of metal

for the simple reason that I was left with several curiously shaped bits of metal which did not seem to fit anywhere.

Rosita: This creature came out of the shadows. . . a man made of metal.

French television images showed that Sarkozy was on a piece of metal over the barrier, trying to greet the crowd.

A three-story building has been tipped over on its side and the only sign of its former existence is the hollowed shell made of metal beams.

Further imagine that this pipe is not made of metal but a transparent magnetic field.

Out of the dark night came the most terrorizing sound of metal clanking and clattering.

The fibers consist of an array of metal electrodes connected to a semiconductor and are covered by an insulating polymer sheath.

Every office made a commitment in Shanghai to deliver at least one piece of metal in an international award show.

Midway up the door was fixed a plate of metal: Simon could not tell if it was a latch or a peephole cover.

What you see is not siding but enforcement ribs as the walls of the construction are made of metal.

This makeshift knife is simply a piece of metal sharpened with a sandstone, but it may turn out to be extremely.

The capacitance to ground of that bit of metal produces a small phase adjustment in the circuit.

A thousand pounds of metal is an enormous amount of wealth in this era. To waste so much of it in a burial is pretty unusual.

Light with high harness , Environmental friendly , Easy to clean, Luxury looking with top grade quality, and strong sense of metal .

After all, with a newspaper you get a half hour's interesting reading, while with a coin you just get a little chunk of metal and a date.

One of a pair of metal supports used for holding up logs in a fireplace .

The invention relates to a grinding device used to grind and furnish the surface of metal or non-metal material.

He took a piece of metal and hit the side of the car again and again.

He looked out toward the frozen lake. Near the trees he saw a shining piece of metal. When it moved, Ben saw that it was a long gun.

Eyes suddenly fell across the little boys, he is the monitor of our class, with a pair of metal frame glasses.

Lead into reduction reaction steps before, deposition of metal ions in the cathode near the surface or on the surface transformed.

The heat for fusion welding is generated in several ways, depending on the sort of metal, which is being welded, and on its shape.

When she walked in the door, this is what I saw: A young woman wearing lots of metal, on her clothes and through her skin.

The sensor is just a little strip of metal in that headband there. The rest of it is the bedside console.

There was still fire enough to allow of their being put out of shape, and converted into a sort of unrecognizable bar of metal.

In some pieces the fish appear between large sheets of metal as if viewed through the remains of a sunken superstructure.

The children and I catch up with him in the hardware aisle, where he hands me a small bag of metal hooks.

Sometimes it's easy to see the new piece of metal. Sometimes, it's not.

There's an old folktale about a giant who removes his own heart, locks it in a series of metal boxes, and buries the whole conglomeration.

A rocket is made of metal. There is a hot gas inside it. When it rushes out of the end of the rocket, the rocket is pushed up into the air.

In the early dawn civilization mankind discovered that a heated piece of metal was more easily hammered into different shapes.

And in Amsterdam there's a solid piece of metal to lock it up (and a memorable urinal) just about wherever you need one.

I'd like to be able to do that. First a hunk of metal; then a robot. First some wires; then a mind. First some old genes; then a dinosaur.

The fuselage of a modern airplane is all of metal construction.

There are small pieces of metal that stick out for you to stand on and hold on to.

Nanoparticles of metal can damage the DNA inside cells even if there is no direct contact between them, scientists have found.

The mining subsidence mechanism of metal mine with fractured blocky rock mass is different from that of coal mine with layered rock mass.

A different method, known as spot welding, is usually employed for welding sheets of metal toghter.

The variation of flow behavior and microstructure of metal materials during cyclic straining was described from the point of view of energy.

Sometimes I can almost feel a particular door handle in my hand, a piece of metal shaped like the back of a spoon.

Most parts of that machine will be made of plastics instead of metal so that its weight may be greatly decreased.

As opposed to printing gold, silver, and gold seal products of metal to sweep of the texture to a strong and high gloss, finishing well.

Forever Springs Manufacturing Company used to be a failing manufacturer of metal springs. Now it's a failed iron miner.

Clothing. Garment accessories. Testing of resistance to see-water corrosion of metal or metal-plated fastenings for bathing costumes.

First, fix a very sharp piece of metal, pointing a foot or more above the frame, to the top of the longer stick of the cross.

And, just as when you bend a piece of metal back and forth, it gets hot, Io is being stretched back and forth and getting hot.

The system includes a container of metal and a system configured to delivery biphasic inert cryogen toward the metal.

Both of her hands were now fumbling nervously with the piece of metal; then her shoulders shook.

This paper presented a new technique to determine the elastic-plastic boundary and plastic strains on the surface of metal specimen.

If you run current through them, you can run 1, 000 times more current through one of these than through a piece of metal.

The numerical simulation technology of metal forming is one of the pop domain in metal plastic forming, play a great effect in industry.

Older folk defy death and disability with metronomes in their chests and with hips made of metal and plastic.

pan: A shallow, wide, open container, usually of metal and without a lid, used for holding liquids, cooking, and other domestic purposes.

With no friction between the tracks and the actual train, it will allow it to go at a very high speed without the dangers of metal fatigue.

There was the ringing sound of metal biting into wood. A scream of sheer agony erupted from the air. Bink and Sabrina jumped.

The company will participate in country International market competition, to become a world-class manufacturer of metal cutting.

For a while, the only sound was the dry thud of metal hitting sand.

The Psycho Frame was created by embedding miniscule computer chips the size of metal dust particles into a standard movable frame.

A different method is usually employed for welding sheets or plates of metal together. This is known as spot welding.

A mixture of metal powder and a binder is pressed into a mould to form the shape of the finished part.

The heat resistance and mechanical strength of metal is quite good, but the price and corrosion resistance are its disadvantages.

and a Teflon step for coating the Teflon on the surface of metal sheet after the power coating step.

Plastic and wood seem to be the most popular, but there are also examples of metal business cards.

An open framework made of strips of metal, wood, or similar material overlapped or overlaid in a regular, usually crisscross pattern.

Block proof cover can be made of metal or widely used PVC plastic, the structure is simple for the convenience of installation.

They carry wooden spears, bows and arrows, all fashioned without a single bit of metal.

They must pass through a door where X-rays will show if they are carrying anything made of metal, like a gun.

Steel Wool are often used for cleaning and removing strong stains, rust and grease spots on surface of metal-wares, ceramics and glass.

He claims to have escaped the Venetian prison by using a piece of metal to make a hole in the ceiling and climbing through the roof.

That little bit of metal can conduct electricity and cause a skin burn at the patch site during an MRI scan.

Heat sinks are usually made of metal and often have fins that assist in transferring heat to the atmosphere.

Storage. To store garbage, garbage containers made of metal or plastic with a minimum capacity of 50 L should be provided.

A piece of metal stamped with a religious device , used as an object of veneration or commemoration .

The heat treatment of metal is process which put the metal in some medium and heat to a fit temperature, and keep some time then cool down .

On stripping down a damaged motor, the tappets are invariably found to be heavily pitted and bits of metal broken off the camshaft lobes.

Oil-soluble corrosion inhibitors have been widely used for corrosion protection of metal products and equipments.

The indoor version of this bicycle stand is made of wood and the larger street furniture version will be created out of metal.

Conversion of a metal surface to a less reactive state. A process to reduce corrosion rate of metal surfaces.

A piece of metal left in the sun rises in temperature until it loses heat at the same rate at while it absorbs heat.

Hardness testing is to evaluate the mechanical properties of metal fastest, most economical and most of a simple test method.

The inner door to our cell was made of metal grating, and Jim and I would climb it so we could look out the high window above it.

The mere acquisition of a smooth block of metal and glass does not magically persuade people that they should start paying for news.

This table carved out of metal has 32, 292 holes which represents all the points he made in his basketball career.

Some canopies have narrow strips of metal or wood to provide either sunlight or shade, depending on the position of the sun.

The experiment used to determine the property of fusing of metal wire is designed. Its result tallies with theoretical conclusion.

Firstly pouring it into embryo, then processing into finished products. The processing course is like the processing of metal gear.

Calatrava, who has a low voice and a professorial manner, was dressed in a dark suit and wore glasses with the narrowest of metal rims.

Material treatment is a term applied to a variety of procedures for changing the characteristics of metal by heating and cooling .

The properties, production technology and uses of metal soap as well as the prospect of its use in leather making were discussed.

It was hard to catch people because they only took a little bit of metal from each coin.

Hydrometallurgy: Extraction of metal from ore by dissolving the metal (as one of its salts) and then recovering it from the solution.

Recycling it requires only a tiny fraction of the energy consumed when mining bauxite and refining it into the same amount of metal.

Disturbance of metal media on radio frequency signal is always influencing the effective application of RFID.

There was the sound of hammering, of metal on metal, and then of something heavy falling on to the deck.

the relationship between the fatigue life of ferromagnetic material and the theory of metal magnetic memory has been studied.

The sensor is just a little strip of metal in that headband there.

Washington, the city of form and regulations, turned chaotic, deregulated, by a blast of real winter and a single slap of metal on metal.

In it, tiny quantities of metal self-assemble into a filament as electrons are added to the metal ions.

A thin, cylindrical strip of metal or other material bent in the shape of a long U, used by women to secure a hairdo or headdress.

They walked into a windowless room with shabby carpets fluorescent lights and three rows of metal folding chairs.

Plastic can also insulate from heat and electricity, and when it's really cold, plastic won't stick to your hand like a piece of metal does.

At present, the cutting velocity and the rate of metal removal have attained to a great height.

semi - finished products made of metal or non - ferrous alloys . titanium sheet , dimensions and tolerances.

Pulley deformation is one of the factors affecting transmission efficiency of metal belt CVT.

Chopsticks are most commonly made of bamboo or plastic, but are also made of metal, bone, ivory, and various types of wood.

The existence of metal surface close to the antenna can be a big threat of losing communication capability.

It is a single piece of metal from tip to base but the hilt is usually encased.

But a watch could never repair itself -- it does not consist of living parts, only of metal, which wears away by friction.

Each year as a result of metal corrosion caused by an alarming number of losses.

Making sense of this tangle of metal presents endless challenges to experts.

Resistance welding is performed by passing a very heavy current through the pieces of metal to be joined.

The top and bottom ends of the containers may be made of metal or plastic.

It was a crown or headdress made up of a pierced band or hoop of metal.

Objective To note that the traditional pile of metal casting is still the important methods for root and crown restoration.

Being made of metal, the work tries to express aesthetic appreciation of China's freehand brushwork in modern metal sculpture.

Methods: The average adhesive thickness at different parts of metal casting inner-crowns was measured under travel microscopes by cutting.

A flat piece of metal stamped with a design or an inscription commemorating an event or a person, often given as an award.

And a chunk of metal the size of a tennis ball is as explosive as 25 sticks of dynamite.

Security could be tightened after the authorities began a review to discover how Tates was able to smash through two sets of metal barriers.

Simply flanking the piezoelectric layer with thin concentric layers of metal would not work because metals tend to have a low viscosity.

Cars parked in the street were blown over and over until every bit of metal was bent or scratched.

The Caesium-137 may be buried in a scrap yard under tonnes of metal, and local officials believe it could have been melted down.

That piece of metal in her back hurts almost all the time.

She reported that she occasionally gets the urge to eat something made of metal.

With every bend you weaken the paperclip , and even though it's made of metal, in time the constant wear and tear weakens it so it breaks.

As would be seen later, the mechanics of metal cutting are greatly dependent on the shape and size of the chips produced.

A framework of metal bars used to hold fuel or food in a stove, furnace, or fireplace.

A deep familiarity with the limits and freedoms of metal makes up for his lack of degrees.

Our company is a professional manufacturer to research, design , produce and sell plastic parts of metal precision molds based.

Some only have motorized wheels, and others have dozens of movable segments, typically made of metal or plastic.

The results prove the feasibility and validity of the engine installation of metal rubber damper on an aircraft engine.

The skull had fractures, probably the injuries that had caused the man's death, and lodged in the forehead was a piece of metal.

The flow of metal in controlling area (liquid metal, sticky metal and solid shell) is an uneven medium flow.

How can a speck of metal the size of a grain of salt put out such tremendous amounts of energy?

a rigid strip of metal; a table made of rigid plastic; a palace guardsman stiff as a poker.

I had my head in and was about to open the lantern, when my finger slid on a piece of metal and made a noise.

made of metal and used to fasten things or make cages or fences etc.

The invention relates to the technical field of metal sheet, in particular to a clad metal sheet with a columnar supporting body.

police also seized two toy air rifles and a quantity of metal pellets at the suspects home in tan kwai tsuen , yuen long.

Most of the money today is made of metal or paper. But people used to use all kinds of things as money.

Classic RTM requires a more expensive two-part closed mold, often made of metal.

It is made of metal and can be folded into a shoulder bag.

The effects of the heating of metal wall on steamer boundary effects mainly manifested in the early stage of liquor distillation.

The product that the durability of metal materials, the appearance of electroplating. look!

High speed forging hydraulic press is one kind of metal forming machine to carry out precise and fast open-die forging.

These independent artisan-artists made their pieces out of metal, but he hammered and riveted while she moulded.

fragment of metal or other debris may be flung off the wheel.

In the case of metal straps and bolts, the butting ends should also be cut square.

Among the objects observed, an airplane seat, a life jacket , pieces of metal and an oil slick.

The courts are outdoor asphalt, the backboards are made of metal, and the sleeping quarters are old, dusty, and damp.

Traditional preparation technologies of metal porous materials mainly include powder metallurgy process, casting or deposition technique.

The interface between the matrix and reinforcement plays a crucial role in determining the properties of metal matrix composites (MMC).

During this sintering process the diffusion of metal atoms between the alloy particles produces strong bonds between the particles.

Pulsing current is of significant influence on the mechanical properties and micro structures of metal materials.

The warping and cracking of metal parts are one of key problems in the application of selective laser sintering technology.

Used specialities of metal-base compound material are improved notably and its used life is protracted after mixing super-micro-fine powder.

The huge mass of metal that makes up your car alters the magnetic field around the loop, changing its inductance.

There was only one thing in the Star Zoo made of metal the computer!

What do you think is the identity of this piece of metal?

There is no erosion of the wall and consequently no formation of small particles of metal.

Articles of this Chapter may be made of metal thread.

A baton is a hollow tube. Usually made of metal, not longer than 30 centimeters and weighing no less than 50 grams.

The columns and cross-pieces are made of metal section bars or engineering plastic section bars.

3 years of experience of metal part CNC processing, preferable in tooling assemble experience.

In the material mechanics, the deflection of metal girder is a minute movement, and can't be measured using the normal regulation.

So what we're looking at is a little chunk of metal, and it's shaped like a diving board, and it's sticking out over a ledge.

Electric welding is the heating of two pieces of metal to be welded by electricity.

Surface preparation of metal before chemical process. Removal of a layer of the base metal.

It wasn't until the 15th century when engagement rings as we know them today appeared, made of metal and containing precious stones.

He watched and waited, until he feigned a wild rush, which he stopped midway, for he had seen the glint of metal.

two toy air rifles and a quantity of metal pellets were seized at the mans home in tan kwai tsuen , yuen long.

Effective sequestering of metal ions, resulting in better water retention even though used in hard water processing.

Good reading ability of mechanical and electric drawings, component drawings draft and good understanding of the property of metal material.

The health balls found in the stores in San Francisco's Chinatown are made of metal, cloisonne? or stone.

Vacuolar compartmentalization appears to be the source of tolerance of metal-accumulating plants.

The plastic bag support rack is characterized in that the frames (1), (2) can be made of metal material or nonmetal material.

Straight-line drawbench is the equipment of metal-wire drawing. Its structure is large and its control requirements are complex.

The method for predicting the soil corrosion rate of metal material has re occurrence, and can predict the soil corrosion of metal material.

Specializing in the production of metal, electronics, toys with the specifications of the various types spring.

We have been in line of metal and mineral products for years and hope to have a chance of cooperation with you.

Minimum 5 years experience in electroplating of metal parts, with at least 1 year focusing on trivalent chromium plating.

The metal parts are made out of a flat sheet of metal in every case.

An intricate set of metal layers focuses and manipulates incoming radio waves, allowing the tag to send back a clear signal.

Next, they insert the stent, a collapsible tube made of metal mesh, which props the vessel open.

can be printed out in imitation of metal etching.

The key is made of metal and used for locking door.

Pressure should be the formation of metal plates installed, straight, there should be no construction of the plate surface residue and dirt.

Traditionally, people have thought of robots as whirring bits of metal, but there are those in the field who ask why that need be so.

The brunt of the blast is projected straight ahead, forcing a powerful spike of metal, usually copper, into and through the armour.

Meanwhile, many governments' attempts to revitalize their economies involve big infrastructure schemes that will require lots of metal.

The main problems and effective solutions have been introduced in the machining process of metal forming equipment parts.

A variety of metal substrates can be coated to permit extensive examination of differing conditions.

FAAS method was applied to the determination of metal impurities(in eluding Zn, Na, Pb, K, Fe, Ca and Mg)in high purity lithium carbonate.

Crochet hooks and knitting needles can be made out of metal, plastic, or wood.

The diaphragm spring is a single thin sheet of metal which yields when pressure is applied to it .

As a result, in imitation of metal etching ink does not accept polyurethane system of squeegee, to use together with a rubber scraper.

A curved or sharply bent device, usually of metal, used to catch, drag, suspend, or fasten something else.

Yes, as the ways of metal and paper money begin to die out, the PayPal iPhone App users are poised to become the dominant species.

By employing pulsing current, the processing properties and mechanical properties of metal materials are significantly improved.

The magma originated from the upper mantle and belongs to the tholeiitic series which has undergone immiscible separation of metal sulfide.

And then here's a really, really big close-up of the little piece of metal.

Furthermore, it is shown the cold weldability between the various combination of different types of metal.

Spontaneous self-assembly reaction is an important method for the synthesis of metal-sulfur clusters.

Photographs on the ministry website showed fragments of metal strewn across a road as a thick fog hung over woodland in the background.

An electric conductivity model of metal insulator composites with an interfacial shell is given.

The fabrication of metal matrix composites(MMCs)by using casting technique is accepted as a promising route for large quantity production.

The sintering temperature decreased with the increasing of metal contents, which could improve the mechanical properties of ceramics.

I have sort of created a genre of metal-dance-techno-pop music with a lot of rock anthemic choruses, because that is the music that I love.

A piece of metal just struck one of the car's front window and shattered it.

Mechanical skills (handicraft) regarding the treatment of metal (bending, filing, polishing, embossing).

They studied the pressure dependence of electrical properties of metal-oxide semiconductor in a separate paper.

puts forward the genetic-evolutionary theorem of metal materials, genetic evolutionary-genetic mutable principle of metal materials.

Inhibit the catalytic oxidation of metal ion to the oil as well as the corrosion of sulfide to the copper.

In this paper, the research manufacturing technology and properties of metal matrix composite have been reviewed.

protect by covering with a thin sheet of metal, as of parts of roofs.

As the district attorney paced, the men cut through the first layer of metal. Nothing.

Temper. Temper is the state of metal or alloy involving its structure and mechanical properties .

The service life of metal equipments at high temperature is shortened by poor corrosion resistance and anti-heat shock performance.

Let this be anchored in our minds: Peace is never long preserved by weight of metal or by an armament race.

This paper presents the evaluation results of metal corrosion inhibitors with different formulations through laboratory tests.

Contain stainless steel demagnetization, bright anneal heat, light, quenching processing, aging treatment of metal.

Modern gauges consist of metal foil in the form of a grid.

It is understood that, since January 1, 1994 onwards, our right to suspend collection of metal mineral resources has begun to collect taxes.

Steaming pot of metal plate is by with mold pressed into such a shape.

"Got a nice shard here, " Taylor yells, finding a gnarled piece of metal.

The base is fixedly connected with a ring-shaped steel ring made up of metal materials.

Sometimes the metal can be used again in factories where things are made of metal.

Meanwhile, author discussed the feasibilities and necessities of building of metal compensative system and punitive damage system.

This hear treatment of metal is called annealing .

A second type of galvanic corrosion occurs when a single type of metal encounters soils of varying composition.

True, we would still be able to bend the big pieces of metal fairly easily.

Wang. This consistent relationship has now been included into the all-purposed textbook, Fundamental of Metal Plastic Forming.

Human body shows a reaction of metal ions in a dose-dependent manner, and metal ions serum level decides the biological effects.

Now it is time to look at some other folk art -- like a giraffe made of metal bottle caps.

The size and configuration of metal component of the products can be adjusted according to the requirement of client.

I am writing these words on an extremely thin and stylish, but very light, laptop made of metal.

Its common use is in conjunction with selective gas chemisorption for verification of metal surface area.

Therefore, the preparation of metal nanoparticles with controllable size and shape attracts extensive attentions.

Peace is never preserved by weight of metal or by an armament race.

Plastic instead of metal as a vehicle engine air intake manifold material is the trend of the intake manifold development.

Esca: How can a piece of metal mean www much to you?

It was not merely a piece of metal lost, but all the good it could do was lost also.

Ruspert coating is one of the world's most outstanding anti-corrosion high-tech of metal surface treatment.

Heat treatment is a method by which the heat treater can change the physical properties of metal.

Recovery of metal scrap, copper, aluminum, tin, industrial titanium, titanium copper sand, aluminum, zinc alloy, aluminum, etc.

The course involves a presentation of the mechanical and metallurgical fundamentals of metal machining.

The results showed that rotating speed of metal fluid increased with raising the input voltage under a proper stirring frequency.

The preheatingten1perature of model and porous matter, pouring temperature of metal liquid are the keys to the quality of sponge aluminium.

In this paper, the structure, classfication, nomenclature and development history of metal alkoxides are briefly introduced.

The simplest method of welding two pieces of metal together is known as pressure welding.