numerical analysis

This paper presents the numerical analysis and simulation result of the experimental superconducting magnet stress.

Above research result indicates that the similarity theory can be effectively applied to the numerical analysis of geotechnical engineering.

Both theory and numerical analysis show that this algorithm is stable and reliable.

Finally, numerical analysis is is given to explain the relation among the price, discount rate, purchasing strategy and competitive ratio.

We carried on a simple numerical analysis to the instantaneous friction coefficient of the oscillating flow in the parallel regenerator.

Equation of frequency response is formulated. Influence of each system parameter on system vibration is derived through numerical analysis.

Interpolation formulas are the starting points in the derivations of many methods in several areas of Numerical Analysis.

Numerical analysis is also carried for the alternation schemes and optimization of pipe flow parameters are done as well.

The numerical analysis of controller's stability has also been done to prove the controller is stable in the means of Lyapunov.

The characteristic of the system is discussed, and numerical analysis is made for the performance of transmitting information.

Numerical analysis is carried out to analyze the influence of the electric double layer on line contact elastohydrodynamic lubrication.

Living example of numerical analysis of combination mechanism movement movement indicated the effectiveness of this method.

Numerical analysis can reduce the cost of test, shorten the R&D time tremendously, and raise the competition of automobile manufactures.

Finally, the existence of optimal Perfect-Nash Equilibrium strategies is proved further by a numerical analysis.

Discrete mathematics: logic, set theory, combinatorics, graph theory, and algorithms, complex variables, numerical analysis.

Also, any spreadsheet software can be used to solve simple problems relating to numerical analysis.

the distribution characteristics of temperature grads is given out by the numerical analysis on the unsteady start-up process for the stack.

Finally, we also researched supercontinuum generation in PCF. The numerical analysis shows that the pulse spectrum is widened remarkably.

The finite element method is a very effective numerical analysis method to extremely complex engineering structure.

A numerical analysis on the flow field of a lobed mixer was made by means of N S equations.

At present, there is only numerical analysis method through iteration to get the bond failure load, but it's time consuming.

The finite difference scheme is applied to the steady heat transfer model for the numerical analysis.

general topology, geometry, complex variables, probability and statistics, and numerical analysis.

Numerical analysis was used to simulate the process of sapphire crystal growth by modulating temperature.

In this paper, the non-die sphering process of an spherically inscribed sheel structure is put into experiment and numerical analysis.

The numerical analysis was carried out for the low-velocity impact damages of composite laminates.

In this paper the possibility of periodontitis diagnosis with numerical analysis, namely texture analysis technique, is discussed.

Interval analysis is a new branch of numerical analysis. It has been applied to various field.

With the rapid development of the modern computer, this paper proposed using numerical analysis to obtain the reopens of nonlinear system.

Finally, the numerical analysis methods are employed to compare the decentralized model with the collaborative model.

In design practice, proportion type design uses numerical analysis and is widely applied. It is convenient and flexible.

Buckling deformation behavior of PET bottle under by axial compression load was studied with experiment and numerical analysis.

The mixing behavior of RH vacuum degassing vessel was investigated by combination of numerical analysis and water model experiment.

Combined with natural rainfall, numerical analysis on atomized rain infiltration in fractured rock slope is conduced.

The book mixes together algebra, analysis, complexity theory and numerical analysis.

numerical analysis includes the study of approximation and discretization broadly with special concern for rounding errors.

By theoretical and numerical analysis, the two proposed methods have better convergence speed than the classic golden section method.

Numerical analysis can reproduce the phenomenon of "Support foot distorted" and "Drum-shaped deformation" of.

Behavior of an improved pseudo -viscous frictional damper (IPVFD) was studied by testing and numerical analysis.

Through numerical analysis, the longer wavelength light beam, the faster polarization alters.

Numerical analysis of pressure propagation and energy conversion ratio in sodium vapor explosions.

Chapter IV is the empirical part, we obtain how scaling and long-range dependence affect option pricing by numerical analysis.

Enjoy it! , Just learning numerical analysis, we encountered interpolation.

Numerical analysis is carried out to test the method and results show that the method is feasible.

Finally, the numerical analysis was completed after the solution of generalized eigenvalue problem.

The distributing rule of additional forces of compressible shaft wall is given by numerical analysis and model test.

A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed.

YANG Yu-rong. Three-dimensional numerical analysis of ventilation efficiency of indoor air flow[D]. Chongqing: Chongqing University, 2002.

Russian Journal of Numerical Analysis and Mathematical Modelling .

In the final, the walking machine's optimal mechanism and walking parameters are obtained through numerical analysis by using this index.

Numerical analysis method is fast and strong adaptability, facilitate the design scheme.

Numerical analysis of charged particle collection on charged droplets .

A finite element numerical analysis model of embedding pipeline is built by using ANSYS finite element analysis program.

Lastly numerical analysis is used to analyze the profits of both members in decentralized supply chain.

International Journal of Numerical Analysis and Modeling.

Numerical analysis with FEM of the deep foundation excavation.

Numerical analysis shows that CAL-MAC can reduce the delay and guarantee the energy efficiency.

In this thesis, the numerical analysis on the distribution properties of a SNOM fiber probe tip has been carried out.

Numerical analysis is also offered at last. We expect the thesis may have both theoretical and practical significance for OKP enterprises.

The stator structure feasibility is verified using the numerical analysis and experimental results.

Also, this article uses MATLAB and numerical analysis to analyze the key parameters.

This numerical analysis method gives an effective reference for die design.

Then importing the file as boundary conditions, and the numerical analysis of sound radiation is processed by software SYSNOISE.

I write the numerical analysis curriculum designs the source code, here is the value interpolation algorithm content.

The effect of neutral trap on tunneling current in ultrathin MOSFETs is investigated by numerical analysis.

Introduction to Applied Numerical Analysis, Hemisphere Pub.

Journal Mathematical Modelling and Numerical Analysis-Rairo.

Numerical analysis on flow field is the key to design an advanced torque converter.

In addition, his mathematical work also involves numerical analysis, probability theory and elementary number theory and other fields.

In resent years, through the development of computer technology, many researchers apply numerical analysis to engineering research.

The numerical analysis of aerodynamic performance on the large turning angles cascade with chord wise slots is carried out.

By theory and numerical analysis, expounded the vibration of wire electrode of HSWEDM machine tool.

According to the special mechanical behaviors of rock in deep tunnel, the strain-softening model is more suitable for numerical analysis.

The numerical analysis give us detailed information on steam turbine operation and it also provides usable data for strength analysis.

I write the numerical analysis curriculum designs the algorithm , here is the value fitting part .

In addition, the circularity estimated by a numerical analysis method is used as the benchmark for comparison.

SIAM Journal on Numerical Analysis.

According as above failure mode, a series of numerical analysis is accomplished based on finite element program ANSYS.

So, a practical alternative is numerical analysis, that is to develop mathematics models.

In this paper, a real engineering is used. A lot of numerical analysis work is done with global and local FEM.

The development of subsurface flow in soil slope due to rainfall infiltration has been studied with numerical analysis.

A numerical analysis of flora.

Because I now urgent need to download your website : numerical analysis and algorithm (XU Shiliang book) With book source.

Both numerical analysis and field tests have been performed to study the behavior of compressive and tensile piles in silty sand.

Computationally expensive code, such as numerical analysis, algorithms, and so on.

So, this paper also applies finite element numerical analysis to study radial stress of self-tight seal tube sheet of U-tube heat exchanger.

The initial mining method of ore-pillar recovery is showed. A numerical analysis has been conducted to study the initial mining method.

Numerical Analysis of the Behavior of Two - dimensional Separation Flow of a Turbine Last Stage Rotor Cascade at Large Negative Incidence

Experimental Measurement and Numerical Analysis of the Conductivity Signal Distribution for the Surface Ship's Wake

Numerical analysis shows that the state of flow in the channel is the primary influencing factor of the heat transfer;

Numerical Analysis of the Surface Notch Inspection by Laser Generated Rayleigh Waves on Aluminum Plate

Numerical Analysis on the Heat Flux Density of a Freezing Pipe with Constant Outer Surface Temperature

Numerical Analysis and Comparison of the Tip-Clearance Flow of a High-Loading Transonic Compressor

Study of An Open Slope Reinforcement Scheme and Numerical Analysis of Its Stability

A Numerical Analysis of the Duration up-to Simultaneous Action of Steel-Rope Loops for Bridge Pier

Shaking table test and numerical analysis for an isolated structure with small aspect ratio under earthquake inputs in two directions

Comparison of Tank Testing and Numerical Analysis for the Design of a Catamaran for Deck Installation by the Float-Over Method

Numerical Analysis of Bose-Einstein Condensation with Finite Number of Particles in a Two-Dimensional Harmonic Oscillator Potential

Numerical Analysis of the Wind Field on High Buildings

Numerical Analysis of the Erosion Characteristics of Solid Particles in the First Reheat Stage Blades of a Supercritical Steam Turbine

Numerical Analysis of Factors Having an Impact on the Wall Temperature of a Membrane Water-wall

Numerical Analysis of a Pure-spinning Elastohydrodynamic Lubrication Problem in Elliptical Contacts

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

The Numerical Analysis and Experimental Investigation for the Regulating Property of a New Electric Butterfly Gate

Numerical Analysis of A Three-Fields Model for A Quasi-Newtonian Flow Obeying the Power Law

Shaking table test and numerical analysis of a complex short- length shear wall-tube building structure with large openings in elevation

Numerical analysis of the varying law of tunnel surrounding soil displacement produced by shield tunneling

Numerical analysis on soil water and nitrogen transport considering spatial variability of hydraulic and mineralization parameters

Numerical Analysis of a Three-dimensional Turbulent Flow Field in a Centrifugal Impeller

The Numerical Analysis of the Moment and Analogy Method about the Three-dimensional Systematic Electromagnetism Field

Numerical Analysis of Dynamic Fracture of Interface Crack for a Functionally Graded finite Coating-Substrate Structures

Three-dimensional numerical analysis mechanical behavior of a constructing diaphragm wall panel

Numerical analysis of transportation and distribution of light non-aqueous phase liquids in partially saturated heterogeneous soils

Monitoring and Numerical Analysis for Construction Phase of a Steel-concrete Composite Continuous Box Girder Bridge

Numerical analysis of static stability of a preventing infiltration layer in a fly ash storing site

Numerical analysis and treatment of a collapsed middle drift for shallow multi-arch tunnel under unsymmetrical pressure

Numerical analysis of the enhanced convection heat transfer in an annular finned tube with laminar pulsating flow

Comparison of Experimental Measurements and Numerical Analysis of Out-of-surface Deformation around a Crack Tip

Numerical analysis of contaminant transport process through landfill considering nonequilibrium and nonlinear sorption behaviour;

Numerical Analysis of Finite Element Method of Composite Beam Made of Pre-stressed Steel High and Strength Concrete

Three-Dimensional Element Free Galerkin Method and Its Applications in Electromagnetic Field Numerical Analysis

Numerical analysis of the crack propagation in fiber sheet reinforced concrete specimen with a V-notch

Construction Simulation for Shield Tunnels and Numerical Analysis of Its Influence to Surrounding Environment

Quasi-Three-Dimensional Numerical Analysis of Steam Flow and Heat Transfer Performance of a Two-Pass Power Plant Condenser

Numerical Analysis of the Integration Stirling-Cycle Refrigerator Applied to Focal Plane Array Detector

Numerical analysis for formation time of bearing capacity of cast-in-place concrete pile in permafrost regions of Mohe County

A numerical analysis of the influence of a new tunnel construction on the safety of adjacent existing tunnel

Numerical Analysis Method for Investigating the Multiple Attractors Phenomenon and its Realization

Numerical Analysis of the Stress Field on Fiber-Reinforced Concrete Fracture Specimen with a V-Notch

Numerical Analysis of the Response of Buildings Close with Deep Foundation Pit as a Result of the Prestress Anchor

A Numerical Analysis to the Seal Characteristics of a Liquid Lubricated Spiral Groove Mechanical Seal

The Numerical Analysis and Experimental Investigation for Two Dimensional Nonlinear Wear Characteristics of the Cylinder Liner

Transmission Theory of Guiding-Center "Breathing" Soliton and Its Numerical Analysis

Numerical Analysis of the Temperature Crossover of a Multi-stream Plate-fin Heat Exchanger

Numerical analysis of the stress field on reinforced concrete fracture specimen with a V-notch

Numerical Analysis of Damage Elasticity of the Body with Jointed Cracks

Computational Methods For The Atmosphere And The Oceans: Special Volume (handbook Of Numerical Analysis): Special Volume

Numerical analysis of the flow field uniformity in the filter house of a nuclear air cleaning system

Numerical analysis of the soil-foundation-supporting pile-superstructure dynamic interaction system

Numerical Analysis of Heat Transfer Enhancement for a Cooling Channel Flow with Artificial Roughness

Alternating-Direction Finite Element Method For Malaria-Malaria Mosquito Model And Its Numerical Analysis

Numerical analysis of the scaling laws about focused beam spreading induced by the atmosphere

Numerical Analysis of the Transient Micro-EHL of Line Contact with a Single Asperity on a Surface

Numerical Analysis of the Growth Ecological Characteristics of Platycladus Orientalis in Shandong Province

Numerical Analysis of Temperature Field with Heat. Transfer of a Concentrated Heat-Resource

Experimental investigation of exterior performances and numerical analysis of flow field in a helix centrifugal pump

The numerical analysis of the multi-tooth contact in crown gear couplings and its experimental research

Numerical analysis of the distribution rule for suspended granule concentration in labyrinth integrated emitter

A Numerical Analysis of the Impact of Solidity on Bowed and Swept Cascade Flow Fields in a Transonic Compressor Cascade

Numerical analysis of influencing factors in stability of cracked surrounding rock of a laneway

Numerical Analysis and Study of Reinforcement Technology of Dry Jet Mixing Pile Combined with Geogrid

Experimental Study and Numerical Analysis of a Moving Mass's Vibration Suppression of a Cantilever Beam

Experimental Study and Numerical Analysis on the Factors Concerning the Ignition Time of Timber

Study on the numerical analysis of dynamic response for the sea bed soil under cyclic loading in Yellow River Estuary

Two-dimensional Numerical Analysis of Applying Baffles to Restraining the Combustion Instability in a Marine Engine

Numerical analysis on the internal flow of siphon discharge passages under off-design conditions

Numerical Analysis of the Multiple Tunneling Effects at A Metro Station Construction on Adjacent Bridge Piles

Numerical analysis about influence of tunnel construction on potential landslide body and its treatment

Numerical Analysis of Nonstationary Convection-Dominated Convection-Diffusion Problems

Numerical Analysis on Transmission Properties of Two-dimensional Photonic Crystal Using FDTD

Numerical analysis of flow in a lobed exhaust-ejector with a double-wall diffuser

Numerical analysis of a method for relieving welding stresses of girth-weld pipes with small diameters

Numerical Analysis of Vibrating Cascade Unsteady Aerodynamics and Its Application

Numerical analysis of motorbike profile modified gear forming and optimization of its mould structure

Numerical analysis for the elastohydrodynamic lubrication of involutes gear by a non-Newtonian medium

The Finite Element Numerical Analysis for A Class Generalized Nerve Conduction Equation

Numerical Analysis of the Dispersion Characteristics of Vehicular Pollutants in Exhaust Plume Under Idle Condition

Numerical analysis of the airflow motion in cylinder and its influence on the combustion process

Numerical Analysis of Non-steady Heat Transfer Problem with Phase Change in an Annular Cavity

Numerical Analysis and Experimental Validation of a Submerged Inlet on the Plane Surface

The Research of Modeling Methods for A Missile's Dynamic Characteristics Numerical Analysis

Numerical analysis of acoustic characteristic of muffler with complicated structure and structural optimization

The Neural Network Calibration of Seven-Hole Probe and Its Numerical Analysis of Manufacturing Deviations

Shaking table tests and numerical analysis for nonlinear seismic behavior of an arch dam model with contraction joints

Numerical analysis and experiment on the strength and life of the blisk with CFRP ring

Numerical Analysis of the Suddenly Effluent Water Influence on the Mechanical Behavior of the Lining Structure in Mountain Tunnel

Numerical analysis of total harmonic distortion of a loudspeaker in low frequency range

Application and Study of Numerical Analysis Method in Reservoir Storage Routing

Numerical Analysis of Power Flow of Single-layer Vibration-isolating System on Shipboard Base

Numerical analysis on bearing capacity of composite foundation in consideration of contacting characteristics of pile-soil interface

Numerical analysis on bearing capacity of composite foundation in consideration of contacting characteristics of pile-soil interface

Numerical analysis of combustion performance in an annular combustor with two-stage swirler

Summary of Numerical Analysis and Research for the Scattering Characteristics of Levitated Globular Reflector

The numerical analysis for the assembly stress in the local short fault of a vessel girth joint

Numerical analysis for the unsteady flow and casing treatment in a low speed centrifugal compressor

Numerical Analysis of Interaction between Underpass and Soil across the Railway

Numerical Analysis of Deformation of a Laser Surface Textured Mechanical Seal

Numerical Analysis of Flow and Experimental Investigation of Labyrinth Sealing Characteristics at Rotational and Static States

Numerical analysis of stress variation within geometrically unsymmetric samples before crack initiation

Numerical analysis of influences of bridge group to be constructed in Foshan City on river courses

Numerical Analysis of the Dispersion-Managed "Breathing" Soliton Transmission

Numerical Analysis of Flow Pattern and Optimum Calculation for the Upstream of Binhai Hydro Complex of the Waterway to Sea

The Discontinuous Deformation Numerical Analysis Method in Geotechnical Engineering

Study on Numerical Analysis and Experiment Simulation Approaches for Radiation Effects of Typical Optoelectronic Devices

Numerical analysis on thermal field and assessment on thermal fatigue life of material

Numerical analysis of the effects of different thermo-chemical nonequilibrium models on hypersonic nozzle flow

Numerical Analysis and Optimization of a Small Vehicle Heat Exchanger

Solitary Wave Solution and Its Numerical Analysis in a Nonlinear Elastic Bar

Numerical analysis and calculation of energy consumption and deformation of vertical tanks

Application of finite element-charge simulation combination method in electrostatic field numerical analysis

Numerical analysis of experimental observations for heat transfer augmentation by ultrasonic vibration

Numerical analysis of settlement characteristics of underlying soil layer of composite ground under flexible foundation

Elastoplastic numerical analysis and stability study of soil-nailed wall

Solid Adsorbent Bed Numerical Analysis and Enhanced Heat Transfer Technology for Adsorption Bed of Solid Adsorption Refrigeration

Numerical Analysis of Temperature Distribution of a High-temperature Fuel Cell in the Method of Weighted Residuals

Computer numerical analysis of electrokinetic injection in chip capillary electrophoresis

Numerical analysis of the magnetic field in permanent magnetic nonmetal-liquid electromagnetic pump

Numerical Analysis of Static Performance for Ultra Precision Spindle Supporting by the Aerostatic Bearing

Experiments and Numerical Analysis of Damage and Fracture Process on Plates with a Round Hole

Numerical Analysis of the Construction Scheme for Large-span Exit Section of the Pengshui Tunnel in Chongqing-Huaihua Railway

Numerical analysis on dispersion compensation characteristic of linearly chirped fiber gratings

Numerical analysis of stress deformation behavior of concrete diaphragm wall in supper-deep overburdened layer of Yele Hydropower Station

Numerical analysis of characteristic finite element difference method for water contamination problem

Numerical analysis and experimental verification of the Oxford-type split Stirling cryocooler

A Numerical Analysis of the Mechanical Capability of Hollow and Pre-stressed Concrete Slab with Mid-strength Spiral Rib Steel Wires

Numerical analysis of residual pore water pressure development and evaluation of liquefaction potential of seabed under wave loading

Numerical Analysis of the Ventilation of a Kitchen in Residence

Numerical analysis for the responses of a tunnel under earthquake

Numerical analysis of quasi-soliton propagation properties using dispersion compensation

Numerical Analysis of Transient Response Characteristics of Primary Surface Recuperators

Numerical Analysis to Influence of Turbocharging and Cylinder Diameter Enlargement on Piston Transverse Movement

Numerical analysis on hole coupling effects of an oblique incidence of electromagnetic pulse

Numerical analysis on the singularities of electromechanical fields in multi-layer piezoelectric actuators

Numerical analysis of an age-structured population model with space-limited recruitment

Numerical analysis of the dispersion of subwavelength diffractive microlens

Numerical analysis and simplified calculation method of temperature field about foundation of reinforced concrete chimney

Numerical Analysis of Influence of Karst Caves beside the Tunnel on Stability of Its Surrounding Rock Mass

Numerical analysis on high frequency characteristics of inner slotted rectangular waveguide grating slow-wave circuit

Experimental verification of numerical analysis accuracy of composite perforation

Numerical Analysis of Intensity Fluctuation Scale Characteristics in Space Laser Communication

Numerical analysis of differential sedimentation deformation of building around foundation pit

Numerical Analysis for Dispersion Characteristics of Quasi-Periodic Multi-Planar Dielectric Gratings

Numerical analysis on structural characteristics of saturated geogrid reinforced soil retaining wall

Numerical Analysis of Temperature Differences in Steam Turbine Cylinder during Start-Up and Shutdown

Numerical Analysis of Heat Transfer at the Tube Inlet Zone of a Heat Recovery Boiler

Numerical analysis of electrostatic field for a columnar capacitor

Three-dimensional numerical analysis for a cooling centrifugal fan

Numerical Analysis of Coupled Hydro-mechanical Processes in Deformed Fractured Porous Media During Tunnel Excavation

Numerical analysis of foundation improvement effect for expressway widening engineering

Numerical Analysis of the Aerodynamic Performance of an Airfoil with Round Ice

Numerical Analysis of Time-dependent Behavior of Interaction between Surrounding Rock and Supporting System

Distribution of Matrix Eigenvalue and Its Application in Numerical Analysis

Two-dimension Numerical Analysis of the Influence of Pile Foundation Induced by Adjacent Tunnel Excavation

Numerical analysis of near-field intensity distribution above complex samples with different polarization

Numerical Analysis on Thermal Blooming of Collimated Pulsed Laser Beams Propagating in the Atmosphere

Numerical analysis of unsteady viscous flow around actively deformed flexible airfoil for micro air vehicles under low Reynolds number

Numerical Analysis on Fracture Mechanics Parameters of Mechanical Heterogeneous Welded Joints

Numerical Analysis for a Round Turbulent Buoyant Jet in a Cross Flow

The Eleventh International Colloquium on Numerical Analysis and Computer Sciences with Applications

Numerical Analysis on Crack Propagation under Compressing Load by Displacement Discontinuity Method