printed-circuit board

of integrated circuit packages that are mounted to a printed circuit board commonly referred to as motherboard.

PCB Designer is a cost effective, easy to use electronic printed circuit board PCB layout application.

A pair of wires connected to the printed circuit board connect the bridge rectifier to a power supply.

The guard is usually implemented with shielded relays and traces on a printed circuit board.

Failure of blind via is one of the main causes of an open circuit in printed circuit board(PCB).

The amplifier can be detached from a printed circuit board by means of the integrated plug strip .

The surface mounted technology is applied in the printed circuit board extensively.

and a thin and long cylindrical protective cover is fixedly arranged outside the printed circuit board of the probe in an insulation way.

Hardware circuit and printed circuit board of the electronic control unit ECU and internetworking ECU had been designed.

The main board, which is a printed circuit board known as a motherboard, is used to electrically connect these components together.

Disclosed are a multi-layer flexible printed circuit board and a method for manufacturing the same.

Conveyer belt component capable of high effectively mounting electronic element on the printed circuit board are provided.

The technical scheme can lead signals at all layers in the printed circuit board to be connected with each other.

The utility model relates to a water saving device, in particular to a water saving device used on a printed circuit board (PCB) line.

A display module mainly comprises a display panel, a printed circuit board and a flexible construction unit.

And the author presents the general procedure of printed circuit board design.

Finally, synthetical design between performance, reliability and testability of printed circuit board was demonstrated.

The light-emitting diode elements are electrically connected with the printed circuit board and are fixed on the printed circuit board.

The fancy piece of green woven glass and copper with SATA and power connectors called Printed Circuit Board or PCB.

The integrated circuit packages and printed circuit board are typically located within a protective chassis.

Printed circuit board (PCB) is an important part of modern electronic equipment, itsquality affects the performance of products.

LikeWoodward's 2301A line of controls, this control is housed in a sheet-metal chassis and consists of a single printed circuit board.

It includes wiring of printed circuit board, electric capacity coupling, tolerance of digital circuit noise, and transmission line.

Along with the developing of communications and electronical technicals, the printed circuit board are also quickly developed.

PCB surface is not clean, dusty attached to screen-cleaning screen, printed circuit board surface fully cleaned.

The requirements for high-frequency PCB (printed circuit board) and the limitation of the traditional PCB were summarized.

The manufacturing process and application of the printed circuit board paper are briefly introduced in this paper.

The paper studies this pin technology and covers the analysis of printed circuit board strain and process parameters optimization.

The application of master-slave numerical control system in printed circuit board NC drilling and milling machine is illuminated.

Complex image processing done by printed circuit board, circuit board testing system research and development.

CIMS is a measurement equipment designed to measure Characteristic Impedance of printed circuit board.

The paper presents the comparison of printed circuit board solder ability test results measured before and after cleaning.

Aspect Ratio: The ratio of the board thickness to the smallest-hole diameter of the printed circuit board.

The printed circuit board is positioned between the roller wheel and the lower cover in the casing.

High-voltage amplifiers are expensive and need considerable space on the PCB (printed-circuit board), however.

Output of the amplifier, the amplifier's power supply voltage, printed circuit board layout.

As the largest printed circuit board operation in China , the Group shall be the prime beneficiary of the global outsourcing trend .

Diagnose PCB's (Printed Circuit Board) problem position exactly and quickly and try to find the root cause.

Discussion on the Reform of the Course in "Design and Implementation for Printed Circuit Board"

the fineness of the non-metal powder of the printed circuit board is less than 400 meshes.

Finally the printed circuit board parasitic parameters are extracted by Finite integral theory(FIT).

The definitive illustrated guide to printed circuit board acceptability !

screen and the spacing between the printed circuit board is too big to adjust the grid spacing.

The invention discloses a printed circuit board assembly and manufacture method thereof.

Printed circuit board scrap is recognized as a challenge to disposal.

The first step of recycling Printed Circuit Board in Physical method is unsoldering the electronic component.

The fabrication procedure of two kinds of microwave multilayer printed circuit board filled with ceramic particles is briefly introduced.

The specific content of this paper is as follows: (1) A printed circuit board is designed and assembled.

printed circuit board in the electronics industry has occupied the position of absolute rule.

Method The modern Electronic Microelements is welded onto a printed circuit board.

This paper introduced a new copper treatment agent ST-10 for improving the adhesion of dry film to printed circuit board copper substrate.

Applies to fine lines, dot pattern, the manufacture of printed circuit board screen.

Suitable for desoldering single or double printed circuit board .

The platform and the resonant tank are further assembled on a printed circuit board.

the insulating basal body of the printed circuit board is a polyester film or a polyester thin board.

In addition, the chip is arranged on the flexible loader for connecting to the display panel and printed circuit board via signal lines.

instead of conductive In ba department of electronic components fuses, printed circuit board also tin.

Printed Circuit Board with Integrated Inductor.

adhering the plastic-encapsulated matter without thin film on the printed circuit board using the adhesive.

The new standard DIN 41612 has evolved into the most widely accepted standard for industrial printed-circuit board connectors in the world.

When processing, if the stable time is obtained, the drill can be moved on Z-axis direction, and can be cut into printed circuit board.

A small potentiometer (often for printed circuit board mounting) that is used for circuit balancing or fine adjustment.

The control consists of a single printed circuit board that is housed in a sheet metal enclosure.

Printed circuit board is designed following request.

The printed circuit board segment also posted strong sales growth .

The printed circuit (500) may be a flexible printed circuit or a printed circuit board.

It took about 4 hours to make the electronics without a printed circuit board, but by the time they finished, they knew how to solder!

Production, testing equipment, in a production of 100, 000 square meters of printed circuit board size.

Such UV images can be used for example in Rapid Prototyping, printed circuit board production and DNA analysis.

The printed circuit board comprises a radio frequency transceiving module.

According to the principle of PCB and the anti-interference measures, the printed circuit board(PCB) was designed.

As printed circuit board, we'll call it the rigid printed circuit board.

MB Main Board. Printed circuit board in the Main Unit.

a metallic screen is also designed to cover the printed circuit board partly.

The do-it-yourself kit contained a blank printed circuit board, a collection of parts and 16 pages of insructions.

Be suitable in the field of connector, printed circuit board and semiconductor.

The printed circuit board is made by Foxconn Advanced Technology.

Printed circuit board in the cold.

SOLDERHOME is the industry's largest, most professional business website in china's printed circuit board assembly industry.

A motherboard is the central printed circuit board (PCB) in some complex electronic systems, such as modern personal computers.

It is suitable, in particular, for the accelerated treatment of structures as are found, for example, in printed-circuit-board technology.

According to the Moore's law, it becomes more and more complex to design high-speed and high-density Printed Circuit Board (PCB).

Based on the avalanche effect, a kind of kilo-volt nanosecond pulsers has been designed, by using microwave PCB (printed circuit board).

The smart module (22) has a module connector section (32) that is electronically coupled to the module printed circuit board (38).

Environment Protective Materials and Techniques Used for Printed Circuit Board

A printed circuit board is disclosed. The printed circuit board comprises a substrate having a first surface and a second surface;

Study on the Laminating Process and Property of Modifide Epoxy Matrix Printed Circuit Board Used for High Frequency Transmission

Fast Capacitance Extraction and the Concept of Equivalent Permittivity on Printed Circuit Board

The sensor comprises a cavity body fixed on a printed circuit board (PCB) and a cavity cover matched with the cavity body;

After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling

Research on the preparation and properties of a three-layer polyimide film adhesive for flexible printed circuit board

The radiating antenna units comprise two slot antenna units which are positioned at the back face of the printed circuit board;

second, integrated circuit blocks are dismantled from a panel board and a printed circuit board;

Study of a new rhodium plating process for printed circuit board

an oil level signal output contact is arranged at the top part of the printed circuit board of the probe;

the baseplate and the lower layer printed circuit board are electrically connected with and propped against each other through a lead wire;

Experimental Study of Gold Leaching from Printed Circuit Board Scrap with Thiosulfate

Furthermore, an insulating material layer is provided and is configured to cover the printed circuit board partly;

Treatment technology of the wastewater reuse treatment system for the printed circuit board industry

One side has printed circuit known as single-sided double-sided printed circuit board;

Recent Advances in Thermosetting Polyimide and Its Applications in Printed Circuit Board

Anti-Interference Measure and Electromagnetic Compatibility for Printed Circuit Board Designing

Advances in Research on Low CTE Polyimides Used in Flexible Printed Circuit Board Applications

Galvanic current method for measuring electrodeposition velocity of immersion silver plating for printed circuit board

printing a chip circuit on the printed circuit board to connect lamp bulbs and a power cord;

The analysis of the plating defect of plated through hole of the multilayer printed circuit board and countermeasure

Electromagnetic Compatibility Prediction on Printed Circuit Board

Information Automatic Gaining of Soldered Joint on Surface Mounting Technology Printed Circuit Board

Sectional Requirements for Specific Printed Circuit Board Assembly Equipment

Hole Metallization in Printed Circuit Board and Potential for Technological Improvements

A single side of a printed circuit, we call single-sided double-sided printed circuit board;

Study on Processing Technology of Step Designed Planar Buried Resistor PTFE Multilayer Printed Circuit Board

Research of electroplating waste water from multilayer printed circuit board processing

Printed Circuit Board Design and ElectroMagnetic Compatibility

Reference of the practical printed circuit board manufacture process of practicality

Mode Analysis and Antivibration Design of the Printed Circuit Board in Electronic-cabinet Box

Control and treatment of electroplating waste water from double faced printed circuit board processing

Research and application of one kind of CNC drilling machine with double main shafts and six spindles for printed circuit board

Experimental Research on Cutting Force in Process of High- speed Milling of the Microwave Printed Circuit Board

The Study of Anti-Interference Measure and Electromagnetic Compatibility for Printed Circuit Board Designing

Immersion Plating and its Applications to Printed Circuit Board

Study on the Fabrication of the Multilayer Microwave Network Printed Circuit Board

Crushing performance and resource characteristic of printed circuit board scrap

Study on the Processing Technology of the Ceramic Microwave Printed Circuit Board

Research of Multilayer Printed Circuit Board Design and Manufacture Technology

Discuss About the Process Quality Control Technology of Plated Through Hole of the Multilayer Printed Circuit Board

Digital Exposure System for Printed Circuit Board Manufacturing Industry

Tin Plating Protective Technology in Production of Multilayer Printed Circuit Board

Solder Coat Protective Technology in Production of Multilayer Printed Circuit Board

A production method of a semi-flexible printed circuit board comprises the following steps of: (1) preparing a sheet metal;

Installation Process and Requirement of the Printed Circuit Board

Study on Laser Boring through a Glass Made Printed Circuit Board

Printed Circuit Board Designing and the Technology of Anti-Interference in the Single Chip Microcomputer System

The Calculation of Impedances in Coreless Printed Circuit Board Transformers

The Research and Application about Image Transfer Process of the Fine-line Printed Circuit Board

Printed Circuit Board Connectors: Overview of Spring Clamp Technology

Numerical Simulation of Propulsive Force in Steam Laser Cleaning of Printed Circuit Board

EMC analysis for the edge placement of differential lines on the printed circuit board

Research on Copper Extraction from Printed Circuit Board Leaching Solution

Feeder Assignment Problem of Placement Machine Assembling Printed Circuit Board

Maintenance examples of the printed circuit board of downhole tools

Recycling of printed circuit board scrap by electrostatic separation

High-tension electrostatic separation of printed circuit board scrap

The status of technology and research of mechanical recycling of printed circuit board scrap

Study on the Process Technology of the Special Printed Circuit Board of the Radar Production

Multipurpose Utilization and Resource of Printed Circuit Board

New method to calculate the inductance of coreless transformer in printed circuit board

Process Control of Automatic Production Line of Copper Electroless Plating on Printed Circuit Board

The Technology of Laminating of Multilayer Printed Circuit Board and the Methods of Decreasing the Warp

Research on Intelligent Printed Circuit Board Testing Machine

Printed circuit board manufacturing factory

The inspecting standard of printed circuit board divided into three classes below

Restrain and analysis to the transmitting effect about the design of high-speed printed circuit board

Effect of Cu Surface Finishes of Printed Circuit Board on the Microstructure of Lead - Free Solder Joint

Optimizing of Test Strategies for Printed Circuit Board Production

Available in straight and right angle plugs and printed circuit board connectors

Inspection and Produce of the Project Datum of Printed Circuit Board

Screening of Quaternion Additive for Electroless Nickel Plating of Printed Circuit Board by Orthogonal Test

A Review on Optimization Problems of Printed Circuit Board Assembly Systems

An experimental research on pyrolysis of printed circuit board backing

Study on the Causation of Having No Copper in the Holes of the Printed Circuit Board

Pressing Quality Analysis for the Printed Circuit Board

Technology of Printed Circuit Board Maintenance for Radar of Military

Crosstalk Suppression of High-Speed Printed Circuit Board Design

the design of schematic circuit and printed circuit board is completed with protel

The application of multi-layer printed circuit board techniques in VXI bus back-plane

Stripping Method of the Metals Coating for Printed Circuit Board

Rhodium Electroplating of Printed Circuit Board

Sulfamate Nickel Plating Process for Printed Circuit Board

Printed Circuit Board Design Techniques For EMC Compliance

Application of Pulse Power Source in Copper Plating on Printed Circuit Board

Research Progress of Liquid UV Photo-imageable Ink for Printed Circuit Board

secondly, utilizing the base material of printed circuit board to make the packaging element;

infrared fault diagnosis tester for printed circuit board

Acidic Copper Plating Technology of Printed Circuit Board

Research and Implement of Printed Circuit Board Edge Detection

Recovery and Disposal of Epoxy Resin Contained in Printed Circuit Board

Quality Control of Printed Circuit Board Assemblies by Non-ODS Cleaning

Development of a LTR-1 Type Thermosetting Solder Resist Ink for Printed Circuit Board

Mechanical Recycling of Printed Circuit Board Scrap

Modeling and Analysis of Vertical Vias in High Speed Printed Circuit Board

Design of Grounding Connections in Printed Circuit Board

The Status of Recycling Technology of Printed Circuit Board Scrap

The design and study in printed circuit board and anti-jamming technology

Detection of Braze Welding Defects on Printed Circuit Board by the Use of Laser Hologram

Test Platform Design of Printed Circuit Board of Gyrocompass

pcb printed circuit board assembly robots - safety

Design technique of the printed circuit board

Classification of printed circuit board

Study on copper leaching from printed circuit board by Thiobacillus ferrooxidans

The Interference on the Printed Circuit Board and Method of Suppression

Technique of anti-interference in the design of printed circuit board

Disposal for the printed circuit board control

etch - resist screen printing ink for printed circuit board

Technology of Through Hole Plating of Printed Circuit Board

PCB PRINTED CIRCUIT BOARD BACKPLANE RESISTER

Key Points in Design of Printed Circuit Board for High Speed Digital System

The Method of Obtaining Copper Coil Area of Printed Circuit Board by Film Scanning

An Algorithm For Detecting Components of the Printed Circuit Board Based on Region-Growing

Research on Recycling Process and Method of Printed Circuit Board

Design Techniques of High-Speed Printed Circuit Board

Effects on Elaborate Etching of Printed Circuit Board

Rigid-Flex Printed Circuit Board Technology

The Process Control of Heavy Copper Cladding Printed Circuit Board

Elementary Introduction to Printed Circuit Board

Test Method Study on Printed Circuit Board Cleanness

Technology of Recovery and Reutilization of Waste Printed Circuit Board

Inquire into designing method of printed circuit board

Soldering repair of Printed Circuit board (PCB)

Conductive Paste for Printed Circuit Board

The Modelling of Printed Circuit Board with PCB Data in UG Platform

The Design and Manufactory of Printed Circuit Board

The Severe Future for the Printed Circuit Board

The Plating Copper's Craftwork of Printed Circuit Board

Fast prototype Printed Circuit Board

Study on Printed Circuit Board Reliability under Vibration Stress Based on Modal Analysis

Algorithm based on computer processing for drill hole inspection of printed circuit board

Questions about the designing of printed circuit board

Technical Development of Printed Circuit Board Paper

The Technology Trend of Printed Circuit Board

Online fault diagnosis system for Printed circuit board based on fault dictionary method

SMB: Surface Mount Printed Circuit Board

PCBA Printed Circuit Board Assembly

Anti-jamming Design of Printed Circuit Board

Solder-Resist Inks for Printed Circuit Board

Laser Microvia Process of Printed Circuit Board

Design of the Printed Circuit Board of the One-chip Computer

Research on Reuse of Waste Printed Circuit Board

Study on Direct Plating of Printed Circuit Board

the cathode lead wire (109) has an installing surface (110) connected with the printed circuit board;

in-circuit testing of printed circuit board

Study on Improving CTI of Printed Circuit Board

Fault Diagnosis System Based on VXI Instrumentals for Printed Circuit Board

Study on printed-circuit board in passive DMFC

Post header for printed circuit board

The Problem of Design of High-Speed Printed Circuit Board

Reuse of Wasted Printed Circuit Board Based on Circular Economy Concept

Design of Printed Circuit Board

Study on Maintenance Test System of Printed Circuit Board Based on EDA Technology

Inspection of missing electronic component on Printed Circuit Board based on IMAQ

Development of fault diagnosis system for printed circuit board based on VXI bus

A cavity resonator (100) according to the invention comprises a printed circuit-board (10);