单词 | path generation |
释义 | 例句释义: 路径生成,通路形成,轨迹生成,轨迹发生器,轨迹天生 1. Optimal design is applied to the size synthesis of a plane eight-bar linkage giving path generation of a machine horse S walking mechanism. 本文应用机构优化设计方法,对再现给定机器马行走机构脚轨迹的平面八杆机构进行了尺度综合。 www.dictall.com 2. In this paper the optimization method is applied to size synthesis of path generation of a seperate transplantation mechanism. 应用优化设计方法,对再现轨迹的分插机构进行了尺度综合。 www.dictall.com 3. The experiments demonstrate the algorithms of image segmentation, mass data grouping and fly-path generation are more robust and practical. 仿真实验结果表明,本文提出的图像分割算法、数据集快速分组算法及漫游路径自动生成算法具有较高的鲁棒性和实用性。 www.lw23.com 4. The theoretical results showed validity of the path generation and convergence of the path following algorithms developed. 理论结果表明路径生成和跟踪算法的有效性。 www.fabiao.net 5. It is realized that the tool path generation on the complicated surface, machining simulation and the automatic generation of NC program. 从而实现了复杂曲面的刀具轨迹的生成,加工仿真及后处理,最后自动生成了数控代码。 www.fabiao.net 6. To solve this problem, a new surface auto-subdividing inspection path generation algorithm is proposed. 针对此问题,提出了一种曲面工件自动分块检测的路径规划方法。 www.ceps.com.tw 7. So using the Newton iterative method as tool path generation search method can improve the efficiency of the machining. 因此,刀具轨迹生成搜索方法采用牛顿迭代法能够提高加工的效率。 www.13191.com 8. This paper discusses the construction of stock-remaining model and the tool-path generation of clean-up machining. 本文论述了留量模型的建立和清根加工轨迹的生成等关键问题。 www.dictall.com 9. Carry on the NC machining simulation in UG for the method of tool path generation. The method has been proved available. 利用UG软件进行了闭式叶轮加工仿真,验证了本文所提出的刀具轨迹规划方法的正确性。 www.fabiao.net 10. Based on the geodesic, a novel parallel equidistant path generation algorithm for composite fiber placement was implemented. 针对复合材料自动铺丝技术轨迹规划问题,提出了一种新的基于测地线的平行等距轨迹规划算法。 tech.zidian8.com 1. Moreover, this new proposed tool path generation method is verified by 3 D simulation results and grinding experiment. 通过三维仿真及实际磨削加工试验验证了该刀位计算方法的实用性。 www.chemyq.com 2. The three-axis ball-end surface machining tool path generation algorithm and interference algorithm is studied in this paper. 本文对三轴球头刀加工曲面的刀具轨迹生成算法和干涉检查算法进行研究。 www.13191.com 3. Here, the path planning includes both path generation and path following. 本文的路径规划问题包括路径生成和路径跟踪问题。 www.fabiao.net 4. An algorithm of sub-regional scanning path generation is presented in the paper. 提出了一种分区扫描量生成算法。 www.ceps.com.tw 5. Study the tool path generation algorithm of 3-axis machining in low dimensional space. 研究低维空间三轴加工路径生成算法。 www.fabiao.net 6. A new approach to compound tool path generation based on discrete cutter locations is proposed. 本文提出了基于刀位点的复合刀具路径生成方法。 paper.pet2008.cn 7. A tool path generation method is presented for NC machining based on vector analysis and NURBS. 描述了基于矢量分析和NURBS的数控加工轨迹设计方法。 www.chemyq.com 8. A new method of tool path generation in last NC processing based on discrete suface is presented in the paper. 从基于曲面离散点的角度,研究了在鞋楦的数控加工中无干涉刀具轨迹生成的方法。 www.chemyq.com 9. Study of NC Tool Path Generation From Measured Discrete Data Point Cloud 从测量的散乱数据点云直接生成数控刀具路径的研究 www.ilib.cn 10. Algorithm for NC cutter path generation during cylindrical milling integrated impeller 整体叶轮侧铣数控加工刀位轨迹生成新方法 www.ilib.cn 1. Optimal Synthesis of Planar Four-bar Linkage for Path Generation Using Genetic Algorithm and Structural Error 基于遗传算法和结构误差的平面四杆机构轨迹优化综合 ilib.cn 2. Research of surface reconstruction and path generation by ultrasonic inspection 超声检测中曲面重构和路径规划方法研究 www.ilib.cn 3. Tool-Path Generation Algorithm on Automatic Recognition Uncut Free Pocketing for High-Speed Milling 自识别加工残区的高速铣削刀轨生成算法研究 ilib.cn 4. Curvature Based Algorithm of Cutter Location Path Generation for NC Machining of Freeform Surfaces 基于曲率的曲面加工刀位轨迹生成算法 ilib.cn 5. Researches on Curve Surface Modeling and a Method of NC-EDMMilling Path Generation 曲面造型及数控电火花仿铣加工轨迹生成方法的研究 service.ilib.cn 6. Research on the Algorithm of the Planar Contour Milling Tool Path Generation 平面轮廓加工刀轨生成算法研究 service.ilib.cn 7. Research on Composite Fiber Placement Path Generation Algorithm 复合材料自动铺丝路径生成技术研究 service.ilib.cn 8. Research and Implementation of Finish Tool Path Generation with Section Plane Method 截平面法加工刀轨算法的研究与实现 service.ilib.cn 9. Geometrical design and tool-path generation of three dimensional impeller 三元整体叶轮的几何造型与数控加工刀具路径规划 www.ilib.cn 10. Some Simplified Approaches for NC Tool Path Generation in Reverse Engineering 逆向工程中数控加工刀具轨迹生成的简化方法研究 www.ilib.cn 1. Path Generation of Geared Slider- Rocker Linkages with Prescribed Timing 带有预定时标齿轮摇杆滑块机构的连杆轨迹生成 www.ilib.cn 2. Tool Path Generation for Five-Axis Numerical Control Machining from Laser Scan Points 基于激光测量点云数据的五坐标加工刀轨生成 www.ilib.cn 3. Progress in Research on the Theory of Mechanisms for Path Generation 机构轨迹生成理论研究进展 www.ilib.cn 4. Optimization in Path Generation for the Hybrid Five-Bar Mechanism 混合驱动五杆机构的轨迹规划 www.ilib.cn 5. Research on Straight-Lines Mechanism Path Generation by Using Numerical Atlas Method 利用数值图谱法进行多杆直线导向机构的轨迹综合 www.ilib.cn 6. Uneven Offset Technique in Tool Path Generation for Free-Form Pocket Machining 型腔环切加工的非均匀偏置算法 ilib.cn 7. Study on Path Generation Method of Curved Surface Part for Ultrasonic Inspection 曲面工件超声检测路径规划方法研究 www.ilib.cn 8. Synthesis of Spherical Six-bar Path Generation Mechanisms 球面六杆机构轨迹再现综合 ilib.cn 9. Tool-path generation in NC machining of Loop subdivision surfaces Loop细分曲面数控加工刀具轨迹的生成 ilib.cn 10. Tool Path Generation for Fine Milling of Pocket Boundary Corners 型腔边界拐角精加工刀轨生成算法的研究 ilib.cn 1. Research on robust design of path generation mechanism 基于随机模型的轨迹发生机构稳健设计研究 www.ilib.cn 2. NC tool-path generation method for machining of helical surface 螺旋面数控加工刀具运动轨迹计算方法研究 www.ilib.cn 3. Path Generation of Structure Testing 结构测试中的路径产生 www.ilib.cn 4. Tool Path Generation for High-Speed Milling of Pockets 型腔高速铣削刀轨生成算法研究 ilib.cn 5. Algorithm of Tool Path Generation in Rough Plunge Tooling Based on Scallop Height Restriction 基于残留高度约束的插刀粗加工刀位轨迹生成算法 www.ilib.cn 6. Researches on contour-parallel feature unit of NC-EDMMILL path generation 电火花仿铣加工轨迹环切特征单元生成算法研究 www.ilib.cn 7. Algorithms of 5-axis tool-path generation for high speed milling impeller-surface 叶轮曲面5轴高速铣加工刀轨生成算法 ilib.cn 8. Interference-free Tool-path Generation Approach Based on Massive Measured Data 基于测量数据直接数控仿形加工路径生成方法的研究 service.ilib.cn 9. Study on Tool Path Generation from Measured Data 测点数据生成刀具路径研究 service.ilib.cn 10. tool - path generation in the nc machining ofcompound surfaces 加工刀具轨迹的生成 www.ichacha.net 1. The Technology of Tool Path Generation in Any Planar Region 平面任意区域加工的刀具路径生成技术 service.ilib.cn 2. Five-axis machining tool path generation based on polar projection method 基于极坐标投影法的五轴加工刀具路径生成法 www.ilib.cn 3. A Review of Tool-path Generation in Multi-axis NC Machining 多轴数控加工刀位轨迹的生成技术综述 ilib.cn 4. Path generation algorithm based on improved Z-path coverage strategy 基于改进的Z路径覆盖策略的路径生成算法 www.ilib.cn 5. Tool Path Generation for Five-axis NC Machining Based on Improved Iso-scallop Method 用改进的等残留高度法生成五轴NC加工刀位轨迹 ilib.cn 6. Automatic Tool Path Generation of Three-Axis NC Rough Machining Based on Solid Model 实体模型的三轴数控粗加工刀轨生成算法 www.ilib.cn 7. New Tool Path Generation Algorithm for Three-Axis NC Machining Based on Solid Model 一种基于实体模型的三轴数控加工刀轨生成算法 www.ilib.cn 8. Method of Tool-path Generation in Last NC Processing Based on Discrete Surface 鞋楦数控加工中基于曲面离散生成刀轨的方法 www.ilib.cn 9. Tool-path generation method based on CAD model in shoe last NC processing 基于CAD模型的鞋楦数控刀位点算法 www.ilib.cn 10. Tools path generation technology based on image 基于图象的刀具路径生成技术 www.ilib.cn 1. Tool path generation based on point cloud directly 直接基于点云数据的刀具轨迹生成 www.ilib.cn 2. Tool path generation for STL model based on vertex offset 基于顶点偏置的STL模型刀具轨迹生成 www.ilib.cn 3. Tool Path Generation Based on STL Data Model 基于STL数据模型的刀具轨迹生成 service.ilib.cn |
随便看 |
|
英汉双解词典包含2704715条英汉词条,基本涵盖了全部常用单词的翻译及用法,是英语学习的有利工具。