mechanical properties

Brick and tile better than the mechanical properties of soil, materials, and easy to manufacture.

Brick and tile has superior mechanical properties than the soil can be from local materials, yet easy to manufacture.

The excellent mechanical properties, manufacturing and processing are easy to and cheaper, so most used to do terminal materials.

The surface of these models is parallel to the surface of perform, which is suitable for the analysis of the mechanical properties.

So the effects of these factors on mechanical properties of materials are needed to be considered in the strength calculation.

It has special physical and mechanical properties due to its composition, structure and sedimentary environment.

However, mechanical properties for compatibility systems did not improve due to the relative low strength of compatibilizer.

Some of the mechanical properties of the project is delegated to a State inspection body for testing, to reduce the investment.

Over the last years a considerable amount of research work has been carried out on the mechanical properties of HSC .

The mechanical properties of cortical bone are more homogeneous along the length than around the circumference.

In terms of mechanical properties, the stronger the forces are, the greater is the strength and rigidity of the mineral crystal.

Effects of treatment on the surface morphology, mechanical properties and the slurry loading on templates are studied.

Longitudinal flexibility is one of important mechanical properties of a coronary stent.

Mechanical properties are defined as a measure of a material's ability to carry or resist mechanical forces or stresses.

Conclusion: Plasma welding can improve mechanical properties and might be suitable for pure titanium welding in restorative dentistry.

Ultimately, only a controlled clinical trial can determine whether the mechanical properties reported here correlate with clinical success.

To understand the overall mechanical properties of the thin-walled curved-box girders, an improved method is put forward in the paper.

The mechanical properties of the weld is the best when the surface energy in the best value.

The oil-extended rubber obtained from rubber aromatic oil is of good processibility with satisfactory mechanical properties.

The heat aging properties of rigid PVC are studied by means of mechanical properties test, SEM and FT-IR.

Furthermore, the surface of oxidized cotton fiber becomes smooth and the mechanical properties change little after treated with sericin.

The results show that the surface treatment super thin-SiO2 can efficiently improve the mechanical properties of PVC.

However, the poor corrosion resistance and the mechanical properties of Light alloy restricted there application in production.

The chemical composition, microstructure and mechanical properties of connecting rod blank made of microalloy steel are analyzed.

The rational geometrical model determines the compatibility of the research on mechanical properties and the result of experiment.

Hardness testing is to evaluate the mechanical properties of metal fastest, most economical and most of a simple test method.

Therefore, material can access to higher mechanical properties and of the performance of excellent deformability.

It is well known that the microstructure of these coatings significantly influences their mechanical properties and biocompatibility.

so for every batch of casting valves, there will be a testing records for the chemical compositions as well as the mechanical properties.

The objective of this review is to discuss relationships between biochemical constituents and macroscopic mechanical properties.

The moulding temperature has no obvious effect on mechanical properties.

The technical treatment of cyclophosphamide by a label with a different direction, mechanical properties, when you lift easily damaged.

Both bushings' mechanical properties can meet the work requirements, but equal thickness wall bushing is better than conventional.

the correlation between measured stress and mechanical properties of rock & rock mass result of rock mechanical test is low.

In fact, cutting materials differ in the degree to which they possess each of those mechanical properties.

The material, having high transparency and perfect mechanical properties can be used to manufacture agricultural film and tableware.

Nowadays, the fiber-reinforced concrete becomes one of the research focuses for its superior mechanical properties.

Analysis are made to the rupture and chemical composition, mechanical properties and microstructure of the material.

Stainless steels have been widely used in various fields due to their good corrosion resistance and mechanical properties.

It was found that the mechanical properties of epoxy nanocomposites showed significant improvement with the content of silica nanoparticles.

Surrounding rock mass is in a new humidity condition when underground cavern is excavating, which will change mechanical properties.

The appearance of the air holes would lead to the decrease in mechanical properties and gas tightness of Shell-Gear-Change-Lever.

The RCC prepared by the coarse ground cement satisfies the design requirements and its mechanical properties have considerable surplus.

Addition of these nucleation agents decreased the haze of films without sacrificing the mechanical properties.

LB films have not gained mass industrial production at present due to the poor mechanical properties and stability.

Mechanical properties of light like linear and angular momentum allow for the trapping, rotation and manipulation of microscopic objects.

in such cases the mechanical properties are to be agreed at the time of enquiry and order.

The mechanical properties and the long-term stability of the electrode are also greatly improved.

This process can effectively eliminate chilling, improve mechanical properties and machinability, as well as realize effective filtering.

Quantitative studies of pore fluid influence on the mechanical properties of rocks are carried out on mesoscopic scale.

The mechanical properties of blends softened with liquid olefin were better than with naphthenic oil and macromolecule cere.

With the numerical calculation of the microcosmic frame network, the mechanical properties of soil can be well simulated.

On the base of test analyse about its physical and mechanical properties, developing material study of impermeability and cast technics.

Material mechanical properties relative with its deformation coming from outside force and load.

The presence of inclusions and developed prior particle boundaries (PPB) damage mechanical properties and service life of HIP disk.

The mechanical properties of the composites made of the prepregs impregnated in both solvent and hot-melt methods were compared.

The microstructure and mechanical properties of two high manganese austenite steels during tensile tests at room temperature were studied.

Objective To determine whether the alteration of cytoskeleton interfere with the mechanical properties of normal rat kidney cells (NRKCs).

Organic steel fiber, as an alternative product of steel fiber, can effectively improve the mechanical properties and durability of concrete.

Therefore, by determining the intensity of ultrasonic damping, the mechanical properties of composite can be predicted directly.

Due to outstanding mechanical properties and biocompatibility the BC appears a favourable candidate for tissue engineering applications.

Due to the excellent mechanical properties, in-situ ferrous matrix composites can be used in as-cast condition.

Silk offers an alternative for scaffolds engineering for its biocompatibility , unique mechanical properties and slow rate of degradation.

The mechanical properties of porous physical model are gained by means of uniaxial compression tests.

The welded joint with good appearance, defect-free and excellent mechanical properties can be obtained under optimum joining conditions.

Nanoindentation technique is a technique that determines the mechanical properties of a material in the sub-micro scale.

Layered rock mass which is always met in underground engineering has obvious anisotropic mechanical properties.

The mechanical properties of steel wires and concrete should be considered in the calculation and analysis of containment structure.

The mechanical properties of polymer material depend on the character of the molecule chain and the state of aggregation.

Atomic force microscopy (AFM) has been widely used to investigate structures and mechanical properties of materials on surfaces.

The mechanical properties of the rolled and subsequently heat treated isotactic polypropylene were measured by the tensile tests.

Immobilized yeast cells fermentation had stable liquor yield and i mechanical properties.

Man-made engineering materials generally demonstrate excellent mechanical properties, which often far exceed those of natural materials.

Particle reinforced Ti matrix composite has good mechanical properties. Powder metallurgy has advantage of producing this composite.

The microstructure, mechanical properties and tribological behaviors of the steel treated by different heat treatments were studied.

The mechanical properties of propellants formulation, which contains PEO binder and is plasticized by nitrate ester were studied.

Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes.

Therefore, an effective method of evaluation is needed to characterize the mechanical properties of those materials on nanometer scale.

Pulsing current is of significant influence on the mechanical properties and micro structures of metal materials.

On this basis, it gets the reasonable gradient of overhead sloping ramp starting from rational structure and mechanical properties.

In understanding the related areas of metalworking and methods used today, the mechanical properties of metals are of the utmost importance.

mechanical properties and the creep-rupture life of the nanon-sized Ag particles reinforced Sn-37Pb composite solder were investigated.

The static and dynamic mechanical properties, thermal stability, crystalline behavior and combustion performance were researched fully.

Keywords: ultrasound, achilles tendon, mechanical properties, resonant frequency.

The combination of mechanical properties of this alloy can be achieved by heat treatment.

Strengthening and toughening techniques are the most effective methods to improve mechanical properties of glass-ceramics.

It was also found that the vacancy defects are quite harmful to the mechanical properties.

Plastics based sandwich structures. Determination of mechanical properties. Definitions.

Moreover, their photo-curing properties, dynamic mechanical thermal properties and mechanical properties were also investigated.

This article is to explain the flexural and axis tensile process experimental study for the mechanical properties of mixed gravel of RPC.

The carbon pick-up was successfully overcome and the final sintered MIM parts of excellent mechanical properties were produced.

The results show that microstructure and mechanical properties of the BTi-62421S alloy can be significantly improved by heat deformation.

The mechanical properties of zein films could be improved by modifying filming technology and adding plasticizer and crosslinking agent.

As the pure silicone rubber poor mechanical properties, so it has a value adding reinforcing filler.

The test results show that the mechanical properties of reactive powder concrete possess high strength, toughness, and abrasion resistance.

The microstructure and mechanical properties of a new kind of microdistortion gear steel under different cooling rate was studied.

Based on the test results in this paper, alternative predicting methods for the long-term mechanical properties of were proposed.

The influences of heat - treatment on the mechanical properties and microstructure of wrapping steel strip have been studied in this paper.

The composite laminates had excellent dielectric properties, good mechanical properties, good solvent resistance and low water absorption.

Lignin has influences at different extents on mechanical properties, ageing property, thermostability and thermal degradation of plastics.

Mechanical properties of test pieces obtained with these two methods are compared and a conclusion has been reached.

The test result show, it possess higher crack resistance, satisfactory weldability, and im-prove mechanical properties of the welded joint.

The results of mechanical properties test indicated that the complex smoke suppressor possesses good compatibility with polymers.

Tensile testing shows that broad mechanical properties could be obtained by varying the component ratio of polymer and vulcanizing system.

A procedure is presented for the numerical evaluation of the mechanical properties of woven fabric composite material.

This process leads to a metal mould with a steel content of about 70% and good mechanical properties.

Effects of self-spin of liquid copper in mould on microstructure and mechanical properties of hollow copper pipe have been investigated.

Electrical, optical, magnetic, and mechanical properties of metals, semiconductors, ceramics, and polymers.

The controlling mechanism of moisture content of mechanical properties of sedimentary rock and its bursting potential is also revealed.

The quasi-static and dynamic compression mechanical properties of sandwich panel with aluminum foam core have been studied in this paper.

The results show that the main cause of the failure is fatigue and insufficient mechanical properties of the bolt.

Composite biomaterials had better mechanical properties and suitable decomposable capability.

Through the material tensile test, the mechanical properties of aluminum alloy cylinder liners are also meet requirements.

and the interface between the fibers and aluminum alloy matrix has great effect on mechanical properties of the composites.

The fracture reason of roller was studied using chemical analysis, mechanical properties, metallographic structure, fracture analysis et al.

Especially the mechanical properties of hollow carbon fibers prepared from thermal condensation mesophase pitch precursor were studied.

The results of mechanical properties testing also showed that MMT had an accelerating effect on the aging properties of polymer.

Improving mechanical properties of paper and board manufactured from recycled paper is an important subject today.

When the load is the stress cycle, the mechanical properties of materials caused by the deterioration process is known as fatigue damage.

The results showed that the pre-aging had no obvious effect on the mechanical properties and electrical conductivity.

The network structure appears under higher temperature ageing is the main reason that mechanical properties decrease.

The complex aluminum castings produced by this technique have good comprehensive mechanical properties.

The experiments show that ethanolamine additives added to the composites improve their mechanical properties remarkably.

This paper studies the self-made low profile additive and its influence on shrinkage rate and mechanical properties of UP resin.

This essay researches experimentally the change of the mechanical properties of multi-axial warp-knitted (MWK) uncoated and coated.

abstract: Silk fibroin has mechanical properties similar to tendons, good biocompatibility and good processing performance.

Conventional polymers usually have good processability, low density and good mechanical properties, but have not high conductive properties.

The improved mechanical properties and good castability of this alloy, combined with low cost, make . . .

Over the critical content, the mechanical properties of zirconia ceramic gradually decrease.

The result shows that it may remarkably improve the mechanical properties of WPC by chemically modifying wood fiber.

By employing pulsing current, the processing properties and mechanical properties of metal materials are significantly improved.

The chosen optimum formulation had good film reforming properties, processing properties, complex mechanical properties of film.

Research purposes: At a low temperature, the mechanical properties of rail steel get worse and brittle(failures) can happen more easily.

abstract: Objective To evaluate the mechanical properties of acromioclavicular fixation system(AFS) designed by ourselves.

The metallographical structure of the pipes become widmanstatten, and its mechanical properties are dropped notably.

The purpose of heat treating is to make a metal more useful by changing or restoring its mechanical properties.

and its effect on the mechanical properties and thermal property of waste newspaper flour (PF) filled PVC composites was studied.

The sintering temperature decreased with the increasing of metal contents, which could improve the mechanical properties of ceramics.

Compared to ordinary grouted masonry, the mechanical properties of the grouted slotted block masonry were more realistic.

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : Bolts , screws and studs .

This paper analysed the mechanical properties of horsehead structure through the numerical simulation.

To determine the microstructural mechanical properties of W alloy is very important for the research and design of the alloy.

Timber structures. Structural timber and glued laminated timber. Determination of som physical and mechanical properties.

Temper. Temper is the state of metal or alloy involving its structure and mechanical properties .

Effects of different cooling medium on microstructure and mechanical properties of bainite wear resistant steel plate were investigated.

In view of the poor mechanical properties of PP in low temperature, PP was toughened by EVA elastomer for its elasticity.

The Pb brass has been treated with cryogenic treatment, the mechanical properties testing and microstructure analysis have been done.

Fundamental Physicochemical Properties of foods, which covers rheological and mechanical properties of solid foods.

The viscoelastic mechanical properties of human tibial cancellous bone were studied experimentally and theoretically.

The article deals with the mechanical properties and shielding rate of neutron shielding fibre was analysed.

Porosities of composites decrease with the increase of fibre volume fraction, whereas the mechanical properties increased.

The influences of formaldehyde, hydrogen peroxide and crosslinker on mechanical properties were investigated.

The tests of PTFE micro-pore membrane samples in different directions reveal that the membrane is anisotropy in mechanical properties.

The mechanical property The mechanical properties of commonly galvanized steel are not significantly affected by galvanizing.

An analytical model named fibres bend model (FBM) is presented for the in plane mechanical properties of stitched composite laminates.

A two-stage cooling pattern was proved all the better for both plate's structure and mechanical properties.

The compound nylon material provided by the invention is good in both mechanical properties and high temperature resistance.

The results showed that the changes of mechanical properties of the samples are in accord with the changes of upper bainitic microstructure.

The results showed that the thermal stabilities and mechanical properties of product were excellent and the processibility was perfect.

Solution treatment parameters have great influences on the microstructure and mechanical properties of rheology die casting.

after aging test , its retention rate of mechanical properties is higher than that of the reference group.

Consistency of the process was tested by evaluating the repeatability of the resultant materials' mechanical properties.

Sintering shrinkage, mechanical properties and the optimized sintering temperatures are also presented.

Therefore we knew the parameters and equations of mechanical properties of each testing point.

The morphological structure and mechanical properties of new-type cool health jade fiber were analyzed and researched in the paper.

The combination also gives high -gloss HDPE packaging improved mechanical properties when compared to other high -gloss alternatives.

Besides, physical metallurgy also includes the techniques and processes of changing the physical and mechanical properties of metals.

Conventional techniques of processing of alloys lead to a coarse-grain microstructure and give rise to inferior mechanical properties.

Structural timber. Determination of characteristic values of mechanical properties and density.

The results show that the content of Zn and the annealing processing influence the mechanical properties of the material.

The mechanical properties of the new material show good results with tests revealing better properties than pure UP polymers.

A mall amount off proper processing aids can also remarkably improve the fluidity of TPO without a fall of the mechanical properties.

The experimental research on the mechanical properties of granite rock and concrete after different high temperatures was conducted.

The influence of different porosity and density on silicon carbide reticulated porous ceramics' mechanical properties, etc.

The influence of isothermally -quenching temperature on the retained austenite in ADI and mechanical properties of ADI was investigated.

The effects of the concentration of treatment fluid and treatment time on the mechanical properties of the film were discussed.

The mechanical properties of nodular cast iron can be further improved by isothermal quenching.

In addition to its light weight, the composite material has excellent mechanical properties compared to metal.

The mechanical properties of films made from the suspensions of blended natural polysaccharides, cellulose and chitosan, are studied.

Mechanical properties: high-intensity, high mechanical modulus, low latent degeneration.

The interlayer dielectric film formed by the method has a low dielectric constant and shows superior mechanical properties.

Studying the weld joint's comprehensive mechanical properties, establish the correct welding process evaluation.

Compression failure force and compression failure energy are two important indexes to the mechanical properties of rice grains.

The chemical and mechanical properties of the electrodes should be as similar as possible to those of the base metal.

Polypropylene fiber has also improvement in residual mechanical properties of concrete subjected to high temperature.

The broken high strength bolt was studied on chemical composition analysis, mechanical properties, micrographic, etc.

Simultaneously, current trends of research for the mechanical properties of materials are indicated.

Effects of fillers and brazing parameters on mechanical properties and microstructures of brazed joints were investigated.

Small diameter resin droplets and symmetrical resin distribution were helpful for improving mechanical properties for OSB.

The mechanical properties of alloys are improved obviously with increasing reciprocating extrusion passes.

Foamed polymers have lower weight (and cost) over their nonfoamed counterparts, and , the mechanical properties are often comparable.

Review dimensional inspection reports, mechanical properties and assist in the evaluation of final functional testing.

OBJECTIVE: To analyze the histocompatibility and mechanical properties of artificial vertebral body.

Besides, mechanical properties of S inlet duct may be affected by bias symmetry layers. In the thesis, this effect is discussed.

Conclusion The mechanical properties of AFS will meet with the physical loading requirement of human acromioclavicular joint.

and water quench process which enable the mechanical properties of wires reaching specified demand of present standards are determined.

It was sulfured at 170 centigrade temperature with average pressure , and investigated through Gel content and mechanical properties.

The two major properties of the conductive adhesive are electrical and mechanical properties.

Finally, a regress equation of tensile strength testing indexes and mechanical properties of the fabric is derived.

The effects of the temperature and the strain ratio on the mechanical properties of polymeric material were first discussed in theory.

The deposition efficiency of welding wires metal, microstructure and mechanical properties of welded joints were studied.

The results show that the mechanical properties of RPC possess high strength, toughness, and abrasion resistance.

The characteristic and mechanical properties of pretensioned cable with small borehole anchored by resin and grout are summarized.

Mechanical properties and durability of ceramic fibre reinforced portland cement composites were studied.

The test results show that the mechanical properties of reactive powder concrete possess high strength and toughness.

Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1 : determination of flexural strength.

With the increase of the coupling agent and GF, the mechanical properties of the composite are improved obviously.

The increased pressure and temperature with depths as well as changed hydrological conditions will lead to changed mechanical properties.

Overheating of components can change the original steel temper and mechanical properties of the affected area.

The microstructure and mechanical properties of the large forged rings have met consumer requirement.

Research shows that by testing and analysis: the mechanical properties of the rock directly related rock breaking.

Compared with halogen flame retardant, the efficiency of halogen-free fire retardant is lower with the drop of mechanical properties.

This produces a fully dense component with the shape of the forging die and appropriate mechanical properties.

Tests for acceptance shall be made after heat treatment of the forging for mechanical properties.

Retention of implanted hydrogen and helium in martensitic stainless steels and their effects on mechanical properties.

The filtering mechanism acting on the solidification and mechanical properties of the alloy was analyzed.

The physical properties, mechanical properties and durability of sand with shell were comprehensively studied.

However, the mechanical properties of reinforced concrete is not available is very comprehensive, particularly in respect of concrete.

The effects of diol content on the dynamic mechanical properties and impact strength of the blends were investigated.

Conclusion It's a tendency to fabricate new coating materials possessing excellent biological and mechanical properties.

Higher temperature corrosion resistance and mechanical properties.

This paper presents extensive test results of linear elastic mechanical properties of Nomex paper and Nomex honeycomb structures.

Numerical simulation with finite element method is adopted to analyze deformation and mechanical properties of layered salt rock.

Further, the propagation period and the main consequences on mechanical properties of steel and concrete are analyzed.

The effects of Ti and B on the microstructure and mechanical properties of AM50 magnesium alloy had been investigated.

It is the intent of this specification to subordinate chemical composition to mechanical properties.

Subjected to critical service environment, oil well pipes have to satisfy stringent requirements for their overall mechanical properties.

The swelling behavior and mechanical properties of the PIC hydrogel could be controlled by changing the charge ratio between HA- and MS .

Electro-discharge machining is independent of mechanical properties of the workpiece.

Ductile cast iron as a light type material with fine mechanical properties has been applied more widely in the automobile industry.

The results showed that the elastomer containing the shorter chain-extender has excellent microphase separation and mechanical properties.

Increasing the intensity of the alloy's skeleton could obviously improve the mechanical properties of the alloys.

China-made excavators, loaders bulldozers, cranes, forklifts and other construction machinery, mechanical properties good work!

The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied.

The cracking of solidified shell due to slab's mechanical properties and their change rules in high temperature.

Effects of alloying elements in the stainless steel and heat treatment on microstructure and mechanical properties were analyzed.

Effects of different particle sizes of bamboo flour on mechanical properties of the composites were studied.

The influences of steel fiber and polypropylene fiber on the mechanical properties of pavement concrete were investigated in this paper.

This paper described the application of neural networks in predicting mechanical properties of cold-rolled ribbed steel wires and bars.

Weld advance side effect for the entire district heating machine mechanical properties of welding the weakest link.

Effects of Ce addition on the microstructures and mechanical properties of the AZ61 alloy have been investigated.

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3 : determination of flexural strength.

The connecting rod with good surface and mechanical properties can be formed by liquid forging.

When micro fine is 24%, mechanical properties of concrete are to be the best.

The ternary boride base cermets have exhibited good mechanical properties and excellent wear and corrosion resistance.

Calculation of heat flux into the gun bore is very important for wear problems in the gun barrel and its thermo-mechanical properties.

Mechanical properties were detected respectively in hardness test, tensile test and impact test experiments.

Influence of microstructure on mechanical properties of mica -based glass-ceramics for dental restorations .

Reticulated shells are typical models of space structures, which have their intrinsic mechanical properties.

The high mechanical properties of impact modified polyamides bring benefits to applications as diverse as power tools or sports articles.