of combustion

Example applications for this type of sensor would be in the measuring of combustion pressure in an engine cylinder or in a gas turbine.

It was the brilliant French Chemist , Antoine Laurent Lauvoisier , who eventually discovered the true nature of combustion .

Laoqu quietly withered and the moment the outbreak of combustion. although the results of the same. but the length of time. you choose.

The products of combustion and of industrial processing are contained with a confined air mass .

Besides, the matching stress between the strut and the bottom of combustion chamber is also very important.

Reaction to fire tests for building products - Determination of the heat of combustion.

Adopting high temperature of combustion air and relative large excess air ratio is an appropriate combustion mode for the furnace.

The heat transfer characters of combustion heat treatment furnace were discussed in this paper.

A vacuum pump pulled the products of combustion through the pipe and exhausted them outside at the end of the run.

The swirl intensity retention concept is introduced to evaluate the new shape of combustion chamber and its flow characteristics.

The absolute permeability has only a weak effect on them. The advancing velocity of combustion front is proportional to air injection rate.

The internal temperature of wood varies with the developing direction of combustion .

The units are completely self-contained and can be left unattended with no need for re-fueling or venting of combustion gases.

of combustion coal had seriously polluted atmospheric environment on winter, and offered evidence for atmospheric pollution treatment.

A new kind of combustion named high temperature air combustion with enriched oxygen content is applied into the billet heating furnace.

Prevention depends on adequate ventilation, with venting of combustion devices to the outside air.

The furnace-building technologies of combustion furnaces as the common equipments in chemical industry production are many and varied.

Acoustic characteristic of combustion chamber greatly affects the pressure variation of combustion process.

The valves are very important executive body in the gas combustion system and play a key role in the safety and efficiency of combustion.

Heats of combustion of foods and their relation to dietary requirements have been thoroughly studied.

The new technology of combustion in glass furnaces was introduced. These innovations improved the combustion mode and furnace structure.

The structural parameters of injector, the structural parameters and swirl ratio of combustion chamber were modified and optimized.

Different ways of combustion methods were adopted for analyzing variations of the dynamic parameters.

The secondary influencing factors of combustion noise mechanism under transient conditions of DI Diesel engines were studied.

A combustion instability detection method that uses the wavelet detail of combustion pressure fluctuations was put forward.

This then set up the dance of combustion and the nuclear annihilations that are related in the dream of earth.

In this paper, a mathematical model of combustion process for the gasoline rotary combustion engine was developed.

Safety against fire. Fire behaviour tests. Analysis of gases resulting of combustion or pyrolysis. Test chamber method.

Mafu fuel additives are catalytic and increase the rate of combustion of the fuel.

The device is an electromagnetic coil enwinding in the fuel channel of combustion engine.

Our participation in destruction also includes the pattern of combustion and nuclear annihilation.

The invention relates to a wide flame burner, pertaining to the field of combustion technology.

The results are valuable for the rational design of combustion train of generative ladle heating device.

Destroyed mormal steady combustion. The intensity of combustion pulsation have feed depressed and ensured combustion . . .

Describe the stoichiometry , chemistry of combustion, balances of mass and energy in combustion.

When compared directly to each other, biofuels do release fewer harmful pollutants as a result of combustion.

Fire can burn off silica-based substances; much like one ignites fossil fuels for the purposes of combustion.

Wall pressure distributions of combustion are measured and flame photographs of ultraviolet ray are got.

Ensure the manufacturability of combustion hardware and engine certification according to emissions legislation.

Before mixing with the products of combustion , the air is preheated.

the determinant of sintering permeability is the thickness of combustion zone and wet mixture zone.

That increases the completeness of combustion and neatly avoids the issue of degradation with time.

Oil dissolving and the fuel is good, prevent the sediment of combustion chamber from producing effectively.

Besides, we investigated the influence of fuel dilution of combustion products on flame let model.

The control quality of system of combustion control system is directly related to the safe and economic running of the power plant.

The test results show that the ozone has double functions of saving fuel and reducing emissions in the process of combustion.

Oil breakdown and corrosive products of combustion can cause bearing corrosion.

In addition, when fluorine mixtures are involved in a fire, the products of combustion can also be toxic.

On this basis, a design of combustion control system is proposed.

Based on the properties of combustion of droplets of a HAN-based liquid propellant LP1846, a simplified subarea model is presented.

At last, this paper analyzes the way of combustion control of decreasing NOX of combined cycle unit.

Long time behaviour of combustion systems is studied by the infinite dimensional dynamical system method.

A kind of combustion model of the constant volume combustion bomb fuelled by various components fuel was studied in this paper.

The relationship of combustion efficiency and pulverization coal size distribution by using the different kinds coal is studied.

Trim materials. Determination of linear speed of combustion.

Petroleum liquid fuels. Determination of heat of combustion.

Flame images are the most direct reflection of combustion.

Therefore I am interested in alternative forms of combustion and would be delighted to test drive the BMW Hydrogen 7 model.

No, in fact, a poor ring seal will allow an increase in the by products of combustion to contaminate the oil.

Based on the theory of combustion, a new additive to save energy has been studied and developed successfully.

There are few Ptolemaic astronomers left, or believers in the phlogiston theory of combustion.

The gas pressures of combustion are used to rotate the shaft.

Based on the wave theory, finite element theory and combustion theory, properties of combustion pressure oscillation in D.

'We think Naro exploded during the first stage of combustion. '

The way fuel is "atomised" has profound effects on the efficiency of combustion engines.

Influence of combustion reaction to the noise of jet flame was studied.

Circuit is another reason of combustion vehicles.

The combination of combustion method and other technologies is also under investigation.

The engine conveys the expanding power of combustion into rotary force in order to propel the vehicle.

Technical Retrofitting of Combustion System of No. 4 Boiler in Yangzhou Power Generation Ltd. Com.

The third stroke creates the power of combustion.

The way of combustion with CO2 O2 as combustion-supporting gas has been studied experimentally in the paper.

Life is simply a process of combustion.

Fire is a process of combustion.

Study on the Dependent-Time Law of Thermal-Physics Parameters of Combustion in Fullscale Tunnel Fire and Simulation of It

Implementation of A High Frequency Measuring System for the Testing of Combustion Instability Study of Tripropellant Rocket Engine

Temperature Distribution of Combustion Flame in the Gasoline Engine by Means of Two-Color Method

The evaluation on the condition of combustion chamber by checking the liner scavenge port of ME

Experiment Result of Combustion Test from Replaced Raw Coal by Rice Husk Sticks and the Benefit of Environmental Protection

Effects of Combustion Chamber Parameters on Combustion and HC Emissions of a Small Diesel Engine at Sudden Load-up Operating Conditions

Study of Dynamic Thermoelastic Stresses within Components of Combustion Chamber for Internal Combustion Engine

Resident Time of Combustion Products and its Effect on Carbon Content in Fly Ash in Pulverized Coal Fired Boilers

Effects of Combustion Chamber Shape of the Direct Injection Type Diesel Engine on the Air Current Movement and the Emission Characteristic

Study of the mathematical model and computer control of combustion process in reheating furnace

Measuring the Resonance Energy of Benzene by the Way of Measuring the Heat of Combustion

Analysis of Availability and Irreversibility Rate of Combustion Process in a Gasoline Engine

Analysis of Combustion Process and the Heat Release in a Low Emission Diesel Engine

Study of Combustion Model for Appliance on Spark Ignition Engine Fuelled by Various Components Coal Bed Methane

The Temperature Oscillation and Alternating Thermal Stress in the Wall of Combustion Chamber of Diesel Engine

Calculation and Analysis of Combustion and Emission of a Diesel Engine with High Pressure Common Rail System

Spectrum Evolution of Combustion Ultrafine Particles Acoustic Agglomeration Simulated by Numerical Algorithm

The Application Study of Combustion Control Strategy for Regenerative Furnace

An Experimental Study on the Optimization of Combustion Parameters of a Dual Air-Register Burner Boiler

An Investigation on Radiation-Intensity-Based Temperature Measurement of Combustion Process--Theory, its Digital Emulation and Experiment

The experimental study of combustion status in the entrained-flow gasifier by digital image processing

Measurement of Thermal Boundary and Influence of Combustion Flame on Thermal Boundary of Combustion Chamber Wall in a Diesel Engine

Experimental research and computation analysis of combustion kinetic characteristics of micro-pulverized and common-pulverized coal

A Study of Combustion Technology Featuring the Pulsating Feed of Fuel and the Influence Exerted by Various Parameters

Analysis of Combustion Characteristics for Liquid Propellant Electrothermal Chemical Launcher

Experimental study of combustion geometry on combustion and emissions of diesel engine

The experimental study of dynamic parameters of combustion reaction of pulverized coal

Influences of Combustion Boundary Conditions on Ethanol Homogeneous Charge Compression Ignition Combustion

Experimental Investigation of Combustion Characteristics With and Without Exhaust Gas Dilution in the Constant Volume Combustion Chamber

Visible Study of Combustion Under Supercharging in a DI Diesel Engine

Numerical Simulation of Combustion Processes in an Ultra Supercritical Boiler

Experimental Study of Kinetic Parameters of Combustion Reaction of Blended Coals

Investigation of combustion in a porous medium for different reaction mechanisms and dispersion effects

Influence of Combustion Desulphurization on NOx Emission and Thermal Efficiency of Circulation Fluidized Bed Boiler for Fujian Anthracite

Relation Between the High-Frequency Oscillation of Combustion Pressure and Combustion Noise of DI Diesel Engine

Numerical analysis of combustion performance in an annular combustor with two-stage swirler

Numerical simulation of combustion of rectangle burner used in baked aluminum reduction cell

with the increase of combustion temperature, the sulfur retention rate of coal gangue and activated fly ash decline;

A Study of Combustion Characteristics of Nitramine Propellants

Measurement of combustion cyclic variation and its evaluation in a gasoline engine using the optical method

Visualization Technology of Combustion Photoelectric Measurement in Engine Cylinder

Characteristics of Combustion Instability in a Narrow Combustion Cylinder

Effects of combustion chamber structure on combustion and flow of hybrid rocket motor

Effect of Combustion Parameters on Diesel Engine Smoke Opacity under Constant Torque and Increasing Speed Transient Operating Conditions

Investigation on Characteristic Parameters of Combustion Variation between Cycles in Gasoline Engine

Research on Desulphurization Function of New Model Device Purifying Smoke Gas of Combustion Coal

Effect of Combustion Parameters on Diesel Engine Smoke Opacity Under Constant Speed and Increasing Torque Transient Operating Condition

Numerical Simulation of Hardening Process in Intermediate Frequency of Combustion Engine Crankshaft

A CFD Study of the Effect of Combustion Chamber Passage Configuration of Engine on the Current Motion

Calculation Method and Program of Thermodynamic Properties of the Products of Combustion of Biomass Fuel Gas with Air

Heat Transfer Simulation of Combustion Chamber Components Coupled System Under Transient Condition

Analysis of Combustion Process of Hydrogen-Air Mixture in a Constant Volume Vessel by Optics Schlieren Photography

Real Time Diagnostics of Instantaneous Temperature of Combustion and Explosion Process by Modern Spectroscopy

Laser-induced fluorescence spectra measurement of combustion product components

Crankshaft vibration study of combustion engine

Asymptotically stability of a class of combustion systems

Numerical evaluation for resistance-damage ability of aluminum structure under attack of combustion shrapnel

Research on Emission Characteristics of Combustion Pollutant in Coal-Pulverized Boiler Mixing Petroleum Coke

Characterization Methods of Combustion Properties of Aluminum-magnesium Fuel-rich Propellant at Low Pressure

Prospective Research Progress of Combustion Technology for Circulating Fluidized Beds

Experimental Analysis of Combustion Noise and Mechanical Noise Contribution for Motorcycle Engine

Re search of simulation on the predicting remain life time of combustion engine

Influence of Combustion - Supporting Flue Gas to Waste Incineration Combustion - Supporting Air Supply

Technical report of a system of combustion and emissions at low load condition with intelligent

Comparison of dynamic characteristics of combustion engines with symmetric and offset crank-slide mechanism

Application of Combustion-Supporting Technology by Local Oxygen-Film Enrichment in Pulverized Coal Fired Boilers

Introduction on the fuel gas dechlorination system of combustion straw power plant and its study and application

Research for Application and Developing Trend of Combustion Synthesis Ceramic Coating Technology

Calculation Investigation on Influence of Combustion Chamber Profile on Combustion Process

Secondary Influencing Factors of Combustion Noise Mechanism under Transient Conditions of DI Diesel Engine

Numerical Simulation and Optimization of Combustion's Operation Conditions of Pulverized Coal Fired Boiler

Optical visualization of combustion characteristics of diesel engine fueled with ethanol-diesel blend fuel

Fiber Sensor and Measuring System for Studying the Influence of Combustion Flame on the Thermal Boundary in Cylinders of Diesel Engine

Principal component analysis method of combustion reaction kinetic mechanism reduction

Numerical simulation of combustion and pollutants emission about instantaneous gas water heater

Numerical simulation of combustion process in DI diesel with the secondary injection by combustion chamber wall

Burning stability analysis of micro-combustion and experimental research of combustion in microscale tube

Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Intermediate Precision Method)

Analysis of Combustion Cyclic Variations in a Supercharged Diesel Engine

Application and related thoughts for composites of combustion chamber crust on large scale solid missile engine abroad

Revision on Calculating Model of Combustion Heat Release Rate for Gasoline Engines Under Transient Conditions

Temperature distribution measurement of combustion wave for solid propellant

Ionization Effect in Flame and Temperature Measurement of Combustion Process in the Internal Combustion Engine

Engineering Forecasting Model of Combustion Efficiency for Pulverized Fired Boiler

Numerical Simulation of Combustion Characteristics of Burners with Plasma Ignition

Study on Influence of Combustion Characteristics on a Quasi-homogenous Lean Burn Gasoline Engine

Diagnosis and Adjustment of Combustion in an Industrial Boiler

Material Balance and Calculation of Combustion Efficiency in Circulating Fluidized Bed Boiler

The Catalytic Action of Combustion Catalysts in Solid Propellant with Uniform Design and Regression Analysis

Monitor and Performance Analyze of Combustion Instability Parallel Program in Liquid Rocket Engine

European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types)

Development and Application of Combustion Analyzer for Internal Combustion Engine

Characteristics of burning remnant and examination of combustion-supporting agent

Study on High-Frequency Pressure Oscillation of Combustion Pressure through Wavelet Analysis

Research of Combustion Efficiency of Combustors Using Hybrid Airblast Atomizer under Low Pressure

Study on General Combustion Performance and Kinetic Characteristics of Combustion of Coal Residue

Numerical Simulation of Combustion Characteristics in Utility Boiler

Study on thermoanalysis experiment of combustion characteristics of blended coal

Applications and Prospects of Laser Measurement Technology on Research of Combustion Engine

Crude petroleum and petroleum products - determination and estimation of heat of combustion

Mathematical Model of Combustion Fraction for Dense Phase in Circulating Fluidized Bed Combustor

The Effect of Combustion Chamber Shape on Thermal and Mechanical Loads of a Diesel Engine Piston

An Experimental Study on Diesel-Methanol-Water Composite Emulsified Fuel and the Calculation of Combustion Process

The Preliminary Discussion of Combustion in Internal - combustion - engine with Fuel of Low Cetane Number

Effect of combustion inferior coal on boiler's safe operation and its countermeasure

Study on the preparation of green aluminate long afterglow phosphorescent materials used the method of combustion

Numerical simulation of combustion in a yellow-phosphor burning tower

Research of Combustion Control System Applied to Stirling Engine

A Resonance Analysis of Combustion Pressure Oscillations in a DI Diesel Engine

Narrow Band Model Parameters of High Temperature Radiation for Carbon Dioxide of Combustion Products

Spontaneous Raman scattering diagnostics of combustion

Research and Application of Combustion Process Temperature Optimal Control System for Coke Oven

Solution Scheme of Combustion Optimization Based Upon Coal Quantity Measurement

Investigation on Fractal Characteristics of Flame Surface of Combustion in an Engine

Experimental Research on the Comprehensive Behavior of Combustion for Soft and Brown Blending Coals

Experimental Research on the Promotion of Combustion in Diffusion Flames by Gradient Magnetic Field

Numerical Simulation of Combustion for DME Used in Diesel Engines

Study on the Optimization of Combustion and Practical Application of Automatic Control Systems

Experimental Investigation on Active Control of Combustion Instability on Cold Model

Digital Calculation and Research of Combustion Heat Release Rate for Divided Chamber Diesel Engines

Study on Laws of Combustion System Parameters Affecting Performance in Swirl Chamber Diesel Engines

Temperature Control for the Overhaul of Suspended Ceiling of Combustion Chamber in Coke Oven

Study and application of combustion control algorithm for Regenerative Furnace

The theory and distributing way of combustion supporting in burning coal furnace

Analysis of Two Air-Fuel Ratio Regulating Methods of Combustion System

Computational Models of Combustion Gas Products'Radiative Property

Experimental Study and Analysis of Combustion Noise in DI-Diesel Engine under Transient Conditions

The Experimental Study of Combustion Control Based on Furnace Radiant Energy Signa in Once-through Boiler

Estimation of Combustion Pressure Distinction Between CylindersUsing Transient Speed of Flywheel CylindersUsing Transient Speed of Flywheel

Analytic appraisal technology of combustion supporting agent, ethanol in residue at fire site

The reconstruction and temperature control of combustion chamber of directed fired dryer

Research and Application of Combustion Method Used Two Kinds Fuel on the Same Regenerative Heating Furnace

Processing of the Complex Contour for the Inner Wall of Combustion Chamber

Study on starting parameter synchronous measure technique of combustion motor

Photoelastic Analysis of Combustion Chamber of Solid Propellant Rocket Engine

Presentational Regulations of Combustion in Propellant of Gun-Boosted Missile

Discussion about Flame Temperatures of Combustion Reactions

Numerical Simulation of Combustion Chamber and Nozzle Flow in Classical Hybrid Rocket Motors

Design of combustion optimization control system for powerplant boilers

Effect of In-Cylinder Swirl Characteristics on Cyclic Variation of Combustion Pressure in Gasoline Engine

Study on characteristic of combustion of converting polypropylene

Improve the Peak Load Regulation by Decreasing Consumption of Combustion-supporting Oil

Numerical investigation of combustion process in plasma generator

Decoupling Design of Combustion Control System for Circulating Fluidized Bed

Experimental Study on Comprehensive Behavior of Combustion of Soft Blending Coals

Study on characteristics of combustion of municipal solid waste with thermal analyzers

Intelligent classification control of combustion system of industrial boiler

Bifurcation Analysis of Combustion Characteristics of Hydrogen in CSTR

Realization and exploration of combustion control system of regenerative heating furnace

Isolation and Identification of Combustion Improver in Cigarette Paper

Numerical Simulation of Combustion Process of Concentric Burning Apparatus

Study on Heat Efficiency of Combustion of Heavy Oil in Anode Furnace for Copper Refining in Phases of Oxygenation

A Research on the Characteristics of Combustion Pressure Fluctuation in Diesel Engine

Experimental Study on the Comprehensive Behavior of Combustion of Blending Coals

Experimental Investigation of Combustion Performance of U-Type Flame Holder

Three-Dimensional Numerical Simulation of Combustion Process in Oil Furnace

Toxicity assessment of products of combustion of flexible polyurethane foam

Review of combustion instability testing research on liquid propellant rocket engine

An analysis of the boundary conditions in the atomization process of combustion engine fuel jets

Fault Diagnosis of Combustion System for Diesel Engine Based Genetic Programming

Numerical simulation of combustion and nitrogen oxides generation process in tangentially fired furnace

The Research and Its Development of Combustion Noise of Internal Combustion Engine

Research On Controlling Efficiency Of Combustion Of Industrial Boiler

Assessment of Combustion Performances of decabromodiphenyl ethane Flame Retardant ABS

Influence of Combustion Chamber Geometry on In-cylinder Flow Field and Engine Performance

The design and application of energy-saving control system of combustion in al kali recovery

Identification of Diesel Engine Cylinder Pressure and Timing of Combustion

Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels

Experimental Research on the Municipal Waste Combustion and Development of Combustion Equipment

Multiobjective evolutionary algorithm applied in design of combustion optimization control system of utility boilers

Multi-Regression Analysis of the First-Level Influence Model of Combustion Noise

Investigations of Combustion and Exhaust Emissions of Biogas and Diesel Dual-fuel Engine

Research and Application of Combustion Control for Annealing Furnace

Research on the characteristic of combustion for the straw and straw mixing with coal

Development of Combustion System of a Mono-cylinder Diesel Engine with Duel Fuel Injector

The Microcomputer Auto-control System Applied in the Experiment to Measure Heat of Combustion