aluminium alloy

Aluminium alloy lances and fittings should not be used in areas where flammable atmospheres might be present.

The phenomenon of arc starting will occur easily when high impedance coating occurs on the surface of aluminium alloy sample.

Suitable for the aluminium alloy is 1917 in France, Germany, in 1924 application, but did not form large-scale industrial production.

The surface bubble of 2A14 aluminium alloy rods is the main reason that results in the wasted product.

The state of the art of friction mechanism, relevant models, and lubrication during aluminium alloy sheet forming was reviewed.

s outer casing is made of high strength aluminium alloy, and treated by a special process. It'; s optical part is full coated.

So, aluminium alloy tubular conductor has been widely recognized gradually by electric design Department and used in electric projects.

Cages of bronze and aluminium alloy may be used for special applications.

Cast the aluminium alloy outer cover , gushes out and moulds on the surface.

The heat treatment production institutions of 2A70 aluminium alloy pre-stretching plate are determined.

Two aluminium alloy stanchions for accommodation ladder were lacked, to be provided.

Aluminium and aluminium alloy are one of the most widely applied five substrates.

Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.

Artificial neural networks were used to construct the model of properties prediction in 7175 aluminium alloy.

Inner- core designed professionally with good- quality aluminium alloy , so fastening and reasonable .

The titanium-aluminium alloy is characterized by light weight, high temperature strength and wearing resistance.

ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINGS. GENERAL TECHNICAL DELIVERY CONDITIONS.

To get more air hole ratio in the rare earth foam aluminium alloy, viscidity agent must be added.

The passivation treatment can improve the corrosion resistance of aluminium alloy effectively.

Hollow electronic beam welding can solve the difficult problems of the aluminium alloy 's welding.

Hot-dip galvanizing and zinc-aluminium alloy is the means to enhance resistance to corrosion protection of metal materials.

ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE. TECHNICAL SPECIFICATION.

Aluminium alloy skid prevention tartan plates for aviation and their producing method are disclosed.

cleaning, drying to produce aluminium alloy skid prevention tartan plates for aviation.

The application foreground and market requirement of aluminium alloy forgings are analysed.

The aluminium alloy skeleton is firm , wear- resisting , anti - oxidant , seeming natural has feels .

Suitable for incandescent lamp. Features Diecasted aluminium alloy shell with Compact structure and aesthetic appearance.

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4 : aluminium alloy flanges.

This kind of plane cannot BE built unless we find a metal even lighter than this high-strength aluminium alloy.

sealed performance is good: Aluminium alloy itself squashs easily, the cross section size of profile is exact, treatment definition is high.

RAILWAY FIXED EQUIPMENT. POST BRACKETS AND PORTAL STRUCTURES FOR SIGNALLING IN ALUMINIUM ALLOY.

International standard aluminium-alloy casing motor with CE &CSA certificntion. The mobile feet support three mounting faces optional.

Unhealed porosities and free surface of dendrites with crystalline steps were occasionally observed in aluminium alloy forgings.

Overall and circumjacent bag has aluminium alloy frame, indication screen wants a little bit small than 3GS edition.

The shrinkage cavity defects in tail of extruded aluminium alloy bar are studied by ultrasonic wave detection.

The results showed that interface of intermetallic compound foam can move into aluminium alloy matrix.

The article has studied effect of the forming temperature and forming degree on the microstructure of antirust aluminium alloy 5A06.

AEROSPACE SERIES. ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2289).

It was made from aluminium alloy, a kind of hard material, which can prevent the stuff you want to hold from being stolen.

The effects of different deforming temperature on the superplasticity of 2A12 aluminium alloy were experimented and discussed.

By X-ray detector, Electronic microscope and energy pedigree instrument, the dispersion lacuna in ZL101A aluminium alloy cast was analyzed.

RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.

It is reviewed the increasing supply and demand of aluminium alloy plate with aircraft production and consul increasingly.

Author validated corresponding stress and displacement of original material aluminium alloy in working condition. 3.

Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 2 : forging stock.

They may be installed with aluminium alloy frame in a fixed way.

The design approach for aluminium alloy grid structures and the design results of Yiwu Natatorium are presented.

The processing of the anode material, need when ideal match, recommended for welding 1000 series aluminium alloy.

Aluminium alloy shell, elegant, durable, heat eliminable .

The requirements of dimensions, mechnical properties, surface quality on aluminium alloy seam tubes are explained.

Thermit sparking of aluminium alloy cleaning lances against rusty surfaces.

GAS VESSELS. ALUMINIUM ALLOY SEAMLESS GAS CYLINDERS. CORROSION TESTS.

Aluminium alloy profiles and bars for various use in industry and building construction .

Roofing materials. Corrugated or ribbed aluminium alloy plates.

and the production efficiency is high by adopting the lost foam to manufacture the complex aluminium alloy casts.

The present invention discloses a method which can analyze welding quality of aluminium alloy through an X-ray negative.

ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE. DIMENSIONS.

The mortise lockets under "STS" brand are popular for wooden door, Iron door, Aluminium alloy door, etc.

Aluminium files are primarily for filing aluminium, aluminium alloy and may be used on other non-ferrous metals.

This paper studied the determination of trace calcium in casting aluminium alloy by ICP-AES method.

The estimating formulae of nonsymmetry cycle fatigue limits for aluminium alloy smooth specimens are presented in this paper.

GENERAL TOLERANCES ON ALUMINIUM ALLOY EXTRUDED SECTIONS.

ROOF COVERING. ALUMINIUM OR ALUMINIUM-ALLOY SHAPED LINEAR ELEMENTS.

Petroleum and natural gas industries - Aluminium alloy drill pipes.

The effects of thermal-cold transformation rate on the micro-yield strength and residual stress of LY12 aluminium alloy were studied.

l Outer frame may choose the paper frame , the galvanization iron frame, or aluminium alloy frame.

The effect of die quality, extruding and aging technology on the quality of aluminium alloy anodizing and coloring is reviewed.

Enclosure is cast with aluminium alloy, surface is sprayed with plastic, fine outline.

Aluminium alloy has low specific electrical resistance.

ROOF COVERING. ALUMINIUM ALLOY RIBBED SHEETS. STATIC AND DYNAMIC BEND TESTS.

it will remove excessive magnesium content in aluminium alloy effectively.

Then the load-carrying capacity of foam-filled aluminium alloy pontoon hull is studied.

It is concluded that coating of sodium silicate alumina clay makes face of aluminium alloy casting in green sand nonsmooth and level.

ALUMINIUM ALLOY SHEET. TOLERANCE ON TOTAL SURFACE THICKNESS.

The invention is usable for aluminium and aluminium alloy casting industry.

The upper cover is aluminium alloy, the other parts are hot-dip galvanized steel.

The clamp body and keepers are aluminium alloy , the other parts are hot-dip galvanized steel.

HARDWARE. GRAVITY CAST ALUMINIUM ALLOY HARDWARE.

The development tendency of aluminium alloy welding is forecast as well.

The foreign and China's states of aluminium alloy forging production are reviewed.

The results show that aluminium alloy foam has a high filter efficiency, low filter resistance, large infiltration coef . . .

Rear fuselage of aluminium alloy with composite fairings.

The friction coefficient is related to deformation resistance and the composition of aluminium alloy.

shove a hand: Choose stainless steel, aluminium alloy or coppery .

This paper presents the study and development of a high strength heat resistant aluminium alloy conductor for large span installation.

Plain bearings. Aluminium alloy for solid bearings.

Aerospace series. Washers, flat, in aluminium alloy, anodized or chromated.

Aluminium and aluminium alloy welding .

High strength rare earth foam aluminium alloy is prepared in our laboratory by smelting bubble system.

The law that change a window is original steel the window pulls down, change aluminium alloy window afresh .

F1183 Standard Specification for aluminium alloy chain link fence fabric.

The large aluminium alloy casting for military usage.

High-grade aluminium alloy shell for faster cooling.

Aluminium alloy body and wheels with brass bearings.

It shows that the twisting angle of aluminium alloy pipe is little, while the twisting problem of plastic pipe is serious.

Some samples were made with it with various kinds of aluminium-alloy material.

An applied formula of electroless Ni plating for aluminium alloy and steel was developed according to production practice.

Diecasted aluminium alloy shell with plasticsprayed surface.

Pistons are aluminium alloy with two cast iron rings.

2L provided Aluminium Alloy Oxygen cylinder can be used directly.

Cast aluminium alloy enclosures for gas-filled high-voltage swichtgear and controlgear.

Kg Full aluminium alloy body in configuration, the weight is reached 50Kg.

Designation and Specific Gravity of Common Aluminium Alloy in China and in the United States.

The process about 7A19 aluminium alloy melting-casting and some problems in production were introduced.

I hardly ever know that aluminium alloy could be as strong as steel.

When we use the aluminium alloy pipe to make heat exchanger, we must use expanding.

Aluminium alloy door all adopt 1. 0 thickness above.

Effective Methods to Improve Surface Quality and Mechanical Properties of Aluminium Alloy Foil Used for Pharmaceutical Package

Clean Manufacturing Technologies in the Surface Treatment Processes of Aluminium Alloy

Effect of Fabrication Process on Service Life of Die Used for Aluminium Alloy Hot Closed-die Forging

Study about Manufacturing Technology and Design of Die for Extruding Aluminium Alloy Large Profile Used for Train Body

Research about Improving Punch Press Property of Aluminium Alloy Foil Used for Electronic Shield

Effect of Chemical Component and Fabrication Process on Properties of Aluminium Alloy Sheet Used for Bottle Lid

Exploration about Reasoning of Die Design Used for Drawing Aluminium Alloy Quadrangle Tube

Study on the Spectrophotometric Colourimetry Determination of a Small Amount of Copper in Aluminium Alloy

Establishment of Analysis Curve Used for Negative Pole Aluminium Alloy Foil

Study on Properties of Welded Joints Micro-zones in Aluminium Alloy Profiles Used for Train

Research on Production Technology of Aluminium Alloy Profiles Used for Car Door

Design and Analysis about Structure of Plane Distribution Composite Die Used for Extruding Aluminium Alloy Profiles

Improvement of Usual Casting Die Used for Aluminium Alloy Circular Ingots

Study of a rapid hard anodizing process for aluminium alloy under high currents

Design of Extruding Die Used for Cantilever Aluminium Alloy Profiles

Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders

Specification for aluminium and aluminium alloy wrought products - Technical specification - General requirements

Evaluation of Large- type Aluminium Alloy Bar Stock for Vehicle- trolley and its Extruding Technological Characteristics

Failure Analysis of Parietal Cracking in Scavenging Pump Made of Die Casting Aluminium Alloy

Law of Hydrogen Content Change in Molten Aluminium Alloy During Casting Under Adjusted Pressure

Aerospace series - Aluminium and aluminium alloy products - Test methods - Determining susceptibility to stress-corrosion cracking

Comparison and Analysis of Energy Consumption for Full Aluminium Alloy Conductor with Steel - core Aluminium Conductor

Application Foreground and Production State of Aluminium Alloy Large-Size Extrusion Materials

Specification for aluminium alloy forging stock and forgings - Technical specification - General requirements

Development of Aluminium Alloy Coil Tube Used for Automobile Air Conditioner

Specification for aluminium alloy forging stock and forgings - Technical specification - Pre-production and production forgings

Simulation Study of Flow Characteristics of Semisolid Slurry Filling for Aluminium Alloy

Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate

Specification for aluminium and aluminium alloy wrought products - Technical specification - Wrought forging stock

Specification for aluminium and aluminium alloy wrought products - Technical specification - Sheet, strip formed profiles and plate

cams made of high-strength steel, bearings and cams hardened, bushings made of aluminium alloy, drive via gearwheels;

Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube for structures

Modelling of microstructural evolution of aluminium alloy during thermomechanical processing

Thin-walled Parts; Aluminium alloy; Milling force; Machining deformation; Residual stress; Finite element simulation;

Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube used under pressure

Thermal Simulation Study of Deformation Resistance of Aluminium Alloy

Founding - Technical conditions of delivery - Additional requirements for aluminium alloy castings

Parameter sensitivity of stamping forming of aluminium alloy sheets used in automobile cover

Specification for aluminium and aluminium alloy wrought products - Technical specification - Rivet wire

Mechanical properties of coating particulates reinforced aluminium alloy matrix composites

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges

Wrought aluminium alloy ferrules; ferrule secured terminations; safety requirements

Production Process and Key Technology of a large industries Aluminium Alloy Extruded Shapes

Study of Pressing Graphite Inwall Defect of Aluminium Alloy Pipes during Extrusion

Specification for aluminium and aluminium alloy wrought products - Technical specification - Bar and section

Specification for aluminium alloy forging stock and forgings - Technical specification - Forging stock

Wrought aluminium and aluminium alloy seamless drawn round tubes Dimensions, dimensional tolerances and form tolerances

Study of Composite Hard Anodizing of Aluminium Alloy 6063 and Its Friction Behaviors

Rigidity Analysis and Experimental Validation of Aluminium Alloy Structure Repaired by Composite Material Patches

Properties of reinforced aluminium alloy hybrid composites and determination of optimal volumetric fraction of short fibers

Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type

Production of the Expanded-Diameter Heat Resistant Aluminium Alloy Bus for a 750 kV Transmission Project

Wrought aluminium alloy ferrules; tubing blanks of oval section and constant wall thickness; technical delivery conditions

Aerospace series - Rivets, solid, in aluminium or aluminium alloy, metric series - Technical specification

Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing

Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing

Application of Photoelectric Spectroanalysis on Quality Analyzing of Aluminium Alloy Products

Correlation between uniaxial tension properties and formability of automotive aluminium alloy sheet

Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

Aerospace; wrought aluminium alloy wedge; technical specifications

Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification

Standard qualification procedure for ultrasonic testing technique of aluminium and aluminium alloy welds

Magnetic Field Generator and Its Application to Thin-walled Aluminium Alloy Castings

Structure and Corrosion Resistance of Electrodeposited Ni-SiC Composite Coating for Aluminium Alloy Substrate

Aerospace series; aluminium and aluminium alloy rivets; technical specification

Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders

Design and research of the energy-saving, environment-friendly, anti-sinking, aluminium alloy yacht

Numerical simulation of direct extrusion process for preparing spray deposition pipe of heat-resistant aluminium alloy

Compatibility of Wide-Temperature and Fast-Rate Anodization of Aluminium Alloy with Cathodic Electrophoresis

Developing Trends and Fabrication Technology about New Type Architecture Aluminium Alloy Profiles

Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft

Weibull Statistical Analysis of Tensile Strength Data of Mullite-short-fibre-reinforced Aluminium Alloy Composite

Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy

Wrought aluminium and aluminium alloy products--Packing, marking, transporting and storing

Fundamental Study on Electromagnetic Continuous Casting Aluminium Alloy

Studies on Chemical Polishing for Aluminium Alloy Using Phosphoric Acid-Sulfuric Acid System Polishing Solution

Effect of Rapid Solidification and Atomization Technology on Morphology and Size Distribution of Aluminium Alloy Powders

Determination of Aluminium Alloy by Photoelectric Direct-Reading Spectrometry

Electrochemical Corrosion Methodsfor Evaluating Painted Aluminium Alloy Systems

Specification for bushes flanged, aluminium alloy with self-lubricating liner - Dimensions and loads

Aerospace series - Bushes, flanged aluminium alloy with self-lubricating liner; Dimensions and loads

Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings

Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification

Electrochemical properties of Aluminium Alloy Sacrificial Anode

Aluminium-alloy Die Casting Molds Treated by Powder Boriding with a Paint

Environmental Protection and Labor Environment about Aluminium Alloy Melting and Casting

Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate

Research on Test Methods Regarding Aluminium Alloy Oxygenation and Electroplate Layer of Metal Furniture

Compatibility of Spraying Fluorocarbon Coating with Phosphating on Aluminium Alloy

Study of Top Coatings For the Aluminium Alloy City Railway Train

Non-ferrous metal Pure copper Brass Bronze Copper-nickel alloy Zinc-Copper-nickel alloy Wrought aluminium and aluminium alloy

Application of the uniform design method in developing A-TIG activating fluxes for aluminium alloy

The manufacturing process and necessary equipment for the manufacture of aluminium alloy rod

Effects of Unipolar Pulse Current Density on the Phase Composition and Microstructure of Aluminium Alloy MAO Coating

Specification for bushes plain, aluminium alloy with self-lubricating liner - Dimensions and loads

Application of spectrograph with direct analytical line for aluminium and aluminium alloy analysis

Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks

Aerospace series - Bushes, plain aluminium alloy with self-lubricating liner; Dimensions and loads

Experimental Assessment for Aluminium Alloy Sections in Glass Curtain Walls of Shanghai Jinmao Building

Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy

Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock

Effects of Electrolyte Solution on Phase Component and Elementary Composition of MAO Coatings on Aluminium Alloy

Standard qualification procedure for welding technique of aluminium and aluminium alloy

How Determining Production Difficulty of Aluminium Alloy Extrusion Profiles

Nondestructive Evaluation Methods for Aluminium Alloy Friction Stir Welding

Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series

Aluminium Alloy; Truss Girder; Suspension Bridge; Bridge Deck System; Friction Stir Welding;

Die forgings of aluminium and aluminium alloy--Dimensional tolerance and machining allowance

Investigation of the dynamic compressive properties of the aluminium alloy foam

Determination of aluminium in aluminium alloy and pure aluminium by fluoride replacing EDTA titrimetry

Factors of Affecting Up-stream Conducting Distance during Aluminium Alloy Semi-continuous Casting

Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges

Prospect Analysis of The Homemade Aluminium-Alloy Transmission Lines

Application of glass ellipsoid aluminium alloy structure in building engineering

Aerospace; inserts for composite materials, with clearance hole, aluminium alloy

Characterization of mechanical properties for aluminium alloy welded joint

Water Soluble Stripper for Aluminium Alloy Covering Finishing Applications

Grain Refinement and Fading Behaviour of Directly Electrolytic Low Titanium Aluminium Alloy

Introduction of performance of aluminium-covered steel strand and aluminium alloy conductor

Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft

Wrought aluminium and aluminium alloy extruded profiles--Tolerances on dimensions and shape

Determination about technology parameters of X-ray flaw detection for aluminium alloy floating bridge

Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy

Materials Selection of Conn-rod Aluminium Alloy Die-casting Dies and Combined Reinforcement Treatment

Market Potential and Fabrication Technology and Specific Properties of Aluminium Alloy Car Wheel

Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells

Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure

Determination of trace copper in aluminium alloy by stripping voltammetry of carbon paste micro electrode

Experimental Study on Carrying Capacity of Welded Aluminium Alloy Compressive Members

Development and Application of Aluminium Alloy Products in Traffic Transport Industry

Determination of calcium content in silicon- calcium-barium and silicon-calcium-barium-aluminium alloy by EDTA complexometric titration

Optimizing aluminium alloy anodization process with orthogonal test

Developing situation of aluminium alloy compound welding technology

Technology Summarization About Aluminium Alloy Material with PVDF Coating

Aluminium alloy and magnesium alloy castings; liquid penetrant inspection

Potential perils existing in glass curtain wall with aluminium alloy frames and precautions against them

Study on Laser Cladding of Wear-Resistant SiC Particle Reinforced Composite Layer on Aluminium Alloy Surface

Process Study on Super-strength Aluminium Alloy Used in Wire Spoke of Bicycle

Application and Production Technology of New Type Aluminium Alloy Pull-Fences

Welding wire matched to aluminium alloy extruded profiles for railroad vehicle structures

Discussion about Thickness of Aluminium Alloy Profile for Curtain Wall of Shanghai Jinmao Great Mansion

Production practice of electric-deposition process for aluminium alloy profile