sheave

The direction of choosing material for tractive sheave and towline as well as resolutions to reduce frictional wear are put forward.

When the casting is unloaded, side parting and core pulling are required as a circle dovetail groove is around the rope sheave .

Process flexibility can be achieved through a simple and easy sheave change.

A line passes through the block around the sheave, the central turning wheel, and changes direction.

The steel wire rope was liable to be caught due to excessive play between the sheave and the cheeks.

A first stopping device is associated with at least one elevator sheave.

A second stopping device preferably is supported on an opposite side of the same sheave.

a plurality of sheave means for providing engagement means between said power source and said rotor means.

of the sowing by means of row sowing device with spiral sheave was lower than0. 505, which reached the demands of wheat sowing.

Bowsprit Topsail Yard: Shows the top of the bowsprit, shrouds, foot ropes, lift blocks, sheave hole.

The derrick man, positioned at the crown block, is to advise the driller when the snake is coming through the crown sheave.

A second shaft in the CVT contains the other stationary sheave and movable sheave also controlled hydraulically.

For automotive applications, a hydraulic actuator controls movement of the sheave.

Finally, power is transmitted to the rotor of the impact mill by a synchronous sprocketed belt, accommodated by a sprocketed drive sheave.

Next, reeve the 1 inch manila rope through the fast line sheave and pull back to the drawworks drum.

Why is shaft bearing needed for sheave? By what technical process?

Pull the 1 inch manila rope inside the derrick and feed and reeve through the first crown sheave.

Why does a crown block have one more sheave than the matching traveling block?

Reeve the 1 inch manila rope through the first crown sheave.

The secondary sheave rotation sensor (41) detects a rotational speed (54) of the output shaft (22d) and outputs to the control unit (9).

This is accomplished by locating on one shaft a stationary sheave and a movable sheave.

Manually turn sheave (10) until spring is tight, back off 3 turns, then latch.

Structure and theoretical analysis of a load equally dividing sheave

Dismantling technique of chimney slipform platform and hoisting sheave headframe by half- integral method

Serial lifting appliances; single and twin sheave bottom blocks for electric hoists; assembly

Using OOP technology to conduct the calculation for automatically selecting the type of head-sheave beam

Improvement on the Method of Sheave Wave Velocity to Value Liquefaction of the Saturated Soil

The horizontal arrangement of floor type frictional sheave mineshaft bunton

Analysis of kinetic and dynamic characteristics of pumping unit with crown sheave

Rolling of Big-Diameter Sheave Used in Haven Machine

Replacing Head Sheave Liner of Ground-mounted Multi-rope Friction Hoisting

Technical innovation of north shaft's hoisting sheave in Zaozhuang coal mine

Application of stacking stamping in manufacture of belt sheave

Way of drawing itself to replace the sheave wheels of headframe

Installation of console model multi-rope friction hoist's head sheave

Analysis of motion and force of inner grooved sheave in packing machinery

large sheave mounted on sealed ball bearings for high efficiency

The Parameterized Design for the Sheave Device with the Single-pin and the External Gear

Construction Technology for Sheave Chamber in Jilongshan Gold Mine

Dynamic Modeling of Moving the Rope on a Sheave

The spinning technology on V-type sheave of auto engine

Calculation of Force Acting on the Sheave Axial

Study on Row Sowing Device with Spiral Sheave

truck crane and wheel crane . sheave

Mobile cranes; Drum and sheave sizes

Sheave grooved for line size

Sheave O. D. of traveling block

fixed sheave of balancer and guyline