shearing

The improved, easy-to-use design protects better and eliminates gasket rupture, cutting or shearing when plugs are tightened.

Still another kind of force, which seems to make the layers or molecules of a material slide or slip on one another, is a shearing force.

The lathe dog which drives the work tends to produce a shearing force.

Additionally, it is possible to generate shearing force by some factors like the change of temperature or support displacement.

The magnitudes of the shearing stresses and bending stresses vary along the length of the beam and with distance from the neutral axis .

The pressure filtering belt of the belt pressure filter is not easy to deflect when running, and the extrusion shearing effect is better.

The work is converted to heat by shearing the plastic, making it a semifluid mass.

This type of cutter cuts with a shearing action, which can produce a very fine finish.

Shearing once said the birth of rock 'n' roll gave a new dimension to his repertoire.

A extensional tectonic movement and a strong compressor-shearing strike-Slip movement are occurred after two main thrust.

Nurse Alert The nurse must avoid dragging a client up in bed. Dragging against the bed linen causes shearing force.

Shearing interferometer in suitable for the determination of the position of image due to its simple structure and easy operation.

Examples of this type of transformation include such actions as translation, rotation, scaling, shearing, or any combination of these.

If decisive falling away or shearing off of a portion of the concrete mass occurs during the test, the measurement should be disregarded.

Within reasonable limits, the presence of the shearing stress has no effect on the value of the bending stress, and vice versa.

It consists of a suit of sampling set, a movable vertical loading system and a horizontal pulling shearing system.

The mean unit force of friction to a great degree depends on shearing of pressure welding bridges and conquering of ploughing resistance.

Shearing increases or decreases a color component by an amount proportional to another color component.

The maximum shearing stress to which the material is subjected has a value equal to the radius of the circle.

The diagram of shearing force is formulated by trigonometric series and used to determine the coefficients in above expansions.

The pressure of the cutting tool against the work produces tension and compression, as well as a shearing action.

A lower viscosity oil has no place to reduce down to when it gets hot and starts shearing.

"I know that there is quite a bit of talent around and it's too loud, " Shearing said.

This paper stresses that the main motor must match system fly wheel torque, and there must be proper speed drop in shearing.

The variations of the cutting tools radii do not show any significant effect on the shearing surface quality in this study.

Jointed rock mass is usually in a compress-shearing stress states because of geology structure influence.

Application They are used for the main feed mechanism of shearing gate on CNC-Controlled paper cutting machines.

The shearing wind helicity and thermal wind helicity are introduced and applied to a northeastern cold vortex rainfall event.

The dilatancy characteristics of the discontinuities under shearing are analyzed; and an interpretation of the phenomenon is provided.

The adroitness it showed in shearing off the wings of the flies, which were always rejected, was worthy of observation and pleased me much.

Mechanical tenderization can destruct muscle tissue, reduce shearing value and improve the sensory tenderness of a product.

The flexural loads of out-of-plane bending, twisting, and shearing are assumed to act upon the plate edge at infinity.

Others, like the horned triceratops, were clearly adapted to shearing plant material.

The result of this shearing force is to push the endoplasm forward.

Resource companies offer better wages and conditions than shearing, one of the toughest jobs in Australia.

Objective To evaluate the safety of Shearing fracture ligation combined PPH for mixed hemorrhoids with a multi-center clinical study.

The Jinshan gold field in Jiangxi, a type of ductile shearing zone, is of a super large gold deposit.

Intensity of original main body of flying shear, shearing structure and gear box was analyzed and calculated to be modified by salvaging .

He is carrying a pair of scissors, flying east and west, shearing south and north, selling out spring inch by inch.

This interferometer used grating as its shearing part. It has characteristics of simple light route, compact structure, low shockproof.

The total viscosity of the oil changes with heat and sliding speed (shearing of oil molecules).

Sheep shearing is often a backbreaking job, where thousands of kilograms of sheep meat are shifted every day .

Machines of this series feature low shearing rate, even plasticization, reliable quality, wide application range and long servicing life.

The shearing strength at the foundation, where the concrete is placed on a smooth rock surface, may be lessened.

The orientation of mylonites indicates that the ductile deformation is of right-hand shearing character in KSTB.

The effect of cutting radius on steel reduced web connection is analyzed considering both the moment and shearing force.

Five years, shearing alpaca in Peru to have to hold a sacred and unique ceremony.

The results show that the method is relatively immune to noises and is promising in practical shearing interferometry.

It was resulted from the early compressional shearing, and underwent dextral shearing in the late stage.

Thus it is proposed that the error grade iterative BP neural networks method be applied to the asphalt mixtures shearing strength forecast.

They aggregate the projections in a hierarchical structure involving the shearing and addition of sparsely sampled images.

Model predictions demonstrated that fibers resist shear even when the shearing direction does not coincide with the fiber direction.

The analysis results will offer a base studying a cap suffering from punching and shearing and for computing reinforcing quantity.

The work will proceed on an 18-month timetable, or two shearing seasons.

The motion of the transport car can drive a welding gun of the welding machine to align a shearing port to carry out welding.

This paper studied the mechanism of the shearing resistance about the column base in portal frame of light gauge steel structures.

The influence of two different shearing terminal conditions is investigated on the calculation results.

The utility model relates to a table folding shearing machine, belonging to a manual folding shearing device for metal plates.

The shearing time too long will cause the product out of oil, too short cannot reach the emulsion requirement.

MPA fermentation needs high dissolved oxygen and is not very sensitive to shearing strength.

Finishing: this operation includes shearing, cooling, leveling, inspecting and testing, surface treatment.

and a shearing oil cylinder and a kicker cylinder are floatable connected with the tool post.

Participate in the competition are mostly herdsmen shearing near the specialized skilled workers.

for slope design, we have to consider the shearing strength which of earth will be reduced due to being soaked in up-stream water.

The present invention discloses one kind of cold and hot shearing edge steel for shearing thick plate and its production process.

As the yield increased, the residence time in PFR was less than that of CSTR and the immobilized cells were not hurt by the shearing.

On the base of the lateral shear interferometry, different methods of shearing wave front reconstruction are described in this paper.

Through theoretical analysis, a shearing capacity formula was advised to guide the design, which has a great promotional value.

bubbling was introduced in the latter, the movement of bubbles near the membrane surface enhanced the shearing.

Surface investigation showed that there were shearing, tensing and crush-pressing fissures.

Superfine cement interfacial agents with expansion agents, silica fume and super plasticizer had high adhesive shearing strength.

The structural deformation of fault zone is mainly characterized by compressor-shear structure or shearing compressive structure.

The thesis discusses the device of testing magnetorheological fluids shearing stress from its construct, mechanism of working.

I use the reaphook to slice off the bread, as alike as shearing through the wheat. Well then I use the tears to answers thy question.

Morphology, stages of the tectonic activities and zoning of the ductile shearing tectonite control strongly the gold ore.

Re-disappeared polymer powders noticeably increased the adhesive shearing strength of cement-based interfacial agents.

The feed material is broken between the counter- rotating rolls and crushed by pressure and shearing stress .

Shearing avoided the trappings of jazz fusion, synthesizers and electronics that arrived late in his career.

Conclusions and advices are given in the last chapter. The appendix lists shearing torque calculation programs compiled with C .

The utility model relates to a multi-cutter filament breaking combined machine, which belongs to the technical field of shearing equipment.

Despite being blind, George Shearing became one of the world's most popular performers.

rigid cellular products with rubber or plastic base . shearing test . determination of apparent shearing coefficient.

Ductile materials undergo considerable plastic tensile or shearing deformation before rupture.

We propose a RGI with a different optical configuration that includes a lateral shearing in addition to folding and reversal operations.

The inner polymerization force and inner friction angle of the samples are tested by tri-axial shearing stress experiment.

I had to help with shearing sheep, picking fruit and hunting vermin.

the shearing resistance of this material is increased along with the increase of cement consumption.

Rocks underwent strongly shearing deformation. The mineral deposit type belongs to the sedimentary and transform one.

For now Messrs Lee and Hughes, and their workers, keep busy shearing, steaming, shaving, cutting and drying huge logs into rough chopsticks.

This provides the theoretical fundamental and economical method for researching the steel tube shearing without sawing.

The rheology properties of Changqing waxy crude oil after different shearing action history was experimentally studied.

Products: press brake machine, shearing machine, three roller bending machine, power press machine. . .

The results have shown that the interfacial agents can improve the interfacial adhesive shearing strength.

Anti-shearing framework dense structure was formed in new design method by the combination of coarse and fine aggregate.

When adopting water back-flushing mode, removal of impurities on the filter material is completed thorough impacting and shearing.

The jet slams violently into the fissure, shearing off the gear and engines.

The performance of gel system, including salt tolerance, stability and shearing resistance are studied in laboratory.

The big area of swelling floor surface and plastering floor result from the destruction of shearing stress from the adhesive layer.

The influence of shearing deformation on the internal quality of forgings in upsetting was studied through experimental test.

The results show that the shearing stress rises and the apparent viscosity of composite reduces with increasing of shearing rate.

I start shearing the sheep at the beginning of July.

In this paper, the method of design and installation of viscous shearing damper for the strand cables of cable-stayed bridge is presented.

The processing method for the metal button adopts the process flows of stamping, shearing, punching and electroplating.

Feed clamp device make positioning correct and clamping reliable, ensure the workprece parallelism and precision of the shearing size.

With variation of shearing angles, the strength curve equation of thenardite and calcium thenardite salt rocks are deduced.

The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.

Numeric-control front feeding device is employed and the rear stopper device is removed, to gain higher shearing precision work efficiency.

Converge drying and cleaning into an integration, equipped with high-pressure cleaning and water shearing devices.

A ratio of strength to thermal conductivity is proposed to characterize the adiabatic shearing sensitivity for steels.

The study can be used as a reference for improving the shearing precision and optimizing the system structure.

As a patent product, the working mechanics, structure and features of XJH type highly shearing and crushing mixer are presented.

The mixing shearing is the very process of complete contact between particles and reagents under certain action of hydrodynamic.

Due to shearing of the pin, the weak shear textures are formed in the WZ by rotation of the grains after the FSP.

Rory: Dear Mr. Farmer, why do there have to be shearing days?

CLASSIFICATION OF MACHINE TOOLS. FORMING MACHINES, SHEARING MACHINES.

I was shearing the rear of a swearing man with a peculiar spear.

The relationship equation is deduced, and then proved by the compression and shearing experiment on rock.

But tests in sand indicates that the shearing strength parameters of sand is barely affected by shearing paths.

In chain termination reaction station, when adding some urea, the shearing stability of grease is improved greatly.

Its application situation on heat shearing blade, guide plate and nodular indefinite chill roll are introduced too.

A sensor of shearing force is the main measured instruments in the wood mechanical processing field.

Steel wire ring alone can form great shearing force, which may cause fragmentation of symphysis pubis or steel wire breakage.

Adhesive layer is the key to influence the anti-shearing characteristics on the parking section asphalt pavement of BRT.

The manufacturing industry often uses the shearing and punching processes to cut the metal sheet into circular blanks.

In this paper, non-linear buckling analysis of the membrane under shearing loads is performed by incorporating the ANSYS SHELL63 element.

Tannery machines - Splitting and bandknife shearing machines - Safety requirements.

The freedom between blades of tools may be self-regulated by NC system to achieve precise shearing.

The results show that the new model can properly reflect the weakening and failure process of rock bridge during shearing.

Dear Mr. Farmer, why do there have to be shearing days?

For shearing force lag in outer tube, sections of beams in outer tube are augmented and sections of corner columns are adjusted.

The interfacial shearing stiffness will soften with the increase of the load level.

A suspension of monosized colloidal spheres (1) is subjected to a composite shear (6) by applying a sequential set of shearing forces.

Meanwhile, in the superposition beat shearing force wall, the precast block and the core concrete part can work cooperatively.

So, the study of the protection device eventually comes down to the study of the bolts'shearing strength.

When the interfacial bonding strength increase, the interfacial shearing stress on the whisker increased.

The values of micro-tensile bond strength and shearing bonding strength were different and the former was obviously higher.

The method of spherical surface shearing suitable for the location of near and far earthquake was proposed.

new concrete component and the shape and size of concrete slab are main factor affecting the shearing stress in layers.

They are suitable for electric motors, tra-nsformers and for shearing silicon steel sheets in household appliances industry.

thawing temperature has a slight effect on the shearing strength properties of saturated undisturbed silty clay.

Angoras may need special protection from the coat(cold) for about a month after shelling(shearing).

the maximum shearing stress is proportional to the polar moment of the cross section.

The molars were very narrow shearing teeth, especially in the lower jaw, but possessed multiple cusps.

The calculations of shearing and bending stresses in the material of the structure will be dealt with later.

The effects of toughener and filler on shearing strength and impact strength of epoxy adhesives were studied.

The best feature of the machine are low shearing loss, clean cloth and the same height.

my subject study stress on measuring the tenderness of meat . it ' s core is the measurement of shearing strength.

In the macro-mixing stage, convective mixing domains and shearing mixing plays an important role in micro-mixing stage.

To valuing the interlock strength of gravel base, we also had done large-scale straight shearing test in door.

At the same shearing flow, with xanthan content increase, the viscosity of starch pastes added.

Angoras may need special protection from the cold for about a month after shearing. The shearing.

A fluid is a substance which deforms continuously under the action of shearing forces, however small they may be.

Angoras may need special protection from the cold for about a month after sheering shearing.

Shear Springs are built on the diagonals of quad faces and provide some resistance to shearing forces in the cloth .

Precision- machined , bottom and top edges provide shearing action for pulp stock and slurry .

The edge-clamping roll device is mounted in the rolling position of the shearing machine.

Neil Shearing of Capital Economics, a consultancy, reckons it may be down to as little as 3. 5% by the end of 2008.

The un-drained shearing strength of saturated loess will degenerate under cyclic loading.

An optical path splitting 2 D shearing interferometric optoelectronic measuring system is introduced.

JQB Series Shearing Pump is mainly used in preparations of chemical medicine of oilfield.

another one is the change of soil's structure attribute to the cumulated of plastic shearing strain.

Eliza Gonzalez sculpted the snow lady with her daughter, Maria Conneran, 21, and son Jack Shearing, 12, after last week's snowstorm.

In reality, however, the mode of fracturing is combined with compression and shearing, as observed in many rock engineerings.

Then the code applies the shearing transformation described in the preceding paragraph to each pixel in the image.

Triple support rolling guide rail to eliminate gap of support and enhance shearing quality .

edits the program which analyzes the shearing resistance of shear walls by FORTRAN language.

Based on laboratory tests, the compaction property of limeflyash soil and its shearing strength are analyzed under different flyash content.

The fracture mode of the alloy in T6 state is transgranular shearing and intergranular dimple mixed fracture.

Higher spinning temperatures and lower shearing rate caused PP to form disperse phase at higher composition ratio.

The behaviour of CFST members subject to shearing still needs to be studied deeply. And it is very important in engineering practice.

Hull structure of container vessel should have adequate shearing strength, buckling strength and fatigue strength.

Because water-fracs treatment has happen to shear fracture, the fracture type is shearing type.

Adjustable shearing angle to reduce deformation of the sheet.

The mainframe is fitted with numeric-control system special for shearing machines.

Angoras may need special protection from the coat cold for about a month after shearing.

BI Yu-feng. Research on Test Method and Parameters of Asphalt Mixture's Shearing Properties[D]. Shanghai: Tongji University, 2004.

Formulas of shearing stress and bending stress were derived, and the failure criterion was given in the paper.

The results of wheel tracking test and the high temperature longitudinal shearing show they have fine linear correlation.

The results show that focus phenomenon of shearing force on mutation of floor stiffness is obviously minished after isolated.

When shearing force or axis force is relatively great, great errors of moment arise when the method of pure bending is employed.

Non vulcanized rubber. Methods using a shearing disk viscometer.

The following table lists the color vectors for the four bars before and after the shearing transformation.

and under a inclined load, the shearing effect of the soil on the pile end.

Constructing shearing and distributing ship plates production line which can process 25 tons ship plates, parts and T bars.

Have experience on CNC machine , robot, shearing machine etc. . .

They can be adjusted automatically by CNC system: stroke of the back gauge, shearing angle, shear stroke, blade gap.

The additional shearing introduced by bending of fiber yarn is considered.

The ore-formation was obviously controlled by ductile shearing fault.

The critical factor was found out from comparing the adding shearing wall, sticking steel plate and other methods.

Sheep are hardy animals, needing little care, except at lambing and shearing time.

Only using the shearing machine, the crushing method has the advantages of short technological process, high work efficiency and low cost.

Raft-style foundation, RC frames and shearing-force wall structures.

At last, based on the research of the key parameters of the opposed die shearing mold, the paper designed one die for some cams.

But it soon discovered that trading capital was a better way to get the attention of kings and emperors than shearing sheep.

The simplest is the ideal-fluid model, which assumes no resistance to shearing.

The mineralization is localized by faulting and shearing.

Tested data show that the shearing strength of aluminum plate base treated by the method is increased by 82. 2%.

In the first time, a theoretical study on ductile shearing bands based upon strain gradient plasticity theory is conducted in this paper.

The directly shearing test of soil plays an important role in soil laboratory tests.

The shearing force reduced with the fat content increased in muscle.

Set up the strong wind water shearing the drying system of hot wind circle.

Based on the calculation and analysis, the abac for shearing stress calculation in the range of normal parameter is obtained.

19Rachel then took advantage of Laban. While he was shearing his sheep she stole her father's family gods.

Plates and other stock may be cut by machining , flame cutting and shearing .

Set up strong wind water shearing and hot air cycle drying system, dry quickly and effectively.

Shearing was born in England but settled in the United States in 1947.

The shearing stress of the composite rises with increasing of shielding agent loading and so does the apparent viscosity.

Drying: Strong wind water shearing and tunnel drying.

Four kinds of failure modes were distinguished: bulging rupture, shearing rupture, shearing crushing and compression crushing.

The shearing extension is a main factor in the extrusion process of LC polymer melt.

Size of rear blok stop and shearing numbers has digitaldisplay apparatus.

The deformation and strain rate is not equal in different part of ECAP materials, and this is beneficial to shearing deformation.

The government troopses and then go on to quit to steer shearing to the steel from another side.

to decide the index value of structure plane shearing strength.

Our sheep are healthy and well cared for. I have collected a good amount of fleece during sheep shearing season.

This article introduces how to make the band saw sensor of measured shearing force and its structure.

At the same time, after shearing, the viscosity is lost; viscoelasticity and the ability of establishing flow resistance have decreased.

To make the edge of the male die and female die produce the shearing cranny to separate the sheet matal .

To the shearing season will be in each pasture to find employment.

Accordingly, it is important for us to improve the utilization of the stress shearing technique.

when slope ratio is 0. 6, shearing stress is close to the critical maximum.

He found a job of shearing wool from sheep.

When you suddenly when you turn, you will find for standing in the cliff top, their own shearing retreat.

Famed jazz pianist and composer George Shearing, 91, died Monday, February 14 of heart failure in New York City.

A subtle ridge on the edge of strip stainless steel resulting from cutting operations such as slitting, trimming, shearing, or blanking.

There is a diminishing difference in the shearing stress with rising pressure.

This method is based on random physical shearing of the recombinant vector.

The annual shearing is done in the spring to make the animals more comfortable for the summer months.

The higher the shearing rate is, the finer and more homogeneous the spherical grains are.

The safe electric scissors is for shearing leather and other thick matter.

Unit 15: Behavior (Bending, Shearing, Torsion) of Shell Beams.

The gold and silver deposits in the study area is located in the juncture of the NW and NE striking shearing zone.

In addition, the inner defect of the rolled material can also produce the formation of the shearing splitting.

Based on the above analysis, further discussion is carried out about the specimen size influence on this shearing angle range .

These processes utilize heat and thus differ from mechanical cutting processes such as sawing, shearing, blanking, etc.

In order to control the large amplitude vibration of cables of cable-stayed bridges, a viscous shearing damper is developed.

No place on earth was quite the hell a shearing shed was.

When drawing, shearing means to slant an image.

Adopt the strong wind, water shearing and the tunnel drying, which is quick and efficient.

The shearing angle is self-regulated by NC system to prevent distortion of workpiece due to shearing too short at the same time.

The crushing process is carried out by pressure and shearing stress.

The KRB Shearline represents the most advanced rebar shearing system in the world.

shearing the sheep shearing n.

Now I hear that it is sheep-shearing time.

Defines shearing and explains how to shear colors using a color matrix.

The farmer is shearing his sheep.

Guests are invited to enjoy a sheep shearing and fun with bush animals, such as the kiwi bird or the dancing pig.

Therefore, the retaining buttons can bear larger load so that they will not break or be damaged because of large shearing force.

Stan: It's shearing day. shear vt.

They'll be shearing next week.