powder

The word "grain" is an old ordnance term for explosive powder or even for blocks of cast powders or crystals.

The doctor came that day to see Natasha, and gave directions for the powders to be continued that he had begun prescribing a fortnight ago.

In the case of bulk materials such as pellets, powders and granules: a portion taken from a sample and used to carry out a test.

They are prepared in the form of molding powders which can accept colorants and are those used for production of decorative plastics.

Abrasion is one of the main reasons contributing to unexpected stop, while using cyclone to separate powders coal, coke and aluminum oxide.

The effect of every factor of the composites powders was investigated and influence mechanism was studied.

As Joe powders her face for the shoot, he gazes at her with naked adoration, perspiration forming on his brow like evening dew.

Or a horse might have minor cuts which can be dealt with by antiseptic lotions, powders, disinfectant sprays, etc.

Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter).

The general and the prospective developments of the metallic powders rapid prototyping technology are introduced.

The HVOF deposition process did not significantly deteriorate the powders used.

Ceramic powders colloidal processing techniques are used to fabricate large size, complicated shape ceramic parts of high reliability.

The coupling agents has no obvious effect on the hardness when nano powders were used as strengthened particles.

Indian defence scientists are planning to put one of the world's hottest chilli powders into hand grenades.

These powders are substantially able to meet the requirements of manufacturing high CV chip tantalum solid capacitors.

Besides insolubility, the main factors to be taken into account are the viscosity and the content of oils, fats, surfactants and powders.

All powders should be kept in airtight jars or tins as they quickly deteriorate if allowed to become damp.

All solder powders that are used for our paste manufacturing are made under inert atmosphere and under tight quality control program.

A fine, soft and handy black powder puff particularly suited to the application of HD Powder and other loose powders.

After experimental verification, the software can be used for real-time detection of various powders.

More over, the bounds of the content of stone powders in the pre-mixed mortar are deduced in case of different cement dosage.

At the meantime, black pigments also can improve the surface roughness, which function as powders in PMEDM.

By improving the homogeneity and dispersity of the colloid, theagglomerate state of the powders can be controlled effectively.

It seems my elixirs and powders have cured all that once ailed this city.

According to the company, the rubs use roasted cocoa beans or unsweetened cocoa powders to complement the smokiness of the grilled meats.

A harvest golem seems a simple scarecrow, but a crafter must lace its innards with sachets of expensive powders and ground herbs.

Shrinkage can be large, due to both the fine particle size of the powders and the substantial proportion of polymer binder used.

The team has been developing a new approach to the problem: lasers made of ceramic powders that are pressed into spark-plug sized cylinders.

Company's offerings include auger fillers for powders and liquids, checkweighers, and a full range of parts and services.

Fiddling with the little brushes, fine powders and sticky tape can test the patience of the most fastidious crime-scene investigator.

Silver-copper composite powders can be prepared with coprecipitation method, and it has oxidation resistance at room temperature.

Their physical properties and application functions are better than the corresponding wettable powders and emulsion.

Nanometer copper powders were prepared from acidic waste etching solution containing copper using hydrazine hydrate as a reductive agent.

Often considered a natural alternative to makeup, mineral-based products often come in the form of powders.

Also separately buy a laboratory powders, films and film into a bundle of newsprint.

But a recent market survey found spices like vanilla materials and ethyl vanillin in many well-known infant milk powders.

Process for producing polyolefin coating, substrate provided with said coating, and its use for coming into contact with moving powders.

"Nothing can do it any good, " she had answered his inquiries. "And besides, I don't take headache powders. Doctor Hall won't permit me. "

I started with protein powders; one thing led to another and I started on steroids just before I turned 20.

Metallic particles in powders and deodorants could be visible on your mammogram and cause confusion.

Candace herself does not know the origin of the gun powders and other resources that go into these.

Avoid using deodorants, antiperspirants, powders, lotions, creams or perfumes under your arms or on your breasts.

Two million of us now consume them in the form of drinks, yoghurts, powders and capsules.

Compared with acrylic emulsion polymerized with soap, emulsion polymerized without soap showed better compatibility with inorganic powders.

The various powders are then blended into a single, uniform mixture.

Now mother milk failure of supply, buy milk powders for kid to all lack money, Gao Zong Bao's baron and feme have to resort from community.

Some important application of microwave in synthesis of powders, semiconductor, membrane and supports nanophase materials were introduced.

The results show that the burr shape of the Ni powders can increase the conductivity and decrease the percolation threshold of the coating.

The main factors that influence the quality of PZT piezoelectric ceramics include aggregation of powders, stoichiometry and aging etc.

In this paper, hydroxyapatite powders and porous hydroxyapatite blocks were synthesised by chemical precipitation and hydrothermal method.

Nanometer amorphous alloy powders have attracted extensive attention due to their unique isotropic structural and chemical properties.

He finally unveils the skull, heats it over candlelight, and begins to add powders and pewters from his table.

Drag the mouse ornaments to a neighboring girl who , it renewed hair - Click body changing clothes, it Face Powders for color .

Magnetic properties measurement proved that coated composite powders have fine ferromagnetism and magnetic anisotropy.

SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.

Redispersible polymer powders are usually prepared by spray drying, the original emulsions which are synthesized by emulsion polymerization.

At such temperatures, the powders react internally to remove porosity and fully dense articles can be obtained.

Two different white powders are thought to be calcium carbonate and calcium hydroxide.

SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF INORGANIC SULFATES. GRAVIMETRIC METHOD.

The diamond blade segments are made up of a mixture of diamonds and metal powders.

The morphology of the powders was characterized by transmission electron microscopy(TEM) and X ray diffraction (XRD).

Re-disappeared polymer powders noticeably increased the adhesive shearing strength of cement-based interfacial agents.

Determination of gadolinium . Samarium . Dysprosium and europium in uranium dioxide powders and pellets by horizontal ICP- AES.

The floral and fruity dish may look simple on the plate, but it requires liquid nitrogen, dehydrated fruit powders and floral essences.

POWDER METALLURGY. METALLIC POWDERS. DETERMINATION OF APPARENT DENSITY BY OSCILLATING FUNNEL METHOD.

The paper summarizes sintering process and sintering motivity and studied the sintering capability of complex ceramic powders.

Agropharmaceutical products. Determination of the suspension behaviour of wettable powders.

XXX Corp. , manufacturers a wide range of powder compositions including iron, copper, silver, nonferrous premixed. solder and tin powders.

It is showed clearly that hydrothermal preparation could potentially become the dominant process for the production of nano ceramic powders.

The production technology for Mg and Mg alloy powders are: grinding milling, atomisation, melting and recycling, turning and chipping.

Drag the mouse to Meimei body ornaments, it renewed hair-Click body changing clothes, click on the upper left corner Face Powders for color.

The problems existed during testing the particle size of ammoniummolybdenate powders by Fisher method have been analysed.

Nanometer ZnO powders were prepared by sol-gel method. The structure and performance of the sample were studied by XRD, TEM and UV-Vis.

Finally, nano-powders of titanium nitride, titanium dioxide, copper oxides and zinc oxide were produced by electrical explosion of wires.

Vertical and horizontal form, fill and seal machines for packaging liquids, creams, tablets, powders, and granular products.

SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF TOTAL SILICA CONTENT. GRAVIMETRIC METHOD.

Drag the mouse body ornaments to Shu Qi, it renewed hair-Click body changing clothes, click on the upper left corner Face Powders for color.

Lead-free glass powders were also synthesized with a solid synthesis process.

Tools for recovering fingerprints include brushes, powders, tape, chemicals, lift cards, a magnifying glass and Super Glue.

The substitution of evacuated powders for high vacuum alone will usually improve the insulation by reducing the radiant heat transfer .

Particle size analysis. Determination of particle size of powders. Optical microscope method.

SURFACE ACTIVE AGENTS. WASHING POWDERS. DETERMINATION OF TOTAL BORON CONTENT. TITRIMETRIC METHOD.

Flavoring powders are made of different spices.

The substitution of evacuated powders for high vaccum alone will usually improve the insulation by reducing the radiant heat transfer.

Rotary air locks are available with custom rotor types to suit your applications and materials - powders, granules or smaller pellets.

Niekle-based composite alloy powders were deposited on the Surface of Q235 steel by plasma-arc surfacing .

Xi'an Sanjiang Biological Engineering Co. , Ltd. Is main product plant extracts , active ingredient mono case, and plant powders .

Almost any contaminant consistency can be formulated with powders from Pyron.

Sintering and properties of nano-ceramics, preparation and characterization of nano-ceramic powders are reviewed in this paper.

The stability is studied of the mullite superfine powders prepared in hydrothermal synthesis.

The results show that the technique of spray pyrolysis for preparing micro-sized spherical silver powders has the prospect of application.

Safety evaluation of explosives and powders is an important task of concerns and discussions.

Many researchers pay much attention to Ag-Cu composite powders on account of their fine capability and low price.

Indian curries use dry powders made up of ground spice blends, which better emphasize their earthy intensity.

These self-professed "fruit powders" (Apple fans) sneer at the fruits of the translators' labor.

Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders).

The sintering temperature has important influences on the crystal structure and morphology of the synthesized LiMn2O4 powders.

Preparation of nano-scale powders and application of nanomaterial are persecuted by agglomeration of nano-scale powders.

Surface active agents. Washing powders. Determination of apparent density. Method by measuring the mass of given volume.

Objective To compare the effects of powders with different diameters of schizonepeta on anti-pyretic and analgesic effects.

The effects of particle size of tungsten powders and TaC quantity on densification and grain size were investigated.

WASHING POWDERS. DETERMINATION OF ACTIVE OXYGEN CONTENT. TITRIMETRIC METHOD.

This paper discusses conductive mechanism of composite powders which consist of different raw materials.

In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point.

Nano- sized semiconductor powders for use as photocatalysts have great potential in environmental and energy engineering applications.

The phase composition and microstructure of the coatings and powders dried from sol was observed by XRD and SEM.

The porous superalloy material with oriented linear porosity was fabricated by metal powders sintering.

Powders: Powders are often used in baby care. However, when inhaled regularly they can cause lung damage and cancer. Use very sparingly.

Vermin infest their youth, and fortunes must be spent for curative powders.

It has important academic significance and wide application to electroless plating on powders in this paper.

The active aluminum content of nano-aluminum powders were affected by atmosphere, humidity and temperature.

Yellow transparent diamond crystals were readily obtained when the solution of boric acid or ammonium borate is added into graphite powders.

Powders must be packed so as not to damage other shipments.

Liquid method is preferable in preparing barium strontium titanate powders with high performance.

Give effervescent powders and tablets immediately after dissolving .

It has a high shear mixer impeller incorporated at its bottom for rapid dispersion of powders into liquid.

The available aluminum content of nano-aluminum powders can be more accurately measured by redox titration.

Both product types are effective flow aids, beneficial in the production and application of powders and hair care products.

Low DP cellulose I and II powders, compared to the high DP cellulose I counterparts were more sensitive to magnesium stearate.

Applications in preparation of super -micro powders and flue gas desulfurization are introduced.

a white soluble compound used in effervescent drinks and in baking powders and as an antacid.

This technique has been applied in food additives, beverage processing, oil and fat powders, and inclusion of bioactive components.

Flake-like Ni powders with different size were successfully fabricated by wet sand-milling of micro-sized nickel powders.

Conclusion: wind-dampness-antalgic powders have antiphlogistic and detumescence and antalgic effection.

This three conduction mode affect non-ohmic characteristic of composite powders in different extent.

Densification of ceramic powders to reach a desireddensity is one of the most important factors in ceramic processing.

Advanced technical ceramics. Methods of test for ceramic powders. Part 6 : determination of the specific surface area.

We found that it is connected between powders granularity of lanthanum chromites and synthetic time by SEM.

Choose moisture-wicking socks (not cotton), use antifungal powders, and air out your toes at home.

The prospect for the application of metal nano-powders to surface engineering was predicted.

Advanced technical ceramics. Methods of test for ceramic powders. Part 7 : determination of the absolute density.

Sample preparation - Dispersing procedures for powders in liquids.

The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.

SURFACE ACTIVE AGENTS. POWDERS AND GRANULES. MEASUREMENT OF THE ANGLE OF REPOSE.

This paper describes a series of new bronze powders that produce sintered bearings with improved performance.

and the ceramic powders behave brittleness during explosive shock consolidation.

Try not to inhale powders or aerosol products, which can irritate or damage the lungs.

China man : We chinese are great inventors too. We have great technologies, we invented compass and gun powders.

The invention provides a multistage powder selecting machine for coarse, middle and fine powders.

Finally, the progress of the industry application of powders. . .

Partially alloyed powders are a compromise approach.

Possible applications include liquids, gels or powders containing iron.

Unwrought tantalum, including bars and rods obtained simply by sintering; powders.

HNBR with organic fiber 2 and carbon fiber powders has little impact on mechanical properties but unsatisfactory ablation performance.

But even such powders can be affected by heat and other factors, leading to inconsistent findings.

Redispersible polymer powders as a kind of new-fashioned additive of building materials have very extensive applications.

The second step, or Method B, covers swab sampling of residual suspicious powders for presumptive on-site biological screening.

processing for the homogeneous mixing of alumina powders and additives.

This clinical report suggests that chronic use of headache powders can also be a factor leading to tooth erosion.

SIEVING AND GRANULOMETRY. DETERMINATION OF THE AREA PER UNIT OF MASS OR VOLUME OF POWDERS BY PERMEAMETRY. LEA AND NURSE METHOD.

It could be tomato sauce, or anything could be dispensed -- sand, powders, anything like that.

Waste, parings and scrap of rubber (other than hard rubber)and powders and granules obtained therefrom.

products in which the lactose is present AS crystals, e. g. dry powders and sweetened condensed milk.

The process and properties of YSZ electrolyte thin film made by tape calendering from nano YSZ powders were researched.

Arc and then designed a nano-powders prepared by heating of the experimental apparatus.

The human body are mostly salt-bath powders coated with salt, why only heel can rub it with salt powder?

The effect of different reducing agents and surface protective agents on silver powders' morphology and particle size are tested.

The XZ triple vibration, sieving and filtering machine is used to sieve and filter various powders, grains and serums .

A novel type of coated cutting tool material sintered with coated powders by Sol Gel process has been developed successfully.

The serpentine powders modified by titanate coupling agent in the lubricant oil possess very good dispersibility .

PAN powders was prepared via aqueous suspension polymerization.

The powdered drugs for preparing pills are fine or very fine powders, unless specified otherwise.

advanced technical ceramics . methods of test for ceramic powders . part 1 : determination of impurities in alumina.

In this operation, the powders are spread in a thin layer and exposed to the gas.

CeO_(2) nano-powders were synthesized by coupling homogeneous precipitation and carbon adsorption(method).

The TiO_2 powders in the concentrated slurries mainly existed in the state of single particles according to the TEM observation.

The crust of Tuckahoe Pie is made of Tuckahoe powders and refined flour.

The melting point of polypropylene powders treated decreases.

The this aircraft is suitable trilaterally for seals, Four side seal medicinal powders, Liquid medicine packed in bags product.

Mineral makeup powders contain zinc oxide, titanium dioxide, mica and iron oxides.

Some 3D printers spread metal powders on the print table and sinter the pattern with lasers or electron beams, rather than using masks.

Protein shakes, powders and bars are good for emergencies, but "they're the lowest quality food. "

The gas atomized FCVS alloy powders exhibit excellent thermal stability.

They convey powders and granular material without separation of product.

55%. The fine powders of andalusite are mainly used as high temperature refractory inside metallurgical kiln.

In the present study, fused silica ceramics were prepared by using fused silica raw powders and spark plasma sintering(SPS)technique.

In a silver paint, resin , pigments, solvents, silver powders and some aids are its components.

Ru powders composed of 15 nm particles capped by hexadecyltrimethylammonium bromide (HTAB) were also synthesized by this method.

The disk model is more suited for, predicting the dielectric constants of powders or fine particles at varying densities .

The densification of SiC composite powders was accomplished by vacuum pressureless sintering.

Advanced technical ceramics - Methods of test for ceramic powders - Part 12 : chemical analysis of zirconia.

NBE vertical ribbon dry bulk material blenders are designed to quickly and thoroughly blend powders and other dry solids.

This paper introduced the preparation technology of coated powders and the effect of coated powers on mixing multiphase powers.

Prior treatment of NdFeB powders is vital to the preparation of bonded NdFeB magnets.

This aroma is detectable in many washing powders, soaps, candies and other JASMINE perfumed products.

They also asked the mothers about use in the previous 24 hours of baby products including lotions, powders, diaper creams and baby wipes.

In rural areas, consumers are switching from tooth powders to toothpastes .

And the interaction of three fine powders can improve hardness and wear resistance of welded metal.

In the storage of the Powders it increases their fluidity and stability.

The market also offers baking powders flavored with vanillin of ethyl vanillin.

Second, the effect of the content of stone powders in the manufactured sand for pre-mixed mortar is analyzed.

Import Asphalt Rubber raw material, Scrapped rubber powders and other upgrade additives.

Its main ingredients were pine nuts, peach kernels, sweet-scented osmanthus, sugar and some Tuckahoe powders.

The same holds for dishwashing detergents, when there's a choice, choose dry powders.

These include soaps, shampoos, lotions , and dusting powders, some of which are used several times daily.

It is not applicable to transmit dyed compounds or powders of materials.

Luckily, you can now find several drink mixes, energy bars, and powders that can provide plenty of protein.

Preparation of powders for ZnO varistors by liquid phase process.

Mounds of spice powders are displayed by a vendor at New Market.

The powders synthesized are uniform in size, but there are partially hard particle agglomerates in the powders.

Keep away from organic material and metal powders.

TiC powders were characterized using X-ray diffraction(XRD).

Amorphism can occur when carbon powders are refined further.

conclusion : it is essential to make a examination of e . sakazakii in imported raw milk powders.

Determination of the area per unit of mass of powders by various methods of air permeametry.

Granules and powders, of pig iron, spiegeleisen, iron or steel.

And when you apply makeup, "stay away from powders that can lodge in wrinkles, " warns Reiss-Andersen.

Many powders on Earth can behave in the same way. Try walking in spilt talcum powder.

Powders Products of which 90% or more by weight passes through a sieve having a mesh aperture of 1mm.

Nano cobalt ferrite oxide powders were prepared by sol-gel method.

Fluidization of nano-powders is a world-wide difficult problem in the field of fluidization research.

All powders are wrapped in plastic bags and packed in tins, the lids of which are sealed with adhesive tape.

For, in pure love, heaven did prepare Those powders to enrich your hair.

Nano-TiC powders were synthesized by microwave heating using nano-sized materials TiO 2 and black C.

The XXX brand has been synonymous with premium quality spices, truly vegetarian curry powders, flours and pre-mixes for the past 25 years.

Hardmetals. Sampling and testing of powders using sintered test pieces.

black or white seeds ground to make mustard pastes or powders.

Describe a test to find out which of the powders is calcium carbonate.

But there is a way to have the best of both alternatives. We take one month to do tests, and see if we can easily make the new powders.

Sieve analysis of fine powders with air-jet sieve-apparatus.

It produces particles with powders so as to improve the fluidity and reduce flying dusts.

She can't keep these powders down at all.

It is feasible in theory for injecting blends of coal powders and waste plastics in BF.

They carry toilet waters and perfumed powders.

Mixing and loading chemical powders is very dangerous and can kill or seriously injure you.

Raspings, turnings and granules, graded according to size; powders.

Glycerine was added early in the 19th Century to make the powders into a paste and more palatable3.

can you afford to be green and buy differe- nt powders for differ- ent clothes?

The additives also a effect the morphology of ZnO powders.

and that eco-friendly washing powders may be distinctly eco-unfriendly because they tend to tempt people to use hotter washes.

The transparency of the powders is poor.

This is a nano factory producing almost any material you want as very fine nano powders.

It also recommends using multiple micronutrient powders to fortify foods for children aged between 6 and 23 months.

Only diaper and milk-powders will cost 6000 dollars, but adding others in will make it higher indeed.

It's very important to analyze current application and future development of nano-ceramic powders.

Powders tend to cake and will also cause skin irritation.

PRODUCTION OF ATOMIZED IRON AND STEEL POWDERS AT QMP CO.

Once the powders are absorbed, blend for 30 seconds to make sure they are thoroughly incorporated.

To copy card process, you must clear any residual surface powders and charged ion particles.

Objective To investigate the anti-aging effects of Seamin powders.

Or use silicone carbide powders on screen for processing, pellet is 20 micron.

Novel high energy solid propellants are generally added mass ultra-fine aluminum powders in order to promote its energy.

When needed, the dried crystals could be mixed with water, much as we mix soft drinks from powders.

The highest levels were linked with shampoos , lotions and powders, and were most prevalent in babies younger than 8 months.

The girl powders her face every morning .

"They don't sit in fine lines like powders do, " she says.

Among them, the oxide powders are a kind of widely used powders.

About 65% of the ceremonial powders, including sindoor, which is used as a symbol of marriage, contained the same amount.

Inability to mix two powders without getting a different surface appearance, such as gloss reduction or craters.

Today, powders and similar products such as powder-based eye shadow primarily serve aesthetic purposes.