pouring process

Using proper baking and pouring process for plaster mold, the castings with qualified size and good surface quality could be obtained.

Proper pouring process would avoid molten iron to be contaminated and reduce blow-hole defect.

Test results has a forecasting and guiding role of theory to the problems on concrete pouring process of the main arch ring.

In the system, resin precoated sand was used as molding material to solve the combustion of Mg alloy during pouring process.

The defects are liable to occur in the concrete-filled steel tubular with small side-lengths or small diameter in the pouring process.

In the pouring process, the control should be concrete and compacting of uniformity.

By indoor and outdoor tests, the mix proportion and pouring process for slab concrete is determined.

Using the vacuum pouring process, the vacuum pouring equipment was developed.

And standing in the pouring process, should take measures to prevent cracks.

Research on Exothermic Coefficient between Foam Model and the Front of Liquid Metal during the Pouring Process in Evaporated Pattern Casting

The Hydrodynamic Simulation Optimized Research for the Heavy Size Aluminum Casting during the Pouring Process

Solidification Simulation of the Re-pouring Process for Large Steel Casting

Effect of Pouring Process on Microstructure and Property of Cast Ni-Base Alloy with High Tungsten Content

Study on Solidification Simulation of Re-pouring Process for Large Steel Castings

The Pouring Process for Cylinder Block Castings of Automobile Engines

We should develop large purified liquid steel vacuum pouring process, raise the level of forging precision and computer control;

Table 2 The test results for tracking the pouring process