mold cavity

Casting is a manufacturing process in which molten metal is poured or injected and allowed to solidify in a suitably shaped mold cavity.

If not, due to the mold cavity pressure to the side of too much, resulting in scoliosis will be forming part of the failure.

Off: in manipulator delivery label, halfway out of sucker falls, sent to moulding or vacuum adsorbability, dropped out of the mold cavity.

Molten metal is poured into a mold cavity formed out of sand.

In compression molding the plastic material as powder or performs is placed into a heated steel mold cavity.

The temperature and its distribution of the mold cavity surface directly affects the efficiency and quality of RHCM plastic parts.

Basing on the theory of blurry illation, the algorithm completes the analysis for geometric features of mold cavity part.

The rubber base material is constructed and arranged to have a profiles that substantially matches the profile of the mold cavity.

The average velocity result shows the average magnitude of velocity of the polymer inside the mold cavity over time.

to the molten plastic exert high pressure, make its injection and full of mold cavity.

The mold cavity is much by the complicated space 6 surface and groove that form, and many have deep hole mold cavity.

Vents that are too small can lead to trapped air in the mold cavity, which can slow melt flow into the cavity.

The mold includes a mold cavity plate configured to receive a mold cavity insert.

Currently a single cavity, a simple mold cavity 70%, and still dominant.

A rubber base material is in the mold cavity.

Based on ANSYS, this paper illustrates how to design the structure of injection mold cavity with finite element analysis efficiently.

Protection from exposure to mold cavity Antirust excessive spraying is critical, as it would cause serious or bond percolation melting;

The Vibrancy Polishing Technology of Ultrasonic on the Surface of Mold Cavity

Influence of the Average Temperature Boundary Condition on Mold Cavity Surface to Injection Molding Simulation

performing injection molding to a mold cavity of the injection mold;

The method for manufacturing the clothes rack comprises the following steps of: firstly, injecting plastic melt into the mold cavity;

Magnetic Abrasive Finishing and Reverse Engineer for the Mold Cavity

The Superiority of Electrochemistry Polishing for Mold Cavity

Application of CAXA Software in the Precision Processing of Mold Cavity Curved Surface

Analyse of strength and toughness to circular mold cavity in injection molding

Cutting Processing Technology for the Mold Cavity

Manufacture of Plastic Pattern of Large Casting with Complex Mold Cavity

Programming of Processing with Matrix Array Mold Cavity

Brief Analysis on the Manufacture Project of Blowing Mold Cavity

Overcutting Phenomenon for Mold Cavity NC-Milling

Analysis of flowing paths of injection mold cavity in plastic melt

Excessively Large Projected Area of Mold Cavity

The mold cavity number is used to group plastic cuvettes at production time;

The Design of Injection Mold Cavity's Wall Thickness on VB

the center of the mold cavity has a sand core;

Critical Points of Precise Mold Cavity by EDM

KBE-Based Mold Cavity Design System

EDM Forming of Alloy Mold Cavity

A method of NC milling ECM mold cavity

Ends at the mold cavity