load test

One of the tools provided to help you analyze the results of your load tests is the graph pane in the Load Test Monitor and Analyzer.

The load test summary provides the key results in a compact and easy to read format.

During a load test, a meaningful user that loads breakdown to multiple test clients is often desirable.

The Load Test Editor allows you to modify an existing scenario, or to add new scenarios to the load test.

You only have to run the scripts one time for your local Load Test Results Store to be the global setting for all load tests.

doing so may place an unreasonable and unrealistic demand on your server or servers at the beginning of the load test.

It allows you to record the steps that you want to run load test on, and then replay the steps with the appropriate user loads.

You might be able to correct this error by increasing the sample rate for the load test.

An implementation of a load test plug-in can be used to extend or modify the behavior of a load test as it runs.

Usually, a load test is recommended prior to a production go-live test, which exercises the product for a specific set of use cases.

Once you move into a load test environment, you will need views of your application beyond what traditional profilers provide.

The networks included in a scenario should reflect the objectives of that scenario for the load test.

However, any of the settings that you enter in the Load Test Wizard can be modified in the Load Test Editor after the wizard is finished.

The Citrix Presentation Server extension enables you to load-test Windows applications running on Citrix Metaframe Presentation Servers.

A large number of performance counter samples can be collected over the course of a load test run.

Anticipate these types of problems and invest in a good load test environment, as close to the production environment as possible.

To the load test context parameters and set the value to the name of your production server production server.

Also, the load test client must be capable of generating the appropriate type of request needed for loading the application in question.

Click Yes at the end of the load test run when the dialog box that asking you to view results from the Load Test Results Store appears.

Waste - Determination of the permeability coefficient of piece of land by variable load test in an open cased well.

The total number of this Web test request issued during the load test run.

A Visual Studio window that displays results of any load test run, after it has run.

Use this test mix model when you want virtual users to run test at a certain pace throughout the load test.

You can also configure the log file to be automatically saved when your load test fails to help in debugging and analyzing your application.

The title of the window is the name of your load test and the time the test was started.

The initial settings that you configure for a load test using the New Load Test Wizard can be edited later using the Load Test Editor.

When you view load test data, you can view the data as a graph, to see how it changes over time.

Run the load test with network emulation configured correctly, even though you might be seeing socket exceptions.

The name of the Run Setting as it appears in the Run Settings node of the Load Test Editor.

Specifies the total number of individual tests to run before the load test is complete.

In the drop-down list on the Test Results window toolbar, select the load test run whose results you want to see.

Test Edition includes a new Repository Management dialog box that enables you to access directly the load test results repository.

The rate per second of this request during the load test run, for the instances of this request that failed.

Only one of the run settings may be active for a load test run.

A browser mix specifies the probability of a virtual user running a particular browser type in a load test scenario.

The maximum number of unique Web test request URLs on which to report results in this load test.

The total number of transactions issued during the load test run.

The test mix specifies the probability of a virtual user running a given test in a load test scenario .

A load test generator takes think time into account as it runs virtual users (more on this later) through its script.

This allows for 90th and 95th percentile data to be shown in the Load Test Analyzer in the Tests, Transactions, and Pages tables.

You can also view response time data in a graph to see how it changes over time during your load test.

Calibration certificate for all measuring instruments and valid load test certificate for all lifting tools &equipment must be produced.

The counters pane displays the performance counters that have been collected during the load test.

Counter sets can be selected for the computers that you specify for inclusion in the load test scenario.

When a load test runs, a smaller set of the performance counter data is maintained in memory.

Add counter sets to your load test: When you create a load test with the New Load Test Wizard, you add an initial set of counters.

Provide programmatic control over the user load used as the load test runs; overriding the user load specified in the load test editor.

This can be implemented by a user-written class to plug user-written code into the load test run time engine on the agent.

The test mix specifies the probability of a virtual user running a specific test in a load test scenario.

Counter sets are a set of system performance counters that are useful to monitor during a load test.

After the load test finishes running, you can view the Load Test Summary to understand the results quickly.

No abnormal noise and vibration during no load test. Lubrication and seal is in a good condition. No loosen bolts.

You create scenarios as you step through the Load Test Wizard.

A set of predefined counter sets that add specific performance monitors to your load test are displayed.

A constant load pattern is used to run the same user load during the run of a load test.

Once you get a load test running with an automated build, schedule it to run on a periodic basis, such as nightly.

Scrolling graph mode is available when you are viewing the result of a load test while it is running.

In load test, multiple users access the program concurrently to simulate the expected usage of a software program.

After a load test has completed , use the zoom bar under the graphs to zoom in and scroll to a region of the graph .

Each of these settings corresponds to a page in the New Load Test Wizard.

Load test settings can be accessed through the UI or with a load test plug-in.

Each of these settings corresponds to a page in the Load Test Wizard.

For any setup that does not use a remote machine, the database is created on the first run of a load test.

The decoupling control can improve the control performance of the load test bench and provide the theoretical basis for the further study.

If you run your Web test under stress in a load test, you will be able to analyze the following information for each page.

When using Web tests in a load test, transaction response times are displayed in the transaction table of the Load Test Monitor.

Describes the result of running an individual test case within a load test.

In other words, counter sets apply to an entire load test and should reflect the goals of your entire load test.

But there exists some error in bearing capacity determined according table and theoretical analysis, and the load test is of large cost.

Click the center section of the zoom bar and then drag it to scroll to a particular point in the load test.

When you view the results of a load test run, you can display different panes that provide you with different ways to analyze the data.

threshold violations hyperlink appears on the Load Test Analyzer's status bar and specifies the number of violations that occurred.

The Add Scenario Wizard is a subset of the New Load Test Wizard you used to create your load test.

The test results should show some correlation between the numbers seen on the load test client side and those on the application server.

A load pattern specifies the number of virtual users active during a load test, and the rate at which new users are added.

You can increase this number if you have to, but doing this will also increase the size and processing time of the load test result.

The sample values that are captured before the warm-up period ends are shown in the Load Test Monitor.

This specifies the maximum number of connections to make between the load test agent and the Web server.

While a load test is running, a smaller set of the performance counter data is maintained in memory.

This walkthrough requires an existing a Web test or several Web tests that you can add to a load test.

Differences exist in what data is displayed when a load test runs and what data that you can see after a load test has completed.

Describes the steps to set up a load test to run on remote computers.

You choose the load pattern and adjust the properties to appropriate levels for your load test goals.

In a typical scenario, to load test a Web application, you identify the various scenarios by well-defined test plans.

While a load test is running, up to 200 samples for each performance counter are maintained.

You can keep these default values or change them to values more appropriate for the purposes of your load test.

Analyzing the results of your load test: After you access the load test run data, you can analyze the resulting data.

The network mix provides you with a way to simulate load more realistically in a load test scenario.

Contains information to set up a load test results repository on a SQL database.

It has to be strong enough to withstand a load test of 1000 newtons.

On the Scenario page of the Load Test Wizard, enter a name for your initial scenario.

Waste - Determination of the permeabiblity coefficient of field by a varying load test in a covered boring.

Unless you have an extensive load test environment with representative data and error insertion, it is possible for such problems to occur.

After you add a set of tests to a load test, the test mix works like other mix options.

Using think times in a load test can be useful in creating more accurate load simulations.

Additionally, you can use the Virtual User Activity Chart to help isolate performance issues in your load test.

Abort the load test if the value of a performance counter causes the failure of a threshold rule defined in the load test.

You can view the Load Test Summary to understand the results quickly.

If any errors occurred, an errors hyperlink appears on the load test status bar and specifies the number of errors that occurred.

The Goal Based simulation option is only available from the Load Test Editor after the load test has been created.

Counter sets, like run settings, apply to all the scenarios in a load test instead of individual scenarios.

Specifies the number of virtual users active during a load test and the rate at which new users are started.

The pass and fail status information for that load test run is displayed in the list.

You can view threshold violations in the Counters pane, in the tree that lists the performance counters for your load test.

All measuring records and load test reports need to be handed over to chief officer in three copies.

finish the dynamic load test and compare the precision of the FBG Weight-in-Motion system with another existing Weight-in-Motion system.

This data is automatically saved in the Load Test Results Store at the end of the test run and the trace file is then deleted.

The number of errors of this type that occurred during the load test.

Currently the only reliable SOH examine method is complete load test, which is off-line, time-consuming and laborious.

We conducted each load test twice to determine whether the same results would occur.

Please debug the external problem first before you try to run the load test again.

Run that with a high load setting and ensure that your server stays up until the load test finishes.

The Load Test Editor lets you modify the properties of an existing scenario or add new scenarios to the load test.

This section also contains the optional description of the run that you add when you run the load test.

This test verifies that, when the load test is running and the network driver is enabled, external or lab connectivity is not a problem.

To load the full set of data later, click the View detailed results hyperlink on the load test status bar.

All the counter sets that have been added to the load test are visible.

At the end of the load test, the number of times that a particular test was run matches the assigned test distribution.

Load test for shaft generator and its function test on sea trial. Interlocking reliability test.

The load pattern properties specify how the simulated user load is adjusted during a load test.

Two separate load test tools were used during the testing of the Remote Management Agent server.

Contains the computed value of a performance counter collected during a load test run.

Right-click the active Run Settings node for your load test and then click Properties.

A scenario is the container within a load test where you specify load pattern, test mix, browser mix, and network mix.

You can set the Maximum Error Details property of a load test run setting to change the number of errors for which details are collected.

An Overview pane which displays the configuration, requests and test cases information for the running load test.

Locomotive load test is a very important link of railway department repairing locomotive.

Specifying the computers and counter sets for the load test is covered in step 3 in the next section.

Test results from your agents or your local computer can be saved to any SQL server on which you have created a load test results store.

After you choose the Scenario page settings, click Next to continue to the Load Pattern page of the Load Test Wizard.

The virtual user continues cycling through the tests in this order until the load test is complete.

The average response time for a Web test transaction in a load test run.

In the Test List Editor window, select the load test to run, right-click, and choose Run Checked Test.

Both the Web Test Editor and the Load Test Editor allow you to add rules to tests.

An association between a counter set and a computer used during a load test.

On the Test Manager window, select the load test to run, right-click and then select Run Checked Test.

The Load Test Results Repository contains performance counter data and any information about recorded errors.

Load test data contains performance counter samples collected periodically from the computers-under-test.

Moreover, the theoretical analysis of gas force was confirmed by the different compressor load test.

You can add more scenarios, or change any of the scenario settings in the Load Test Editor.

Specifies the number of virtual users who are active during a load test and the rate at which new users are added.

think profile is a setting that applies to a scenario in a load test.

While a load test can contain both Web tests and unit tests, this walkthrough focuses on a load test that contains a Web tests.

The counter sets that are already added to the test are visible in the Counter Sets node of the load test.

When you add unit tests to a load test, you exercise the performance of non-Web based server components.

Any values you enter in the Load Test Wizard can be modified in the Load Test Editor after the wizard is finished.

Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets.

Think times occur between requests in a Web test and between test iterations in a load test scenario.

For a large load test, the amount of data collected can easily be several gigabytes.

First of all, the foundation of the buildings is detected to giving a pile press, and this test is Static load test.

Run settings are a set of properties that influence the way a load test runs.

After you choose the counter sets, click Next to continue to the Run Settings page of the Load Test Wizard.

When you create a load test with the Load Test Wizard, you add an initial set of counters.

The Load Test Results Repository contains performance counter data and information about any errors.

You can also view the graphs of any load test run that you have previously saved through export.

The Load Test Results Store contains performance counter data and any information about recorded errors.

Counters not provided in the default set of counter can be added by using the Load Test Editor.

In addition, its built-in data correlation filters detect variable data, as well as preparing tests for data-driven load test generation.

At any point in the load test, the number of users who are running a particular test matches the assigned distribution.

Counters panel, in the tree that lists the performance counters for your load test.

The closer the two handles are to each another, the more you zoom in to display shorter, finer segments of the load test.

The rate per second of the request during the load test run.

Its effect is obvious. The paper introduces design calculation, construction process and load test.

You can perform the following procedure either while a load test is running or after it has finished running.

Analyzing errors and adjusting your tests are an important part of the load test process.

To change the default Load Test Results Store for the results of your tests, you can change the Load Test Results Connection String.

Based on the result of load test, the data of test in silty clay foundation contained gravel is analyzed.

In Figure 3 we have three load test clients that are applying load against the servers in the performance test environment.

With a load test open in the Load Test Editor, click the Run button on the toolbar.

Add a Load test to the Test Project and configure it to run a Web test.

The static load test determining to measure the bearing capacity and deformation index is the most direct and effective way.

You can continue the cycle of editing that load test and running it until the load test performs correctly.

This method provides the entry point for the load test engine to execute the code contained in the load test plug-in.

Ensure that the Web server has enough listeners defined in order to avoid "failed to connect" errors from the load test clients.

This zooms out to show the entire duration of the load test run.

This controls the usage of connections from the load test agent to the Web server for Web tests running inside a load test.

The improved version of the Remote Management Agent load test tool is described in this section.

When you run a load test, information gathered during the run is stored in the Load Test Results Repository.

By having several scenarios in a load test, you can run different testing models in the load test.

To profile the Web site in your load test, you have to install a test agent on the machine on which the IIS is running.

The defect investigation and nondestructive test and load test has been done to the rigid frame arch bridge which has lost its data.

Displays a list of threshold rule violations that occurred during the load test run.

The rate per second of the test during the load test run.

The Load Test results store must be explicitly installed.

This table is available only after a load test has completed, and only if SQL tracing was used during the test.

You can create and store multiple run settings for each load test, and then select one particular setting to use when you run the test.

From that test agent machine where you are running the load test, attempt a connection to any host outside, such as your favorite Web page.

Load test invokes validation rules with a Low setting.

Load test program to be followed as written in to the program.

By comparison with the dead-load test, the reliability of the new method was verified.

To display the dialog box, click a hyperlink in the Stack column of the Load Test Errors dialog table.

The single user load test is typically for establishing application base line performance.

Swing-based desktop application designed to load-test and measure system performance.

You can click any hyperlink to view a list of the individual errors in the Load Test Errors dialog box.

After a load test has completed, you can analyze the full set of data from the database.

If SQL tracing is enabled, a file is created during the load test run that contains the trace data.

The Load Test Errors dialog box displays a table of the individual errors that occurred.

That way, any important system data is collected and monitored during the load test.

Alerts that can be set on a particular counter to notify you of system resource usage during a load test run.

When you create a load test, you add counter sets that you want to monitor in the Load Test Wizard.

Then, any important system data is collected and monitored during the load test.

The run settings should reflect the goals of your load test.

In the second section of this article (Part 3), there will be steps to add more user groups as the user load test increases.

The curve panel was corrected by static load test and the performance of seat suspension was evaluated by dynamic test.

To display the dialog box, click a hyperlink in the Details column of the Load Test Errors table.

You can analyze your load test data to locate bottlenecks, identify errors, and measure improvements in your application.

The average response time for Web pages that are accessed during the load test.

It is a good practice to run a smoke test before running any intensive load test.

The following tables describe the various properties for load test scenario settings.

You can analyze your load test to locate bottlenecks, identify errors, and measure improvements in your application.

A load test models the expected usage of a software program by simulating multiple users who access the program at the same time.

On the Load Pattern page of the Load Test Wizard, select either Constant Load or Step Load.

You design a custom graph by specifying the load test counters that the graph will display.

A load test also exposes many run-time properties that can be modified to generate the desired load simulation.

The load test summary shows the key results in a compact and easily read format.

Walkthrough: Using a Test Controller and Test Agents in a Load Test.

You can use the Load Test Analyzer to locate bottlenecks, identify errors, and measure improvements in your application.

After you create a Load test, you can add new custom counter sets to it.

In the Load Test Editor, the active run setting is identified by the "[Active]" suffix.

You can view load test results as they are being generated, and you can view results from completed load test runs.

After the simple load test, the object will be tested to ensure it was instantiated properly.

A capacity and loss measuring instrument for no-load and load test of power transformer is developed.

The test results indicate an extensive application prospect for super-long pile load test.

The average response time for transactions that occur during the load test.

Maintain a shared variable across all test iterations in a load test.

In this walkthrough, you use the load test wizard to add a Web test to a load test.

HeartBeatEventArgs indicates the elapsed time into the load test warm-up period or measurement period.

Specifying Virtual Network Types in a Load Test Scenario.

With all the tables defined in the test database, you can now load test data.

It is easy to be distracted during a recording session and have unexpectedly long think times that have an adverse effect on a load test.

Improved load test results repository management.

After you are done editing your load test, you can run it to verify that it is functioning correctly.

To view a table of the individual errors, you display the Load Test Errors dialog box.

Skylight and conservatory roller shutters - Resistance to show load - Test method.

Gravel pile; Composite foundation; Static load test; Pile-soil stress ratio.

Additional notes: Any additional notes regarding the specific load test run.

When you create a load test using the Load Test Wizard, a scenario is added for you in the load test.

The Think Profile applies to an entire scenario in a load test.

Additional run settings can be created and modified later using the Load Test Editor.

Individual tests within a load test might still be running when the load test finishes.

The Virtual User Activity Chart lets you visualize the virtual user activity that is associated with your load test.

The comments are stored permanently, together with the load test result.

The browser mix gives you a way to simulate load more realistically in a load test scenario.

To do this, the load test plug-in implements a variable as a static property that is accessed by the tests under load.

Load tests and load test results contain computer names and connection strings.

You can monitor this set of data while your load test is running.

Using the Load Test Editor and the Properties window, you can specify a delay before a scenario starts in a load test.

You can design graphs that display specific information about load test results.

A button on the load test toolbar is available to stop the load test.

The Load Test Results Store can also be queried using any standard SQL query tools.