mould

Look, these neatly lined terra cotta warriors seem to be made with a single mould.

Casting by mould has been used for thousands of years.

In engineering field, the engraving of Chinese characters, letters or other figures on workpiece or mould is often encountered.

When the clay was in place, it had to slowly dry for a few days to get firm enough to keep its shape when I took it out of the mould.

Once the five days is up, the mixture is popped out of the mould, dried, and can then be used for any purpose.

the prepared mould can be used for preparing the micro needles by a centrifuge method and a suction method.

I hate the way you're always trying to mould me into something you want me to be.

He made an attempt to break the mould of British politics.

He looked at it closely, and saw that microbes around the mould had been killed.

Especially mould opening with automatic system , and mould stroke get bigger , easy to take the products and gate .

In the function of injection pressure, the mould which has core will produce a little core offset and cause plastics deformation.

Extensive drill, training and battle have helped mould these men into soldiers, capable of dealing with the enemy on equal terms.

Established in 2007 Red Maple is one of the largest wind turbine blade mould manufacturer worldwide, producing over 40 mould sets a year.

As part of that, I spent time in a burns unit where they use all these amazing splinting textiles that mould around the body.

One above the other, the protruding cages of the toilets make a sort of tower: toilets with mould-soft walls, marshy at the bottom.

He named the chemical found in the mould 'penicillin' and tried to make it pure to be a medicine, but was unable to do that.

The shell frame is manufactured by the inner mould transfer printing method, and the appearance of the shell frame has no seam.

It is often necessary to balance the gates of a multi-impression mould to ensure that the impressions fill simultaneously.

Of course, you're depending on the fact that your boss's boss isn't cast in the same mould as your boss (like tends to hire like).

And it tried to turn Symbian, its own operating system for smartphones, into a platform in the mould of the i Phone and Android.

the up and down the die and mould clamping appears spacing, integers, and easy to clean the broken product.

Michael's efforts mould a mind into a centralized throne for the Word of God, while the dragon turns a mind into a cloud without a center.

A bit of mould is a pleiad of flowers; a nebula is an ant-hill of stars.

For some time there was no noise but the grating sound of the spades discharging their freight of mould and gravel.

Molten steel leakage by binding is often related to the properties of mould powder.

Now, a few tons to dozens of tons of mould has become so common, so requires the worktable must be able to withstand the big weight.

Shaoxing mould tofu is one of the 'six mould products of Shaoxing' and is as famous as the Shaoxing aged rice wine.

They forged a sense of commonality in their collective effort to eke out a living and to mould a feeling of community and identity.

and a sand collection groove is designed at the joint of the sand core and the boss of the bottom half mould.

Methods By drawing design, mould making and test, an air inlet valve to meet the requirements was manufactured successfully.

Don't put the hand between the up and down mould in order not to be pressed or scaled.

The big sheets of clay then had to be carefully shaped inside of the plaster mould and cut even around the edges.

Finally, the replica part made of plastic was used to make a mould for casting the finished component in aluminium.

You know like the cheese with the mould on it.

Mould, as a kind of special product, is usually hit by the random factors during the production and processing.

At least 3 years of relevant working experience in mould design, fabrication.

When a composite reflector is molded, the heat distortion of the mould material should be taken into consideration.

Then I separate body and head, make a plastic mould of the body and transfer the skin to that copy, flake by flake.

Sure enough, the mould slowed down and sped up in time with the temperature changes.

starting with a small gate width, the mould is tried out with a short injection stroke so that short mouldings are obtained.

Rove's America was not just turned on its head yesterday. It was broken up and recast in a very different mould.

Sense yourself as a butterfly breaking out of your old mould and taking on a new aspect and form.

Partial methods have been applied to the design and manufacture of mould injection and mould casting with a very good effect.

A mixture of metal powder and a binder is pressed into a mould to form the shape of the finished part.

Application: Used for sand casting mould workshop, repairing the lining of steel making furnace and impacting the con crete on building.

'Although, I would be frightened at seeing this if I was a meat eater. Why hasn't even the bun become speckled with mould? It is odd. '

For the consistent of each flow casting billet quality, the magnetic induction intensity of each flow mould must be measured frequently.

But, if chest does not have the door, look a bit messy, also go against undertake moistureproof and mould proof wait for the job.

In recent years, many intelligent level control methods appeared to improve the controlling effect of the mould level.

The invention relates to a water softener water storage tank and a manufacturing mould and a manufacturing technology thereof.

Restricted by mould and shape of submerge nozzle, the thin slab casting blocking was more serious than thick slab casting.

In spite of this, mould may grow on the Kombucha culture (though it is extremely rare) just as it may grow on any foodstuff.

Mould flow and simulation should be carried out for the best gate location, filling analysis, pressure distribution and heat distribution.

Fleming tried this mould out on another bacterium and found that it killed the bacterium too.

The product made by the mould up to standard. Product dimension and standard up to enclosed artwork in this contract.

Have the right to put forward & check purchasing plan of equipment, tooling, mould and measuring tool.

First, a silicone mould is built by means of a stereolithography pattern of the mould.

as well as, keeping core surface from cracking and controlling the moment pressure in the mould can avoid veining defect.

As his British dealer and long-time friend, Mr Jopling, says: "Damien has always been a mould-breaker. "

In terms of a circular plastic product, a simple pin point gate mould was designed.

So far, however, China has little to show for all this investment in mould-breaking.

A set of mould with one module and two cavities was designed through the analysis of the technology of tap of potable water machine.

First, a silicone mould is built by means of a stereo lithography pattern of the mould .

A timber pallet can be made to countless sizes and configurations, and is not limited by mould sizes.

In-mould label in cards and membership cards to make the processing of various loss added up to, in some cases been able to achieve 30%.

Place serving plate upside down on the top of the mould, invert, shake to loosen and lift off mould.

Numerical simulation results show that the rotary magnetic field in mould is uniform, with its period two times of electromagnetic force.

The utility model relates to a music candy forming mechanism, which belongs to an improvement of a candy forming mould.

An annular groove is at the outer surface of the insulated loop frame, which requires a vertical parting of the mould along the axis.

Here I knocked off the neck of a bottle which I drew from a long row of its fellows that lay upon the mould.

Mould should be able to run fully automatic. Large part should be picked up by robot.

Chiefly the mould of a man's fortune is in his own hands.

In the experiment, cities were represented by porridge oats that were linked to one another as the slime mould grew.

This symbol only explain you had affected trichomonas or mould, do not show the severity of the infection.

According to need of production process, have the right to put forward purchasing plan of equipment, tooling, mould and measuring tool.

The heat transfer in the mould and the secondary zone is critical to the productivity and quality of a caster.

They think exactly alike, as if they were cast in the same mould.

Able to provide customers mould design, processing and injection mold processing products and services.

Forging graphite lubricant is an ideal mould release lubricant widely used in hot processing and forging of ferrous and non-ferrous metals.

The deadline for the project was getting closer, so I tried to speed up the drying of the mould with hot air.

Highlight Its Characteristics to Become the Backbone and Energetically Cultivate Regional Economic Growth Points for "the Land of Mould"

This type of gate is used for tubular-type mouldings when more than one impression is required in a simple two-plate mould.

Somebody that cast as a wave rider in the past could not be a man of mould.

At least five years experience in injection mould design, development and proofing.

some critical design parameter can only be ascertained after the mould is manufactured and through repeating testing, modification.

Contact with customer to understand what mould requirement and get mould drawing approval from customer.

Oscillating curve of different locations directly relates to whether the cast steel working is normal during the operation of the mould.

A mould cavity is formed between the neighboring modules which can be disassembled and two side walls of the track groove.

Support may be provided by a reduced pressure within an upper mould, a mechanical arm, or gas directed in a generally upwards direction.

The mechanical expansion pipe mould used for plastic RR reciprocal joint was discussed in detail.

Support may be provided by a reduced pressure within an upper mould, a mechanical arm, or gas directed in a generally upwards direction.

The mechanical expansion pipe mould used for plastic RR reciprocal joint was discussed in detail.

Review the design progress of each set of mould and follow up resolution of existing obstacle by holding meeting every week.

Checking the mould only depending on the sample piece and 3D measuring equipment bought this year haven't been used.

Modularization and scalability of the system was realized by dividing the control system into logic control unit and mould control unit.

The basin with multiple functions for massage and laundry is molded by an injection machine mould pressing.

in-mould label materials and plastic containers to have the same materials, recycling can be centrally, friendly.

The invention also relates to a process and a mould for the production of the blow-moulded bag-in-container (2).

Grease the moulds with butter. Half fill with brown sugar. Twist the mould as you pour the sugar into another mould.

and the surface of an optical element coated with the film has the mould-proof and anti-fogging functions.

and the surface of an optical element coated with the film has the mould-proof and anti-fogging functions.

Received it already. Will send it to the mould cup supplier proceed the pre-production Samples for your fitting approval.

The shrinkage rate of the injection mould for the various plastics is listed, the calculating applied examples are worked yet.

This article briefly introduced training objectives of mould specialized direction of applied undergraduate.

It is breaking out of the mould that your parents and peers have placed you in, and becoming the new you.

A set of mould with one module and four cavities has been designed through the analysis of the technology of press out lid.

But as the days passed, a damp black mould began to grow on him.

The exiting form of moisture in the mould and its transportation phenomenon when heated up is discussed.

card wrapping machine; sealing roller; ultrasonic mould; manufacturing cost of equipment; production capacity.

The mould component can be used for testing exothermic solder molten metal mobility.

Aiming at the resource-constrained project scheduling in a virtual enterprise for mould making, a mathematical model was put forward.

The company technical force is abundant, has the product development department and mould manufacturing.

Highlights from the design, injection mould steel mold processing are admitted into a higher than normal mode has the request.

The mould component is composed of a melting crucible part and a mobility test part.

As it happened, Mr Zimmerman had developed a "data glove" some years before, with the intention of using it to mould virtual pottery.

Hitler is narrow, seeing only his own national ideal, and would ruthlessly force the human spirit into his mould.

Unlike others of his generation, who broke the mould of literary form by experimenting with modernism, Forster's genius was quieter.

This makes it useful in technical discussions between the product designers and mould designers prior to the manufacture of the mould.

The men were all imitating each other, and on a small mould.

The spinning forming is to clamp blanks onto mould core, using spinning press to have mould core spin as high speed together with blanks.

Relationship has been studied on defect to deformation degree, friction factor and relative length of mould plastic section.

Pointing beams of light at different parts of the slime mould means that different legs move.

The part has no deformation with double drawing core mechanism instead of single one in the mould.

With this mould automatic stripping of plastic part can be realized operation strength lowered, and production efficiency increased.

and utilizing the holes to position and punching the material into a required housing product shape by using a mould.

Alan Harper: Closed mould processes are here to stay as they fulfil most, if not all, the new legislation edicts on VOC emissions.

Mould all over the grout, broken tiles, mould all round the intermitant bath seal.

The result shows that this method can improve the efficiency of mould design.

At 'a' the mould is in the early opening phase with the moulding just removed from the fixed half cavity.

It was considered that the reduction should be performed in the mould exit and the upper strand segment to decrease the strand stress.

In-mould label development in the long version business card printing and making the prevalence of membership card.

In fact one mould can produce many thousands of articles before it wears out. This is one of the reasons why plastic things are so cheap.

Could you please tell me what you mould like to see him about?

Mould replacement system located on the side of the furnace improves production efficiency.

In addition, a pair of manual or electric-operated booms is provided for disassembling the mould and mounting the large work pieces.

A semicircular recess is machined into the core plate (1), and a complimentary shaped local mould insert fitted as shown at 'a'.

A practical machining of injection mould cavity is taken as an example to show that HSM is one of developing trends in modern mould making.

These initiatives have resulted in significantly improved consistency and mould quality, reduced tolerances and an enhanced design process.

All the mould cost of the tire Party A produced for Party B shall be finally borne on Party A.

The manufacture of silicon rubber mould is one of indirect mould manufacturing methods of RT technique.

Mould friction is an important parameter of evaluating powder lubrication properties and reflecting the interaction between mould and shell.

The invention also relates to a method for producing a component for a continuous casting mould.

By using shock absorbers at many places of the machine, its noise becomes low, vibration damage less and service life of mould longer.

to understand a stamping mould manufacturing and process and key equipment.

Composed of the main machine , hydraulic system , flanging mould and electric control to accomplish the flanging process the drum body .

The mould only has to stay on the paw or nose for a second, so the dog or cat will not be stressed.

First , ignore his own connotation ability of mould and cultivate, overly depended beauty even judge by appearances.

The results show that the mould shell is of high strength and soundness and its inner side is clean.

The general arrangement is shown at (d) which gives a local section through the mould at the rclewmt point.

It has become a main trend of mould enterprises to share manufacturing resource to accomplish the business projects together.

Her fingers went over the mould of his face, over his features.

the base slab is covered by molten aluminum pad within a fourth set of mould to obtain the flatiron heating unit.

The designed and made periods of traditional auto panel die mould is longer, and craftwork design efficiency is lower.

Products are made to a much higher tolerance using advanced mould making techniques.

Once mixed, the mixture was vigorously stirred and vacuum degassed again for 3 min, and injected into a glass mould for curing.

Meanwhile, the shape and structure of mould structural channel can also be very influential in abrasive flow machining.

At least 2 years experience in plastics processing (injection & extrusion), metal working or mould manufacturing. 5.

Finally, it was pointed out that surface treating technology acted as an important role in mould development.

The Taiwanese head of his company, Dongguan Hongsheng Mould Factory, simply absconded.

Perhaps at first glance we are similar but on closer inspection we are not the same --- out of the same mould we are all different.

Organize the process team and maintain the daily mould set-up to meet production schedule.

The utility model relates to a T-shaped contraceptive device with a ball head and the placing mould.

The results show that the casting with good quality can be obtained by removing one ingate and adding cooling waterway into mould.

The company is able to design product structure and make metal mould to meet user's requirements.

The full mould sets are to be checked & confirmed to ensure consistency with graded Gauges and Technical Drawing.

Be limited to mould order bringing a few to a few people's life on the contrary inconvenient.

What was the substance in the mould which killed the germs?

Nandan Nilekani, one of the founders of Infosys, reports that he now comes across mould-breaking young leaders wherever he goes in India.

Work description : The main process: die cutting, mould, plastic injection, die casting, coating, spray membranes, assembly.

The biodegradable property of konjac superabsorbent polymer(KSAP) was evaluated by means of mould erosion and soil burying.

After studying on the molding technology, this paper designs a mould of bearing base and a mold for prepress of CP- DMC.

The casting technique for a huge aluminum alloy casting is studied by hydrodynamics simulation using Lucite mould.

The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.

The milling head or table can turn into a joint axis, which is applicable to processing to with complex cavity surface mould parts.

The mould was proved practically to be agile in movement, reliable in operation, regular in manufacturing.

Stretch fabrics work best against the skin, they mould and move with the body.

After mould first draft review, if customer for view of the first draft, then submit it to customer and follow up the review result.

At present, the magnetic technology is widely used in continuous casting process, so, the mould fluxes will be the role of electric field.

Nylon mould of sand casting can be made by selective laser sintering technology with shorter production cycle and lower production cost.

Simulation results show that the application of multivariate statistics method to monitor continuous casting mould process is feasible.

melt mould When the gold was heated and melted, they poured it into a mould to form a gold bar.

Up to 26, 000 tonnes of coffee, worth more than $40m, have been affected by mould at warehouses in the Italian port city of Trieste.

Mould manufacturing products well-presented, smooth lines, very suitable for library and xinhua bookstore environment configuration.

Not so long ago, this small clique could mould the world according to its predilections.

This process leads to a metal mould with a steel content of about 70% and good mechanical properties.

Whether Nature has acted rightly or wrongly in destroying the mould in which she cast me, can only be decided after I have been read.

After further research, he found that the mould could kill other bacteria as well as staphylococci.

It is frequently necessary to design a mould for a component which incorporates a thread.

The predominant feature of the mould is the hybrid approach which combines expert system technologies and neural networks techniques.

A process for production of compacted graphite iron using in-mould addition of a magnesium alloy is disclosed.

Lead team to set-up and maintain safety stock mould to meet business needs and implement accordingly.

Effects of self-spin of liquid copper in mould on microstructure and mechanical properties of hollow copper pipe have been investigated.

High-quality panel is made of the aluminum alloy, full-mould designed and the figuration is beautiful and fashionable.

When the gold was heated and melted, they poured it into a melted mould to form a gold bar.

This silicone mould is used to manufacture a green part of the RT - mould by filling in a compound of resin and steel powder .

Make sure new mould can be put into mass production stably. If any problem, discuss and find out solution together with mold department.

The company is engaged in the mould making of computer accessories, cell phone parts, automotive upholstery and photoelect ronic products.

Verified by the production, this mould features reasonable structure, high efficiency and notable economic benefits.

Weibel uses this patterned chip as a mould, into which he pours a liquid polymer.

In the United States, in-mould label printing and processing of scrap rate is very low and the cost of in-mold labels than sticker.

special circuit design even out of hscg system failure. broken chlorine source, etc. also can protect the mechanical arm and mould safety.

If product this kind of the order form amount up to 60Ks totally, we will return the mould expenses charged.

A mechanism of loosing core of two stage slider in the mould avoids deformation or break of tubing in different shapes while loosing core.

The precision of moulded parts depends on the mould stiffness. The proper design of steel structure supplies FRP mould stiffness.

The memory die set can be saved in difference mould parameter of production , and can increase the capability of production .

Through the analysis of the drain valve of washing machine, an injection mould for the drain valve was designed.

The construction here refers to a new kind of air pumping press, realizing the automatic draw, turn over, push out and removal of the mould.

The problem associated with this particular gate design is with respect to the machining of the tapering curved orifice in the mould plate.

these to make it powder-like and we mix it with cement and sand and put it in a mould and turn it into concrete products.

Through industrial test, the service life of mould can be doubled.

There had been engaged in before the mould processing and manufacturing mold design and engineering analysis review.

Static electricity is in-mould label materials, the solution is to use static device to control.

CMC-containing mud is insusceptible to influences of mould fungi, so maintenance of a high PH value and use of antiseptics can be avoided.

Methods Examination of recovery rates for 5 microbial strains were used to validate the counting methods of bacteria, mould, and yeast.

Our company is a specialized food mould manufacture. We supply the food mould that can be used to make cake, chocolate, cookies, and jelly.

Mould flux is a very important and critical material during continuous casting of steel, and takes a key role to improve quality of strands.

The aim of this research is to realize parallel surface design of casting and its mould based on reverse engineering.

The utility model discloses a plastic profile with 3D zooming effect and a special mould for manufacturing the plastic profile.

Obsolete venereal disease kitchen range , fibre, hardens kitchen range obsolete quality of the , pleurisy mould.

By controlling of the mould heat transfer and adjusting of secondary water cooling, longitudinal crack of steel sheet was controlled.

Why should the jelly mould served at the end of English meals be shaped like a cathedral?

Take imported High strength, High mould quantity Aramid fibre and combined with special kind of lubricating material by intertexture .

The mask was created from layers of wet linen gummed together, usually shaped over a mould and then given a thin outer coating of plaster.

For to stay, though the hours burn in the night, is to freeze and crystallize and be bound in a mould.

A special TIG flux for welding mould made of ZA alloy is experimentally developed.

Invasive mould infections are a major cause of infectious mortality in highly immunosuppressed patients.

one end of upper mould core matches the cut of upper guide sheath while another end matches the through hole of upper mould base.

The mould occurs on the trees naturally, but thrives in the warm conditions of a well-heated home at Christmas.

In 2007, Joe McHugh discovered a new species of Peruvian slime mould beetle and named it Genisphindus roxannae after his wife Roxanne.

It helps the mould designer, to select the most reasonable mould base type to his specific mould design project.

Motorola's new phone, the Cliq, is still an expensive device in the mould of an iPhone or a BlackBerry.

Four cavities and a central gate are adopted in the mould, so that the quality of castings produced and the production efficiency are high.

He hoped to mould a statement which would in any case save him from the necessity of quitting Florence.

Preferred bead manufacture involves formation in a mould and selective drying of the bead wall.

It adopts various materials compound which reduces mould unloading resistance and achieve good lubrication effect obviously .

Yixing Liaoyuan Chemical Co. , Ltd. is a specialized manufacturer in thiocyanate series and mould proofing antiseptic products.

Since the mould uses cast iron, the cost is greatly lowered as compared with the steel mould.

Any entrepreneur must mould his moral personality if he wants his actions possess moral value.

this machine is used for many varieties, mould replacement can system standard bricks, blind hole brick other alien products.

The following is a standard file and a brief introduction about the standard operation procedure for stamping mould.

Based on the analysis of the structure of the plastic part, the mould layout form of one-mould one-cavity was applied to this design.

Designing and manufacturing quality of extrusion mould immediately relates with the product's quality and product's developing period.

The finishing machining technology of the mould & die has been discussed by the theoretical and experiment methods in the article.

Consequently, the stand or fall of patternmaking master technology will affect the integral quality of the mould directly.

Casting: The process of fORcing molten metal into a mould to create a character OR slug of type.

The mould comprises a bottom plate, a maintenance panel, a built-in cover board and a built-in pipe.

Tungsten-carbide rotary burrs like a milling cutter with handle, is used in that complex inside of mould machining finish machining work.

Bread tends to mould in damp weather.

When it is annealed, amount of cokes are put into the furnace which is sealed up to prevent the oxidization of mould.

This mould dimples the surface of the golf ball.