solid-liquid

And if I now, I go up to the solid-liquid coexistence, and go up like this, I can make a prediction about solid-liquid coexistence.

Solid Liquid Separation includes important industrial processes used for recovery and processing of solids or purification of liquids.

tentatively set up with such technology was an automatic facility for sink-float measurement in a solid-liquid fluidized bed.

Mainly used for sludge dewatering, solid-liquid separation and coal washing, etc.

Any of the forms or states, solid, liquid, gas, or plasma, in which matter can exist, depending on temperature and pressure.

Sound: Mechanical disturbance that propagates as a longitudinal wave through a solid, liquid, or gas.

So despite being the older group of unit operations, solid-liquid separation processes continue to be developed and perfected.

Crystallization, as a solid-liquid separation process, is widely used in the chemical industry.

The flow of oil and sand mixture in horizontal wellbore is a special flow model of solid-liquid two phase flow in pipe flow actually.

Petroleum is the general term for solid, liquid or gaseous hydrocarbons.

Chemical energy, stored in the ground in the form of solid, liquid or gaseous fuels, is the energy of greatest importance to the world.

Methods The interaction energy between the resin and the acid was calculated by conductance method and interaction equation of solid-liquid.

MEMS; hot embossing; isothermal solidification; solid-liquid interdiffusion ; metallic micro-devices.

the main factors which affect the decolouring ratio were acid con centration , solid - liquid ratio , temperature and activation time.

CHOICE OF AN INDIVIDUAL HEATING UNIT (SOLID, LIQUID AND GASEOUS FUELS) ACCORDING TO THE VOLUME TO BE HEATED.

To obtain a finely dispersed system, the solid-liquid interface has to be modified during the grinding step.

The ideal solution model and two empirical equations were applied to correlate the solid-liquid equilibrium data.

Solid, liquid and the low temperature of the line Ju crystallization, casting more narrow interval degrees performance is better.

Considering the difference of three zones, a solid-liquid coupling algorithm is presented to calculate the distribution of effective stress.

Themochemical solid -liquid conversion comprises high pressure liquefaction and rapid liquefaction under atmospheric pressure.

The saturated rock is taken as a solid-liquid two-phase medium. Perturbation method is used to analyze the stability conditions.

the solid-liquid separation of the reaction product is conducted, and the dried solid is the double-modified starch fluid loss additive.

Silica or alumina based ceramic diffusers generate microbubbles for solid-liquid separation of pollutants in wastewater.

It was found that the aggregation method is suitable to treat solid fuel SQ in solid-liquid hybrid rocket.

The accumulated data of solid-liquid culture furthered the research process of Hirsutella sinensis cultivation Biotechnology.

Over the years, FLOTTWEG has gained considerable expertise in many solid-liquid separation applications.

Centrifuges , Filter Cloth, Filter Industrial, Centrigues, Filters, Dryers, Systems and Automation for Solid-Liquid Separation.

Sand and oil water solid liquid (SL) two phase flow plays a more important role in surface transport pipeline.

For the extraction of star anise, the solvent affected it most, then the solid-liquid ratio and time subsequently.

Also the differences between solid-liquid reaction milling and mechanical alloying were presented in this thesis.

Then there was a solid liquid coexistence line.

Belt dehydration press is concentrated in recent years developed a new solid-liquid separation technology economy.

Meanwhile, the paper places emphasis on solid-liquid mixed casting process and the mechanisms for non-dendritic structures.

The usual solid-liquid separation methods and bio-chemical treatment methods were compared and discussed.

The solid-liquid interface curvature in the same solidified height decreased with lowering the pulling rate.

precipitation, solid-liquid separation, drying and pulverizing so as to produce various solid sodium metasilicate and sodium polysilicate.

Phase is a physical property of matter and matter can exist in four phases : solid , liquid , gas and plasma .

The Liquid-Liquid equilibrium area and Solid-Liquid equilibrium area were determined.

The crystallization and purification comprises crystallization, solid-liquid separation, dissolution, pressure filtration and so on.

With the solid-liquid interface moving upwards, the effect of natural convection is enhanced and the flow patterns change continually.

According to different process, the liquor is divided into solid liquor, solid-liquid combination liquor and liquid liquor three categories.

The chemical composition of water remains constant whether it is in solid, liquid or gaseous state.

The impact of the casting speed on solid-liquid interface shape and position is the largest one in the three casting parameters.

obtained in heterogeneous media at a solid liquid interface.

stirring for 1 hr, solid-liquid separating, eliminating liquid, stoving solid, crushing, sieving and packing.

It's a kind of solid-liquid separation equipment with high-efficiency, energy-saving, enclosed operation and precision clarification.

If the crystal growing furnace is used, a smooth solid-liquid interface can be obtained to ensure that crystal can grow stably.

Nanoparticles ZnS were prepared with ZnO and Na2S by solid-liquid chemical reaction under ultrasonic condition.

Water has the same chemical composition , be it in solid , liquid or gaseous state.

Solid-liquid coupling virtual prototype of axial piston pump was put up based on the interface of the two models.

Something that has mass and exists as a solid, liquid, or gas.

The explants cultured in vitro selection methods should be solid - liquid solid three alternate use of the medium. 2.

In everyday life, we recognize three states of matter: solid, liquid and gas.

Any substance is made of atom . Whether it is solid , liquid or gas .

Clearly, it is "green energy" , and exists in forms of three states of matter: solid, liquid and gas.

BOILERS OPERATING WITH SOLID, LIQUID OR GASEOUS FUELS.

an ideal solid-liquid separation equipment.

In the process of gas injection, CO2 may appears solid, liquid, gaseous and supercritical state, the phase behavior are complex.

The crack in welding center usually occurs in the solid-liquid stage.

The scattered solid, liquid, or gas in a dispersion that is surrounded by the continuous phase.

Matter exists in three states: solid, liquid, gas.

Matter exists in three states: solid, liquid and gas.

Solid , liquid and gas are the three states of matter .

Do you know that there are three for most objects: solid, liquid and gas?

M-exists in three states: solid, liquid and gas.

If you have never noticed before, observe that everything around us is either solid, liquid or gas.

Sound has to travel through solid liquid or air to reach our ears.

There are three states of matter: solid, liquid and gas.

The chemical composition of water is H2O whether it is solid, liquid, or water vapor.

We usually say is three state, that is, solid, liquid and gas.

Introduced was the application status of the solid-liquid fluidized bed technology in determining density consist of a coal;

Neural network simulation of solid-liquid equilibrium for the system sodium sulfate-Hydrogen peroxide-water

Experimental Study on Explosive Dispersion of Solid -Liquid Fuels For FAE Devices with a Special Charge Structure

An Experimental Study of the Electrochemical Effect on the Solid-Liquid Interface of Sulphide

Effects of Buoyant Particle Characteristics on Solid-Liquid Suspension and Gas-Liquid Dispersion in a Three Phase Stirred Tank

Study on Improving Technological Properties of Solid Fuel SQ Formulation Used in Solid-Liquid Hybrid Rocket

Study on Characteristics of Fluidization State of Copper Particles in Solid-Liquid Fluidized Bed

Design and Application of Instrument of Electrical Resistivity Testing for Solid-Liquid Metal during Temperature Continuous Change

Analysis of Effect Mechanism for the Rheological Property of Solid-Liquid State Alloy on the Defects Forming During Fluidic Casting

Thermal Analysis for a High-temperature Solid-Liquid Phase Change Thermal Energy Storage Container

Numerical simulation of solid-liquid separation for a hydrocyclone

Characteristics of Solid-liquid Interface Patterns and Morphological Transitions

Investigation into Measurement Thermal Conductivity of Phase Change Materials at Solid-liquid Phase Transition

Experiment and Design of a New High Efficient Solid-liquid Separation Equipment

Solid Liquid Separation Technology for Gentamicin Fermentation Wastewater

Application of Solid-liquid Separation Technology in Decolourization Process of Hydroquinone Production

Calculation of solid-liquid adsorption equilibrium with Wilson equation and homogeneous solution theory

Preliminary Study on the Structural Characteristics of Coated Urea Membranes Formed Through Solid-Liquid Reaction

Controlling Solid-Liquid Interface Configuration During Crystal Growth of CdZnTe by Vertical Bridgman Method

Aerobic Fermentation Technology for Producing Solid-liquid Mixing Fertilizer from Livestock Waste

Thermal Elastohydrodynamic Lubrication with Two Phase Solid -Liquid Lubricants

Solid-liquid two-phase turbulent flow calculation and measurement through centrifugal slurry pump impellers

One-dimensional consolidation model for landfills considering solid-liquid-gas interaction

The feature tendency and obstacles of the liquor produced with technology of solid-liquid combination

Characteristics of Fluid Flow and Particle Suspension in a Solid-Liquid Draft-tube Stirred Tank

Separation and Concentration Methodologies by Solid-Liquid Dual Phase Interaction on Micro-Fluidic Chip System

Treatment of Oil -containing Silt from Oilfield Gathering Station by Solid- liquid Cyclonic Separation Process

filtering and drying processes: firstly carrying out solid-liquid separation on nano composite particles;

Study on mixtures of higher alcohols used as the solid-liquid phase-change materials for thermal storage

Mathematical Modeling of Solid-liquid Phase Change Problems and Numerical Methods for Solving These Problems

Asymmetric Reduction of Prochiral Ketones under Condition of Solid-Liquid Phase-transfer Catalysis

for blanket cleaning solvent through the filter and solid-liquid separation methods;

Kinetic Study of Solid-liquid Phase Change in Fatty Acids

Utilization Computer Software Dealing with and Calculating the Contact Angle of Solid-liquid Gas Interface

Experimental and Theoretic Study on Velocity Profiles of Single Particle Flows for Solid-Liquid Food in Vertical Pipes

Solid-Liquid Separation During Preparation of Silver Nanoparticles by Reduction in Solution

Numerical Analysis for Position and Shape of Solid-Liquid Interface during Continuous Casting of Single Crystal Cu

Pilot-scale Experimental Study on a New Solid-liquid Separation Technology of Suspended Media Filter Bed

Study on the Configuration of Anion Clusters in Solid-Liquid Interface of KDP Crystals with Density Functional Theory

Overview of Flashover Properties over Solid-Liquid Interfaces under Nanosecond Pulses

Computations of Downhole Flow and Heat Transfer by Solid-liquid Interaction Integral Solution Method

Molecular dynamics simulations on solid-liquid phase behavior of charged colloidal systems

Solid-Liquid Separation and Utilization of Waste Sulfuric Acid from Titanium Dioxide Production

Electro-flotation in solid-liquid separation and its kinetics study

Analysis on forces acting on particles in solid-liquid two-phase flows and their effects on sediment vertical sorting

Processing Technology and Analysis of Defects of Semi-solid Liquid Forging Rough Pipe of Copper based Gear Ring Casting

Solid-Liquid Equilibria of Several Binary and Ternary Systems Containing Maleic Anhydride

A quick flavor improvement of soy sauce by applying solid-liquid two stage fermentation with yeast and lactic bacteria

Calculation of solid-liquid equilibria for mixed aqueous electrolyte solutions

Computation of two-phase reacting flows in solid-liquid rocket ramjets

waste drilling fluid; solid-liquid separation; process; equipment;

Research on the Solid-Liquid Interface Stability of Multicomponent Alloys with CALPHAD Method

Determination of liquid velocity near wall region in a solid-liquid stirred tank

Analysis of the Mechanics Characteristic in Gas-Solid-Liquid Concrete Jet Nozzle

Brief Analysis on Exceeding Quota Precautionary Measure of Solid Liquid Mixed with Spirit and Spirit Solid

The Study of the Technology of Producing Persimmon Vinegar with Solid-Liquid State Fermentation

Research of Vibrational Energy Flow in Fluid-filled Pipe System Considering Solid liquid Coupling

Study on surface property and adsorption of nonionic Gemini surfactants on solid-liquid interface

Particle Velocity in the Three-phase Flow of Solid-liquid-gas in a Flotation Cell

Solid-liquid equilibrium of terephthalic acid in aqueous acetic acid at elevated temperature

Numerical Simulation of Unsteady Coarse-grained Solid-liquid Flow in Hydraulic Hoisting

Influence of boundary layer separation on solid-liquid two-phase flow centrifugal pump vibration

Numerical Research on Coupled Solid-liquid Heat Transfer and Two-phase Flow During Quenching Process

Preliminary Application of Solid-Liquid Automatic Hg Detector in the Hygienic Detection

The Simplified Computational Method of Diffusion Coefficient in the Solid- liquid Leaching

Effects of the Mixed Solid-Liquid Casting on the Tensile Strength of High Chromium Cast Iron

flow concentration basins Discharge mud Solid-liquid separation;

hefei talentgroup - centrifuges filters extractors separators and other products for solid - liquid liquid - liquid separations

Design of the solid-liquid two-phase flow pipeline experimental apparatus

Effect of Temperature Gradient of Mold on the Position of Solid-Liquid Interface in Heated-Mold Continuous Casting

Experimental study on external-cycling solid-liquid fluidized bed heat exchanger

Study on Thermal Deformation of High Chromium Cast Iron Prepared by Solid-liquid Mixed Casting Process

Calculation of Kinetic Parameter of Solid- liquid Phase Transition on Long- Chain Fatty Acids

Research on new fixed bed reactor with suspended package material for solid-liquid separation

Fabrication of Fe-Sn intermetallic compound powders by solid-liquid reaction milling

Prediction of solid-liquid equilibrium to synthetic nitro-musk by using UNIFAC group-contribution method

Two Approximate Models for Describing Solid-Liquid Phase Transition of Mixtures

Solid-liquid Coupling study on water inrush through faults in coal mining above Confined aquifer

Constitutive model of structured soil and elasto-plastic damaging analysis of solid-liquid coupling dynamic problems

Suspended - casting, Semisolid - casting and the Mixed Solid- liquid Casting

Solid-liquid coupling characteristics of fluid-conveying pipes

Application of solid-liquid separation by two-phase flow technique in the water treatment of power plant

Sensitive Analysis of Impact Factors on Solid-Liquid Two-phase Flow in Pipeline Hydro-transport

Computational analysis of water hammer prevention devices for solid-liquid two-phase flow pipelines

Application of ultrasonic flowmeter in measurement of liquid and solid-liquid

Laboratory efficacy criterions of public health insecticides for pesticide registration ELECTRIC SOLID-LIQUID PEPELLENT

Application of microwave irradiation in solid-liquid leaching

Pressure Loss in Solid-liquid Flow with Coarse Manganese Nodules in Vertical Pipeline

Surface ripple formation due to solid-liquid slurry erosion

Mechanism of solid-liquid separation and sludge recirculation in anintegrated oxidation ditch

Calculation for solid-liquid coupling vibration of fluid conveying pipe

Study on the Model of Photocatalytic Reactor of Solid-Liquid Heterogenous System

Research on seismic response of underground pipelines in solid-liquid media

Solid-Liquid Equilibrium of Terephthalic Acid in Several Solvents

subjecting the suspension obtained by the step (3) to solid-liquid separation to obtain solid;

Progress in Efficient Bio- catalysis Systems with High Solid- Liquid Ratio

N-Acylation of caprolactam under solid-liquid two phase transfer condition

Studies on the Solid-Liquid Equilibria of Maleic Anhydride in Diester Sebacate

Orthogonal Experimental Study on Solid-liquid Separation of Waste Mud

Research on Mechanism of Sludge Recycle in Side Channel Solid-Liquid Separator

Analysis on the Physical Stability of the Solid-liquid Mixed Fuel

Progress in studies of solid-liquid phase change materials for energy storage

Design and Experimental Research on Double-channel Pump of Solid-liquid Two-plase

Solid-liquid separation technology of waste drilling fluid

A generalized algorithm for solid-liquid equilibrium stage

Solid-liquid separation Foods dewatering;

The solid-liquid coupling two-qhase experiment and analysis of the protection of potentiona water in northern mining area of shaanxi

The Critical Speed of Heterogeneous Solid-liquid Phase Slurry in the Pipeline

Study on the Solid-Liquid Phases Equilibria of Musk Ketone and Musk Xylene Mixture

Energy saving problem of solid liquid separation technology in food industry

Kinetic study on solid-liquid phase transition of lycopene crystal

study on flash solid - liquid separation technology

Research on Solid-Liquid Separation in Humic Acid Extraction from Peat

Significance, Content and Method of Study on Solid-liquid Two-phase Flow in Pipelines

Diffusion and Stabilization Effect in Solid-liquid Two-Phase Flow

Discussion on Shear Modulus of Materials at Solid-Liquid Phase Region

The Phenomena of Solid-Liquid Two Phase Secondary Flow and Analysis Made on It

Kinetic model of particulate phase in dilute solid-liquid two-phase flows

Study on Measruements of Solids Holdup of Solid-Liquid Dispersions by Ultrasonic Technique

Research on segregation in solid-liquid interfaces

Basic Kinetic Equations of Solid-liquid Phase Flow Powder Binder of PIM

Research on the Stearic Energy Storage System with Solid-Liquid Phase Change under the Second Boundary Condition

Production technics of solid-liquid vinegar

Simulation of Solid-Liquid Flows in Fluidized Bed Reactor

Influence of PCA on Solid-liquid Reaction Milling Process

Spectrophotometric determination of platinum after solid-liquid extraction with 3, 4-diamido-benzoic acid at

Structure of FZ - 12 solid - liquid isolation machine and its application in treating pig farm waste

A High Efficient Solid- liquid Separation Equipment

Detecting system about the mass fraction of water in solid-liquid two phase non-Newtonian fluid

The Mixed Solid-liquid Casting Technology

solid - liquid separation of oily sludge

A Study on solid-liquid equilibrium of halite in brines

Research on the New Solid-Liquid Separator for EPS