网站首页  词典首页

请输入您要查询的英文单词:

 

单词 laminate
释义
laminates是laminate的复数

laminate

美 [?læm??ne?t]
英 ['læm?n?t]
  • n.层压板;薄片制品
  • v.把(金属等)辗压成薄板;把…切[分]成薄片;用薄板覆盖
  • adj.同“laminated”
  • 网络层压制品;层板;叠层板
复数:laminates  
v.
cover,seal,coat,protect,enclose
v.
1.
把(金属等)辗压成薄板
2.
把...切[分]成薄片
3.
用薄板覆盖
4.
黏合(薄片)
5.
变[分]成薄板[薄片]
1.
把(金属等)辗压成薄板
2.
把...切[分]成薄片
3.
用薄板覆盖
4.
黏合(薄片)
5.
变[分]成薄板[薄片]
n.
1.
薄片制品;层压板
adj.
1.
同“laminated”

例句

释义:
1.
The results show that this analytic method used to solve nonlinear three-dimensional problems for composite laminates is effective.
结果表明,该解析方法对于求解层合板的三维非线性问题是有效的。
hkxb.buaa.edu.cn
2.
The coating can be applied to any coated paperboard substrate, including foil or metallized laminates.
该涂料可用于任何基材涂布白纸板,包括金属箔或金属复合材料。
www.512121.com
3.
In this paper, analytic methods of paste effect of CFRP laminates and several sort of anchor measurement are introduced.
本文还简要介绍了碳纤维布粘贴效果的分析方法,以及用于碳纤维布抗剪加固的几种锚固措施。
www.fabiao.net
4.
Melamine is a chemical that is usually used for coatings, laminates, adhesives, and other industrial applications.
三聚氰胺是一种化学物质,通常是用于制造涂料,复合材料,粘合剂,以及其他工业用途。
www.elanso.com
5.
aerospace series . carbon fibre reinforced plastics . unidirectional laminates . determination of the apparent interlaminar shear strength.
航天航空系列。碳纤维增强塑料。单向层压板。表观层间剪切强度的测定。
www.ichacha.net
6.
currently , only a small proportion of our laminate sales are generated from mass - demand , thin glass epoxy laminates.
目前,需求大之薄环氧玻璃纤维覆铜面板,仅占公司覆铜面板销售额很小比重。
www.ichacha.net
7.
For laminates with a round hole, the degree of stress concentration is between the two above cases.
孔为圆孔时,应力集中程度介于上面两种形状之间。
www.magsci.org
8.
As one of the fast developing PCB factories, we mainly offer single, double sided and multilayer PCB's on standard and exotic laminates.
作为今天电路板行业发展较快的公司之一,主要生产基于常规和特种板料的单双面板,多层印制电路板。
www.pcbtn.com
9.
The results indicate that spring washer can extend the fatigue life of joints of composite laminates by the pre-tightening.
分析表明:弹簧垫圈的预紧作用可延长复合材料层合板螺栓孔处的疲劳寿命;
lib.cqvip.com
10.
Both strain gauge and acoustic emission techniques are used to observe the mechanical behavior of the laminates with increasing load.
采用电测和声发射技术对层压板的受压力学行为进行观测和分析。
hkxb.buaa.edu.cn
1.
aerospace series . carbon fibre reinforced plastics . unidirectional laminates . tensile test perpendicular to the fibre direction.
航空航天系列。碳素纤维增强塑料。单向层压板。垂直于纤维方向的拉伸试验。
www.ichacha.net
2.
The composite structure of the last operation still may be the extrusion coating or adhesive laminates, PE-layer compound.
而这种复合结构的最后工序仍然可能是挤出涂布或粘结层合,把PE层复合上去。
www.bing.com
3.
Melamine is commonly used in coatings and laminates, wood adhesives, fabric coatings, ceiling tiles and flame retardants.
三聚氰胺通常用于涂层、层压板、木胶粘剂、织品涂层、天花板瓦片和火焰阻化剂。
www.showxiu.com
4.
The chemical is commonly used in coatings and laminates, wood adhesives, fabric coatings, ceiling tiles and flame retardants.
用在涂料和层压板,木材粘合剂,织物涂层,天花板的瓦片和阻燃剂。
blog.sina.com.cn
5.
The buckling failure of composite laminates with a surface notch is explored through experiments and analysis.
通过实验研究和理论分析探讨了含表面缺口复合材料层压板的屈曲破坏。
www.dictall.com
6.
We believe that the thin laminates market represents a significant opportunity for sales growth, and commands higher gross profit margins.
公司相信薄环氧玻璃纤维覆铜面板市场拥有显著的销售增长商机,产品毛利率亦较高。
www.t6pr.com
7.
aerospace series . carbon fibre reinforced plastics . unidirectional laminates . flexural test parallel to the fibre direction.
航天航空系列。碳纤维增强塑料。单向层压板。平行于纤维方向的弯曲试验。
www.ichacha.net
8.
aerospace series . carbon fibre reinforced plastics . unidirectional laminates . tensile test parallel to the fibre direction.
航空航天系列。碳纤维增强塑料。单向层压板。平行于纤维方向的拉伸试验。
www.ichacha.net
9.
The composite laminates had excellent dielectric properties, good mechanical properties, good solvent resistance and low water absorption.
复合材料层压板具有优异的介电性能、较好的力学性能、良好的耐溶剂性能和低的吸水率。
www.ceps.com.tw
10.
The present invention discloses a packaging box comprising a substrate, a group of medium laminates as well as a cover plate.
本发明公开了一种包装箱,其包括基板、一组中层板、以及盖板。
ip.com
1.
Laminates of these extensible coforms are prepared with layers of extensible polymeric fibers or filaments.
这些可伸展的共成型体的层压体以可伸展的聚合物纤维或长丝的层制备。
ip.com
2.
The tension, fatigue and impact properties of unidirectional glass fiber reinforced aluminum laminates were researched by experiments.
本文用实验方法研究了单向玻璃纤维-铝合金层板的拉伸性能、疲劳性能和冲击性能。
dictsearch.appspot.com
3.
By means of velocity feedback control agolrithm the active vibration control of laminates is fulfilled.
并采用速度反馈控制实现了层合板的主动振动控制。
www.dictall.com
4.
The filaments and mats may be coated to become tows and laminates, respectively, which may then be assembled into composite materials.
丝和席片可被涂覆,分别形成绳和层制品,然后组装成复合材料。
ip.com
5.
The paper also points out the application prospect for biomimetic laminates composite materials and the developing direction in future.
指出了仿生复合材料的应用前景和今后的发展方向。
www.chemyq.com
6.
An analytical model named fibres bend model (FBM) is presented for the in plane mechanical properties of stitched composite laminates.
提出了一种分析缝纫复合材料层合板面内力学性能的模型即纤维弯曲模型(FBM)。
www.dictall.com
7.
Thermoplastic polymer compositions, films, containers, laminates and fibers can comprise a modified polymer.
热塑性聚合物组合物、膜、容器、层压材料和纤维可以包含两性接枝阻隔材料。
ip.com
8.
The numerical analysis was carried out for the low-velocity impact damages of composite laminates.
进行了复合材料层合板在低速冲击载荷作用下的损伤模拟数值分析。
stae.com.cn
9.
HP supplies are compatible with a broad range of large format and wide-format printers , laminates , accessories and more .
HP耗材可与多种大幅面和宽幅面打印机兼容,可配合压膜、附件等使用。
www.bing.com
10.
The linear relationship between the stress level and fatigue life is obtained for all laminates with impact damage.
结果表明:低速冲击后,材料疲劳寿命的对数与应力水平成线性关系;
epub.cnki.net
1.
A dynamic finite element method is adopted to calculate and study the low velocity impact damage characteristics of stitched laminates.
采用动态有限元素法,计算并研究了缝纫层合板在低速冲击下的损伤情况。
www.dictall.com
2.
The global vibration identification factors of damaged and damage free laminates are obtained by numerical simulation.
通过数值模拟提取结构无损和不同程度面积分层损伤的全局振动标识量;
lxsj.cstam.org.cn
3.
The refined fantasies of wallpapers, floors and laminates turn upside down spaces and perspectives and open new visual dimensions.
精致而充满幻想的壁纸,地板及合成材料,使空间和想象颠倒并打开新的视觉视野。把空间和物体作为主角。
www.red-bookstore.com
4.
Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.
航空和航天.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验
www.mapeng.net
5.
Additional halogens are added to PCB laminates through glass sizes, wetting agents, curing agents and resin accelerators.
卤素还会以其他形式添加到PCB中,例如玻纤胶料,润湿剂,固化剂,树脂促进剂,等。
wenku.baidu.com
6.
The rehabilitation of reinforced concrete structures with CFRP laminates is a new reinforcement technique.
碳纤维布加固混凝土结构是一种新型的结构加固方法。
www.fabiao.net
7.
By-pass diodes are connected across each cell, allowing the laminates to produce power even when partially shaded or soiled.
每一个电池单元均通过旁路二极管连接,即使组件部分的被遮挡或污染,也能够正常的输出电力。
www.42828.com
8.
Glass yarn is the basic material for weaving into glass fabric which itself is the key reinforcement material for glass epoxy laminates.
玻璃纱为织造玻璃纤维布的基本材料,本身亦是玻璃纤维覆铜面板的主要强化物料。
www.t6pr.com
9.
Finally, the method of strengthening concrete beam bridge with prestressing presoaked CFRP Laminates was probed.
最后,探讨了预应力碳纤维预浸带应用于混凝土梁桥的加固施工方法。
www.fabiao.net
10.
Some problems about the application of plane orthotropic boundary elements to more general composite laminates are studied in this paper.
本文研究了在复合材料层合板中运用平面二次边界元法的有关问题。
www.chemyq.com
1.
The product can be widely used in wood, plywood, decorative laminates , such as the bonding plate.
该产品可广泛用于木材、胶合板、层压板等装饰板的粘接。
dictsearch.appspot.com
2.
The delamination rate of green wood laminates after air-drying is more than 10%. Further study will be required for improving the quality.
生材集成材经乾燥后之剥离率超过10%,效果不彰,须进一步检讨与改善。
dictsearch.appspot.com
3.
In composite laminates there are four basic failure modes: matrix cracking, delamination , fiber breakage and debonding.
复合材料层合板中存在四种基本的失效模式,即:基体开裂、分层、纤维断裂及脱粘。
dictsearch.appspot.com
4.
The determination of the delamination fracture toughness is the key problem of the study for the delamination damage of composite laminates.
复合材料层板脱层断裂韧性的确定是复合材料层板脱层研究中的关键问题。
www.chemyq.com
5.
I handled them carefully before gluing them into the stator laminates.
老子处理他们之前仔细粘合成定子层板。
www.tech-domain.com
6.
The impact force of laminates and sandwich panels in low velocity impact loadinghas been measured and calculated.
本文对层板和夹芯板受硬物低速撞击的撞击力进行了计算和测量。
www.dictall.com
7.
Use of the dispersion, of the preparation or of the cured product for the preparation of laminates.
分散体、制备物或固化产品用于制备层压制品的用途。
ip.com
8.
Fiber Reinforced Metal Laminates (FRMLs) are used widely for modern industry with excellent mechanical properties.
纤维增强金属层合板,因其优异的综合性能而广泛应用于现代工业中。
www.stae.com.cn
9.
We want to buy Pcp Products, Copper Clad Laminates, Semiconductors, Ic Electrical Goods, Equipment and Supplies.
我们要采购五氯酚产品,覆铜箔层压板,半导体,集成电路,电器,设备和供应品。
www.easytrade.com
10.
In this paper, the experiments for two kinds of glass fiber epoxy laminates is carried out by using speckle interferometry.
采用散斑干涉法,对两种铺层方式的环氧基玻璃纤维层合板的弹性模量、泊松比和应力-应变曲线进行了实验研究。
www.dictall.com
1.
The present work is to study the effect of damage on the vibration performance of composite laminates.
本文旨在找出损伤对复合材料层合板振动特性的影响。
www.dictall.com
2.
Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, and Materials Used in Printing Wiring Boards
聚合材料。印制线路板用工业层压板、丝绕管件、硫化纤维和材料
www.isres.com
3.
Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength
碳纤维增强塑料.单向层压板.层间表面剪切强度的测定
www.mapeng.net
4.
Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength
航空和航天。纤维增强塑料。多向层压板的检验。缺口抗压强度的测定
www.std168.com
5.
Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of compressive strength after impact test
航空和航天。纤维增强塑料。多向层压板的检验。冲击负荷后抗压强度的测定
www.std168.com
6.
Phenomenological Research Models for the Fatigue of Composite Laminates and Its Application
层板复合材料疲劳性能的唯象学研究模型及其应用
www.ilib.cn
7.
Finished glass fabrics used for copper clad laminates and other electric purposes
电子仪器用加工玻璃织物
www.ybqi.gov.cn
8.
Aerospace series - Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction
航空航天系列碳纤维增强热固树脂单向叠层板平衡纤维方向的压缩测试
www.mapeng.net
9.
Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength
航空和航天.纤维增强塑料.多向层压塑料的检验.孔壁强度的测定
www.mapeng.net
10.
Experiment Study of Stiffness Degradation for Damaged Composite Laminates
复合材料层板损伤后刚度衰退的实验研究
www.ilib.cn
1.
Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction
航空和航天。纤维增强塑料。单向层压制品的检验。与纤维方向垂直的压力试验
www.std168.com
2.
Experimental study of effects of freeze-thaw cycle on concrete columns strengthened with FRP laminates
冻融循环对FRP增强混凝土柱影响试验研究
www.ilib.cn
3.
Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension
航空和航天.纤维增强塑料.单向层压制品的检验.拉伸剪切强度和剪切模数的测定
www.mapeng.net
4.
Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength
航空和航天。纤维增强塑料。多向层压板的检验。缺口抗拉强度的测定
www.std168.com
5.
Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
碳纤维叠层板材.单向叠层板材.垂直于纤维方向的拉伸试验
www.mapeng.net
6.
Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction
航空和航天。纤维增强塑料。单向层压制品的检验。与纤维方向垂直的拉力试验
www.std168.com
7.
Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction
碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验
www.mapeng.net
8.
Experiment and Calculation of Bearing Capacity of Concrete Columns Strengthened with Carbon Fiber Reinforced Polymer Laminates
碳纤维布加固混凝土方形截面柱的轴心受压试验及承载力计算
www.ilib.cn
9.
Testing Study of Method of Separating Rigidity in the Testing of Mechanical Properties of One-way Bamboo-stripe Laminates
分离刚度法在单向竹篾积成胶合板机械性质测试中的应用研究
www.ilib.cn
10.
A Study of the Mechanical Properties of Composite Laminates with Holes
含孔复合材料层板的力学性能研究
www.ilib.cn
1.
Experimental Research on Mechanical Properties for Glass Fiber-epoxy Matrix Multidirectional Laminates
环氧基玻璃纤维层合板力学性能的实验研究
ilib.cn
2.
Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction
碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验
www.mapeng.net
3.
Influence of degree of cure and cure shrinkage on the finial deformation of the unsymmetric composite laminates
固化度与固化收缩对非对称复合材料层合板固化变形的影响
168.160.184.78
4.
An Effective Test Method for Characterization of Impact Damage and Gaining the Compression Properties after Impact of Composite Laminates
复合材料冲击损伤及冲击后压缩强度的等效实验方法
www.ilib.cn
5.
buckling analysis of locally delaminated symmetrical laminates subjected to non - conservative forces
具有局部分层的对称铺设层合板在非保守力作用下的屈曲分析
www.ichacha.net
6.
the remarkable operating performance has put kingboard laminates in an excellent position to invest in future earnings growth
集团取得卓越的营运表现,为未来的盈利增长建立了良好的优势。
www.ichacha.net
7.
Ballistic impact properties of the fabric and its composite laminates
织物及其复合材料的弹道冲击性能
www.ilib.cn
8.
A FRP Cumulative Damage Model and Its Application to Fatigue Life Evaluation of Composite Laminates
一种FRP累积损伤模型及其在结构疲劳寿命估算中的应用
www.ilib.cn
9.
Optimal Design of Composite Laminates Subject to Natural Frequency Constraint Using an Improved Genetic Algorithm
基于改进遗传算法的复合材料层合板自振频率优化设计
www.ilib.cn
10.
Contact effect on dynamic response of stiffened laminates with a delamination
含分层损伤复合材料加筋板动力响应分析接触效应
scholar.ilib.cn
1.
Nonlinear dynamic instability behavior of delaminated composite laminates
含分层损伤复合材料层合板非线性动力稳定性
168.160.184.78
2.
Preparation and properties of toughened bismaleimide matrix resins and glass cloth reinforced laminates;
压制得到的玻璃布层压板具有良好的力学性能和电气性能。
www.dictall.com
3.
Aerospace; fibre reinforced plastics; determination of cracking frequency on laminates
航空和航天。纤维增强塑料。层压制品裂纹频度测定
www.std168.com
4.
New Methodology for Evaluating Toughness of Composite Laminates-Investigation of Damage Resistance
复合材料韧性评定的新方法关于损伤阻抗性能的研究
www.ilib.com.cn
5.
Adaptive immunity genetic algorithm for thermal buckling optimization of composite laminates
复合材料层压板热屈曲优化设计的自适应免疫遗传算法
www.ilib.cn
6.
Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents
航空航天系列碳纤维叠层板材纤维、树脂含量和空隙率的测定
www.mapeng.net
7.
Experimental Study on the Stiffness Degradation of Composite Laminates under Constant Amplitude Loading
常幅疲劳载荷下复合材料层合板刚度退化试验研究
service.ilib.cn
8.
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
纤维板暴露在热和水条件下粘结强度测定的标准试验方法
www.isres.com
9.
Research of deformation model and resistance characteristic for laminates under ballistic impact
弹道冲击下层合板破坏模式及抗弹性能实验研究
scholar.ilib.cn
10.
Study on compressive properties of composite laminates with edge rectangular delamination defect
含矩形边缘分层缺陷层合板的压缩性能
168.160.184.78
1.
Visualization Data Processing of Composite Laminates Fatigue Experiment
层板复合材料疲劳性能实验数据的处理
service.ilib.cn
2.
Interlaminar stress and damage mechanism of thermoplastic composite laminates
热塑性复合材料层合板的层间应力与损伤机理
www.ilib.cn
3.
High-pressure decorative laminates - Composite elements - Test methods
高压装饰性叠层板材.复合成份.试验方法
www.mapeng.net
4.
Experiment on Creep Behaviors and Ultimate Bearing Capacity of Short Concrete Columns Confined with CFRP Laminates
CFRP片材约束混凝土短柱徐变性能及极限承载力试验
service.ilib.cn
5.
Predictions for the Strengths of Symmetry Composite Laminates Under Matrix Cracking
复合材料对称层合板的强度预测
www.ilib.cn
6.
Experimental Technology for Fatigue Behaviour Testing of Composite Laminates
层板复合材料疲劳性能测试实验
www.ilib.cn
7.
Properties of stitched composite laminates--the principle properties of simple laminates
缝合复合材料可用性--简单层合板的基本性能
www.ilib.cn
8.
Analysis of stress concentrations in cross-ply (hybrid) laminates taking into account interfacial damage
计及界面损伤的复合材料正交(混杂)叠层板的应力集中分析
www.ilib.cn
9.
An optimum design method for composite laminates considering coupling effect between bending and tension
一种考虑拉弯耦合的复合材料层板的优化设计方法
www.ilib.cn
10.
The measurement revealed that fabric thread count has great impact on the tensile strength and elongation at break of laminates;
测试结果表明:织物中纱线的密度对层合板的强力和断裂伸长率有重要影响;
www.chemyq.com
1.
The growth laminates of biological shell and the evolution of orbital parameters of the Earth-Moon from Ordovician to Quaternary
奥陶纪以来生物贝壳生长纹层与地月轨道参数的演化
www.ilib.cn
2.
On the Calculation of Energy Release Rate for Viscoelastic Cracked Laminates
含有界面裂纹的粘弹性层合板应变能释放率的计算
scholar.ilib.cn
3.
Determining Impact Tensile Properties of Orthogonally Anisotropic Composite Laminates
正交复合材料层板冲击拉伸力学性能研究
ilib.cn
4.
Composite Laminates Deformation Analysis and Calculation After Curing
复合材料叠层板固化成型后的变形分析计算
168.160.184.78
5.
Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
聚合物基体复合层压制品的已填料孔拉伸和压缩试验的标准实施规范
www.mapeng.net
6.
Experimental study on quasi-static indentation damage resistance of composite laminates
复合材料层合板准静态压痕实验研究
168.160.184.72
7.
Time-dependent reliability analysis of existing bridges strengthened with FRP laminates
既有桥梁外贴纤维布加固后可靠度分析
scholar.ilib.cn
8.
Modification of Wave Characteristics of Composite Laminates by Inverse Eigenvalue
一种基于特征值反求的复合材料层合板波动特性的近似修改方法
www.ilib.cn
9.
Forming characteristics of thermoplastic fibre-metal laminates
纤维金属层板成形性研究
www.ilib.cn
10.
Fatigue Life Prediction of Fiber Reinforced Metal Laminates Under Variable Amplitude Loading
变幅载荷下纤维金属层板的疲劳与寿命预测
service.ilib.cn
1.
Experimental study on the structure optimization of anti-ballistic composite laminates
层合板抗弹混杂结构优化试验研究
www.ilib.cn
2.
Image Reconstruction and Enhancement of Pulsed Infrared Thermography of CFRP Laminates
CFRP层压板脉冲热像检测的图像重建与增强
www.ilib.cn
3.
Experimental Research on the Fatigue Properties of Different Composite Laminates
不同层板复合材料疲劳性能试验研究
service.ilib.cn
4.
Polyimide Copper Clad Laminates Using Different Reinforcing Material
采用不同增强材料的聚酰亚胺覆铜板
service.ilib.cn
5.
Three-dimensional finite element analysis of piezoelectric laminates
压电层合板的三维有限元分析
ilib.cn
6.
The Manufacture of Three-dimensional Woven Fabric Reinforced Composite Laminates
三维机织物增强复合材料板材的研制
www.ilib.cn
7.
Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
挠性材料制类似层压制品的粘结强度或层间粘结度比较的试验方法
www.chinastandard.com.cn
8.
Aerospace; boron fibre reinforced mouldings, preparation of test laminates
航空和航天.硼纤维增强的模塑材料.塑料层压试制品的生产
www.mapeng.net
9.
A New Fatigue Residual Stiffness Statistical Distribution Model for Composite Laminates
层板复合材料的疲劳剩余刚度统计分布模型
www.ilib.cn
10.
Rules for testing methods for laminates; vulcanized fibres for electrical engineering
层压材料试验规则。电工用硫化纤维材料
www.std168.com
1.
Analysis on Time-dependence Deformation of Concrete Beams Strengthened with CFRP Laminates
碳纤维布加固混凝土梁时效变形分析
www.ilib.cn
2.
Calculation of flexural strength of RC beams strengthened with bonded prestressed FRP laminates
外贴预应力FRP片材加固混凝土梁抗弯承载力计算
www.ilib.cn
3.
Durable High Performance Adhesive-Bonded Allergen Barrier Laminates and Process for Making Same
具有耐久性的与高性能粘合剂结合形成的过敏原阻碍层压制品及其制造方法
blog.sina.com.cn
4.
study of transverse cracking in cross - ply laminates
正交叠层板横向开裂问题的研究
www.ichacha.net
5.
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
用短梁法测定平行纤维组合材料表观层间剪切强度的试验方法
www.wwlww.com
6.
Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
聚合基复合层压板的疲劳反应承受规程
www.wwlww.com
7.
An Experiment Study on Dynamic Fracture Toughness and Damage Expansion for Composite Laminates
复合材料层合板动态断裂韧性与损伤扩展的实验研究
www.ilib.cn
8.
Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
玻璃纤维增强塑料层合板层间拉伸强度试验方法
angel.w15.5tom.cn
9.
Discussion on Manufacturing Process of Unsymmetric Composite Laminates
不对称铺层复合材料制造工艺探讨
www.ilib.cn
10.
Calculations of principal linear optimization in the bend conditions of rigid plastic laminates
硬塑薄壳屈服条件下的最优线性化估算
scholar.ilib.cn
1.
Impact resistance of Flax reinforced polypropylene laminates
亚麻增强聚丙烯复合材料薄板的冲击性能
www.ilib.cn
2.
Investigation into the Transverse Initial Cracking in Cross-ply Laminates
正交叠层板横向初始开裂问题的研究
www.ilib.cn
3.
Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
印制线路用镀铜热固层压板规范
www.isres.com
4.
Theoretical Study on the Penetration and Perforation of FRP Laminates Struck by Cone-Nosed Projectiles
锥头弹丸撞击下FRP层合板的侵彻与穿透的理论研究
www.ilib.cn
5.
Trial of Test Methods for Bow and Twist of as Received and After Heated Cellulose Paper and Composite Copper Clad Laminates
纸基·复合基覆铜箔板常态及受热后的翘曲测试方法的试用
www.ilib.cn
6.
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
聚合物基体复合层压材料的开洞耐压强度的测试方法
www.wwlww.com
7.
Damage Progressive Model of Compression of Composite Laminates After Low Velocity Impact
复合材料层合板低速冲击后压缩的损伤累积模型
www.ilib.cn
8.
High-pressure decorative laminates - Sheets made from thermosetting resins - Part 2: Determination of properties
高压装饰板.热固性树脂制薄板.第2部分:性能测定
www.mapeng.net
9.
Methods of improving the interlaminar strength of fabric-reinforced laminates
织物增强复合材料层合板层间强度的改善方法
www.ilib.cn
10.
Shaped fiber reinforced composites and high-performance copper clad laminates
异形纤维复合材料与高性能覆铜板
ilib.cn
1.
Research on durability of concrete structures strengthened with FRP laminates
纤维增强聚合物加固混凝土结构耐久性能研究
www.ilib.cn
2.
Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
挠性阻挡层和叠层板材抗慢速渗透性的试验方法
www.standardcn.com
3.
Investigation into the Multiple Transverse Cracks in Cross-ply Laminates
正交叠层板的多级横向开裂问题
www.ilib.cn
4.
Penetration and perforation of FRP laminates under normal impact by ogival-nosed projectiles
卵形弹丸撞击下FRP层合板的侵彻和穿透
168.160.184.78
5.
Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
印刷线路板用铜覆层热固层压材料的标准试验方法
www.mapeng.net
6.
Experimental Research on the Tensile Properties of CFRP Laminates for Structure Repair
结构加固用CFRP片材拉伸性能的试验研究
ilib.cn
7.
Analytical Model for the In-plane Properties of Stitched Composite Laminates
缝纫复合材料层合板面内性能的分析模型
www.ilib.cn
8.
Progress in the Environmentally Friendly Flame Retarded Copper Clad Laminates of Epoxy Resin
环境友好阻燃环氧树脂覆铜板研究进展
www.ilib.cn
9.
Transverse Cracking of Cross-ply Laminates Subjected to Biaxial Extension Loading
正交层板受双向拉伸时的横向开裂
www.ilib.cn
10.
Test method for compressive properties of fiber reinforced plastic thin laminates
纤维增强塑料薄层板压缩性能试验方法
angel.w15.5tom.cn
1.
Influence of Ply Stacking Hybrid on Penetration Properties of Composite Laminates
铺层混杂对复合材料层压板侵彻性能的影响
www.ilib.cn
2.
Experiment and Analysis on Mechanical Properties of Stitched Laminates
缝合复合材料层板面内力学性能试验与分析
www.wenloo.com
3.
The Researches on Low Energy Impact Damage and Residual Tensile Strength of Composite Laminates
复合材料层合板的低能冲击损伤及剩余拉伸强度研究
www.ilib.cn
4.
New Research on Interlaminar Stresses in Piezoelectric Laminates
压电层合板层间应力新研究
www.ilib.cn
5.
Fatigue Life Predication of Notched Composite Material Laminates
含孔复合材料层合板疲劳寿命预测研究
www.ilib.cn
6.
The Study on the Stress Concentration Coefficient of the Composite Laminates with a Circle Hole
带圆孔复合材料层合板应力集中系数的研究
www.ilib.cn
7.
Energy Release Rates of Surface Crack in Functionally Graded Laminates under Thermal Shock
热冲击下层状梯度材料表面裂纹的能量释放率
www.ilib.cn
8.
Strength Analysis on Adhesive Bonding Repair of Damaged Composite Laminates
损伤复合材料层板胶接修理强度分析
www.ilib.cn
9.
Advances in Damage Analysis for Carbon Fiber-reinforced Composite Laminates with Hole
碳纤维增强复合材料含孔层合板损伤破坏分析研究进展
www.ilib.cn
10.
Analysis and Design of Structural Strengthening of Concrete Slabs Using FRP Laminates
FRP加固钢筋混凝土板的分析与设计
service.ilib.cn
1.
Sectional Warping Corrective Model for Free Edge Stresses in Composite Laminates
复合材料叠层结构边缘应力分析的翘曲修正模型
168.160.184.78
2.
Linear Viscoelastic Behavior of Composite Laminates with Cross-Ply Matrix Cracks
基体开裂的正交复合材料对称层合板的粘弹性力学行为
service.ilib.cn
3.
Application of Progressive Damage Method on Bolted Joints in Composite Laminates
累积损伤方法在复合材料接头研究中的应用
www.ilib.cn
4.
Dynamic Simulation for Composite Laminates DamageProcess due to Low Velocity Impact
复合材料层板低速冲击损伤有限元模拟
www.ilib.cn
5.
Calculations of Cure Deformation of Single-Curved Composite Laminates
单曲面复合材料层合构件的固化变形计算
www.ilib.cn
6.
Buckling and Postbuckling Analysis of Nonlinear Composite Laminates with Delamination
非线性复合材料层板分层屈曲及后屈曲分析
www.ilib.cn
7.
Acousto-Ultrasonic Assessment of Mechanical Properties of Composites, Laminates and Bonded Joints
复合材料、叠层板材和粘接件的机械性能的声学超声波评定
www.isres.com
8.
Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates
聚合物基体复合层压材料的开洞张力强度的标准试验方法
www.mapeng.net
9.
Advances of Study on Low Velocity Impact Damaged and Residual Strength of Composite Laminates
复合材料层合板冲击损伤及剩余强度研究进展
service.ilib.cn
10.
Quasi-Static Penetration Mechanism of Composite Laminates
织物-树脂复合材料层压板的准静态侵彻机理
168.160.184.72
1.
The Experimental Study on Fatigue Behaviors of Notched Composite Laminates
缺口复合材料层合板疲劳性能的试验研究
www.ilib.cn
2.
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
高聚物基块复合板的轴承灵敏度的标准测试方法
www.mapeng.net
3.
Preparation of Copper Clad Laminates Based on Polytetrafluoroethylene with Blending Modification
共混改性聚四氟乙烯覆铜板的制备
scholar.ilib.cn
4.
Numerical Simulation of FRP Laminates Subjected to Projectile Impact
纤维复合层压板抗贯穿的数值仿真
www.ilib.cn
5.
Influence of Interfacial Damage on Ultimate Tensile Strength of Cross-Ply Laminates
界面损伤对正交叠层板最终拉伸强度的影响
www.ilib.cn
6.
Meso-Mechanical Analysis of Stiffness Reduction of FRP Laminates by Fibre Breaking
纤维断裂引起层合板多向刚度减缩的细观力学模型
www.ilib.cn
7.
Advances of Study on Fatigue Life Prediction of Impact-damaged Composite Laminates
含冲击损伤的复合材料层合板寿命的研究进展
service.ilib.cn
8.
Element Failure Model in Series for Fatigue Life Prediction of Composite Laminates
复合材料层合板疲劳寿命分析的系列单元失效模型
service.ilib.cn
9.
A Micromechanical Investigation for Thermo-plastic Composite Laminates
热塑性复合材料层合板层间细观力学研究
www.ilib.cn
10.
Forced Vibration of Symmetric Cross-Ply Laminates on Elastic Foundations
弹性地基上对称正交铺设层合板的受迫振动
www.ilib.cn
1.
Epoxide cellulose paper core, glass cloth surfaces copper-clad laminates
环氧玻璃布纸复合覆铜箔板
2004.smt.cn
2.
Propagation process of fatigue crack normal to the interface of bimetallic laminates
双金属层合板垂直界面裂纹疲劳的扩展过程
www.ilib.cn
3.
Technology Assessment Handbook on Laminates
层压板技术评估手册
info.pcbtn.com
4.
A Study on the Strengthening Technology with Prestress Fiber Laminates for T-type Beam Bridge
预应力纤维薄板加固T型梁桥技术探讨
scholar.ilib.cn
5.
Experiment Study on RC Continuous Beams Strengthened with FRP Laminates
FRP片材加固钢筋混凝土连续梁试验研究
www.ilib.cn
6.
Mode I Interlaminar Fracture Toughness of Stitched Laminates
缝合层合板的I型层间断裂韧性研究
www.ilib.cn
7.
Comparison of Anti-alkali between Bisphenol-A Epoxy Vinyl Ester Resins and FRP Laminates
双酚A型环氧乙烯基酯树脂及层合板的耐碱性比较
168.160.184.82:8080
8.
Study on Stress Concentrations and Strengths of Notched Cross-ply Laminates
割口正交叠层板的应力集中及强度
www.ilib.cn
9.
Studies on Quasi-static Indentation Damage of Composite Laminates
复合材料层合板准静态压痕损伤研究
www.ilib.cn
10.
PCB Laminates Performance in High Temperature Lead-free Soldering
多种PCB基材在高温无铅焊接中的表现
www.ilib.cn
1.
Standard Test Methods for Bond Integrity of Transparent Laminates
透明层压材料粘结完整性的试验方法
www.std168.com
2.
State-Vector Equation With Damping and Vibration Analysis of Laminates
考虑阻尼的状态向量方程和层合板的振动分析
www.ilib.cn
3.
Application of Laminates Template to Complex Structure
多层板模板在复杂结构中的应用
service.ilib.cn
4.
Approximate Analysis for Bending and Vibration of Laminates
层合板弯曲与振动的近似计算
ilib.cn
5.
Effects of micro-crack damages on delamination of composite laminates
微裂纹损伤对复合材料层板分层的影响
www.ilib.cn
6.
The J-Integral Criterion of Interface Fracture in Composite Laminates
复合材料层压板界面裂纹的J积分判据
www.ilib.cn
7.
Strength Analysis for Multiple Double-Lapped Joints in CFRP Laminates
复合材料层合板单排多钉双剪联接接头强度分析
www.ilib.cn
8.
Study on Compressive Properties of Stitched Laminates
缝纫层合板压缩性能研究
www.ilib.cn
9.
Study on the Post-Impact Compressive Strength of Composite Laminates
复合材料层板低速冲击剩余强度的研究
www.ilib.cn
10.
Review of Studies of Biomimetic Laminates Composite Materials
仿生层状复合材料研究概况
www.ilib.cn
1.
epoxide cellulose paper copper - clad laminates epoxy paper ccl
环氧纸质覆铜箔板
www.ichacha.net
2.
Effect of Stitching on the In-plane Tensile Strength of Stitched Composite Laminates
缝纫对复合材料层板面内单向拉伸强度的影响
www.ilib.cn
3.
Epoxide synthetic fiber fabric copper-clad laminates
环氧合成纤维布覆铜箔板
2004.smt.cn
4.
Preparation of Copper Clad Laminates with High Performance BT Resin
高性能BT树脂基覆铜板的研制
www.ilib.cn
5.
Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints
复合材料,层板以及粘接件声-超声评定指南
www.ndtinfo.net
6.
Experimental research on defects of L-shape laminates in vacuum-bag process
L形层板真空袋成型缺陷的实验研究
www.ilib.cn
7.
Analysis of nonlinear dynamic stability of composite laminates based on higher order shear deformation theory
基于高阶剪切理论的层合板非线性动力稳定性
www.ilib.cn
8.
Analysis of Damaging Failure of Composite Laminates
复合材料层板损伤失效分析
www.ilib.cn
9.
Prediction of In-plane Tensile Strength of Stitched Laminates
缝合复合材料层板的面内拉伸强度预报
www.ilib.cn
10.
A Study on the fatigue behavior of RC beams strengthened with fiber laminates
循环载荷下纤维薄板增强RC梁的疲劳性能研究
www.ilib.cn
1.
Prediction of stiffness of stitched laminates
缝合复合材料层板刚度预报
www.ilib.cn
2.
Research on Interface Properties in Laminates
叠层材料界面性能的研究进展
service.ilib.cn
3.
Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics
用粗纺丝和玻璃纤维丝分层压制成的塑料制品
www.mapeng.net
4.
Optimum design of the reliability for composite laminates based on genetic algorithm
基于遗传算法的层合板结构的可靠性优化设计
www.ilib.cn
5.
Probabilistic Robust Design of FRP Laminates
纤维复合材料层合板的鲁棒设计研究
www.ilib.cn
6.
Smoother Glass Fibre Laminates for Circuit Boards
用于电路板的较平整的玻璃纤维层膜
www.ilib.cn
7.
FRP Laminates-test method for bearing strength by bolted joints
纤维增强塑料层板螺栓连接挤压强度试验方法
blog.globalimporter.net
8.
Synthesis and reaction kinetics of diglycidyl ether of bisphenol-A for copper clad laminates
覆铜箔层压板专用双酚A二缩水甘油醚的合成及反应动力学
www.ilib.cn
9.
Tensile Strength of Stitched Laminates
缝合复合材料层板抗拉强度的预测
www.ilib.cn
10.
Copper Foil Adhesives for Paper Base Copper-Clad Laminates
纸基覆铜箔板专用胶粘剂的研究
www.ilib.cn
1.
The Manufacture and the Tensile Properties of Glass Fibre 3-D Fabric Reinforced Composite Laminates
玻璃纤维3D机织物增强复合材料板材的研制与其拉伸性能研究
www.ilib.cn
2.
Testing Inplane Shear Properties of Composite Laminates
复合叠层板材的平面内剪切特性的试验
www.mapeng.net
3.
New Development of Processing Techniques for Laminates
层叠复合材料加工技术新进展
www.ilib.cn
4.
A Fatigue Residual Strength Model for Composite Laminates Based on Residual Stiffness Ratio
复合材料层板基于剩余刚度比的剩余强度模型
www.ilib.cn
5.
Parameterized Simulation for Composite Laminates with Single Mechanically Fastened Joint Based on ANSYS
基于ANSYS的复合材料层合板单钉连接件参数化结构仿真
www.ilib.cn
6.
Cloth glass finished for resin laminates
树脂层压板玻璃纤维精加工
www.ybqi.gov.cn
随便看

 

英汉双解词典包含2704715条英汉词条,基本涵盖了全部常用单词的翻译及用法,是英语学习的有利工具。

 

Copyright © 2004-2022 Newdu.com All Rights Reserved
更新时间:2024/12/26 2:44:54