optimization design

Unequal thickness walled rectangular concrete-filled steel tubes (CFT) are a sort of optimization design for rectangular CFT as beams.

This phenomenon is all existed under various kinds of optimization criterion of the progressive structural optimization design.

The next focus of study was McPherson suspension system assembly simulation and optimization design of its structure parameters.

For complex mechanical systems, whole-system whole-life whole-goal optimization design was an inevitable trend.

The method is readily used in practical optimization design of steel and reinforced concrete structures against the deflection limit.

Using this model in optimization design of an air driving reversing device, the result is better than that from traditional robust design.

As a result of the realization of ropeway optimization design, ropeway building will connect with external condition quite well.

The optimization design mainly consists of two contents: adjustment of the mining boundary of open pit and optimization of production scale.

Meanwhile, the result of FEM analysis can work as the basis of structural optimization design.

When carries on the structural design, fully considered dehumidifier working conditions to carry on the structure optimization design.

The results and method of this paper provide reference for the section optimization design of tunnel engineering in equivalent conditions.

Aimed at a uniform distribution of driving torques, an optimization design of pass parameters is carried out for primary bar rolling mills.

The proposed method and conclusion can be extended to the multi-parameter optimization design of the turbo-machinery.

Using grey difference degree, multi-objective optimization design can be converted to single objective optimization.

The conclusions have theoretical significance for optimization design and vibration control in periodic piezoelectric composite structures.

A new optimization design method-ant colony algorithm was introduced to be applied in the optimization design of sewerage system.

This method can be applied to pre-research and multi-objective optimization design of hypersonic QWV.

Optimization design of a double layers cylinder lattice shell is systemically introduced.

The method proposed in this article can be applied in the parameter identification of black box and structural optimization design widely.

So carrying out theory research according to the main geometric parameters is quite necessary for providing optimization design with basis.

It is mainly important that the flow fields are simulated with a certain precision, as to aerodynamic optimization design in this method.

The optimization design of the rigid pile composite ground can be performed with this method.

The analysis results can be guidance for the optimization design and maintenance of inclined T-tube joint.

In this paper, the optimization design of the transonic airfoil is performed by the Response Surface Methodology(RSM).

After optimization design, economic solution and mechanical solution all can be improved.

The method has some guidance and practical value to the parameter optimization design of elastic components of apparatuses and instruments.

The numerical calculation method and results have great significant for the hydraulic optimization design of turbine.

This result can provide theoretical guidance to the optimization design and practical application of shovel-shaped fiber.

I search for the optimization design strategy of High-rise residential buildings, realising the high comfort of habitation.

This is a very painful, whether from the long tail words or from the website structure optimization design.

Using these optimization design program in Tianjin Unicom local transmission network optimization work.

The machine optimization design method in combination with the reed valves geometry shape was employed to optimize the design.

This paper proposes an optimization design method for multi-channel broadband phase shifter with constant difference step.

These provide the design variables for the automatic optimization design of the follow-up work.

Structural optimization design for the gantry crane is realized on the basis of foregoing research and analysis.

A genetic algorithm for the optimization design of multi section branch-line hybrid is presented and the algorithm is improved.

In this paper, a model for railway noise prediction is established. An optimization design method for L-shaped noise harrier is presented.

In this paper, the optimization design of the transonic wing at single and multiple design-points is performed by RSM.

The optimization design problem of controller parameters of optimal on-off times attitude maneuvers with switch moment is investigated.

Both theoretical analysis and experimental results show that the optimization design in our existing device can achieve the desired results.

The structural system reliability is taken as control parameter for structural optimization design.

Finally three optimization design schemes of bolt connection are put forward after engine's performance is optimized.

This paper carries on movement interference, finite element analysis and optimization design.

And it provides a general and impersonal evaluation rule for the optimization design of the thermal driven micro-pump products.

It is studied a conventional columnar gas liquid separator and did computation simulation and structure optimization design.

Optimization design on the iron beam sectional of the electricity transformer.

Some superresolution optimization design models and examples are presented with figures testification .

As the key component of the heavy-duty manipulator, the clamps are optimized based on the optimization design technology.

three. Carries on the optimization design to the support, obtains the optimized hexagon grid support.

An optimization design method was proposed for a Fuzzy-Neural Network (FNN) structure based on chaotic variables.

Results of analysis provide evidence for tunnel optimization design and safe construction.

The results and conclusions can provide referrences for optimization design of this kind bridges.

The conclusion has reference value for structural optimization design of composite beams.

Optimization design method of welded structure was put forward with welded joint fatigue damage as constraints.

The optimization design for remaking the survey control network of mineral deposit was discussed in this paper.

Briefly presents the merit and the elementary principle of the optimization design.

The solution process of the mathematic models for optimization design of crude oil pipeline is given.

The die stress distribution is analyzed and the optimization design for the square tube die is presented.

Summarizes the basic idea and working mode of the product optimization design.

Optimization design on the roll array was done by taking two straight segments in the straightening machine.

Then the optimization design method of curve fitting is established for throttle slice thickness.

The paper carries out the research on optimization design for power unit of full driller.

In addition, the reliability optimization design models of mechanical parts and mechanical system are discussed separately.

In the past decades, the optimization design problem of the logistics network was study widely, and obtained abundant outcomes.

in the system optimization design based on the packaging machine, high-speed development to.

The results are useful to the optimization design of CMA mechanical structures.

Multi-level optimization design based on the multi-level optimization technique and shape optimization method is researched in this thesis.

This method provides an important way for fracture optimization design.

The optimization design based on the surrogate models is a valid strategy for reducing the RCS of wing structure with low detectability .

New optimization design, high strength, wear well, light weight.

According to simulation results, the optimization design conditions are raised and related energy consumption is also analyzed .

Finally, the lightweight optimization design on rear frame is carried on.

At last, the results of robust design and fixed optimization design are compared.

Optimization design method based on fuzzy fiduciary level is proposed to reduce deepsea high pressure airtight cabin weight.

The technical requirement of prototype was meet. The date and method was accumulated for further optimization design in the future.

In this thesis, the structural optimization design of EBZ135 planetary reducer is reasonable.

It is a powerful and sophistical tool for optimization design of electric machines.

The optimization design has stability under the effects of random uncertainties.

The results have a critical influence on the further improvement of optimization design of hydraulic fracturing.

How to choose a best scheme of the two factors, it's the intention of deep excavation optimization design.

NIRVANA air compressor and the optimization design.

It is showed that the method of optimization design can meet the need of hydroforming a car beam with high forming quality.

Speech Recognizing Network Optimization Design Based on "Growing Tree"

A method of drive train parameter optimization design based on design of experiment (DOE) is developed.

Based on the "3 stages" multiple optimization calculation method, the optimization design of buckle is undertaken.

Then, a kind of optimization design method of the cooling parameters based on the minimum frequency changes of the cavities is proposed.

An optimization design method of the tower structure of 600kW-Wind Turbine was adopted herein.

The products management module is developed, which is used to provide data support for optimization design. 3.

This issue is based on the platform of NX, in order to enhance the automation and intellectualization of the bus body optimization design.

Optimization design on lifting mechanism of the side crane used for container

Aerodynamic Shape Optimization Design for an Air-launched Rocket

Optimization Design of Immersion Magnetic Lenses Used for Projection Electron Beam Lithography

Optimization design of fuzzy reliability of Novikov gears driving with double circular arc tooth profiles on account of genetic algorithm

Optimization design of the distribution route of chain operation taking account of reverse logistics

Genetic algorithms used for optimization design of diffractive optical elements

Optimization Design and Its Application Analysis of a Constellation with Common Ground Track

Geometric Parameters Optimization Design and Performance Analysis in a Vehicle Turbocharger Centrifugal Compressor

Optimization design of new intelligence PID controller for the ship's course

Establishment of the mathematical model of the mechanical chain transmission design and its optimization design

Optimization design of a longitudinal kicker for a Beam Feedback System

Optimization Design And Manufacturing Control of The Heat-exchanger

Research on Structural Optimization Design for Key Parts of a Six-face Presser

Investigation into Collaborative Optimization Design Techniques of Aircraft Aerodynamics and Stealth Performances

Dynamical Simulation Optimization Design and of Cam Mechanism for High-pressure Common Rail Fuel Pump

Construction and Optimization Design of a Combined Polynomial Cam Profile for Avoiding Collision

Improved Genetic Polygon Algorithm and Its Application in Concurrent Tolerance Optimization Design

An Improved Genetic Algorithm and Its Application in Optimization Design of the Gear Transmissions

Analysis on Inner Structural Optimization Design for a New Certain Maintenance Fittings Carrying Vehicle

Dewatering for Foundation Project Optimization Design and Settlement Prevention and Cure of a Hospital in Xi'an

Weighting Coefficient Optimization Unification of Lexicographic Method in Fuzzy Multi - objective Optimization Design

Optimization Design of EDG Devices by Means of Two-Point Method

Optimization design and experiment study of two-bend spillway

Research on inner structural parameters'optimization design and its performances test of ceramic ball bearings

Multi-turns Evolution Genetic Algorithm and Its Application in Optimization Design of Electrical machines

Optimization Design of the Long Span Box Floor in Suzhou River Lock Project

Linear Matrix Inequalities Approach to Structural Optimization Design With Fundamental Frequency Constraints

The structure geometrical optimization design of a certain interior wing

Impact dynamics analysis and optimization design of a mobile phone under dropping condition

Optimization design for kinematics accuracy reliability of planar linkage machine with arbitrary distribution parameters

Study on Energy Conservation for Ecology Rural House in Cold Area--Optimization Design of Energy Conservation on Daqing Rural House

Chaos-based Particle Swarm Optimization Algorithm and its Application in Truss-optimization Design

Optimization Design of a Vessel and Its Implementation

Application of a reliability optimization design method for composite cases

Optimization Design of the Low Solidity Vane for the Centrifugal Pump Using Evolutionary Algorithms and CFD Technique

Optimization Design on Engine Mounting System and Cooling System after the Diesel Engine Substituted for Gasoline Engine in a Light Vehicle

The Dynamic Optimization Design of the Combination of AC-AC Variable Frequency Speed Regulation and Variable Voltage Speed Regulation

Study and Application of a New Method in Irrigation and Drainage Engineering Optimization Design

Finite element simulation of hot die forming and optimization design of preform for a blade with large-angle crankle

Optimization Design of the Intelligent Passive Grounding Fault Diagnosis Device for Electric Locomotives

Lu Liu Research areas: Optimization design for information systems Teaching courses: Management Information System, Decision support systems

Topology optimization design of plate and shell structures with discrete variables and its application

Application of the finite element technique on air-conditioner pipeline vibration analysis and optimization design

Multiple Objective Optimization Design for an Underwater Vehicle's Gas Turbine Propulsion System

A Structurally Dynamic and Static Collaborative Optimization Design under Distributed Circumstances

Optimization Design of a Micro-sprinkle-irrigation System for Automatic Nursery

Analysis of the main influence factors of subsidence due to strip mining and the optimization design

Application research of response surface methodology in thin-walled structural optimization design in crashworthiness

Optimization design for cam lifting curve used to drive spool of distributor in hydraulic press

Reliability optimization design of overhead traveling crane with arbitrary distribution parameters

Real-coded genetic algorithm and its application to dynamic optimization design of gear transmission

Optimization design and calculation of a base station coverage in mobile radio networks

Multiple attribute tradeoff analysis and its application in optimization design of warship

Finite element optimization design of the device which support the air supporting probe

Terminal Trajectory Correction Capability Analysis and Optimization Design for Simple Control Projectile

Virtual Optimization Design for Mechanical Structures and Its Application

Structural Optimization Design of a Rectangle Section Reinforced Concrete Pillar under Centre Pressure Based on Reliability

Improved genetic algorithm and its Applications in optimization design of structures

On Better Optimization Design of the Diaphragm Spring Used in Automobile Clutch

Experimental study and theory analysis of semiconductor refrigerator optimization design working status

Characteristic of Cure Measures For Landslide and Study of Optimization Design

Optimization Design of a Chinese Traditional Medicine Machine

Optimization Design of the Structure and Performance of Forerunner Decompression Manostat

Application of the chaotic optimization algorithm to structural optimization design

A Realizability of the Distributed Multiplayer Architecture and Optimization Design of Device Management System of Cement Factory

Application of the Neural Network Response Surface to Aircraft Preliminary Optimization Design

Energy Consumption of Refrigerator and Analysis on Optimization Design for Refrigeration System and Refrigerating Cycle

Analyzing Rigid Body Motion and Its Optimization Design of the Planar Four-bar Mechanism

The Technique of Harmonic Component Control and Optimization Design of Generation and Distribution Electric Power System in Sugar-refinery

Ecological Analysis and Optimization Design for Agricultural Landscape of Coastal Zone along Radial Submarine Sand Ridges in North Jiangsu

Supporting Software Technique for Structural Optimization Design of Electronics Equipment

Common region deflation method for diagnosis of constraint condition in mathematical model of mechanical optimization design

Dynamic Response Optimization Design of Structure with Reliability Constraints on Dynamic Stress and Displacement

Optimization Design of Discontinuous Coverage Space-based Radar Constellations via Steady State Genetic Algorithm

Improved genetic algorithm and its application on multi-object optimization design

Finite Element Structural Optimization Design of Piezoelectric Milling Force-measuring Platform

Optimization design of integral hydraulic fracturing for skewed patterns in low-permeability complex faulted reservoir

Optimization design of domed bulkhead with nonaxisymmetry sphere-conical transitional annulated shell

Optimization Design of the Radiation Device in a Microwave System for Asphalt Heating

Optimization Design of Ground Pressure Fuel Filling for Control Panel Chamber in an Aircraft

Optimization design of the crank shaper mechanism follower for reappearing the expecting sport function

Optimization design for embedded stiffened penstock of hydropower station base on experimental genetic algorithm

Dual-objective optimization design for cost and performance of a solid rocket motor

Optimization design of the integrated voltage-controlled crystal oscillator

Fuzzy optimization design of engineering elevator mechanism applying genetic algorithm and neural networks

Aerodynamic Optimization Design of Turbomachinery with Approximation Model Method

Application of a New Genetic Algorithm to Hydraulic Optimization Design

Topology Optimization Design of Continuum Structures Under Stress and Displacement Constraints

Optimization design of integral fracturing parameters for low-permeability highly faulted reservoirs

Present station and perspective of genetic algorithms' application in mechanical optimization design

Multiobjective optimization design of aerodynamic configuration constrained by stealth performance

Mathematical Modeling and Optimization Design of the Convex Shape Bionic Bulldozing Plate Surface

Topology Optimization Design of the Plain Elastic Continuum with Stress and Thickness Constraints

The Optimization Design of a Novel Biodegradable Polymer Micro-Device

Structure Optimization Design Study of Turbine Butterfly Valve's Valve Body

Aerodynamic Optimization Design of Cascade Airfoil Using Hybrid Evolutionary Algorithms

Research on Parameter Optimization Design for Waveguide Vibration Production Technology

Evolutionary Computation in Aerodynamic Optimization Design

Automobile multi-objective optimization design of power assembly mounting system and software development

Optimization Design of Light Pen for Use in Space Coordinate Measuring Systems Without Guideway

Research on Optimization Design of Muffler and Its Performance Simulation Method

Immune Genetic Algorithm and Its Application on Multi-object Optimization Design

Optimization design of vibration-resistance parameters of attitude maneuver switch controller

Application of improved particle swarm algorithm in optimization design of agricultural engineering

The optimization design of a simplified adaptive wing's aerodynamic shape

The Optimization Design on Heat Transfer Enhancement of Twisted Strip Inserts with Oblique Teeth in the Natural Circulation Evaporators

Application of ANSYS Parametric Design Language in Optimization Design on Load-crossbeam of Electrical Dust Precipitator

Optimization Design and Study of Error Correcting Device for Conveyer Belt

The system optimization design about the storm water pumping station of Taiyuan Shengli street

Optimization Design of Form of Fracture in Underground Cavity

Optimization design of a wire array load for Z-pinch plasma implosion experiments

An Optimization Design Method for the Configuration Parameters of Spring Hydraulic Floating Mechanism in Gun

The Discrimination Method to Optimization Design of Light Line Illumination

Optimization design of parallel roller heat correctional machine and improvement of depressing equipment

Structural dynamics optimization design with constraints of multiple natural frequencies and modal shape

Optimization Design Approach of Formation Flying for Distributed Spaceborne SAR Super-resolution Imaging

The application study of BP network in mechanical optimization design

Genetic Simulated Annealing Algorithm in Optimization Design of Cylindrical Linear Induction Motor

A Optimization Design Approach of Formation Configuration of Distributed Spacecraft Mission System

Particle Swarm Optimization Design Method for Retaining Structures in Excavation Engineering

Optimization Design Method and Application Research on Highway Gravity Retaining Wall with Balancing Platform

Optimization Design of Product Configuration for the Lifting Mechanism of Dump Truck for Mass Customization

Optimization design of the protecting housing of an flight data recorder

Analysis of operation failure of hard disk drive under vibration circumstance and optimization design of vibration isolator

The analysis and design of launch vehicle performance-calculation integrated optimization design system

Structure Optimization Design Study of Fuselage Main Frame

Stochastic Optimization Design for Stochastic Skeletal Structures

Comprehensive-performance Optimization Design Method for Multi-stream Heat Exchangers

Application of Genetic Algorithm to Constructional Parameter Optimization Design for Flying Shear

Clear concept and strong organizational ability for project scheme optimization, design cost and control process;

Application of Genetic Algorithms in Structural Optimization Design with Discrete Variables

Reliability optimization design of steel plate spring with arbitrary distributed parameters

Genetic Optimization Design of the Cement-sand Ratio of Tailings Consolidated Filling in Anqing Copper Mine

Simulated annealing approach for the optimization design of superconducting MRI main magnet

Analyses on Stability of Upward Slop in Tunnel and Optimization Design of Protection Project Giving Consideration to Landscape

Research of optimization design system on the planar linkage for the reappearing expecting sport function

Application of an Orthogonal Experiment in the Optimization Design of Welding Tester

Aggregate Gradation Optimization Design of Cement Stabilized Aggregate and Effects of Molding Methods on Test Results

Optimization Design on Signal Processing Module for Speed Sensor of Electronically Controlled Diesel Engine

Multilayer Microperforated Structure Optimization Design Using Genetic Algorithm

Genetic Algorithm and Its Application in Truss- optimization Design

Summary on Application of Sensitivity Analysis to Transportation and Storage Optimization Design

Finite element optimization design of the structure parameters of the flat type connector units for mining

The Application of Finite Element Analysis Method for the Optimization Design of High Speed Motorized Spindle

Application of genetic algorithm to multi-stage compressor aerodynamic optimization design

Optimization design for collimating semiconductor laser beam with elliptic cylinder lenses

Structure optimization design of silicon micro capacitive accelerometer

Implementation of Computer-Aided Discrete Tolerance Optimization Design

Optimization Design for the Flexible Assembly Systems Incorporated with Human and Machines

A Study on the Reinforcement Optimization Design of Pre-stressed Concrete Offshore Platform with Mixed Discrete Variable

Stochastic Optimization Design for Construction Diversion System

Investigation on optimization design of equivalent water-depth truncated mooring system in hybrid model testing

Power Transformer CAD Optimization Design and Its Application

Optimization design for increasing friction pair abrasion resistance between connection-rod and piston-pin

Numerical optimization design on the duct behind water cooler of the new diesel dynamoelectric system

Fuzzy Optimization Design of the Vertical Beam for Extracting Core Work Set on Heat Exchanger Maintenance

Probe Into the Optimization Design of High Voltage Transmitting Line During the New Period

Pre-estimation and optimization design on the static and dynamic characteristics of high-speed parallel manipulator

Optimization design of the parameters of high-rate gravel-packing sand-preventing technology

Optimization Design of Structure and Controlling Measure of Raised Connected Plastic Greenhouse

Optimization design of large water delivery ditch project of the middle of South-North Water Transfer project