relative error

Simulations show that this way can eliminate the initial value's influence, and the relative error of distance is less than 2%.

The relative error of the averaged discharge coefficient and uncertainty and the additional uncertainty are the main evaluating criteria.

Thirdly, the least-square method based on relative error is proposed and used to fit the calibration curve of the ultrasonic sensors.

The relative error of the spectral prediction models of the nicotine contents by the step regression method are commonly less than 10%.

The design of the instrument is compact, the accuracy of measurement is high, relative error of the system is less than 0. 5%.

The relative error between the two specimens which were cut off from the same thermal insulating brick is less than 3%.

The trial result in Daqing oilfield shows that the measuring relative error of the new six-electrode probe is less than 5%.

Scatter diagrams and the statistical criteria of relative error and mean square deviation were used to evaluate this model.

The calculating results show that the analytical and numerical results have great consistency, and the maximum relative error is only 4. 5%.

The results show that the model generally had a good effect and high precision, and its average relative error was only 0. 086%.

Simulation results show that the mean relative error of the soft sensing method is less than 0. 7% and can meet the practical demands.

The accuracy and relative error are computed by means of exact method as control group.

The experimental results show that the runtime of our proposed method is fast and the relative error is acceptable.

The relative error between the two wave velocities obtained by the kinematic model and the direct observation is about 5%.

Relative error of hydrogen flame ionized detector is less than 10%. Therefore, this method is fast, easy and accurate.

The relative error of the vane interference was less than 2 %, which meets actual requirements.

The calculating formula for the measuring relative error of standard addition method of ion selective electrode was obtained.

The model of ECT sensor was built, and the relative error of the capacitance model was analyzed by finite element method (FEM) simulation.

The weight differences among particles with different noises are not emphasized, which may bring large relative error in the calculation.

The experimental result shows that the obtained mass transfer equation is acceptable and effective, with relative error under 10%.

Often what you should test is the relative error in terms of ULPs.

With the increase of transfer factor of laser driver current and laser frequency, the relative error will increase.

Relative error is around 14% comparing with measured data, so the feasibility of the quantitative method is confirmed.

The method has been applied to determines Si, P and As in carbon steel. The relative error is less than 8%.

Compared with the numerical solution, the relative error are less than 3%.

A method for evaluation of uncertainty was established with standard deviation of relative error.

The relative error between the predicted value from BP network and observed value was lower than 4%.

Relative error values and averages obtained with present correction program on 121 light element analyses(B. O. F) in their compounds.

Comparing the theory result with the home-made experiment, the relative error of period is less than 0. 7%.

High reliability of the technique is proved by experiments with a relative error of 0. 07%.

The results of experiments indicate; the relative error is smaller, so the model is validated.

A series of example are given for comparison and analysis the relative error between approximate formula and this formula.

It is validated by filed application in which the relative error is less than 2%.

The simulation example shows the most generalized relative error is 5. 611%. The predicted value is near the actual output.

Based on the statistics of a large sample of data, the Boltzmann constant is determined at a relative error of 4%.

The results of static prediction show that the maximum relative error of predict result and the empirical data is 3%.

Also the process of the neural network is designed and the relative error between neural network and FEM is defined.

The experiment results of field drip irrigation cotton under mulch showed the relative error of the model was about 10%.

The average relative error is superior to the traditional Kalman filter.

The average relative error predicted 151. 36%, when the average relative error trained by the model is less than 5%.

Unbiased estimation of flow size, the upper bound of relative error and the time and space complexity are deduced theoretically.

The average relative error of gas holdup of the riser between calculated values and experimental values was 6. 429%.

The relative error of the initial volume of cavity is about 4. 23 %, which indicates the model is effective and reasonable.

The influence of multiple scattering on the relative error of transmittance is discussed. 5.

It shows the average relative error of the simulation method is about 5%.

Under different conditions, the error precision estimates vary, and the mean relative error in the range of roughly between 30% -80%. 2.

The converted axial strain of FBG accords with MTS displacement gauge with the relative error 3. 2%.

Relative error to analyse is 0. 2%, settled accuracy and reappear in measuring sodium carbonate.

For these constituents retrieval, correlation coefficient values are over 0. 88 and average relative error values are under 40%.

Relative error of parameters calculated by SRSD is below to 20%.

The correction factor is nearly equal to the true value (numerical solution), the average relative error of 66 data is 0. 04%.

the predicted average relative error of all monitoring points is 1.

That's very small-- that's what we call the relative error.

The maximum relative error is 2.

At the end of the paper, an example based on the method was provided, the relative error of flow and location is 0. 14% and 0. 17%.

62 with the minimum relative error 1.

In order to get my relative error down, I will oscillate ten times.

A New Method for Relative Error Rate Analysis Among the Monitoring Devices of Vehicle Operation Estate

Evaluation of uncertainty of the indication relative error for a diaphragm gas meter

The Relative Error in Single Weighing of an Electronic Proportioning Scale

Relative Error Criteria and Optimal Estimation of Order Statistic Filters

Predication Model Error Analysis: Relative Error and Absolute Error

Calculation the Relative Error of Determination in Mixed Acid(OR BASE)

The experiment results indicated, the simulation calibration parameters relative error is smaller than 0. 25%;

relative error of the frequency

Grey Combination Forecast Models Based on Relative Error Minimize

Relative error of the period

The BP Algorithm Based on the Square Sum of the Relative Error

Least square method that based on relative error