low-speed

Current hysteresis compensation being used in low speed. Single chopper modulation compensation has been used in high-speed.

But that's not the whole of it, because this new-found communication isn't just a low-speed phenomenon.

"Martin Gull! " he shouted across the sky. "You say you know low-speed flying. You know nothing till you prove it! FLY! "

Today the ministry confirmed that another sub was involved, saying: "They briefly came into contact at a very low speed while submerged. "

The simulation results shows that this control strategy can solve the problems of low speed stiffness and poor control performance . . .

A few days ago, the submarines came into contact at very low speed.

"The two submarines came into contact at very low speed, " Band said in a statement. "Both submarines remained safe. "

Testing results of the servo system developed show that the system is of high accuracy and excellent super low speed stability.

is placed in the front of the ship under the water, which eases berthing or maneuvering sideways at low speed.

Since the cold and continuous low-speed motor running, will be affected due to lack of wind cooling, electrical safety threat to run.

The propeller Due to the low speed of the steam engine drive propeller, so he thought thrusters or round good oar.

Grease lubrication is generally used to low-speed, normally in the parts of lubrication, and requirements which a well-ventilated (heat).

The new SOQI rear shock both high and low speed compression damping plus an easy-to-use screw adjustment for preload.

The simulation results showed that this system could give good torque, speed and good resistance at very low speed.

Such a low-speed impact does not melt or vaporise rock like a high-speed crash.

Luckily the train had been running at low speed following several hold-ups between stations.

They briefly came into contact at a very low speed while submerged.

It solved problems of low speed of traditional reliability algorithm, inaccuracy and with heavy, complicated procedure.

looking for is the only allowed, with hand move or open for the most low speed chuck is, not open for high speed is.

Numerical simulation was applied to the unsteady flow at the mid span of a two-stage low-speed compressor.

The utility model relates to an oblique pull type low speed windmill which belongs to the improvement of a windmill structure.

Although strain gage balances have been most useful in transonic and supersonic tunnels, they are by no means excluded from low speed work.

The utility model provides a small size oblique pull type low speed windmill which comprises an upright post provided with a generator.

Anti-roll tank system is the only choice to reduce rolling for ship at anchor or at low speed, but its effect is not very good.

With a low speed system fan, the system has stable performance with minimal noise.

Then the whole radar front-end is integrated and tested, the result shows that the radar can be used to detect low speed moving target.

It is try to measure the distortion through the heated jet with low speed by the two dimensions Lateral Shear Interferometer (LSI).

Maintain the speed with China automobile development idea is adapted to the goal is not a conservative, pessimistic low speed.

The main equipment here should be: pipette, refrigerator, balance, low speed centrifuge, vortex mixer, mobile UV lamp, etc.

Don't count on the bumper to hold up during a low-speed collision. And that fender-bender could be costly.

Needless to say, all these means of transportation are in very low speed.

Spheroidal austenite and acicular austenite can be seen during the austenitizing courses at low speed.

Applied to large scale high temperature, heavy-duty conveyor chains, low-speed heavy-duty friction parts in metallurgical industry etc.

Most synchronous motors used in industry are very large horsepower and relatively low speed.

when it is no-load or overload, Do not run motor in low speed for long time to avoid high temperature rise.

The system can operate the vehicle entirely on battery-electric power during idle or low-speed driving situations.

In other conditions permit, the general promotion of large low-speed pitch.

A low-speed input device that converts graphic and pictorial data into binary, numeric inputs for a digital computer.

however, in low-speed business card printing and membership card making machine is still in the majority.

As part of the research, Phantom Works has built a scale model for wind-tunnel testing of the concept "s low-speed flying characteristics. "

The installation of Low Speed Driver assistance systems has just began in Europe and the market will witness entry of new suppliers.

Can be used for low speed production line charge less static.

Low speed electrical machine is one of the most important developmental directions in electrical machine regions.

The dynamics of underwater vehicles can be greatly influenced by thruster dynamics, especially at low speed.

When a region of farmers per capita net income of more than million years started to enter the purchase of low-speed car heights.

Plate count method, method dilution method, low speed centrifugalization and dilution medium were taken the verification of methodology.

Silent running Operating with minimal noise to avoid detection on enemy hydrophones. Using a low speed , no unnecessary activity, etc.

Add melted chocolate; mix well. Add eggs, 1 at a time, mixing on low speed after each addition just until blended.

If it is safe, drive the car at low speed, braking as needed. The brake pads need replacing, or cleaning, if they squeal.

It can be known that the cross wall can improve the total cooling performance of tower under low speed crosswind .

Is a global group. Global groups cannot be created or edited in Low Speed Connection mode.

Start-up and low speed operation All load commutated inverter drive suffers from a drawback of limited low speed operation.

Except a small number of highly viscous and low speed fluid flow, the flow problem is almost turbulent flow in oil industry.

Figures A and B show that the polarity of the D and D- signals during the packet transmission is opposite between high and low speed links.

Transverse flux permanent propulsive magnetic (TFPPM) motor has low speed, high torque density and is widely researched as propulsive motor.

best combination of low speed scraper and medium speed rotor , large mulling sand , even - mulling ability , good integrated performance.

A real-time fan shaft section temperature monitoring system based on a bus framework in the low-speed pressurized wind tunnel is introduced.

Some automobile technical problems which involves in the low speed collision process urgently need to be solved.

Finally, the controller for friction compensation and improving the low-speed performance is completed and developed to control program.

Stable: Only one low speed running for gearless traction machine, it will ensure the long time stable running.

The crest factor ratio can be used in the medium and low speed regions to detect a localized defect on the outer ring.

It also connects a variety of low-speed devices (keyboards, mice, game peripherals, virtual reality peripherals) to the PC.

As traction power of low-speed maglev train, parameter calculation of linear induction motor was very important for train control.

Brushless motor structure and a similar low-speed motor structure.

Combine all the ingredients in large bowl of electric mixer, beat at low speed until the mixture combined.

for low-speed switch on the machine, check for abnormal sound, re-opened after you turn off the power.

Place all ingredients in a mixing bowl, and beat on low speed until just combined. Increase speed and beat until smooth.

Then it's known that the low speed direct-driven permanent magnetism generation of wind power system is superiority straight.

At least for the hover, and the low-speed flight.

Loading and unloading machines, engines to low-speed operation, low-speed machines to run.

Experimental research was carried on a three-stage low-speed axial compressor with different inlet distortion.

Amp structure open-loop comparator has high resolution, but low speed, traditional latch comparator has high speed, but low resolution.

Provides services for short trips where the low speed is unimportant and the low fare is a major advantage. May feed heavy rail .

Low speed instauration is characteristic of Anhui population development during the period of the Republic China.

All automatic switching in devices of service power sources used in the domestic power plants in the past were of low speed switching-over.

The torque ripple will degrade the performance of control system by classical direct torque control for asynchronous motor in low speed.

Up to 25 flights are planned to gather data in these low-speed flight regimes.

No Noise: The low speed motor reduced the mechanical vibration, totally solved the noise problem between gear and motor high speed running.

It should be combined with low speed drilling to prevent the risk of bone demineralization and possible loosening of the bone screw.

When the motor is already started , we let the power takeoff engage , and let the motor run with low speed to fully pre-heat .

Some low speed pendulum impact tests were conducted on a typical energy absorption bumper with own developed bench.

For high or low speed rotation. Superior rigidity and good centricity of inner and outer diameter. Sealed mediums-mineral oil, water, etc.

Sound natural frequency of wind tunnel tube plays a key role in researching the buffeting phenomenon of low speed automotive wind tunnel.

Wall shear stress method integrates the plug flow displacing, the low speed displacing and the turbulent flow displacing methods in theory.

Collect herrings in an ice channel with various paths and many high and low speed passages.

Friday started out pretty well. The car was well-balanced, but it was understeering in the low speed corners.

Drive shafts from top to bottom are operated by low-speed shafts of cylinder gear reducer, therefore cut from top to bottom is synchronized.

Low speed and price and the labor of devices, and the combination of progress has increased by a larger product added value.

While at the times of middle and low speed the life-span and reliability of steel bearings are better than those of ceramic bearings.

The paper introduces the launch modes and characteristics of the high speed and low speed near space aerocraft.

Low-speed system performance is improved by hydraulic speed controlling, then it realizes the variable speed in large range.

The method is proved to be ta useful tool in treating the low speed rarefied gas flows.

With prolonged fuel supply time, the high pressure injection was realized at low speed.

Applicable to lubrication subjected to high temperatures and harsh working conditions of low speed bearing.

Firstly, this paper studies every component of the servo system to improve the performance at low speed.

The torque ripple arosed by the slot effect in PM motor are more significant in the low speed hub motor for electric vehicle use.

Also, the heat loss from the compressed air to the cylinder walls will be greater at low speed Because of the longer exposure.

In low-speed urban environments, he argues, lighter engineering can be used without compromising safety.

This new hydraulic cylinder may also provide reference for other single-acting cylinders with low speed.

Simulation and experimental results testify this scheme can effectively reduce the torque tipple in low speed.

So, how to control breath? I found myself out of breath when playing in a low speed.

A three-joint robot was directly driven by ultrasonic motors with advantage of high torque at low speed.

In low speed, stator resistance directly affects the performance of stator flux oriented control system.

For medium or low speed roughing large chip sections for steel cast iron and alloy steel under unfavourable conditions.

Low-speed driving in the method of operation of parking brake is to brake pedal, and then the clutch pedal, making the car a smooth stop.

The development of a compatible low-speed and high-speed technology, so as to provide a vast number of users can be shared.

Geostationary Earth Orbit(GEO)MSS are for voice and low-speed data mobile personal communications services.

Friction caused low speed creep and tracking errors which presents in servo systems has become an impediment to improve their performance .

When need low-speed and high torque, the induction motor and gearbox are usually combined.

The machine processing features, it is mostly in cutting speed, that in low speed to drive into the torque output to someone.

I enjoy the layout of the circuit. It has a good mix of corners, high and low speed, and it flows well.

Typically, the hybrid car uses the electric motor for low-speed cruising while the petrol-powered motor is used for longer, faster journeys.

An optional, X2 speed output provides twice the number of pulses per revolution for improved low speed operation.

All diesel and gas-burning engines may be divided into three classes according to speed; low-speed, medium-speed, and high-speed engines.

The processor fan operates at a low speed while internal chassis temperatures are low.

Simulation proved that the sensorless detecting method can detect rotating speed of rotor exactly in both high speed and low speed.

This paper introduces a low speed PM synchronous motor with approximate number of poles and slots which is designed for actual use.

You'll accept the low speed as a cost of development.

with famous manufacturers with low-speed universal motor Y series of standards, run smooth, low noise.

two-stroke diesel engine and four-stroke diesel engine. High-speed, medium speed, low speed diesel engine.

The utility model has the advantages of large low speed transmission ratio, simple structure, and good versatility.

When vehicles return to low-speed operation, the power assisting flywheel stops working.

Improved the torque ripple and current distortion and non-ideal of low speed about direct torque control.

Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.

one down stream control unit connected to high speed bus and test control unit to send outer signals to low speed bus.

Flow of uniform pressure stability, low speed when the more apparent.

Summarized the phase chart and the material flow state in low-speed dense-phase pneumatic conveying process.

The information is transmitted in both high and low speed links is the same as in both figures A and B.

Bipolar drive availed to control the Brushless DC Motor (BLDCM), and enhanced the stability of the motor at low speed.

Current feedback is required for low speed operation and PWM is now finding favour because of acoustic noise issues.

To reduce par asitic power consumption, some systems use the low speed of a two-speed fan.

accurate measurement: apply high precision and low speed measuring pump.

Suitable for various models clean lubrication maintenance of high or low speed hand-piece.

The dynamics problems for the yawing mechanism of the CMS-03 mid-low speed maglev train are were studied.

The second part introduced design of electric control and measuring speed system about low speed control system.

The analysis solution of outer trajectory about low speed and flat trajectory is deduced out.

But it is restricted that modem has a low speed and a high error bit rate.

They are highly effective in mitigating liner cavitation corrosion in both high-speed and low-speed engines.

Also, a modified form of CMOS gate that can be programmed to work in a low-speed or a high-speed mode is presented.

Low speed, it is difficult to break into shaping of granule and slice raw material.

All transition line angles are finally rounded with flexible disks at low speed.

With a new car, there'd be all kinds of bugs that would reveal themselves at low speed under normal driving conditions.

Switch to the paddle attachment. With mixer on low speed, add the flour mixture.

The preliminary dynamic performance simulation on low speed and heavy load condition and high speed condition of HEV is carried out.

The belt driven pump runs at low speed for an extended life.

It is tricky because of the mix of a long straight, some high speed corners and then some difficult low speed winding corners.

The first one analyzed composing and working principal about low speed control system of principal axis.

Firstly, the advantages of low speed high torque motor ere introduced.

Mike: You'd better start with a low speed. Drink water every 15 minutes.

The crawl of CNC machine tool at low speed feeding is very harmful to the machining accuracy and surface quality.

The mechanism of speed regulation can decrease leveling time in high speed gear, and ensure accuracy in low speed gear.

In a blender, mix all ingredients together on a low speed for 30 seconds.

Don't count on the bumper to hold up during a low-speed collision.

Low-speed bearings use grease and high-speed bearings require light oil.

Don't run long time or run in low speed and overload or in locked-rotor conditions to avoid too high temperature rise.

Therefore, in order to improve the system low speed performance, it is necessary to compensate the friction force.

It is a low speed serial bus protacal, Lin sub-bus is primarily intended for modules like window, door, switch panel and light etc.

The SL -II's low speed handling was also a welcome surprise.

Sensorless vector control with autotuning provides 200 percent starting torque and advanced low-speed torque control.

The low speed bottom sweep provides proper heat transfer to tank walls.

The experimental model and equipment are designed, and the low speed wind tunnel experiment at high angles of attack is made.

After all, a high-speed train isn't any faster than a low-speed train when it's standing still.

Maintain the bombing data carefully. No high (low) speed.

This air improves the atomization of fuel coming from the low-speed port.

A special 40 BN cylinder lubricant for use in all low speed diesel engines operating on residual fuel with sulphur content lower than 2% wt.

The drawing stress increased with the speed rise at low speed.

Driver must abide parking rules as parking lot is public area. low Speed is necessary while driving in to ensure safety.

System analysis on chatter of bogie and brake system of vehicles under the condition of low speed brake was conducted.

Finally, the trends of low speed high torque motors were given.

A sensorless vector control method for permanent magnet synchronous motor(PMSM) drive at very low speed was presented.

high speed glue adhesive curing speed slightly faster than the low-speed.

Car and SUV bumpers underride and override each other in low-speed collisions, contributing to costly damage.

Oil lubricants for diesel motors of median and low speed.

Turnout zone is an unsubstantial part in the rail, being a terrible condition for the vehicles with low speed and unsafe running.

Development of various sizes and low-speed wind tunnel test equipment.

Futhermore, we give the signal preprocessing method of high-speed user and low-speed user.

Add drained Chinese wolfberries. Knead for another 3 minutes at low speed.

Basic knowledge of medium to low speed diesel engines will be an advantage.

You can adjust the high and low speed motor according to individual needs, convenient and quick.

But low speed dawdling is not at all what this bike is about, is it?

The low speed of solid powder boronisation is the main factor hindering the development of this technique.

Beat in eggs, one at time, on low speed until just blended.

In part because of their smaller size and lower weight, economy cars often don't fare well in low-speed crashes.

Low-speed devices operate at the same time checking the various instruments are normal.

The card is simple in structure and it can be used in the control system with low speed but requiring high reliability.

4 . Control surface flaps in prop wash for low speed control and added lift.

In response to the low-speed, 3-micron resolution of detection.

In order to solve the problem of the low speed in Point-to-Point motion control, interpolation method was adopted.

" or " is the 4. 3L V8 naturally aspirated engine comes from Ferrari can real improve the low-speed torque and high-speed driving force?

Add drained raisins . Knead for another 3 minutes at low speed.

Speed ratio is 1: 5000, from low speed to high speed, all have steady torque characteristics.

Therefore, all face detection algorithm usually have some problems, like too much calculation, low speed, poor robustness and so on.

Excellent antifriction capability, can make the machine in low speed vibration or discontinuous sliding reduced to the minimum.

Low speed mean, no draught is caused.

when the paper, high speed and low speed not paper.

All devices are tested according to the latest spec, so recently-compliant Low-Speed devices are also 2. 0 devices.

Is based on market demand derived from a low speed, gear-type pumps.

This Paper introduces the development process of Tiaterials for domestic marine low -speed diesel pump.

Not only does it has large lifting capacity, moment and height, but also good perching ability at low speed.

Adhesive nail machine approximately150 now have a high-speed, low-speed medium speed, .

Another advantage of transportation -5 is that it can be stable at very low speed flight, and only for take-off distance of 170 meters.

Traditional steering system can not meet the flexibility at low speed and stability at high speed.

At last low speed ball mill which is used widely in power plants is simply introduced.

You go from very high speed to some low speed, quite technical corners.

Are you angry at the staff's low speed of dining selling?

Press S3 button can make the motor at low speed, high-speed, stop the three state conversion.

Press S3 button can make the motor at low speed, stop 2 mode conversion.

Analysis of the Technological Factors that Affecting the Surface Quality and Causing Wire Break in Low-speed Wire Cutting Process

A Stability Approach of the Whole Aircraft Low Speed Flutter Model Suspended in the Wind Tunnel Analysis

The Design Method of Slipper Pair of a High Pressure Camshaft Connecting-Rod Low Speed High Torque Hydraulic Motor

Rotating stall experimental study of a low-speed centrifugal compressor

Which do you like better, a high-speed train or a low-speed train? Why?

Design of a permanent magnet DC motor for low speed large torque and computation of its parameters

Study on Novel Sector-stator Motor with Low Speed and Big Torque Used for Directly Driving

Experimental Study of Pre-Stall Pressure Disturbances in a Low-Speed Axial Compressor

Experimental Investigation of the Flow Field in Approaching Surge for a Low-Speed Two-Stage Compressor

The Aero-Elastic Characteristic of the Low Speed Spinning Ballistic Missile and its Stability Design

The algorithm of the motor parameter off-line identification and the low-speed performance of the system;

The Direction of Low - speed- heavy - duty Gear and Its Type and Structure Design

Analysis of Factors That Have Influence on Low Speed Performance When Turbocharger with Waste-Gate Matching with Diesel Engine

Numerical analysis for the unsteady flow and casing treatment in a low speed centrifugal compressor

Simulation Study of Effect of Seat Design Parameters on Occupant Neck Injury Potential in Low-Speed Rear Impact

Design of a Novel Double stator Permanent Magnet Synchronous Wind Generator with Low Speed

Simulation Research in Nonlinear Compensation at Low Speed for an Electromechanic System

Series-Double-Crank Mechanism with Low-Speed and Quick-Return Motion and Its Genetic Algorithm Optimization

Study of Low Speed Performance of Asynchronous Motor Direct Torque Fuzzy Control System

Numerical Investigation of the Effects of Bowed Compressor Stator Vanes on Variable Incidence Performance at Low Speed

Simulation Study on the Frontal Collision Performance for the Bumper System of a Saloon Car at Low Speed

Study on low speed primary jet vector controlled by synthetic jet actuator with an inclination angle

Study of Vector-Controlled Permanent Magnet Synchronous Motor at Low Speed and Light Load

as installation and maintenance requirements, has made a large kiln cylinder rotation at low speed auxiliary transmission ;

Design Methodology of Wire-Driven Parallel Support Systems in the Low Speed Wind Tunnels and Attitude Control Scheme of the Scale Model

Dynamics modeling of low-speed maglev vehicle system and simulation of its guidance mechanisms

Air-admission mechanism and low speed tunnel test of a submerged inlet with low RCS missile body

Low-speed friction and performance of new continuously rotating electro-hydraulic servomotor

Friction Dynamic Compensation for a Simulator with Ultra-low Speed and High Precision

Prediction of the Compressive Strength for Composite Honeycomb Core Sandwich Panels after Low Speed Impact

Effects of Tip Clearance Grids on the Simulations of Three-Dimensional Flow Fields in a Low Speed Compressor Rotor

Extrapolating component maps into the low speed and simulation of windmilling performance of turbofan engine

Experimental Study on Effect of Inclined Swirl on Combustion Process of a Gasoline Engine at Low Speed and Load

Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure

Analysis of Negotiation through Vertical Curves by Magnetic Levitation Vehicles with Common Conductor and Medium or Low Speed

Simulation of Hydraulic Motor Low Speed Performances Considering Nonlinear Friction Torque

The Application of Minor-diameter Low-speed Detonator in Smooth Demolition of the Tunnel Blast-excavating

Dimensionless parameters applied to fault diagnosis of mine low speed heavy loaded gear

Permanent magnet low speed direct current tachogenerator, General specification for

Investigation on Wing Rock in a Low Speed Wind Tunnel for Fighter with Different Configurations

Application of non- contact electric control equipment of low speed regulating alternating current cranes

Experimental research of ultra- low speed performance of the electro- hydraulic servo motor

Investigation on wing rock in low speed wind tunnel for a fighter configuration