SCSI bus

Generally, on a SCSI bus, only a few disks can be operated at maximum speed, although Ultra-wide and Ultra-2 buses can handle more.

Drives whose native transfer rate exceeds 50 percent of the SCSI bus speed must be on a dedicated SCSI bus to avoid loss in performance.

The work the BIOS did is mostly ignored; the operating system, once it loads a SCSI driver, will do its own scan of the SCSI bus.

In such a case, the SCSI bus will be the performance-limiting factor.

External disk arrays are not affected by failover clustering and can synchronize the cache correctly , even across a SCSI bus .

Ensure that SCSI bus termination is installed only at each end of the bus.

Number of tape devices that share a small computer system interface (SCSI) bus .

After the list is obtained, the cluster service attempts to scan all of the devices on the shared SCSI bus to find matching disk signatures.

The first three numbers for each item refer to SCSI bus, device ID, and LUN (Logical Unit Number), respectively.

Fibre connections are SCSI devices that are hosted on a Fibre Channel bus, instead of on a SCSI bus.

Thankfully, there is a patch available for 2. 4 kernels that causes the SCSI bus to be scanned on startup (see Resources for more details).

Never place a tape drive on the same SCSI bus as disks or a CD-ROM drive.

Many high-speed tape drives perform better if they have a dedicated SCSI bus for each tape drive used.

Anything on SCSI bus 0 can be shortened to 1, 0, leaving off the first 0.

when this error occurs , the scsi bus resets

In my case, the emulated FireWire SCSI bus in question is

Is the SCSI bus to be booted from, this is,