolate, milk.

Unsweetened baking chocolate (bitter chocolate) contains primarily cocoa solids and cocoa butter in varying proportions.

If the mud is benign, the solids (mostly clay), and liquids (water), may be plowed and tilled back into the local soil.

An instrument used to measure thermal expansion and dilation in solids and liquids .

The application modes for solids support static, transient, eigenfrequency, and frequency response analysis.

Unopened dried egg products and egg white solids can be stored at room temperature as long as they are kept cool and dry.

From the fluid obtained, apacked cell volume, total solids, cytology, and a blood urea nitrogen sample are submitted.

Waste chemical reagents are hazardous solids requiring to be treated safely.

Factors of the internal pressure, liquid compressibility and thermal expansion of solids are considered.

An easy solution, Iserloh said, is to try skim milk plus, which has added milk solids for a creamier taste.

Laser induced breakdown spectroscopy ( LIBS ) is a potential technique for rapid analysis of samples present in solids, gases and liquids.

Its alcohol content can be further modified by changing the ratio of fermentable to non fermentable solids in the mash.

Spintronics, a new research field developed in recent years, studies electron spin coherent states in solids, especially in semiconductors.

Often caused by excessive solids content, especially colloidal solids, or, in the case of oil or synthetic muds, by low temperature.

Aggressive or crystallizing media or media containing solids cannot penetrate into the measuring system .

Be able to transfer high-solids content of the media.

High solids applications polyester paint, no solvents ethylene paint has industrialized production.

Even though the solids are now playing a larger role, the breast milk or formula still provides the core of the nutritional needs.

Top mounted, direct level measurement for liquids or solids, including those with wide temperature and pressure requirements.

CHEMICAL PRODUCT FOR INDUSTRIAL USE. DETERMINATION OF RELATIVE TEMPERATURE OF SPONTANEOUS FLAMMABLE OF SOLIDS.

AGRICULTURAL PRODUCTS. FRUIT AND VEGETABLE PRODUCTS. DETERMINATION OF SOLUBLE SOLIDS CONTENT. (REFRACTOMETRIC METHOD).

Substances not arranged in a repeating, orderly pattern are classified as amorphous solids.

which describes the mass contribution of the different size classes to the solids recovered in the concentrate.

We investigate by experiment the influence of suspended solids upon the transition to turbulence in pipe flow.

The numerical simulation on gas-phase and solid-phase flow field in vent duct is to analyze the movement locus of solids in vent duct.

Shell Omala Oils protect both steel and bronze components, even in the presence of contamination by water and solids.

A thermal process utilizing the fluidized-solids technique for continuous conversion of heavy, low-grade oils into lighter products.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES FORMED AFTER HYDROLYSIS OF SOLIDS AND LIQUIDS.

The content of the soluble solids in fruit juice is one of the most important quality index of seabuckthorn fruit juice.

chlorides and total dissolved solids are the indicators modeled most frequently.

Solids can release gases back into the atmosphere when heated and pressed by volcanic activity.

Sources mostly suited to the direct analysis of solids. The ARC and, to a larger extent, the spark are mostly used.

is an ideal circumstance for initiating the spins and orbital motions of electrons and nuclei in solids.

milk . concentrated lactoserum . determination of solids content.

The test results indicated that both of the crafts had good removal efficiencies of suspended solids and turbidity.

Solids. Examine solids dispersed in a suitable liquid (mull) or in a solid (halide disc), as appropriate.

As the temperature falls, the atoms fall together, clump in lumps, and reduce to liquids, solids and molecules.

Provided is a cryogenic process system wherein a solids removal filter (210) is positioned in a conduit upstream of process equipment.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF SPONTANEOUS INFLAMMATION OF SOLIDS AND LIQUIDS.

Diffusion in solids is of importance in metallurgical operations.

The section is a complex ordering of three-dimensional space, a play of light and shadow solids and voids.

Filter media for the separation of solids from gases and fluids, filter media for hot, cold, wet and dry operations are available.

The moving rule of the solids inside the machine all has great influences on its capacity and effect.

Foams, which can act like solids, are part gas and part liquid. What does it mean for such a substance to change phases?

Maximum slip velocity between the solids and the gas is desirable for good heat transfer and intimate contact.

describe solids, liquids, and gases in terms of shape and volume.

Combined the operating conditions, this thesis presents the design method for solids recycle devices in dense transport bed.

A classification of filter used in the cleaning and treatment of brines and solids-free fluids.

Adhesives. Determination of conventional solids content and constant mass solids content.

A new measurement technique for thermal conductivity of solids at high temperature by the hot wire method is developed.

AUS-DET XTRA is a concentrated blend of detergents which improves the drilling characteristics of low solids and water-based muds.

The reaction can be repeated on the isolated solids to increase the purity of ferric oxide in the solids.

The topology of tori is finally constructed with respect to other surfaces. The reconstruction of solids with tori is implemented.

This Tracer PockeTester offers direct reading of Conductivity, Total Dissolved Solids, and Salinity with one electrode.

The Korean roasted green tea had less contents of moisture and caffeine, but higher content of amino acids and water-extractable solids.

The edible rate and soluble solids content have decreased of each processing.

These energetic intermittent slugs of gas cause the initial dislodgement of solids and the subsequent breakup of agglomerates.

Even with the clarifiers operating at optimum levels under anticipated conditions, the additional solids-removal equipment is required.

It will also carry lights and a high-definition video camera, and filters to draw solids from the water.

This system operates in conjunction with pretreatment and sludge solids disposal or storage facilities.

Filter 500 ml water sample by a dry filter paper; then dry the filter paper and weigh it. Calculate the amount of total suspended solids.

Water quality. Determination of suspended solids. Method by centrifugation.

All the other uranium fluorides are in volatile solids which are coordination polymers.

Green's functions or fundamental solutions play an important role in both applied and theoretical studies on the physics of solids.

Density, water content, volume solids, and exempt solvent content are also determined, and the VOC content is calculated.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF OXIDIZING PROPERTIES OF SOLIDS.

on the contrary , beds of large uniformly sized solids often fluidize poorly with bumping , spouting and slugging.

Polymer melts are typical viscoelastic materials which are neither similar to elastic solids nor to viscous fluids.

Erosion is a major cause of maintenance problems in CFB boilers due to the high solids loading in the flue gas.

The same solids-feeding principles that occur in the barrel immediately past the feed throat apply to the feed throat itself.

Quasicrystals (QCs) are both a novel structure of solids and a kind of new materials discovered in recent more than twenty years.

Third, regression data of ion strength, conductivity and total dissolved solids (TDS) seems the same as reference.

An alternative measure is turbidity, which indicates the amount of solids in water that scatters light.

And researchers found that P waves travel through both (liquids) and solids, while S waves travel only through solid matter.

As cracking continues in the drum, gas oil and lighter components are generated in vapor phase and separate from the liquid and solids.

Treating the thin stillage of centrifugalization with flocculation, the removing rates of suspended solids could be 86.

However, it must be understood that cyclic hemiacetals of those open-chain forms prevail I solids and at equilibrium in solutions.

It also questions the evidence that introducing solids at four months prevents coeliac disease and allergies.

We shall concern ourselves with the basic principles common to fluids and solids.

All bodies of matter conduct heat to some degree. But many solids conduct heat better than do liquids , and liquids better than gases.

Solids. Liquids and gases can be changed from one state to another. These changes are called changes of states.

MILK, CREAM AND EVAPORATED MILK. DETERMINATION OF TOTAL SOLIDS CONTENT (REFERENCE METHOD).

Water velocity of the feed must be sufficient to keep the solids moving.

The mixing of solids has been reported and described in a variety of seemingly unrelated ways.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF HYDROSOLUBILITY OF SOLIDS AND LIQUIDS AT LOW SOLUBILITY. COLUMN ELUTION METHOD.

They are particularly useful for pumping muddy water, sludge or any liquid with a high percentage of solids.

Thermodynamically , the high oxygen content of Earth's atmosphere should fall quickly as the gas oxidizes surface solids.

Rags and stringy material along with solids in liquid suspension are easily handled by this non-clog impeller.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF SOLIDS.

And just wait until your baby starts eating solids -- your dinner table conversation will never be the same again.

A paper characteristic requiring consideration when printing solids and half-tones.

The solids would clog sewers, cause interference in subsequent treatment processes.

Butter - Determination of moisture, non-fat solids and fat contents - Part 1 : determination of moisture content (reference method).

The lithofacies method needs certain experience to judge the non-crystalline solids contents.

The smaller cones allow the desilter to efficiently remove smaller diameter drill solids than a desander does.

Frictional heating generated by low-frequency ultrasound makes cracks in solids visible to IR cameras.

CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF HYDROSOLUBILITY OF SOLIDS AND LIQUIDS AT HEIGH SOLUBILITY. FLASK METHOD.

To prevent clogging of the pressure tap by fine solids gas is bled into the bed at low velocity at the taps.

Flat shape. Pale yellow or pale green bottom color of skin. Wine tinges. Pale green sarcocarp . Sweat. 13% concentration of soluble solids.

Butter - Determination of moisture, non-fat solids and fat contents - Part 2 : determination of non-fat solids contents (reference method).

milk . liquid lactoserum . determination of solids content.

The wort is then cooled, the solids allowed to precipitate, and it is ready for fermentation.

Their flexible design allows solids to pass through unhindered and can even seal around solids trapped in the valve.

Electrotechnical vocabulary. Chapter 212 : insulating solids, liquids and gases.

In solids, the particles are held so firmly that their motion is restricted to vibration about fixed positions.

Several times a day manure is flushed into this processing pit. The solids are then separated.

The purpose of the free board is to allow the solids to separate from the gas stream.

This paper proposes a feature recognition and evaluation method for volumetric solids.

When a baby is still hungry after 32 ounces or nursing 8-10 times, it may be time to start solids foods.

Ball Check Valves are well suited for general applications of fluids free from debris and entrained solids.

Flotation is a process for separating low density solids or liquid particles from a liquid phase.

They demanded that we send them further information a fight the solids control equipment.

The handling of liquids is much simpler, much cheaper, and much less troublesome than handling solids.

When handling solids in suspension, Wedgeplug valves should be installed with the stem vertical.

Ice cream containing walnut was produced using conventional procedure modified by addition of 10% walnut milk solids.

Some land-locked waters such as the Dead Sea and the Great Salt Lake contain waters that are nearly saturated with dissolved solids.

And research found that P waves travel through both liquids and solids, while S waves only travel solid matter.

In solids = longitudinal waves and transverse shear waves torsional waves.

All solids and uncracked residual liquid produced from the vapor and liquid feed are intended to remain in the drum.

All solids control equipment should be run efficiently in drilling.

As with the desander, its purpose is to remove unwanted solids from the mud system.

They begin life by drinking milk and then move on to solids, like hay, pellets, and vegetables.

Solids have definite shapes( e. g. crystals). The particles are held in position. They just vibrate.

It's discovery breaks with people's traditional concept that the solids are classified into crystals and uncrystals.

Settleable solids can be quantified for a suspension using an Imhoff tank or cone.

In solids the types of waves propagating strongly depend on the boundary condition.

Mining water quality is characterized by high salinity, high dissolved solid contents and more suspended solids and high oxygen demand.

Two blade open type impeller capable of passing 3 " spherical solids. "

Chemical products for industrial use. Determination of density of solids in powder and liquids. Pycnometric method.

The band theory of solids is used to calculate the absorption and gain of semiconductor media.

High performance, selective liquid flocculent that is extremely effective in removing fine-grained solids suspended within a viscous slurry.

In geothermics we have mostly to deal with boundaries between solids and air.

For the secondary sedimentation tank, an uniform outlet is needed to prevent losses of suspended solids.

They demanded that we send them further information about the solids control equipment.

It is supplied at 55 percent silicone solids and may be further diluted with aromatic, aliphatic or chlorinated solvents.

The present paper lists and explores 15 current research issues in the frontier of the failure theory of solids.

Product solids are discharged continuously.

Two mechanisms combine to separate the water from the solids: seepage and evaporation.

They also have an intense flavor and a higher percentage of solids.

Flexible control systems to reduce liquid loss during solids blowdown .

Hazardous wastes can be liquids, solids, contained gases, or sludges.

NBE vertical ribbon dry bulk material blenders are designed to quickly and thoroughly blend powders and other dry solids.

The rapid mixing of solids in the bed leads to nonuniform residence times of solids in the reactor.

By using cyclone separators to return the entrained solids , even higher gas velocities can be used .

To solve this problem, work on the use of oil at the wellhead tree wells installed fishing ground solids control means.

Solids, liquids, and gases differ in the distances and angles between molecules or atoms and.

The localization of phonons and densities of states in amorphous solids are studied.

The content of milk solids was higher, the stability of acid milk drink was worse (H value was smaller).

First level of processing mainly uses the physical methods, which removes the suspended solids and the inorganic substance in the water.

Refer to information on bevel gear actuators for use on dry solids, paper stock, slurries or when pressure exceeds limits shown.

(Laughter) Blue cheese, ranch, oil and vinegar, thousand islands and house.

In addition, the design thought and principle of sand-grain catcher (a device for separating solids effectively) are introduced also.

NO CAVITY There is no cavity ( similar to Gate Valves ) to allow build- up of solids .

Solids expand much less than liquid or gases.