non-destructive

Non-destructive testing - Ultrasonic examination - Part 4 : examination for discontinuities perpendicular to the surface.

It has practical significance for study non-destructive testing equipment and technical means of pavement concealed defect.

Magnetic particle testing is a non-destructive testing method for detection of imperfections on or just below the surface of ferrous metals.

The quantity, locations and quality level of non-destructive inspections shall be agreed upon by the ship inspection and design authorities.

Ultrasonic testing is one of the most important non-destructive testing techniques, widely used in various fields of industrial production.

The difficulties associated with post weld heat treatment are also described, as well as the non-destructive testing limitations.

A CCD, a computer and a traditional microscope are combined to realize the non-destructive microscope observation of specimens.

Thoughts of destruction are the most likely to surface as the new sweet music earth is moving into is non- destructive in nature.

The non-destructive testing of reinforced-concrete is an important mean for the concrete quality monitoring, diagnosis and assessment.

Non-destructive testing. Industrial radiographic illuminators. Minimum requirements.

NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. IDENTIFICATION CARD FOR RADIOGRAPHIC PAPERS USED WITH FLUORESCENT INTENSIFIER SCREENS.

SHIPBUILDING. MARINE PAINTS. NON-DESTRUCTIVE ON-SITE MEASUREMENT OF THE THICKNESS OF COATINGS ON A METAL SUBSTRATE. REQUIREMENTS.

"The ultimate goal is to come up with a quick, efficient, cost-effective and non-destructive way to evaluate mineralisation, " he says.

paints and varnishes . measurement of dry film thickness . non - destructive method with a magnetic flux.

NON DESTRUCTIVE TESTING. INFRARED THERMOGRAPHY. VOCABULARY CONCERNING THE DESIGNATION OF THE EQUIPMENT.

nuclear energy . nuclear fuel technology - waste . assessment of radionuclides by non destructive measurement of radionuclide travers.

non-destructive evaluation; thermal properties measurement and semiconductor material evaluation are each reviewed.

This article discusses non-destructive methods for testing fruit quality, mechanizing and automatic technologies for fruit classification.

This advanced non-destructive technology generates high-resolution, three-dimensional images of buried objects and natural interface layers.

Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2 : verification of operating characteristic.

NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.

Laser absorption spectroscopy is an optical measurement method for rapid and non-destructive gas analysis.

Should be able to interpret weld X-rays and other common non-destructive test results.

Ultrasonic detection is a non-destructive technique that provides information about food physical-chemical properties.

The systematic testing of components or equipment during manufacturing makes this non-destructive condition mandatory when testing a sample.

Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds.

Non destructive testing. Infrared thermography. Methods for characterization of equipment.

Conventional non-destructive detection technology is characterized by heavy workload, long downtime and easy missing defects.

CT technology, as the most advanced non-destructive detection technology, has a unique advantage in the rock mechanics experiments.

NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. EXAMINATION OF COMPOSITE MATERIAL PARTS AND STRUCTURES. MATRIX FIBERS.

Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.

Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions.

Laser holographic interferometry is used for non-destructive test of the welded dots on PCB.

Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1 : equipment description.

The X-CUBE is a compact X-ray CCD camera using a commercial CCD chip and is designed for non-destructive inspection.

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3 : combined equipment.

The advantage of this new method features a non destructive measurement.

Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage.

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1 : instruments.

CCB Cultural Centre WORK PERFORMED: Inspection and non-destructive testing of metallic structures, Lisbon, PORTUGAL.

Supplies custom made automated non-destructive testing and measuring systems for industrial applications.

NON DESTRUCTIVE TESTING. VOCABULARY USED IN ACOUSTIC EMISSION.

The results show that real-time digital holographic method is a high-precision, non-destructive, the audience of the detection method.

Non destructive examination is performed by qualified sub contractors in accordance with pre- approved procedures.

Ultrasonic testing can solve the problem of non-destructive testing of adhesive quality of the adhesive interface effectively.

Non-destructive testing - Acoustic emission - General principles.

Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.

Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds.

Non-destructive testing. Terminology. Part 3 : terms used in industrial radiographic testing.

This course introduces the application of civil engineering at the non-destructive testing technology.

NON DESTRUCTIVE TESTING. ACOUSTIC EMISSION. COUPLING OF PIEZOELECTRIC SENSORS.

Objective To establish a sensitive, accurate, non-destructive method for determining writing sequence of black ball pen.

Through core sampling method, it verify the non-destructive testing of ground penetrating radar has good practicability.

I can express my feelings, beliefs and thoughts and defend them in a non-destructive way.

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.

good sanitary towels should be clean surface, uniform thickness, and non-destructive sealed.

Non-destructive testing - Eddy current testing - General principles and guidelines.

Non-destructive testing - Ultrasonic examination - Part 5 : characterization and sizing of discontinuities.

Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.

Safety Testing Systems testing systems of building, safety, non-destructive engineering.

Elevator links are surface hardened by special heat treatment and are tested strictly by non-destructive evaluation(NDE).

Aerospace series - Qualification and approval of personnel for non-destructive testing.

Non-destructive examination of welds - Radiographic examination of welded joints.

The measurement of PD is a common non-destructive effect testing method to monitor the defect existing in the insulation system.

Non-destructive testing - Visual testing - General principles.

X-ray CT plays a great role in industrial non-destructive tests, medical fields, and public security, etc.

Radiation protection. Installations for industrial gamma radiography for non destructive testings.

Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.

Non destructive testing - Terminology - Part 4 : terms used in ultrasonic testing.

In this article, basic principles and applications of some important laser-based non-destructive testing techniques are summarized.

Non-destructive testing of steel forgings. Part 4 : ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings.

Non-destructive examination of welds - Magnetic particle examination of welds.

NON DESTRUCTIVE TESTING. RECOMMANDED PRACTICES FOR THE LOCALIZING OF ACOUSTIC EMISSION SOURCES.

Non-destructive testing - Visual testing - Equipment.

Non-destructive testing. Terminology. Part 8 : terms used in leak tightness testing.

Non-destructive testing - Leak test - Calibration of gaseous reference leaks.

Non-destructive testing - Terminology - Part 10 : terms used in visual testing.

Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels.

Non destructive testing. Tightness testing. Testing by accumulation or sniffing of gas.

Non-destructive examination of welds - General rules for metallic materials.

Non-destructive testing. Terminology. Part 5 : terms used in Eddy Current testing.

GXT Mode on-line non-destructive defect detector for wire ropes is made on the basis of the magnetic dispersion crossing-link principle.

Non-destructive examination of fusion welds. Visual examination.

Non-destructive testing - Leak testing - Pressure change method.

X-ray fluorescence technology is fast, accurate, non-destructive character.

Since its establishment in 1949, the pool-independent KARL DEUTSCH company develops products for non-destructive testing (NDT).

This innovative tool utilizes the world's first patented non-destructive testing method for concrete properties.

International pressure vessel welds for testing is the most widely used non-destructive testing.

Non-destructive examination of weld- General rules for metallic materials.

This paper introduces the principle of non-destructive ration examining device for TCK wire rope.

All editing is non-destructive and will not change the source file unless required.

Lifting and handling. Welded joints. Part 2 : weld quality classes. Extent of the non-destructive testing.

Non-destructive testing - Ultrasonic examination - Part 2 : sensitivity and range setting.

Improving and ensuring non-destructive testing plays an important role in product output.

PLAIN BEARINGS. METALLIC MULTILAYER PLAIN BEARINGS. PART 3 : NON-DESTRUCTIVE PENETRANT TESTING.

Non-destructive thickness measurement of coating layers.

Testing concrete in structures - Part 2 : non-destructive testing - Determination of rebound number.

4% for non-destructive flaw detection test sampling design and not below the standards require that the test results recorded.

Results indicate that CT scanning is a promising, non-destructive method for characterizing macropores in soil.

Non-destructive testing of steel forgings. Part 3 : ultrasonic testing of ferritic or martensitic steel forgings.

Brazing - Non-destructive examination of brazed joints.

Non-destructive testing - Magnetic particle testing - Part 1 : general principle.

Photon Induced Positron Annihilation (PIPA) is a new non-destructive test method that can detect weakened areas where flaws can develop.

Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials.

Non-destructive testing - Leak testing - Tracer gas method.

Non destructive testing - Ultrasonic testing of steel bars.

Non-destructive testing. Image quality of radiographs. Part 3 : image quality classes for ferrous metals.

Non-destructive test is an important way to ensure industry safety and improve quality of products.

Non-destructive testing - Magnetic particle testing - Part 2 : detection media.

Compared to the real aircraft, the flight simulator is controllable, non-destructive, economic and other advantages in flight test.

non-destructive testing after final machining .

Non-destructive testing. Image quality of radiogaphs. Part 1 : image quality indicators (wire type), determination of image quality value.

Non-destructive testing - Penetrant testing - Part 4 : equipment.

Qualification or knowledge in non-destructive test.

Based on non-destructive testing system for turbine blade, propose a resolution enhancement approach for X-ray DR digital image.

The method for checking quality of agricultural products based on the color feature is a rising non-destructive means.

This paper studies the non-destructive ways for checking quality of the Nanguo pear.

In this paper, research on non-destructive testing of wire rope's actual needs.

This led him back home, to a master's program at Central University of Venezuela in non-destructive testing.

Non- destructive testing of steel tubes - Qualification and competence of level 1 and 2 non- destructive testing personnel .

A kind of non-destructive testing system is developed for inspecting a large quantities of sphere-head shaft automatically.

Ultrasonic examination equipment is used widely as a non-destructive test equipment.

Its compact and lightweight design supports a new level of non-destructive inspection.

It is non-destructive and uses CO2 detection technology, eliminating the need for costly helium testing.

Non-destructive testing of steel forgings. Part 2 : penetrant testing.

It can provide non-destructive testing. This instrument will not cause any damage to the tested products.

Basic knowledge in non-destructive test.

AVITricks Video Editor : AviTricks is a non-linear, non-destructive AVI video editor with real-time preview.

Basic knowledge of non-destructive materials testing.

and in earthen sites disease survey, a modern acme non-destructive analytical techniques and so on high tech have few section applications.

We now need to apply some non-destructive edits so both models match.

This paper designs an acoustic non-destructive inspection system based on embedded Sunplus SPCE61A single-chip microcomputer.

The development of a model for leaf area estimation requires a non-destructive method which is reliable and rapid.

Readout is non-destructive because the charge remains intact in the pixel after the signal level has been determined.

Vendors performing sub contract Non destructive examination including ASNT-SNT-TC-A level 2 and 3 qualification.

There are non-destructive testing equipment testing equipment 9, 18 physical and chemical test equipment.

Neutrons are particularly useful because they can penetrate deep into matter, while remaining non-destructive.

Non-destructive testing - Ultrasonic examination - Examination for discontinuities perpendicular to the surface

a list of equipment used for mechanical testing, metallographic examination, non-destructive testing and measurement of dimensions

A study on the Non-Destructive Model for Estimating Individual Age of an Endangered Plant Changium Smyrnioides

Non-destructive testing - Acoustic emission - Equipment characterization - Verification of operating characteristic

Non destructive testing - Eddy current examination - Equipment characteristics and verification - Probe characteristics and verification

Non-destructive testing; Liquid penetrant inspection; Means of verification

Non-destructive testing - Acoustic emission - Equipment characterization - Equipment description

Study and application of non destructive methods used to determine quality of fruit and vegetables

Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Instruments

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Combined equipment

Non-destructive testing; stress concentration zone; magnetic flux leakage testing; finite element simulation; magnetostrictive effect;

Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values

Non-destructive testing - Ultrasonic examination - Characterization and sizing of discontinuities

Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Probes

Non destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values

Non-destructive testing; electromagnetic methods; representation and general characteristics of test coil assemblies

Infrared Thermography Non-destructive Testing Technology and Its Applications

Acoustic Emission Testing Technology and Its Application Prospect in Non-destructive Testing of Wood Materials

Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles

Non-destructive apple bruise detection with Raman spectroscopy and its virtual instrumentation

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method

Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors

Specification for minimum requirements for industrial radiographic illuminators for non-destructive testing

Non-destructive testing - Ultrasonic inspection - Evaluation electronic characteristics of untrasonic test instruments

Identifying Method and Circuit of Welding Line of Canister in its Ultrasonic Non-Destructive Testing System

Non-Destructive Detection Technique of Anchorage Quality of Anchor Bars and Its Application to Tan-Shao Expressway

Sensitivity Analysis for the Infrared Non-destructive Inspection of Electro-thermal Carbon Fiber Reinforced Concrete

Non-destructive testing - Terminology - Terms used in ultrasonic testing

Research on using combination of non-destructive test and dead load test to determine actual bearing capacity of bridge in service

Non-destructive testing - Acoustic emission inspection - Primary calibration of transducers

Non-destructive testing - Image quality of radiographs - Image quality indicators (wire type) - Determination of image quality value

Non-destructive testing - Ultrasonic examination - General principles

Analysis on the Principle of the Non-destructive Detection for the Compactness of Roadbed with Rayleigh Wave Method

Simulating and Analyzing the Electromagnetism Noise Disturbing in Ultrasonic Non-Destructive Detecting System

Study of a fruit non-destructive detection system based on dielectric properties

Non-destructive Quantitative Analysis of Isoniazid Tablets by Near Infrared Spectroscopy with Radial Basis Function Neural Network

Non-destructive testing of steel forgings - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings

Advanced non-destructive inspection equipment and its application in water projects

Study on Mineralogical Characteristics of Turquoise Samples from Different Provenances by Non-destructive Analysis

Magnetostrictive Transducer for Non-Destructive Evaluation of Pipes Using Circumferential Guided Waves

Non-destructive testing - Image quality of radiographs - Experimental evaluation of image quality values and image quality tables

Application of Wavelet Analysis and Artificial Neutral Networks to Flaw Classification in Ultrasonic Non-destructive Testing

A Non Destructive and Continuous Measurement for a Drying Process of Foods Using Dielectric Properties

Non-destructive testing - Metallographic replica techniques of surface examination

Non-destructive testing - Ultrasonic inspection - Vocabulary

Study of infrared thermography in non-destructive testing of building finish

Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch

Non-destructive testing - Terminology - Terms used in eddy current testing

Non-destructive testing; penetrant flaw detectors; general technical requirements

Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels

Non-destructive examination and estimation of radioactivity levels for decorative building materials

Non-destructive testing; impression methods for surface examination (Replica-technique)

Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method

Analyzing and Suppressing of the Noise Disturbing in Ultrasonic Non-destructive Detecting System

Non-destructive testing - Ultrasonic examination - Sensitivity and range setting

Implants for surgery; non-destructive testing; liquid penetrant inspection of metallic surgical implants

Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction

Laser Ultrasonic Technique and its Applications in Non-destructive Testing

A set of standard samples suitable for non-destructive analysis of ancient ceramics;

Magnetostrictive-based Longitudinal Guided Wave Transducer for Non-destructive Evaluation of Pipes

Technological Research on Appraising Bituminous Pavement Segregation by Non-destructive Test

Non-destructive determination of sugar content of crystal pear using near infrared transmittance spectroscopy

Non-destructive testing and evaluation methods for internal quality of fiber-reinforced composite ceramic products

Non-destructive testing - Ultrasonic thickness measurement

Non-destructive testing - Magnetic particle testing - General principles

Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method

Non-destructive testing techniques used in drilled pile foundation

The Applied Research of Remote-field Eddy Current-based Non-destructive Inspection Technology at a Power Plant

Welder and non-destructive testing personnel must have relevant certificate of competency;

Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination

Study on Application of Non-destructive Detection Technology in Slope Reinforcement Quality Inspection

Raman Micro-spectroscopy as a Non-destructive Technique for Stone Axes of New Stone Age

Application of the non-destructive measuring method on concrete quality measurement

Research Strategy and Application of Vibration-Based Non Destructive Structural Damage Detection

Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products

Testing concrete in structures - Non-destructive testing - Determination of rebound number

Non-destructive testing of tunnel shotcrete strength and its application

Extent of NDT to be carried out as per fabrication and welding specification, extent of non-destructive examination and weld NDT DWG. NDT

non - destructive testing - penetrant testing - equipment

Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method

Research of Character Pick-up and Graph Reconstruction of Crack in Infrared Non-destructive Testing

Non-destructive testing - Penetrant testing - General principles

Application of Near Infrared Spectra Technique for Non-destructive Measurement of Fruit Internal Qualities

Simultaneous and non-destructive determination of plasticizers in PVC applying partial least square method

Application analysis of several non-destructive testing techniques in quality testing of impermeable walls

Study of non-destructive test techniques for cement-soil anti-seepage walls

Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties

Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements

Advances of Non-destructive Analysis Techniques of Raman Spectrometry and Infrared Spectrometry

Non-destructive testing - Guidelines for NDT personnel training organizations

Research on Automatic Non-destructive Testing System for Transverse Defects and Longitudinal Defects of Oil Well Tubing

Discussion on the conception of non-destructive inspection reliability for offshore structures

Non-destructive testing - Qualification and certification of personnel

The Laser TV-holography Technique And Its Application In Non-destructive Testing

Application of phase difference holography non-destructive detecting system to tire inspection

Portuguese Army WORK PERFORMED: Pipeline inspection and non-destructive testing, PORTUGAL YEAR

Application of Multi-resolution Analysis in Detection of Rock Anchor Bar Quality Using Elastic Wave Non-destructive Method

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems

Non-destructive testing - Magnetic particle testing - Equipment

Study on applicability of transformer equivalent circuit in eddy current non-destructive evaluation

Non-destructive testing - Penetrant testing - Testing of penetrant materials

Wavelets Transform and Its Application in Eddy Current Non destructive Test

Non-destructive testing of steel forgings - Ultrasonic testing of ferritic or martensitic steel forgings

Non-destructive inspection by supersonic wave and its application

The Application of Non-destructive Inspection Using X-ray Imaging in Internal Quality of Agriculture and Poultry Products

Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys

Study on Non - destructive Measurement of Nectarine Firmness Qualities using Spectral Imaging

Application of wavelet-based image enhancement method in radiographic non-destructive testing

Non-destructive testing of metals by ultrasonic inspection under low temperature environments in North China

Non-Destructive Test Technique Applied to Concrete Quality Control