solidification

Mexican middle of a blue water as if with solidification in the bottom.

Even at large undercooling, nucleation during solidification is usually controlled by a heterogeneous process.

Easy crystallization and easy to solidification of the medium and high viscosity should be used in the structure of large rotary spring.

Cheerful noisy scenes have gone like the wind, surrounded by silent silence, space-time like a general solidification.

Directional solidification process is an important part that of the physical metallurgy of solar energy polysilicon.

Autumn light! It was a quiet day together rich, crystal jade run. Is the moment of calm calm after solidification.

The surface of solidification sample was smooth, and the pores were the less and smaller after put the refinement into the alloy.

To cause to solidify or coagulate or to undergo a process likened to solidification or coagulation.

It is hopeful that the undercooling induced by a high magnetic field is big enough to make a whole solidification o. . .

The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.

Conventional planar flow casting(PFC)is one of rapid solidification processes for fabrication of microcrystalline or amorphous ribbons.

This distribution is helpful to understand refining effect of pulsed magnetic field on solidification microstructure.

The mechanism of the heat flux changing is explained by the temperature fields and the solidification developing of the molten field.

Results A great deal erythrocytes with inequality electron density were atypically like concave disk in natural solidification group.

Squeeze casting is a process which involves the solidification of a molten metal in a closed die under disposed high pressure.

Dispersion strengthening through solidification processing is an innovative route compared with traditional powder metallurgy route.

At this point, the whole of the same air as the solidification.

To understand the influence of minute film thickness on the volume changes after the solidification of zinc phosphate cement.

Solvent near hair hot melts solute dissolved in a solvent, low volatile temperature solidification, and persisted at the time of matozoa.

Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place.

The relationship between the laser processing parameters and laser directional solidification morphology was analyzed by the model.

This paper articulates the properties of the compound wasteful mud solidified agent and its treatment technology of solidification.

Cyanoacrylates give off heat on solidification. In rare cases, a large drop will increase in temperature enough to cause a burn.

Forth, resonance could promote the scouring of solidification interface by melts, which refined the grains across the cross-section.

The enthalpy model was used in calculating the solidification period of a new kind of phase change material in cool storage ball.

The finite differential method was applied to develop a simulation software for solidification temperature field in continuous casting.

The results show that the optimum technology can ensure the progressive solidification of the castings and eliminate shrinkage and porosity.

In the light of the different forms of solidification, the adhesive can be classified as 4 types.

The main technological properties are linear expansivity, tensile strength, flowability and solidification time.

The solidification happens when the quasi-citizens convert into citizens, it is the symbol of the form of ternary social structure.

Our univer-city, splicing into containers, is no longer the simply solidification of concrete structures.

By the new method, the formation of peritectic phases can be shown graphically throughout solidification.

Steady thermal analysis based on solidification process is performed. based on which structural integrity of SRM is investigated.

Phase field method is one of the most powerful methods in the modeling of solidification.

At present, phase-field model is a heated topic as an effect method in numerical simulation of solidification microstructure.

The experiment results show that the melt superheating treatment has remarkable influence on the solidification microstructure.

During encapsulation process, used optical photosensitive adhesive rapid solidification method under UV irradiation.

Inclusion. Foreign material or non-metallic particles entrapped within the metal during solidification.

Solidification-heat was modeled by means of equivalent-specific heat method.

The filling process, solidification process and air entrapment condition of the aluminum casting were shown by numerical simulation.

MEMS; hot embossing; isothermal solidification; solid-liquid interdiffusion ; metallic micro-devices.

The redistribution of solutes during steel solidification induces macrosegregation ultimately.

Formation mechanism of microporosity is the results of interaction between thermodynamics and solidification mechanism.

A hot melt adhesive is defined as an adhesive applied from the melt and gains strength upon solidification and crystallization.

primarily UV photo-solidification initiator series products and pesticide, medicine, dye intermediate service products.

The results demonstrate that solidification process may be divided into two stages: quasi-state stage and accelerating stage.

Technology of soil solidification in civil engineering is always given to attention long time.

Thirdly, the different initial states of liquid metals would remarkably influence the solidification microstructures.

The results show that the ultrasonic treatment in high carbon steel could refine solidification structure significantly.

Discussion on Several Basic Problems of "Proportional Solidification Technology" --An Approach to Shrinkage Problems of Nodular Iron.

Solidification and composition segregation of billet are important factors which affect homogeneity of mechanical property of steel.

Cement solidification with cement curing agent for the hazardous waste solidification processing method.

at the end of the alloys solidification, a "shock shrinkage" occurs, which leads to the hot cracking.

Curing: The rapid solidification of ink OR varnish by means of chemical action.

Computer is used for the numerical simulation of temperature field of the solidification process of heavy-section ductile iron casting.

The results showed that the pulse electric current with high density obviously improved the solidification structure.

Fly ash cement bears excellent properties except for its lower strength in the early solidification period.

The validity of the apparatus to the research on the solidification behavior of ductile iron with heavy section was verified.

The compounding is made of ethoxyline resin chemicals and solidification inhibitor.

The results showed that the diffusion rate of two kinds of organic solvents were different during the in vitro solidification procedure.

Distribution of pulsed magnetic field and pulsed magnetic force during solidification was studied by numerical simulation method.

The results indicate that the weld solidification crack can be predicted with combination of Trans--Varestraint test and FEM.

Progress in both macro and micro numerical simulations of solidification of particle reinforced metal matrix composites was reviewed.

Surplus space for mud pit and sewage pit should be maintained for solidification and cuttings delivery after well completion.

The effect of heat insulting feeder is to increase the feeding effect of the feeder through prolonging its solidification duration.

This paper presents laboratory research results of cement solidification of borate acid liquid wastes and concentrates arising from PWR.

And the applications of unidirectional solidification technology in material preparation are introduced.

The research results may also help to improve the fabrication processes of directional turbine blade solidification.

afterwards on the base of the proportional solidification theory, the casting's riser and pouring system were designed.

The filtering mechanism acting on the solidification and mechanical properties of the alloy was analyzed.

Some solidification processes were analyzed by explicit finite-different method under different locale crafts.

And the asphalt solidification sludge, no matter how kind and character, can obtain the stable performance of the solidified body.

A heat conductive insulation adhesive with good heat resistance by medium temperature solidification was developed.

Ingot solidification is in the mold under high temperature inside, and difficult to direct observation and control.

and secondly, dropping the liquid resin on a base material, and obtaining the product after cooling and solidification.

The basic work principle and method of an new style smell dispel solidification of chicken manure are introduced.

The influences of phosphorus content and solidification rate on the interfacial morphology are investigated.

This kind of social memory receive, solidification and pass on through the drill of subject and knowledge.

This study provides the foundation ac cording for developing the green solidification grain refine technique of aluminum alloy.

Casting of heavy casting steel is a complicated process with high temperature and dynamic solidification condition.

The solidification characteristics of slab casting in Xinsteel and its requirements for mold powder are introduced in this paper.

This paper studies the ultrasound treatment, EMS, ultrasound and EMS on the Al-Si-Mg alloy solidification organizations affected.

Otherwise, the solidification structure for different superheat was simulated.

The research actualities of electric current pulse on improving metal solidification structure are overview ed.

The applied physical field on solidification to refine grain is presently the hot research direction in material processing.

Researching the solidification characteristic of the cement, it selects the appropriate system of cement.

On the base, the paper analyses the structural integrity of solidification and launching in low temperature of Solid Rocket Motor.

A solidification matrix includes a straight chain saturated carboxylic acid salt, sodium carbonate, and water.

Can bark and conduction electricity plastic, which can quick the solidification as outside packing sealing, .

In this paper we consider an one-dimensional solidification problem of a finite domain.

The technique provides a new path to studying some nonequilibrium phenomena in rapid solidification for researchers.

Liquid phase separation is a special phase transformation for some alloys in rapid solidification process.

Furthermore, the application and the further research of electric and magnetic fields on the solidification of metal are expected.

A new technique using strong pulsed magnetic field was first proposed for refining metal solidification structure .

This type of sealant is soft solidification of the sealant, construction remained quit after the state.

The rules of heat exchange on the interface of casting and model were set up, and the solidification temperature fields were simulated.

18 section, this paper sums up construction methods of soft foundation solidification, emphatic ally introduces vibro-replacement process.

The equilibrium eutectic temperature is calculated for solidification of gray, ductile and white iron.

To describe the solidification in caster mold, a twodimensional fully thermomechanical coupled finite element model was established.

High water cement ratio during construction and low water cement ratio during solidification are realized.

In particular, gold and silver ink, than normal UV ink prone solidification and glorious variable weak long-term storage, so don't.

Many faults in castings are tightly associated with the solidification process of the liquid metal.

Many erythrocytes displayed untypical concave disk in anti-solidification group.

Outer cladding metal nearby the fusion interface of roll mandrel experienced the process of solidification-fusion-re-solidification.

There is no other beauty can compare its solidification and content with architectures .

The mechanism of the effect of current impulse on solidification structure was qualitatively discussed.

The wetting angle of the rapid solidification solder is smaller than the ordinary solder, and the spreading area increases.

Third, some more cohesive. The thin is viscoelastic on solidification, reheating melting, use it again.

The effect of withdrawing rate on the solidification microstructure of a single crystal superalloy DD6 was investigated.

Empressement , Goodness, Solidification, Braveness, ----The god loves soldiers who are for Peace, for Honor, for Love.

Rapid solidification of ternary eutectic alloys is an important research subject in the field of materials science.

The gravity plays an important role in the columnar-to-equiaxed transition (CET) during solidification.

The problem of the fusion and solidification of material has been solved by the method of changing the element material.

The primary silicon particles precipitating from the solidification of Al-Si hypereutectic alloy was regarded as inclusions.

Pale face goes on solidification bitter expression, trembling lips have lost the ability to express.

Igneous rock is rock formed by solidification from a molten state; especially from molten magma.

In conjunction with adhesive curing time refers to the solidification process.

The latest progress on numerical simulation of mold filling and solidification processes of shapedcasting was reviewed.

Laser cosmetic surgery is the use of laser thermal effect of the lesion to solidification, charring, or vaporization.

The effect of different additives on solidification of high carbon steel with ultrasonic treatment was investigated.

The solidification and larkishness of those moments exposed my conflict and anxiety.

To obtain the high-quality forged steel ingot, it must control the ingot solidification process.

The image has a glass texture in heating occurs after the formation of expansive, raised image and solidification.

During the solidification in the mould carbon monoxide is formed and the gas makes the steel boils.

The paper discussed the sectional structure of cross flow road in beach, earth solidification technology &mold experiment in laboratory .

The effect of pulsed magnetic field on the solidification structures of the Aluminum liquid was studied.

Forming technology has been upgraded from electrical coating to con-clad and version solidification.

High energy density electron beam is employed in surface rapid solidification on Ni plated Ti alloy.

Its tendency to solidification hot cracking large than conventional 300-series austenitic stainless steel.

The ideal good ofmaize with wettability, water content is low, the bond of strong, solidification of faster, forming diagenetic.

The technic of directional solidification is reviewed briefly.

To develop conical cavities during solidification.

This is an algorithm solidification simulation about "multiple nodal region" in boundary node of casting and mold system.

The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.

The effects of high pressure on the solidification structure were discussed.

Using the correction paper, waiting for solidification of the liquid is not needed, thus being faster and more convenient.

Graphite types have also some effect on the volume change of the solidification.

Computational methods , which include a fixed grid and general source term based on dealing with melting and solidification, are employed.

The layer structure is easily formed in the solidification process of immiscible alloys.

Spray forming is a novel rapid solidification technique which is suited to prepare superalloy turbine disk billets.

Sunshine water in glass windows solidification with.

The solidification mode evolving regulars of ZA42 in different current intensity was studied in this paper.

First of all, fixing colour dye when heat melting and solidification on paper, forming a Scripture.

The peel and the adhesion strength of various solidification fraction of the ETPB were studied.

Inside the nugget zone, solidification cracks are found.

An approach for rapid prototyping and manufacturing of ceramic parts was developed based on the quick solidification of wax.

The solidification matrix may be used, for example, in a solid detergent composition.

They also undergo a high shrinkage or reduction in volume during solidification.

Relation between melting rate and solidification quality and how to obtained the reasonable melting rate is discussed.

The development of filling and solidification numerical simulation software was also briefly introduced.

Discusse basically the process mechanism of pulse current impact on the solidification process.

rock formed by the solidification of molten magma.

Something, such AS the latex in certain paints, that creates uniform consistency, solidification, or cohesion.

In the process of soft reduction during slab solidification , the on-line calculation of temperature field in the slab is very important.

Formed by solidification from a molten state. Used of rocks.

Risers are designed and placed so as to ensure filling the cavity during solidification.

Pasting bearing in mind that in the process, be sure to prevent gum solidification of transcather micromorselized and impurities in a plate.

And inexhaustible eternal wealth and power source. Don't underestimate the photograph, it can solidification calendar.

Such as oxidative drying printing ink, penetration drying ink, volatile drying printing ink, solidification drying inks.

After solidification by making fiber and spun by it.

Solidification structure of LY12 aluminum alloy under pulse electric current with high density was studied.

It is very important to investigate and optimize the directional solidification process to obtain a high purity and integrated ingot.

In addition, the process control method is discussed in view of the varying solidification parameters.

Art in space and time solidification?

Besides further solidification of china market, we are opening the skylight to the oversea market, which is so bright and so attractive.

The RBSC materials get the fracture strength 594MPa by In-situ solidification forming.

In addition, asphalt solidification processing and can harden, without like cement that after 20 ~ 30 days of maintenance.

The influence of electropulsing density on solidification structure of ZA12 alloy was studied.

A new approach which was zinc alloy solidification under mechanical vibration was proposed.

Elementary Analysis of Cement Solidification Technique and Technology for Mud.

Biodiesel is easy to crystallize under low-temperature because of high solidification point(SP)and high cold filter plugging point(CFPP).

Hemorheology is to study the mobility, viscosity, deformation and solidification of Blood.

Small spill and : After solidification and cooling, place in an appropriate leak

Solidification Simulation Used for Defect Forecast of Automobile Nodular Iron Castings and Influencing Factors

Numerical Simulation of the Solidification Process of a Heavy Roll Stand for Temperature Field and Thermal Stress Field

Optimized design of prestressed cable anchor used for slope solidification

A study on solidification of cells used for concentrating viruses in water with adsorption method

Study on Casting Solidification Process Taking into Account of Convection and Radiation

Numerical Simulation and the Application for the Temperature Field of the Ingot Solidification Process used for Forging

Optimization Study of Molten Steel Solidification Structure under Ultrasonic Treatment

Simulation study of effects of initial melt temperature on microstructure of liquid metal Na during solidification processes

Effects of Withdrawal Rate on Solidification Parameters and Microstructure of a Nickel-base Single Crystal Superalloy

Theory of Travelling Magnetic Field Excited by Permanent Magnet and Its Refine Function on Metal Solidification Structure

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

Alternative Direction Implicit Iteration Applied to Calculate Temperature Field for Casting in Solidification Process

evolved during solidification, since only up to this

Simulation study of microstructure transition of liquid metal In during solidification processes

The results show that: manganese lowers liquidus and eutectic temperature, and narrows down the temperature range of solidification;

Producing Artificial Joints by Means of Directional Solidification Cast

Research on Fatigue Life of Optical Solidification Composite Material for Aircraft Structure Damage

the conditional access module and the secondary storage module and battery can be in on-board solidification or extrapolation mode;

Dissipation Structure in Highly Undercooled Alloy and Its Influence on Solidification Microstructure

Plastics solidification method is characterized by: in general can be operated in normal temperature for polymerizing the mixture;

Influences of Crystallography Orientation of Substrate on Laser Directional Solidification Single Crystal Microstructure

Characteristics of Irregular Interface Pattern during Unidirectional Solidification

Simulation study of effects of cooling rate on microstructure of liquid metal Na during solidification processes

gmt . fibre reinforced plastics - glass mat reinforced thermoplastics - determination of flowability and solidification

Features of a bone substitute formed by in situ solidification of porous carbonated hydroxyapatite cement

Complex Solidification Technology for Treatment of Waste Drilling Fluid and Its Engineering Application

Solidification Analysis and Its Numerical Simulation of Aluminum Alloy under Local Pressurization

Distribution Characteristic of Magnetic Field in a Rectangular Cold Crucible for Directional Solidification of Ti Alloys

Study of the Influence of Cold Flow Improvers on the Characters of Low Solidification Point Diesel

New Method for Approximate Solution of Two-Dimensional Solidification in a Square Cavity

Development Status of Numerical Simulation for Microsegregation Prediction during Solidification

The numerical simulation of directional solidification process for large-scale frustum of a cone ingot

Casting Solidification Simulation of Sand Faced Permanent Iron Molding Technology and its Application

Review on Modification Mechanism of Primary Faceted Crystal during the Solidification During the Solidification Course

Computer Detection and Analysis of Solidification Parameters During HRS Directional Solidification of Single Crystal Superalloys

Numerical Simulation of Mold Filling and Solidification of a Nickel Alloy Vane Investment Casting

UV photochemical solidification adhesive basic material--the preparation of polyurethane acrylate, prepolymer

Characteristics of Isothermal Solidification Stage and Analytical Solutions for The Stage in Transient Liquid Phase Bonding Process

Verification on Stainless Steel Continuous Unidirectional Solidification

Experimental Study of Quicklime-Ash Solidification of Heavy Metal Contaminated Soil

Molecular Dynamics Study of Melting and Solidification of Nanometer Copper Clusters

The Application and Development of the Combination Electromagnetic Field Technology during the Solidification of the Material

Microstructure and Mechanical Properties of Continuous Unidirectional Solidification Copper Bar and Cold Processed Wires

Solution of the Shrinkage Cavity and Porosity in the Cylinder of Compressor Adopting the Proportional Solidification Technology

Microstructural study of spent ion exchange resin ASC cement-solidification matrix

Casting Solidification Simulation of Dynamic Determination of Multiple Molten Pool Liquid Isolated and Shrinkage Cavity Predication

Numerical Calculation of Transient Solidification and Remelting Process in Centrifugal Infiltration Casting

Simulation for the Effects of Natural Convection on Microstructural Evolution during Solidification Process

Stability Factors Affecting the Process of Two-Flow Continuous Unidirectional Solidification in One Furnace and Countermeasures

Numerical Simulation of Microstructure Formation during Solidification Process in Heated Mould Continuous Casting

Effects of the ratio between adhesive and solidification agent on the physical properties of the investment for zirconium-oxide titanium

Microstructure and Solute Concentration Distribution of Solidified Layer in Electron Beam Surface Solidification Treating Ni-Plated Ti Alloy

Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

Heat transfer analysis of experimental unidirectional solidification of aqueous ammonium chloride solution

Numerical Simulation on Solute Segregation During Solidification in Fiber Reinforced Aluminum-copper Binary Alloy Composites

Progresses in Numerical Simulation of Solidification Microstructure Using Cellular Automaton Method

Application of the Normal Temperature Solidification Fluorocarbon Resin Coating

Optimization of Thermal Stress and Deformation of the Casting During Solidification by Neural Network and Genetic Algorithm

Using Proportional Solidification Technique Improving Castings Quality

Inversion Casting Stainless Steel Composite Strip: Its Characters of Bonding and Solidification Microstructure on Interface

Application of Proportional Solidification Technology Reduced Waster Rate in Centrifugal Casting Cylinder Liner

Simulation Study on Solidification Microsegregation in Fiber Reinforced Aluminum Matrix Composites

The Valence Electron Criterion on Heterogeneous Nucleus Catalysis During Non-Equilibrium Solidification of Austenite Steel

Phase field modeling of directional solidification of a binary alloy at high velocities

A preliminary investigation on role of auto-solidification calcium phosphate cement loaded with drugs in treating traumatic osteomyelitis

Numerical Simulation on Solute Macrosegregation During Solidification in High Carbon Continuous Casting Billet

Numerical simulation on solute segregation during solidification in fiber reinforced aluminum alloy composites

Using Computer Solidification Simulation to Optimize Foundry Method of A Driving Wheel Hub

Test Study of Soil Solidification Technique in Pipeline Construction Built in Loess Area

Production Application of Casting Solidification Numerical Simulation

The Application of Stiffness Increment Variation Method in Numerical Simulation of Castings During Solidification Process

Numerical simulation of magnetic field distribution of Al alloy directional solidification under applied pulsed magnetic field

Formation Mechanism and Morphology of Solidification Structure in a Light Beam Powder Surfacing Layer

Effects of Development in Directional Solidification on Purification Technology of High Purity Aluminum Segregation

The Application of Proportional Solidification to A Timing Gear Cover of Medium Speed Diesel Engine for Ships

Morphological stability of coupled growth during directional solidification of eutectic and peritectic alloys

Study of Pulsed Magnetic Field and Pulsed Magnetic Force during Solidification