mcu

The paper improved traditional Shock Pulse Method. The new method can improve the detection speed and easy-to-MCU.

This method can be applied as a base function module in the MCU system of a real time display curve graph.

Software of the system consists of two parts: software of DSP for measurement unit and software of MCU for management unit.

With a core processor of DSP, the system performs high-speed data collection through FPGA and MCU, and responds in real-time.

No matter what kind of MCU we use, the design of its reset circuit is always revolved.

After showing the working flow of the ultrasonic-cleaning line, the hardware and software design of the MCU controller system is given.

Even the enhanced version of the MCS51 compatible MCU almost has no DMA ability.

The performance of the control system depends on the performance of MCU(Micro Control Unit) while digital control technology is being used.

Therefore, the MCU control system is at an unprecedented rate to replace the classic electronic control system.

The system detects pulse peak by hardware circuits and controls data acquisition and network communication by MCU and Neuron chip.

This chip congregated the virtues of MCU and DSP, which has the powerful abilities of operation and control at a time.

Embedded system experiment using MCU is an important development trend of modern electronic technology experiment.

CAN bus is employed as information exchanging channel between host computer and MCU, and self-defined protocol is used for communication.

The system included three parts: sensor, MCU (micro-controller unit) and IPC. The monitor program was developed by VC.

MCU with a high cost performance in the small microprocessor control system hardware design, which is an important position.

Write MCU C language Program to complete Interrelated software design of the system.

In this paper, the MCU course experimental teaching as the background, the methods of simulation experiments is adopted thoroughly.

In this design, the data collection must be rapid and should be handled in batch, so the choosing of MCU is important.

As control algorithms become more complex, the capability of the digital motor controller increases from MCU to DSP levels of performance.

The integration of power and analog elements with a CMOS microcontroller unit (MCU) has been possible for several years.

Using a dedicated high-speed magnetic sensors with microcontroller (MCU) electronic compass can effectively solve these problems.

And the controlling platform makes up of sPC, a MCU and a wireless transceiver chip to transmit the command.

The system uses the MCU technology, being compatible for both manual and automatic controls.

Throughout the design, the MCU to complete the bulk of the workload, determines the stability of the whole system work.

in high performance MCU to achieve the bearing detection, data processing and alarm system to meet operational requirements.

Currently microcontroller penetrated into every aspect of our lives, and almost no hard to find traces of MCU which field.

This article introduces an elevation measurement system which is designed and made by utilizing MCU technology.

The article analyzed five reset circuits of MCU, and made a comparison with them.

The Microprogrammed Control Unit (MCU) is mainly used to the ordering and obeys of microinstruction.

The technology of INTEL80C196KB MCU is applied to design and fulfill a new kind of micro-processor protective device for asynchronous motor.

The application of two MCU could heighten the speed of response, enrich the source of control system and improve its performance.

Serial communication was used in the data transmission of MCU and MCU, MCU and peripheral hardware .

this text described how to design a MCU develop system which used for MCU experiment teaching.

Objective To transmit ECG signals through a portable dual-mcu ECG holter based dual-port RAM.

The data has to be transferred across the MCU and lost most performance.

When you apply power on a drive, MCU chip reads content of the flash chip into the memory and starts the code.

As the core of the control system, Infineon XC886 Micro Controller Unit(MCU) has rich peripheral unit to use in the control system.

Then, as the different of software client, software programs are designed for MCU A-side and MCU B-side respectively.

Thorough understanding of MCU simulation environment and firmware design and development .

After the information was processed by MCU ARM9, the result of measuring was displayed by touch screen and LCD.

Then, it introduces the Microcontroller (MCU) used in the system based on ARM processor.

Has capacity and experience on MCU hardware system design, components selection and evaluation. Has ability to solve the EMC problem.

The residual routine referred by this paper possesses universal utility to MCS51 MCU debugging for concrete engineering practice.

MCU is mainly in charge of the setting and displaying of control words, the receiving and sending of waveform data.

By utilizing the capacitors' character of storing charges and under the control of MCU, there is no path allowing electromagnetic coupling.

MCU handles data from network by interrupt method. Data processing follows communication protocol.

The software part completed the MCU programme of the HID equipment and uploaded the data of USB keyboard usage ID.

The multimedia center control system is designed, and MCU is employed to control audio, video and VGA switching modules.

The application technology of MCU involved many experiment aspects and the hardware investment is relatively large.

MCU is more suitable to be used in embedded systems than dedicated processors, and it gets most of the applications.

The power failure data-store is realized with a high precision voltage monitor and MCU.

With comparing and testing, the whole frame a reprocessing data with DSP(Digital Signal Process) and key controlling with MCU.

This article has designed an intelligent electronic password-lock using MCU as the core.

Software using assembly language programming, involving the MCU clock, interrupt and reset use.

FPGA is used as acquisition and storage devices of a photoelectric switch signal data, MCU controls FPGA, processes and displays the data.

An MCU-Based "Gauge" for SLA Batteries Think sealed lead-acid (SLA) batteries are a thing of the past?

Beijing University Press published "C8051F Series MCU Development and Programming Language C" attached disk procedures.

The system consists of data acquisition circuit under the control of MCU, LCD and alarm output unit.

Sometimes there is no flash chip on PCB that means content of the flash located inside MCU.

The Teaching Innovation of the Course "Principles and Applications of the Single Chip MCU"

The Measurement Control Unit (MCU), along with the required power supplies, is a part of the basic 500 test point system.

When MCU is programmed, ASM is featured by its high speed, while C51 has the advantage of its advanced language.

A MCU was used to acquire the photo detector data and the gyroscope signal.

The measuring methods for the grade of magnetic iron powder have been researched; and the measuring system based on PIC MCU is proposed.

Experiments showed that the intelligent area measurement equipment based on MCU is effective in the preliminary implementation.

A design scheme of MCU-based economical NC system for corrugated roller grinding machine is proposed in this paper.

In addition, monitor interface of PC is designed. Thus, PC can monitor the working state of power device through MCU.

Hardware and software designs are given, the divider setting which controlled by MCU is emphasized.

The principle of PWM signals adjusting LED bright was analyzed, and the controlling circuit of MCU was designed.

MCU adopts 2C bus to make up a peripheral manager circuit and communicate with DSP from dual port RAM.

The more intelligent can be obtained when using the MCU to control the emission and receive and to calculate the liquid-level.

alarm system of closing train, and its Launching and receiving is controlled by MCU.

This paper mainly study the MCU control device and transducer vibration control device.

7 years actual development experience with electronic analog, digital and MCU application circuits.

The features of C8051F020 MCU, analog input and output circuit design and Ethernet interface circuit design were discussed.

For by MCU and process of rotating disks connected with the clutch to control and motor timing control to achieve.

and if so, the MCU controls closing the backlight at a certain time length.

Sub-system, composed by 8051 MCU and assistant circuit, can collect environmental data with multiplex channel and transmit it.

This manostat can serve as a TTL circuit or MCU circuitry of power sources.

MCU and the use of the system, deepen the SCM application is a good way.

The design for storing data into USB memory is presented in this paper, and this process is controlled by MCU.

With STC89C52RC MCU processing data, the performances of processing data rapidly and high precision are obtained.

This paper introduces an in-system-debug solution for practical engineering developing of MCS51 MCU (Micro Control Unit).

Without modifying the architecture of the external memory bus , the MCS51 MCU always occupies the bus.

It includes a TC35 communication module of GSM, a AT89C51 MCU, a display part and a gathering data part.

Software and hardware design of an ultrasonic bladder volume scanner based on MCU is introduced.

Data transmission is realized by serial communication between MCU and PC.

The principle and the application of MCU is an important course for many majors.

The equipment adopts a MCU master-slave structure and the circuit uses modular design method.

An MCU-based fuzzy control technique for fiber drawing machines is developed.

It mainly studies the scheme of mini-GPRS communication system which takes MCU as core.

Visiting conflict that MCU and CPLD visit the same RAM in same time can be avoided by applying interruption and software timing strategy.

MCU, direct current and brushless motor, rotate speed Control.

develop one Temperature and Humidity program control system of the MCU.

A spectral data acquisition system is designed based on NMOS linear image sensor and micro controller unit (MCU) technology.

In this paper, an MCU-based real-time music rhythm extraction system is proposed.

Based on the mass literature materials, this paper designs a submersible buoy data acquisition and storage system based on MCU.

in now MCU experiment teaching, the mcu develop system has played the vital role.

C8051F340 MCU with USB function controller is used as a hardware platform to achieve data acquisition of the industrial field.

The primary MCU charged the operation of the core program.

Realization of Extending MCU Address Space By "Page address"

This system captures light energy's data based on MCU, but processes data on computer and draws light energy distributing's curve.

MCU is a course with strong applications and integration.

The paper introduces the design of controller system of voltage regulator based on MCU for electrostatic precipitator power supply.

After the buzzer MCU and connect their keys to control its players and the suspension of songs.

In this paper, a inverter for general purpose is developed and designed by MCU and IPM, which is low-cost and high reliability.

Design and Manufacture of MCU Scene Counting Machine in Vote .

This paper introduces a design of the LED lattice display system base on MCU AT89S51.

Neither is there an open and simple method to test the capacity of MCU in this field.

With MCU and CPLD, a telephone calling system is designed in the paper.

Application of MCU in Monitor Controlling.

Program realization of CRC in MCU and redundancy code table.

According to effective requirement, a single-phase inverter power supply controlled by MCU is designed.

This paper mainly studies about full digital-controlled Emergency power supply system which Based on LPC936 MCU (Microcomputer Unit).

And finally, an intelligent vehicle hardware system, where the algorithm is applied in, is designed based on HCS12 MCU.

The apparatus consists of sensors, MCU and GPRS module.

According to the need of the rhythm detection and energy output, a music rhythm extraction system based on MCU is proposed in the paper.

The embedded-Ethernet system with MCU C8051F020 and RTL8019AS hardware circuit and the software program designed .

Support customer products based on MCU development environment.

Sometimes more UART ports are needed in some embedded systems which limited the choice of MCU.

Embedded WEB server gateway based on 51 MCU is designed and implemented. The software is based on modularization and has strong portability.

To system needs, video decode program is designed by simulation of MCU's IO to I2C time sequence.

The software uses MCS-51 assembly language to compile the MCU program of data gathering.

The Analyzer with MC9S12DG128 MCU controlling system is used to collect and process the data of NH3 automatically and quickly.

Introduced one long-distance monitoring system which utilized GPRS module MC35I and SoC MCU C8051F023.

Modulation result was sent to MCU and displayed on the LCD.

This paper presents a design of host interface and boot of embedded hardware platform based on MCU DSP.

Develop and support debug tools and programming tools for MCU products. 3.

The data collection and process circuit based on MCU is researched and manufactured.

C8051F020 MCU was used as CPU, LCD12K64 was used as LCD Module, and thermocouple was used as temperature sensor.

The abnormal reset caused by interference and the effect of program fleet on the MCU applied system are illustrated in this paper.

The MCU MC9S12UF32 is adopted as main controller in this system and it realizes encryption U-disk's hardware design.

The method of designing single-phase energy meter by adopting ADE7753 energy chip and MSP430F412 MCU is studied.

To different kinds of MCUs, re-customize the hardware library and MCU configuration database can realize the universality of the platform.

MCU con-troller STC89C51 control the real-time calendar clock chip DS12C887 to process time information, with LCM1602 as a display device.

This design is a system of DC motor multiple speeds Based on PIC MCU is designed, as its necessary test equipment.

Networking Intelligent Watching Controling System Based on Embedded MCU .

Data collection system uses C8051F023 as the MCU, the peripheral circuit use of FPGA.

EM78 Series MCU internal asynchronous serial port does not have to use the software to complete the job.

Based on ARM microprocessor, LINUX and MCU, lighting control console with DMX512 protocol is presented in the paper.

the procedure 51 MCU right lcd LCD control, LCD for bringing their font.

Based on AT89C51 MCU performance, based on the MCU clock timer can be achieved.

The software environment includes the VHDL program of CPLD, control and display program of MCU, and so on.

In addition, MCU operation system A51OS and CRC table lookup algorithm are also introduced.

Digital pilot balloon theodolite system design and realization based on C8051F023 MCU.

This paper describes the use of Sunplus Technology, Inc. SPCE061A MCU as master plan design of digital electronic clock.

This paper introduces a weather tracking system of natural light. The P87LPC764 MCU is used as the detection control center.

Blake, MCU! I'm getting these boys to safety!

The machine uses the MCU as control core.

I familiar with the MCU and have my view in the automatic of NDT, I had do some project in the 80C51 MCU.

Most MCUs have only one duplex USART, that can't meet the demands for multi- MCU application.

According to the development of digitizing welding machine at present, double micro-processors are adopted for the pulsed MIG welding.

The first system uses 8-bit Microcontroller Unit (MCU) as kernel.

Introduced an intelligent parking lock controller based on MCU PIC16F676.

The converter is composed of Lingyang SPCE061A mcu, ordinary gates and amplifiers, it is simple.

In this paper we designed an intelligent hydrology telemetric terminal based on LPC2294 MCU.

The MCU of 8051 is used in DC servo electro motor control system, and method of using is introduced.

This paper mainly introduces a Transformer Terminal Unit based on MSP430F449 MCU.

MCU use EEPROM data preservation and the use of power-down mode I2C communications.

MC68332 is a kind of high Performance MCU, it gets the extensive usage in high-level MCU system.

This paper introduces a kind of stepper motor driver with the key of MCU C8051F020.

This paper introduces a kind of practical Laser constant source with high stability based on MCU.

A new type of solar auto-tracking system based on MCU is introduced.

We use the MAX232 chip in order to meet voltage convertion and serial communicate between MCU and PC.

Freescaie's newest 8-Bit MCU Family MC9S08QG --So highly integrated, it redefines the low end!

In order to meet these applications, some kinds of Neuron Chips designed with High Speed parallel interface. So any kind of MCU can use it.

Study on the Stacker Control System Based on MCU.

An intelligent flow totalizer based on 89C58 MCU is introduced.

This paper introduces an intelligent traffic light control system based on the Sunplus SPCE061A 16 bit MCU with the voice signal.

The data transmitting and system control are based on the C8051F MCU.

The technology of MCS-96 MCU and ISP is also introduced in my paper.

On the other hand, MCU is used to controll Ethernet power management chip, thus to realize the monitor of the working state of PD.

A51 MCU use of infrared data transmission SH607.

Among all kinds of 8051 MCU interfaces, I2C bus plays an important character.

How do you use the instruction PAGE in EM78 series MCU?

Being independent of expensive emulator and programmer, the system makes it much easier to study 51 MCU at low cost.

MCU vender RS has done a lot of work in China, but its current MCU business doesn't achieve its desired objectives.

second, the interface connecting MCU controller and welding machine is designed , as well as the related software and hardware, ;

The main tasks of this paper are as follows: studied the MCU fundamental and design method; researched assembler language programing;

Design and Implementation of A MCU Monitor Module in Intelligent High_Frequency Model DC Power System

Error analysis of synchronous frequency measurement method and accomplishment of the method in MCU measurement systems

Majoring Courses: C Program Language, Digital Electronics, Analog Electronics, MCU Interface Technology, PLC Control System

Implementation of centralized multipoint videoconferencing control unit MCU

Integrating National Undergraduate Electronic Design Contest into the Reform of the Course of MCU

Analog and digit circuit design and application, components selection and alternative, especially in home appliance, MCU, SMPS or others;

The Design of a Real Time Embedded Operation System of MCU with Tiny Core

MVC patten; component; MCU software simulator; virtual instruction set; simulation debugging;

The Hardware and Software Design of a New Type MCU Infrared Communication Interface

A Study on the Design for Electromagnetic Compatibility of a Monolithic MCU

The Design and Realization of Software and Hardware in Applicable System with a MCU

Familiar with embedded software development and debugging, experience in ARM MCU development is preferred;

The design of a real-time data acquisition and processing system based on multi-MCU

Familiar with the principle of MCU, have the experience of designing control board and writing monitor subroutines

Design and application of new-style man-machine interactive interface circuit directly driven by MCU

Realizing In-system Programming of MCU by Means of VB Language

MCU Based Collar Machine Controller and Its Multitasking Approach

Implementation and Programming Example of Serial Asynchronous Communication For MCU

the capability of c language, assembly language programming and simple MCU embedded system development;

Exploitation of MCU Phonetically Electronic Perpetual Calendar

A Real Time MCU Control System of High-speed Auto Thread Trimming Plain Lock Stitch Sewing Machine

This code is realizes the multithreading in monolithic integrated circuit MCU to insert the type operating system,

Policy of time-limited service and its application in MCU software design

The Application of a New SOC MCU in Temperature Compensation of a Leveller

Development of a New Tension-Compression Material Machinery Controlled by MCU

Data Protecting Methods in Case of Power Down for MCU Applied System

The Frequency Measurement Accuracy be Improved to Use Synchronous Multicycle Method with MCU

A Discussion about Testing Temperature System Which Combine the Digital Temperature Sensor and MCU

Design of MCU-Based Auto-control System for the Direct Expansion Solar Assisted Heat Pump Water Heater

Participate in electrical design for new product; focus on MCU software architecture design;

Application of MCU interface with floppy disk driver in computerised embroidery machine

Building-up of A Real-time Operating System used by 51 MCU

Research of Software Decode of Infrared Remote Controller and Application in Product Design with MCU

Technology of Interface Between Digital-controlled Potentiometer and PIC MCU

Fast Calibration of Portable Secondary Planet Equipment Implemented with MCU

Synthetical Application of MCU and Timing Technology of Frequency Conversion

Research on and Realization of Networking Personal Computer with MCU for Communication

Reform of MCU Course to Improve Engineering Education and Creative Consciousness

The Implementation of Parallel Communication Between DSP and MCU in High -speed Sewing Machine

PIC MCU Application in Intelligent Temperature Controller

The Application of the MCU Simulation Technology in the Component Safety Test

The design and implementation of a guided missile fire control system based on the MCU technology

Neural network arithmetic of atmospheric pressure sensor and realization by MCU

PC and MCU Radio Communication and its Implementation

Anti-interference technology of MCU measuring and controlling system

The Application of Multidrop Communication Method between PC and MCU in Engineering

Using Overlap-Scanning Method for Improving MCU Multiplication

An Oscilloscope's Interface for the MCU-aided Experimental Apparatus

The entire corntol system consists of MCU control, stable performance, low failure rate, self-diagnostic capability

MCU Communication with single-chip microcomputers on a DOS platform

MCU-Based Scene Mutual Compensation Independent Power Supply System

Using MCU to achieve the accelerometer linearity error compensation

Switch Processing Unit Used in MCU of Video Conference

Application of LCD Controlled by MCU in Precise Temperature Controller for Lasers

Application of MCU to intelligent interface of high precision magnet power supply

The Embedded MCU Controlling Biologic Resistance Tester

Multi-parameter MCU Measure System for Resistance Spot Welding Inverter

Application of fuzzy-intelligent control with MCU in irrigation project

This pulse can be used to wake up an external MCU to begin an

The Design of an Anti Power-Stealing Device in Electricity Distributing Box Based on MCU Control Technology

Design and realization of a radio-broadcast's MCU

The Elimination of the Influence of the Abnormal Reset and Program Fleet of MCU

In view of the MCU special application , it has designed based on the binary floating point data fixed point algorithm;

The design of a simple radon-detecting instrument based on MCU

The Discuss of Serial Communication between Microcomputer and MCU

MCU-Based Intelligent Speed Limiting and Fatigue Awakening Device

Design of the MCU Control Program in Intelligent Instrument's Power

The Research and Realization of MCU in Multi-point Conferencing System over IP Networks

Wind facing MCU controlling system of the concentrated wind energy turbine

Study of an energy-saving equipment of street light based on MCU

Flash Memory and Its Data Managing Method in MCU-Based System