piping

"There was no damaged piping in the Fukushima Daiichi nuclear power plant, as claimed in the article, " he said.

As for myself, I see obvious improvement in my piping and frosting, and that's all that matters to me in this stage!

however, plastic piping is less expensive and is often used in the systems that produce feed water for the distillation unit.

The installation of expansion oil pipe of inner floating roof tank oil piping is different with that of dome roof tank oil piping.

Piping all of the channels in series is often the best solution.

Don't be afraid to exercise some resourcefulness and find the answers to your questions on your own before piping up for yourself.

The method used to control pulsations to a level acceptable for the piping system shall be elaborated by the bidder.

The utility model can be widely used for the liquid pollution discharge of the piping system.

There is no scientific term for what happened in Guatemala, he said, adding that he recommends the pit be dubbed a piping feature.

Arrangements of slop tanks and deoiling tanks and associated piping systems.

Select a location near the center of the water piping system. It must be installed indoors and in a vertical position on a level surface.

I felt matchless joviality excited by the rolling speed and the piping alt tone, and was unwilling to be back to the ground!

Suppose that we wish to estimate the total cost to complete piping construction activities on a project.

The children would sing in piping Spanish, high-pitched and pure; they would sing "Nearer My God to Thee" in Quechua, very fast.

Nominal Pipe Size (NPS) is a set of standard pipe sizes used for pressure piping in North America.

Piping as a safety, economical, reliable transportation, have been widely used in the transportation of petroleum, chemical etc.

DO NOT USE ADAPTERS! Use piping and equipment designed to withstand pressures to be encountered.

If the strength calculation of piping components is to be made, the allowable stresses of the piping materials shall be determined fist.

Contractor shall make arrangements for code inspection on field and shop fabricated piping by an authorized inspection agency.

Execute the piping design task and issue all the necessary basic and detail files for projects of the company.

All piping and tubing shall be blown out with clean dry air before it is connected to the equipment.

One of the effective solutions to the suppression of noise radiation from the water piping system is to install silencers .

The company forms part of an industrial group that also produces water heaters and PVC piping.

Pipework, with the exception of plastic piping, quantities have been converted into tons and are shown in the BOQ's.

The main component is a stand-alone chiller unit that must be connected by piping to a pump and a separate reservoir in order to function.

This paper describes different hydraulic characteristics of piping of gas gathering station, compared to one of long distance gas pipeline.

be a capable fitter able to plumb hoses and piping in a neat and professional manner.

DO NOT use with piping that has been treated with chromates, boiler seal, or other chemicals.

Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.

plastics piping and ducting systems . thermoplastics pipes . test method for resistance to external blows by the round - the - clock method.

A combination of sub-stations, transformers, towers, cables, and piping are used to maintain a constant flow of electricity.

Guidance on the classification and design of plastics piping systems used for renovation.

The children danced to the music that the pipers were piping .

The results showed the existence of the flaw would not effected the safe operation of the piping.

Open piping attached to a filled tank will not start to drip-leak following installation and test of a Chemtrol Tru-Bloc shut-off valve.

mary alice : ( v . o ) gabrielle liked her paella piping hot . however , her relationship with her husband was considerably cooler.

Piping vibrations in reciprocating compressors should not be underestimated in design, installation and application.

Especially for the tough, ductile materials used in nuclear plant piping , ordinary plastic collapse analyses will possibly suffice.

The miles of conduit, piping and air ducts remind Reeves of the missile frigate he served on as an electrician during the Vietnam War.

Injection of corrosion inhibitor can control various corrosion occurring within piping and processing equipment on an offshore platform.

As a general rule, piping flanges should be concentric to pump nozzles to within the flange bolt hole clearance tolerance.

Normally, an increase in noise, or "worker piping, " is used as a signal for bees to leave their hives.

Valves not forming part of a piping system shall not be permitted in watertight subdivision bulkheads.

The distribution piping between the panel and point of use should be double-wall piping with monitoring of the annular space.

It is one of the most extensive methods to install water mufflers in water piping system to attenuate the fluid pressure pulse and noise.

Steel tubes. Welded tubes intended to be coated or protected for use in water piping systems. Dimensions. Technical delivery conditions.

The other flange of the piping is kept free and is set to the tray's flange with a temporary blind.

plastics piping systems . thermoplastics valves . test method for the integrity of a valve after an external blow.

To human body, essence of the meridian system like a piping system in which abstract material cycle.

Convenient bolt holes are in the bottom of the valves for securing them to piping supports .

Piping layout, the pump on both sides to do at least one side of maintenance.

By way of comparison, at the beginning of 2008 the ratio that had farmers piping old-time love songs into the sty was above 10.

generic provides complex piping material and metal piping used in supply system with high cleanliness , good quality and easy installation.

It is at the diameter direction of piping to the Die board setup that clips Die valve.

Lunch and dinner typically include piping hot rice, two vegetables and a spicy lentil dish called sambar, and buttermilk.

Piping installation: can set after the installation, together will also be our tubes opened longitudinally garnish with glue, glue into.

Evaluation of high temperature tensile and creep properties of light water reactor coolant piping materials for severe accident analyses.

The power gains were achieved through an updated ECU, a sports exhaust system, new intercooler piping and a high-flow catalytic converter.

Hydraulic Piping Has Never Been Installed As Fast!

We are not allowed to pump the air into this piping, otherwise the inside meters and components will be damaged.

In addition, in order to find leaks in tubing, piping, vessels and equipment, hydraulic pressure (usually with water) is often used.

if the indoor installation area is subject to freezing temperatures , the water piping must be protected by insulation.

Explores the location of pressure difference control points in variable flow rate systems with a hot water heating piping model.

The discharge elbow shall be designed to carry the full weight of the pump, motor and discharge piping.

Below is a list and description of those standards most typically applied to industrial plastic piping.

Be responsible for the inspection of piping cutting, prefabrication, trays production, valve installation and section installation.

Due to the flexibly and randomness of piping , the mechanism of penetration deformation is in great dispute.

All piping (connected with orbital welding), clamp connections, diaphragm valves, sanitary pumps used in the whole plant is in AISI 316L.

Sleeves cuff, with vertical dividing seam and slit at back of sleeve, to be closed by one button and piping button holes.

Pipeline simulation technology and its development prospect and the piping system movement adjustment and the control are introduced.

SHIPBUILDING. FLEXIBLE PIPING. GENERAL TABLE. DIAMETERS. MATERIALS. TYPES OF JOINT. APPLICATIONS. PRESSURES.

plastics piping systems . glass - reinforced thermosetting plastics pipes . determination of initial specific ring stiffness.

It was also noted that a number of sections of chilled water piping requires lagging to avoid condensation and associated water formation.

All piping and fittings must be suitable for use with potable water and meet the requirements of local codes.

Materials of construction for the piping and distribution systems must be resistant to corrosion and should minimize contamination [28].

Piping, repeat business, consumption, whether to have the sentiment, steady income products.

Flexibility design method of large scale hot oil pump inlet piping is expounded as well as the layout of pipeline, support and hanger.

The formulas can easily by used to calculate the stability of levee and find out the risk of piping erosion.

Any special Notes you deem necessary can be included on start-up and shut down lines, piping configurations etc.

Disconnect water piping connections to the cold water inlet and the hot water outlet. Disengage the heater from the wall bracket.

The installation completeness and tightness of the piping have been inspected already. Here's the survey report.

Piping design should follow similar codes, as issued by the American National Standards Institute (ANSI).

The provisions of this Chapter apply to piping and ventilating system on all types of ships except where otherwise stated.

Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.

What is the type of material used for the storage tank and piping after the final purification step?

There is nothing as good as a cup of piping hot cocoa on a cold winter 's evening .

IMPORTANT: Removal and replacement of the heating element involves the disconnection of water piping connections and electrical connections.

plastics piping systems . fittings , valves and ancillaries . determination of gaseous flow rate pressure drop relationships.

Effect of microstructure on failure behavior of light water reactor coolant piping. under severe accident conditions.

For alloy steel piping system, the liquid temperature shall be higher than the brittle transition temperature of the metal material.

Piping was too enjoyable, as he had discovered in the Boys' Brigade band and all through his short army career.

Hereby newly city plastic underground drainpipe has far-ranging application value and can completely substitute traditional piping material.

It has become to a professional piping enterprise which owes a larger scale and the most complete product ranges in this industry.

Piping at the top periodically releases water mixed with fertilizer, dampening the felt and nourishing the plants.

Support is an important part of piping system, the support concept(position and function of supports) is important to the piping design.

Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.

There is nothing as good as a piping hot cup of cocoa on a cold winter's evening.

The trap remains closed until the steam cools and condenses into water. The bellows retracts to allow the water into the return piping.

FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES, SOCKET SERIE. TECHNICAL SPECIFICATION.

Status Offline Check the alignment of the pump after disturbing the piping connected to the pump, e. g. , after cleaning the suction screen.

Carefully clear inlet piping system of foreign matter and mount regulator with the flow arrow pointing in the direction of flow.

Hot Water Temperature Control Valve shall be installed on water heating equipment to provide tempered water to supply piping.

Unfortunately, several problems due to piping layout, do limit the soundproofing effectiveness of said coatings.

Some sizes suitable for horizontal or vertical up positions - Simplifies piping design , eliminates constraints that swing checks create .

Install below and close to equipment being drained, avoid long lengths of horizontal piping ahead of trap.

Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.

Excess ozone production wastes energy, can accelerate corrosion and result in excessive off gassing in the area of the distribution piping.

The seismic analysis for reactor coolant piping (RCP) primary loop is one of the very important work in design of nuclear power plants.

Piping and valves should be tagged and easily identifiable by the operator performing the cleaning function.

A section of manifold containing the valves and piping necessary to bleed off pressure from a vessel or system.

The rotary compensator is a new type of compensator, mainly used in the compensation of elevated steam and hot water piping.

below liquefied hydrogen piping, from which liquid air may drip, shall be constructed of noncombustible materials.

The allowable stress is the value of the determined basic allowable stress of the piping material multiplied by a quality factor.

For piping system needing special cleaning, the special technical specifications shall be followed.

Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.

We've got ideas that flow directly to solutions for your industrial piping applications.

The complex interactions between water and soil in the process of piping proves that the piping develops and changes with the time.

Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives.

While Mike and I were waiting for our food, this clumsy waiter spilled a bowl of piping hot soup on Mike's back.

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.

In a piping but determined voice she ordered me to sit down . . .

Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.

Easy, because you already think in terms of running commands, CPing files, and piping and redirecting output.

Piping must be sloped to ensure proper drainage of water, and sufficient pressure must be supplied to maintain turbulent flow [28].

The pipe supports surrounding the valve must be loose and the adjoining piping must be well aligned with the valve.

This specification covers the minimum requirements for field pressure testing of piping, fired heater tube assemblies and exchangers.

Cap and insulating plug provide a vapor seal to prevent exchange of air, to maximize the efficiency of your insulated piping system.

The utility model relates to a magnetic filter which is used for the piping system to discharge the pollution.

The gaseous hydrogen storage vessels and associated piping shall be electrically bonded and grounded.

Use piping and equipment designed to withstand pressures to be encountered.

A variety of seabirds and shorebirds inhabit the islands, including the endangered brown pelican, least tern, and piping plover.

Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.

The basic transformation of piping prefabrication from factory-fixed to field mobile can be realized by developing and using the equipment.

Comparison results show that the proposed method is correct and effective; the data of connecting nodes of piping design is reliable.

Use piping and equipment designed to withstand the pressures to be encountered.

A very important consideration in Copper Piping is the selection of the proper bonding medium.

Plastics. Plastics piping system for civil engineering subsoil drainage. Specification.

This tilting disc check valve is designed for high piping velocities, turbulence flow, quick and quiet closing preventing "water hammer" .

A basic-but-common grep usage error involves piping the output of cat to grep to search the contents of a single file.

Based on the test data of the steam piping network heat loss, along with the calculation, got the heat loss of each piping network sections.

The steam passes through the supply piping to heat distribution units ( radiators ) where it condenses and gives off heat.

On gas withdrawal systems, use a check valve or other protective apparatus in any line or piping from the container to prevent reverse flow.

Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.

ships and marine technology . identification colours for the content of piping systems . main colours and media.

The proposed method can provide a reference value for calculating piping supports maximum span distance for other nuclear plant systems.

SHIPBUILDING. FLEXIBLE PIPING. RING COUPLINGS FOR FLEXIBLE PIPES AND FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.

Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms.

Cause of air amount delivering apportion of air condition piping system inadequate to a bus is analyzed.

Commissioning and trouble shooting for the piping system and valve assembly of the equipment.

Preparation of general arrangement and foundation load drawings, piping plans, isometric drawings, etc.

Internal parts can be removed, repaired or inspected without removing the valve from the piping.

The allowable stress of the pipe material shall be chosen from the data of GB 50316 Design Specification for Industrial Metal Piping.

A reversal of normal flow in the system caused by a negative pressure (vacuum or partial vacuum) in the supply piping.

SHIPBUILDING. FLEXIBLE PIPING. STRAIGHT FILLING NECKS FOR LOADING PETROLEUM PRODUCTS.

Fix the pump firmly on a flat foundation. No sharp turns in piping. Arrange valve handles in positions convenient for operator.

The jam of pipelines will lower the efficiency of the piping system seriously, even will result in the damage of the piping system.

Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.

SHIPBUILDING. FLEXIBLE PIPING. METHODS OF CONNECTING TO SHIPBOARD PIPELINES. GENERAL TABLE.

Nevertheless, I'd like to suggest some other quotes for Starbucks cups in the hopes that they, too, may stimulate piping-hot conversations.

The electronic evaluator is set at the Schmid works with the K-factor (contingent on piping material, diameter, etc. ).

The method to increase the flexibility of the piping but not to increase the pressure drop in the piping was, then. introduced.

An inverted "U" shaped section of rigid piping normally used as a conduit for high-pressure drilling fluid.

Check for leaks around piping connections. Any leaks must be fixed immediately.

Piping leakage, piping, sprinkler, hose reel, wet risers, leakage due to structural defects.

Piping and valves, foundation bolts and nuts, platform. footpath, painting, cables, and special tools and standard tools.

The unit to base electrical plug permits instant valve unit replacement without disconnecting piping or wiring. more. . .

Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.

Piping to and from the equipment must be laid so that they cannot be damaged.

Biotechnology - Performance criteria for piping and instrumentation - Part 1 : general performance criteria.

Separate bolted on cooling jackets or externally mounted cooling fluid piping are specifically prohibited.

Parts in contact with liquid in pipe are of brass and beryllium copper. Flow switch installs in tee in horizontal or vertical piping.

By the analysis and measures above, it improves the test quality of the process piping butt weld effectively.

SHIPBUILDING. FLEXIBLE PIPING. REDUCING NECKS FOR LOADING PETROLEUM PRODUCTS.

Supply piping must be flushed clean before making connections to the valve.

Standards most frequently referenced in plastic piping specifications are ASTM Standards.

The shrinkage defects include primary piping, secondary piping, and centreline shrinkage.

Superstructure fire fighting piping (including emergency fire fighting piping) to be done air-tightness test.

our specialties are supply equipment , tanks , instrumentations , control system , piping and design for petrochemical product use.

Knowledge of designing, government approvals applying, QA & QC experience, civil engineering, equipment installation and piping.

Engine Room, Piping System Decoration, Automation Collision Avoidance.

The calculation result proves that the design project can assure pressure piping work safely under the operating temperature and pressure.

Mechanical Shaft Seal: The mechanical shaft seal permits leak less operation thereby eliminating the need for drip piping.

Chart will also engineer and manufacture special piping systems for specific customer applications.

This allows each valve to be mounted directly to an actuator without the use of hard piping or tubing.

Biotechnology - Performance criteria for piping and instrumentation - Part 3 : sampling and inoculation devices.

This document covers requirements for the identification of piping materials.

Proper valve selection is essential for a well-designed piping system.

Hydraulic lift is not including: Caissons, cylinders and buried piping change.

Nylon is the best material for piping bags as it wears well and is easy to wash.

But it would also have outlets that could divert that flow, if need be, into undersea piping.

Check Machine lists and diagnose of the piping system during plant transfer and new machine connecting s.

Be responsible for the inspection of piping welding and examining the welders' certificate.

Discussion of Several Problems in Execution of "In- use Industrial Piping Periodical Inspection Rules"

Typical domestic gas appliances, some attached to the interior piping , were located in several houses.

After sweeping, the qualified piping system shall be restored in time; records of sweeping shall be duly filled out.

Drain piping may require to be protected against freezing.

Shijiazhuang ShenTong Plastic Industry Co. Ltd is a enterprise concentrating manufacturing&sales. We specilize in new plastic piping.

Flow can be blocked at this port while adjacent piping is disconnected for repair or alteration.

Preparation of piping and instrumentation diagrams in cooperation with the process engineer .

Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.

Two high school students showed off their Lego machine, which can count and wrap coins with the help of piping, steel and wire.

These include: oil tank stress, scheduling stress oil tank, piping system pressure drop ( pressure loss).

I-Run is a simple to use, stand alone application for the creation of piping system isometrics.

Used to connect piping of different dimensions.

CONVENTIONAL COLOURS FOR PIPING. TABLE OF BASIC PIGMENTS FOR USE IN THE PRODUCTION OF CONVENTIONAL COLOURS FOR PIPING.

This system includes fuel oil tank, fuel oil pump, fuel oil hand pump, auxiliary engine daily service tank, piping and valves.

Where piping is insulated, ball valves shall be equipped with 2 " extended handles of non-thermal conductive material. "

any of numerous usually small wading birds having a slender bill and piping call; closely related to the plovers.

Biotechnology - Performance criteria for piping and instrumentation - Part 6 : equipment probes.

SHIPBUILDING. SEA WATER PIPING SYSTEMS. MEASURES FOR CORROSION REDUCTION.

In this article, the normal administration of process piping and the application in chemical plants were introduced in detail.

METALLURGICAL PRODUCTS FOR RAILWAY PURPOSES. PIPING CLAMPING FLANGES WITH TWO HOLES.

Piping systems shall be all welded. Flanges shall not be used except as specifically shown on the drawings.

Biotechnology - Performance criteria for piping and instrumentation - Part 2 : couplings.

The deal showed that the commercial-property market remains piping hot, even as housing shivers.

PIPING : A strip steel condition appearing as an overlap on the steel surface; this is an undesirable defect.

DTU 60. 33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.

Analysis of the Reason and Avoid Measure About Primary Air Piping Jam of the Boiler Burning System .

Combination carriers handling oil cargoes have their own cargo pumps, piping systems, etc. , for discharging oil.

The design of this valve is of flange connection. Insert its relief piping directly into the mud pool, and make bent as less as possible.

Feed Water Piping, Main Steam Piping, Reheating Steam Piping (Hot), Reheating Steam Piping (Cold).

Where winters are short or mild, piping this water for use in district-heating schemes is prohibitively expensive.

The method described above is applied in simulating piping phenomenon, and the results were valid and satisfactory.

Connect piping system to water mains, supply tanks, pumps, compressors and control equipment.

cooling water system includes cooling water pump, cooling tower, cooling water piping and valves, etc.

PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).

ships and marine technology - drainage systems on ships and marine structures - part 3 : sanitary drainage , drain piping for vacuum system.

Chlorinated Polyvinyl Chloride (CPVC) hot & cold water piping system is a new and ideal choice nowadays.

The piping welded system in the absorber plate assuring more efficient and effective heat conductivity.

The refrigerant, refrigeration oil and an evaporator, condenser and piping in the drying process is very important.

One FP senses impending freeze-up and opens to allow bleed flow to protect piping and equipment.

Determination of micro-mechanical parameters of primary heat transport piping material of pressurised heavy water reactor.

There are occasions where the phase separator utilizes triaxial piping to deliver the liquid nitrogen to the user device.

OBJECTIVE: To test and verify the piping cleaning effect in infusion solution productive process.

The sewer system is ancient and poorly designed, combining storm water runoff with sewage in the same piping system.

At last, the mathematic models of cargo pump, re-liquefied plant and cargo handling piping network are simulated on PC.

Environmental effects on fatigue crack initiation in piping and pressure vessel steels.

The results showed that the improved software is suited to the piping layout design standard of China.

Also, the piping layout in a pipe rack, the design method and the notices in the design were presented.

the main point of hot piping design and the method to handle piping thermal expansion were obtained.

By using finite element method, a pressure piping with incomplete welding flaw was analyzed in strength and assessed in safety.

Major in Mechanic & Piping or Chemical engineering, or relevant engineering.

Having the Engineering working experience in Process, Equipment, Piping etc.

A measuring and locating system using microcontroller for cleaning piping is introduced in the paper.

PIPING, VESSELS, COLUMNS, EXCHANGERS, REACTORS, etc.

In small part of the ready-made garments, the folded seams into piping are too narrow.

Biotechnology - Performance criteria for piping and instrumentation - Part 5 : valves.

Ships and marine technology - Identification colour for the content of piping systems - Part 1 : main colours and media.

Main propulsion engine not provided strictly the jacketed piping system and the collection system to F. O. Leaking.

One example of the problems associated with these stress factors has been the failure of hoses and piping due to the effect of water hammer.