AFM

The surface morphology of the films were observed by Scan Electron Microscope (SEM) and Atom Force Microscope (AFM) respectively.

The surface morphology of the polymer film was examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM).

The obtained results were compared with the surface morphology information at nanometer size from atomic force microscopy (AFM).

The surface morphology of the thin film prepared from the polymer was studied via atomic force microscope (AFM).

AFM image shows that the silica membrane on the ceramic support is continuous and the surface is relatively even and smooth.

Complementary techniques used in combination with AFM for study of microbes are also discussed.

The results show that it is feasibility to simulate the wear and interaction of a nano-particle of the CMP on the wafer with AFM.

Quality and reliability analysis. AFM as well as the XRD results both demonstrate the good crystallinity of the thin-film after annealing.

However, for some types the AFM notes a correction that must be made to the Indicated Mach to provide the True Mach.

The Model AFM air flow monitor-alarm, is a single probe instrument used for detecting mass air flow in air ducts.

Thus, using the AFM it is possible to resolve individual vesicles and follow changes in vesicular structure.

Atomic force microscopy (AFM) has been widely used to investigate structures and mechanical properties of materials on surfaces.

The surface morphology of Sr-doped PZT thin film is obtained by AFM.

The scratch damage of the materials was characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and profiler.

Atomic force microscope (AFM) was used to characterize the cellulose nanocrystal.

The atomic force microscope (AFM) was used to directly image purified synaptic vesicles.

With its resolution at atomic level, the AFM is a powerful tool for cell biological study.

At high concentration, the ultrastructure of different collagen fibril was also different. By AFM the differ. . .

The scenario is explored in Hubbard model including electron-electron couplings mediated by antiferromagnetic(AFM) spin fluctuation .

A method and controller for operating cruise control in a vehicle having an engine with active fuel management (AFM) is provided.

Conclusion AFM is an excellent instrument for observe the subcellular ultrastructure.

Local oxidation nanofabrication by AFM is a promising method to produce nano structure. It has a wide field of application.

The AFM surface morphology shows that the microstructure of the aluminum oxide thin films deposited is column.

Edguy sign their record deal with a small German label called AFM Records.

The AFM measurement data of the same sample is processed by these two methods, and analysis and comparison of measurement result are made.

After all the mode of Atomic Force Microscope(AFM) are analyzed, this dissertation introduces the design of AFM in Tapping mode.

The properties and morphology of the coating were analyzed by using electrochemical methods and atomic force microscopy (AFM).

The resulting surface structures were examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM).

The irradiation process and surface morphology of the films were analyzed by atomic force microscopy (AFM).

Atomic force microscopy (AFM) has provided a new and powerful tool in the investigation of single atoms, molecules and their interactions.

The present invention relates to a cruise control and active fuel management (AFM) interaction.

Atom force microscope (ATM) is a important analytical and testing instrument developed rapidly in recent years.

For the UV materials ZnO, the ruslte of raman spectra on surface characterization access to that measure by AFM.

The novel dual head system of the Solver Next offers both atomic force (AFM) and scanning tunnelling microscopy (STM) under one hood.

The testing results verify the feasibility of the nanobending method for testing the Young's modulus of nano film materials based on an AFM.

The composite films were characterized by Fourier transform infrared (FT-IR) and atomic force microscopy (AFM).

AFM spectrum indicated that after certain storage period, liquor presented globular shape and the distribution was even.

This paper proposes a learning control based high-speed scanning mode for an AFM system.

The application of AFM lithography in nano fabrication of multi-layer pattern was focused on the basis of AFM oxidation theory.

Atomic force microscope(AFM)has become a powerful tool for the characterization of bio-samples surfaces.

Atomic Force Microscopy (AFM) is a main instrument for nano-scale measurement and manipulation.

AIM: To investigate the application of atomic force microscope (AFM) in clinic diagnosis.

The media developed by optimum process variables mainly governs the performance of AFM.

Take the AFM, a French patient advocacy group that focuses on ignored genetic diseases.

Using atomic force microscopy (AFM) to image the micro-structure of the original corn starches and the cold water soluble starches.

Go ahead, managers, make my day. Are your days all about AFM, or is management actually just one big party?

Inside lining is made of sheath, front guard board and back guard board, which is made of AFM and rubber cloth.

AFM results indicate that the Zr films have columnar structure.

Then the dispersity was evaluated with settlement time. And laser particle size analyzer, SEM and AFM were employed to confirm the results.

Algorithms of interior nodal generation and AFM triangulation in 2-DIM multi-connected regions are studied.

AFM was my initial impression of managment: another effing meeting.

On this paper, the characteristic parameters of poplar wood cell were measured based on AFM.

Presently, there are many techniques and one among them is abrasive flow machining (AFM) process.

The AFM figure of film indicated that the film had fine and close texture.

Now, Noji and colleagues have used AFM to record a sequence of frames of the rotorless F1 component (the catalytic stator ring).

The analyzed of AFM suggested that there are many holes on the film surface.

Objective: To image the structure of the lipid bilayer at the nanometer level with AFM.

The composition, surface morphology and phase structure of the films were tested by EDXA, FSEM, AFM and XRD, respectively.

The growth mechanism of aragonite calcium carbonate whisker was studied by measuring induce time and AFM method.

The structure of the nucleosome core particle of chromatin in chicken erythrocytes has been examined by using AFM.

In this work, we review the recent development of AFM applications in the microbial area.

The AFM head is mounted without Abbe error in the X and Y directions.

A variety of samples were scanned by using this AFM system.

This is real AFM, Atomic Force Microscope data from my colleagues in the Solid State Lighting and Energy Center.

The adiabatic shear band is higher than the basic phase by AFM.

Comparison is made between AFM and surface force apparatus (SFA) measurements, as there is a much longer history of work with the latter.

Single molecule force spectroscopy (SMFS) is a force measurement based on AFM.

It is believed that AFM should play a more and more important role in biomedicine study.

Reverse reposition imaging technique of AFM used to compare the topography of the master, stamp and the pattern in soft lithography

Design and Construct of a High-Precision and Long-Stroke AFM Probe-Unit Integrated with a Linear Encoder

Study of the characteristics of different chitosan films affected by different organic solvents by AFM

Comparative study of the localization and conformation of immunocomplexes single molecule of NMDA receptor protein on neuron membrane by AFM

AFM was Used to Observe Interaction between Mouse Cardiac Nuclear DNA Fragment in vitro Transcription and Junk DNA

The preliminary study of surface topography and optical properties of lymphocyte with AFM and SNOM

Simulation for an Abrasive Particle of the Chemical Mechanical Polishing with AFM

Study of Adsorption of Surfactant and its Compound on Mica Surface by AFM

Measurement and characteristic evaluation of target circumferential topography with AFM

Fabricating using AFM and etching on crystalline silicon in alkaline solution and electrochemistry mechanism

AFM Study of Ultrafine Tungsten Carbide-Cobalt Cemented Carbide

Study of Marine Biocorrosion Using AFM and Molecular Techniques

Self-assembly and AFM Study of Ultra-thin Films of Cellulose Sulfate Salt and Chitosan

Research on optical interference error in cantilever's positioning system of AFM and its reduction methods

Design of a Scanning Control Circuit for an AFM Nanopositioner

Investigation, on the Accelerated Dissolution of Metal Induced by AFM Tip Scratching and Suppressed by Inhibitors

Influence of Corrosion Inhibitor on Accelerated Dissolution of Copper- Nickel Alloy Induced by AFM Tip Scratching

Surface Recognition of the Space Group and Chiral Array on DL-valine Crystalline Structure Observed by AFM

Theoretical computation on the shape changing displacement of AFM microcantilever

Observation of Transcription Regulation in the Mouse Heart Nuclear DNA Fragments and the Specific-protein Interaction by AFM

Applications of STM and AFM in Study of Fracture and Fatigue of Materials

AFM Study of Microstructure of Polymer-clay Floccule

Study on the topography and determine surface pore distribution of cellulose membrane using AFM method

Study of Aggregation Behaviors of Fish Scale Collagen by AFM

Line Edge Roughness and Top-bottom-surface Roughness Measurement of Single-crystal-silicon Step Using AFM

Nanometer-Scale Oxidation Structures Induced by Dynamic Electric Field Effect with AFM on Si Surface

Site-selective Assembly of Gold Nanoparticles on Silicon Using AFM Nano-oxidation Technique

Study on the scanning parameters affecting surface roughness measurements by AFM

Self-Organization of a Double Chain Amphiphile DDPA Investigated by AFM

Amendment of AFM Linewidth Measurement by the Effective Parameters of Tip in Situ

Bundle structure formation on polymer film by varying temperature AFM scanning

Study of Spiral Growth Structure of Nacreous Layer from Pteria Penguin and Blister Pearl by AFM

Reposition imaging technique of AFM with program-controlled sample stage

In situ observation of surface structures of aorta and aorta valve endothelial cells with AFM

Studies on Magnetic Controlled Sputtering Sedimentary ZnO Film AFM

AFM image and hysteresis measurement of ferroelectric arrays

Membrane surface roughness information were obtained by AFM;

Study on Nano- Scale Sample- Plate Fabrication with AFM- Tip Induced Local Oxidation

AFM Observation of Fatigue Surface Images of TiN Thin Films by Physical Vapor Deposition

Investigation on Nano-machining Characteristics of Silicon by AFM

Application of AFM in Microstructure Analysis of Materials at Baosteel

Preparation and AFM characterization of nano-magnesium oxide thin Film

Application Analysis of AFM Optical Lever System in Control of Scratching Depth

Gene Translocation of Mouse Cardiac Muscle and Liver Nuclear DNA by AFM Observation

Carbon Nanotube Tip for AFM and Its Application in the Biology

Anodic Oxidation Nano-Fabrication at Different Parameters by AFM

Experimental research of micro-structure machining basing on AFM

AFM in Liquid and On-Spot Study of Metal Corrosion

Design and Application of a High-resolution AFM

Decomposition Processes of CMTD Crystals in situ Observation by AFM

AFM and transmittance analysis of nonwovens deposited with ZnO film

research on nano - scale linewidth measurement by afm with nanotube tip

Characterization: The AFM images were measured

Investigation on the Properties of Anti-adhesive Films on MEMS Surfaces by AFM

AFM investigation of the DNA patterns formed by water flows

High resolution protein AFM imaging using a carbon nanotube tip

Growth of Single-walled Carbon Nanotubes on the Given Locations for AFM Tips

Design of Target Profilometer Based on AFM and Its Measure Precision Analysis

Influence of Tip on Anodic Oxidation Lithography Based AFM

Kinematics Modeling and Error Analysis of AFM Tube Scanner

Application of wavelet transform in the processing of AFM image

An experimental method of AFM investigation on ribbon's cross-section

AFM Oxidation of Ti Oxide Lines for Nano Photoelectric Devices

An investigation on polished coating surface with AFM

Surface modification of DLC film using conductive AFM

The Research on best imaging Condition of the AFM on Cells

Preparation of Polymeric Nanoparticles and Observation on the Structure of Novel Nanosized Physical Hydrogels by AFM and SEM Methods

Study on the Application of AFM on Kinematics Positioning of GPS

Design and application of an STM-based AFM

Hypothesis of mechanism for cell spreading based on AFM morphological observation

Study on the AFM-Based Detection Storage Medium Surface

Study on the Reproducibility of AFM Anodic Oxidation in Air

A highly effective in situ experimental method in liquid by AFM

The Fractal Structure Studies of Hyaluronic Acid by AFM

Study on the Self-assembling of Collagen type I on Mica Surface with AFM

Relative humidity effect on AFM anodic oxidation of metal film

AFM American Federation of Musicians

Study on Calibrating Magnification of AFM

Damaging effect of trichosanthin on red blood cell studied by AFM

Observation of Silver Halide Micro-Crystals by AFM

Nanomeasurement Technology Based on the AFM and its Applications in the Mechanical Field

Real-time imaging of cytoskeleton in living cells with AFM

The application of AFM in study on microstructure of coal

Study of the Coal Micro-Structure Based on AFM

Study of modified mica by AFM

Mechanism Analysis of AFM Tip Induced Oxidation of Ti in Air

Study on Method of Quantitative Measuring Nano-hardness Based on AFM Indentation Technique

Single Molecule Polymer Force Studies by AFM

Study on a Damaging Phenomenon of AFM Tip on Surface of Collagen Layer

Research of Indentation Hardness Auto Calculating Methods Based on AFM

Influence Factors of Nanomorphology Quality in AFM Mode

Study on pig collagen fine structure using AFM

Design of Device for Microinjection Volumes Measurement Based on AFM

Nanometer Scale Surface Roughness Measurement Based on AFM

Discussion of multimode scanning probe microscope based on AFM

Advance of Nanofabrication Methods and Mechanisms Based on AFM

Application of ARM Processor in the AFM

Fabrication of AFM Probe Tip Based on Self-sharpening Effect

Study on Control of Three-Dimensional Nanoscratching Facility Based on AFM

A Study on the Effect of Moisture on Surface Attractive Force Using the AFM

High quality tip of AFM made by SEM

A High-speed AFM Scanning Mode Based on Learning Control

Edge Detection of AFM Images Based on EED