| 单词 | bonding strength |
| 释义 | 例句释义: 粘合强度,结合强度,胶接强度,黏合强度,粘结强度,粘接强度 1. The melting state of powder and bonding strength of coating did not vary much within spraying distance in the experiment. 在试验的喷距范围内，喷距对粉末的熔化状态和涂层结合强度均无明显影响。 dictsearch.appspot.com 2. The influence of changing the milled groove depth on testing results of the surface bonding strength of MDF was analysed through experiment. 通过试验分析比较铣槽深度的改变对中密度纤维板表面结合强度测试结果的影响。 www.dictall.com 3. The ions bonding strength in TNA is weaker than that of TATB due to the small difference among the distance between ions in TNA and TATB. 由于TNA和TATB中离子之间的距离差异也很小，所以，TNA分子中的离子键强度比TATB分子中弱。 www.juhe8.com 4. in order to improve their adhesive bonding strength, you can choose to use and easy to apply the tapioca starch, potato starch. 为了提高黏合强度，可选用黏合力强的木薯淀粉、马铃薯淀粉。 www.bing.com 5. Choose spraying process parameters are the main principles of the coating and improve the bonding strength of the substrate. 选择喷涂工艺参数的主要原则是提高涂层与基材的结合强度。 www.bokee.net 6. The main method which judges whether an adhesive system works or not is the bonding strength test. 粘接强度测试是评价一种牙本质粘接系统性能的重要方法。 www.fabiao.net 7. The article analyzed the relations between the bonding pressure and the bonding strength through the experiment. 通过实验，研究了键合强度与键合压力间的关系。 www.magsci.org 8. The paper analyzed the relations between the bonding pressure and the bonding strength through the experiments. 通过实验研究了键合强度与键合力之间的关系。 www.ceps.com.tw 9. Discrete Manufacturing: A process engineer needs to characterize bonding strength of two components after a process change. 离散生产：一个过程工程师需要在过程发生变化后，描述两个组件的粘接强度。 wenku.baidu.com 10. The results prove that the initial bonding strength mostly depends on total reduction and heating temperature of Al. 结果表明，轧制变形程度和铝层加热温度都是影响复合板初结合强度的主要因素。 www.chemyq.com 1. The interface stability and the interfacial bonding strength is getting better with the reduction of the interface deformation rate. 界面变形率越小，界面稳定性越好，界面结合强度越高。 www.fabiao.net 2. In ultrasonic wire bonding process, the bonding pressure is one of the most important factors to the bonding strength. 在超声引线键合过程中，键合压力是影响键合强度的重要因素之一。 www.dictall.com 3. The experimental results suggest that the bonding strength of nickel-lanthanum electrodeposits is higher than that of bright nickel. 实验结果，镍-镧镀层与基体的结合强度高于亮镍镀层与基体的结合强度。 www.ceps.com.tw 4. The equipment for measuring bonding strength of gunning mix is developed, the structure, measuring method and application are presented. 开发出用于测定喷补料接着强度的试验装置，介绍了装置的组成、测定方法和应用试验。 www.chemyq.com 5. Experimental results showed that the bonding strength of metal-coated diamonds with alloy or metals was improved markedly. 实验表明，渗覆金属处理可以使粘结合金或金属对金刚石的粘结力大大增强。 www.chemyq.com 6. The results showed that bonding strength and water resistance of the modified adhesive have improved obviously. 实验结果表明，改性胶粘剂的耐水性和粘接强度较普通的聚醋酸乙烯乳液有明显提高。 www.chemyq.com 7. The results show that the joint forms which have less stress, concentration and less peel stress can raise bonding strength greatly. 试验结果表明：降低应力集中及剥离应力小的接头形式可有效地提高胶接强度。 www.chemyq.com 8. The poplar plywood bonding strength with PUF resin increased as the hot-pressing temperature increased. 使用PUF树脂压制的杨木胶合板的胶合强度也随着热压温度的提高而逐渐增加。 www.13191.com 9. The curing process of urea-formaldehyde resin is to transform the linear resin into crosslinked one, by which give resin bonding strength. 脲醛树脂的固化是将线型可溶性树脂转化成不溶不熔体型结构并获得胶接强度的过程。 terms.shengwuquan.com 10. Good smoothness , high bonding strength , stable ink absorption , color expressive force, the anti-core , self-cleaning. 平整度好，粘合强度高，吸墨性优，色彩表现力强，抗芯吸，自洁性强。 lillian77681.b2b.youboy.com 1. The higher the bonding strength of resin with fiber, the better the mechanical capabilities of composites. 树脂与纤维结合面粘接强度大的，其复合材料的力学性能好。 www.yhclgy.com 2. The experiment showed that only when the bonding pressure in a moderate conditions can the largest bonding strength be reached. 实验发现，只有在键合压力适中的情况下，键合强度才能达到最大。 www.magsci.org 3. in addition, the introduction of a long chain and polyaldehyde can ensure the resin to have great bonding strength and water resistance. 另外，长链和多醛的引入保证树脂具有良好的胶结强度和耐水性。 ip.com 4. Using specially designed tensile test method the bonding strength between coating and substrate was precisely measured. 用特定的拉伸试验方法，精确地测量了覆层和钢基体间的结合强度。 www.juhe8.com 5. modified phenol-formaldehyde resin and cationic starch could efficiently increase the bonding strength of fibers. 改性酚醛树脂和阳离子淀粉能有效提高纤维之间的结合强度。 www.ceps.com.tw 6. The effects of catalysts on the bonding processing property and bonding strength of polyurethane adhesive were studied in this article. 研究了催化剂对粘接工艺性能及粘接强度的影响。 www.chemyq.com 7. The experiment methods of the bonding strength between deformed steel fiber and concrete was self-designed. 自行设计了异形钢纤维与混凝土粘结强度试验方法。 www.dictall.com 8. Paper strength improvements realized by increasing the fiber -to -fiber bonding strength and bonding area. 强度提高主要是由于双助剂增强了纤维间的结合面积及结合强度。 www.chemyq.com 9. The present invention relates to a filter stick bonding strength detector and use method. 本发明涉及一种滤棒粘结强度检测仪及其使用方法。 ip.com 10. Glue: Hard brittle brownish solid made by boiling hides and bones. Dissolves in hot water with good bonding strength. 动物胶：通过煮沸处理动物皮和骨骼而获得的硬而脆的褐色固体。它溶于热水并具有良好的粘合性能。 dict.ebigear.com 1. A new method for measuring bonding strength between electroplated layer and substrate of diamond tool is proposed. 提出一种新的电镀金刚石工具镀层与基体结合强度测试方法。 www.ceps.com.tw 2. When the interfacial bonding strength increase, the interfacial shearing stress on the whisker increased. 当界面结合增强时，晶须上承受的界面剪切应力变大。 www.ceps.com.tw 3. The values of micro-tensile bond strength and shearing bonding strength were different and the former was obviously higher. 微拉伸、剪切两种检测方法测得值相差较大，微拉伸强度明显高于剪切强度； www.fabiao.net 4. This paper analysed the influence of specimen thickness on test results of surface bonding strength of thin MDF. 分析比较薄型中密度纤维板试件在检测时组合厚度的改变对其表面结合强度测试结果的影响。 www.dictall.com 5. Liquidambar formosana, Schima superb mature wood of peeled veneer bonding strength than the national standards for technical requirements. 枫香、木荷的成熟材的旋切单板胶合强度超过国家标准规定的技术要求。 paper.pet2008.cn 6. OBJECTIVE: To compare bonding strength of the fiber post after 4 different surface treatments by using of polyurethane binder. 目的：应用聚氨酯黏结剂比较纤维桩经4种不同表面处理的黏结强度。 www.bing.com 7. The bonding strength of adhesive was mainly related to the contents of phenolic substances in pyrolysis bio-oil. 胶粘剂的胶接强度主要与热解生物油中酚类物质含量有关。 lib.cqvip.com 8. The effect of the crosslinking temperature on the bonding strength is studied. 交联温度对共混乳液粘接强度影响亦被研究。 d.wanfangdata.com.cn 9. The layer is smooth with higher microhardness, corrosion and bonding strength by using the proper process. 在合适的电刷镀工艺下，镀层表面平整、光滑，具有较高的显微硬度、耐蚀性和结合强度。 www.chemyq.com 10. If we are unable to remove the oxide coat, even it is reluctantly soldered, the bonding strength is very weak. 如果我们未能将氧化层除去，即使勉强沾上焊锡，其结合力量也是非常弱的。 blog.china.alibaba.com 1. Especially, the effect of spraying distance on bonding strength is very obvious. 尤其是喷涂距离，对涂层与基体之间的结合强度的影响非常明显。 lib.cqvip.com 2. Glass pre-coated layer of reagent (primer) in order to increase the bonding strength of glass and EVA. 玻璃事先涂一层试剂（primer）以增加玻璃和EVA的粘接强度。 www.docin.com 3. And the effect of some factors on bonding strength is also introdueed. 并阐明对胶粘剂粘着力产生影响的一些因素。 www.chemyq.com 4. On the other hand, through the analysis of bonding strength, 1% of bonding area is needed at most. 另一方面，通过粘结强度分析，发现只需要1%不到的粘结面积。 www.lw23.com 5. Study of the bonding strength of bioceramic coating by electrodeposition-hydrothermal synthesis 电沉积-水热合成法制备的生物陶瓷涂层与基体界面结合强度 scholar.ilib.cn 6. Comparative study of bonding strength between impression compound and alginate impression material 三种藻酸盐印模材料与印模膏粘结强度的比较研究 www.ilib.cn 7. Research advance on relationship between the fabrication of porcelain fused metal and porcelain-metal bonding strength 烤瓷熔附金属制作工艺与金瓷结合强度的研究进展 ilib.cn 8. Finite element simulation of a test model for interface bonding strength between coating and substrate 涂层与基体界面结合强度测定模型的有限元模拟 www.ilib.cn 9. Experimental Study of the Bonding Strength and Adaptation between Flowable Composite Resin and Enamel 光固化流动复合树脂与牙釉质抗剪黏接强度和扫描电镜的实验研究 www.ilib.cn 10. Interfacial Bonding Strength between Surface Coating and Substrate and Its Measurement 表面涂层与基体间的界面结合强度及其测定 www.ilib.cn 1. Evaluate of shear bonding strength of a self-etching adhesive to dentine in different conditions 牙本质表面不同状态对自酸蚀体系剪切强度影响的实验研究 www.ilib.cn 2. Measurement of the Interfacial Bonding Strength between Coating and Substrate by Single-pass Pendulum Scratching Test 用单摆冲击划痕法测定膜基界面结合强度 scholar.ilib.cn 3. Measuring the bonding strength between electrodeposited layer and tool substrate with digital-image correlation method 应用数字图像相关方法测量金刚石工具镀层与基体的结合强度 www.ilib.cn 4. Effects of Different Interfacial Conditions on Bonding Strength of the Plasma Sprayed Tungsten Coatings 不同界面对等离子喷涂钨结合强度的影响 www.ilib.cn 5. Bonding Strength between the Substrate and Protective Rust Layer of Weathering-steel 耐候钢表面保护性锈层与基体结合强度的研究 www.ilib.cn 6. Experimental Investigation on Interlayer Bonding Strength Between Slurry Seal and Pavement 稀浆封层路面层间黏结性能试验研究 www.ilib.cn 7. Enhancing Bonding Strength Between Diamond Grits and Plating Layer with Surface Activation Technique 用表面活化技术提高金刚石与镀层的结合性能 www.ilib.cn 8. Effect of Oxidation Layer at the Coating-Iron Substrate Interface on Bonding Strength of Electroplated Copper Coating 铜铁界面含氧层对镀层结合强度的影响 www.ilib.cn 9. Analysis of Bonding Strength of Two Room-temperature-curing Wood Adhesives 两种常温固化木材胶粘剂胶接强度分析 www.ilib.cn 10. Bonding Strength and Interface Effects of Different Dentin Bonding Surfaces on Alcohol-water-based Adhesives 表面状态对乙醇-水基黏接剂强度和界面的影响 www.ilib.cn 1. Experimental Research on Bonding Strength Between Concrete and Steel Bar After Cooled Down from High Temperature 高温自然冷却后钢筋与混凝土之间粘结强度的试验研究 service.ilib.cn 2. Study on Bonding Strength and Fractals of the Interface Between Glass Coating and Steel Substrate 玻璃涂层与碳钢基材结合性能及界面分形研究 www.ilib.cn 3. Bonding strength and interface effects of different dentin surface on acetone-based adhesives bonding 牙本质表面状态对丙酮基粘结剂强度和界面的影响 www.ilib.cn 4. Enhancing bonding strength between CBN grits and plating layer with surface activation technique 用表面活化处理法提高立方氮化硼与镀层的结合性能 www.ilib.cn 5. Good bonding strength: good bonding strength for cement concrete, asphalt concrete and timbers; 粘接力强：对于水泥混凝土、沥青混凝土、木材均具较好粘接力。 www.showxiu.com 6. Effect of Surface Strengthening on High Temperature Oxidation and Bonding Strength of EB-PVD Thermal Barrier Coating 表面强化对EB-PVD热障涂层的高温氧化性能及结合强度的影响 www.ilib.cn 7. Evaluation of Bonding Strength between Thin Film and Substrate by a New Indentation Tester 用涂层压入仪测定薄膜与基体结合强度的探讨 www.ilib.cn 8. Comparison of bonding strength in two different designs 两种黏结设计黏结强度的比较 www.ilib.cn 9. Accurate method for measuring bonding strength of interface between carbon fiber and concrete 碳纤维与混凝土界面粘贴强度的精确测量方法 www.ilib.cn 10. Measurement of Bonding Strength of Magnetic Sputtered TiN Coatings by Indentation Method 磁控溅射TiN界面结合强度的压痕法测试 ilib.cn 1. Measurement analysis of the bonding strength of shotcerting of three gorges right bank underground power station 浅谈三峡右岸地下电站喷射混凝土粘结强度检测分析 www.ilib.cn 2. Study on Bonding Strength and Corrosion Resistance of Micro-Arc Oxidation Ceramic Layer on Magnesium Alloy 镁合金微弧氧化陶瓷层结合强度与耐蚀性的研究 ilib.cn 3. Bonding strength and interface study with microtensile and LSCM methods of alcohol-water-based adhesives bonding on different dentin surface 牙本质表面状态对酒精-水基粘接剂强度和界面影响的微拉伸及LSCM研究 www.ilib.cn 4. High bonding strength splice adhesive for seaming EPDM waterproofing membrane 高强度三元乙丙防水片材接缝胶粘剂 www.ilib.cn 5. Influence of the Milled Groove Depth on the Testing Results of Surface Bonding Strength of MDF 铣槽深度对中密度纤维板表面结合强度测试结果的影响初探 ilib.cn 6. Bonding strength and interface study with microtensile and LSCM methods of acetone-based adhesives bonding on different dentin surface 牙本质表面状态对丙酮基粘接剂强度和界面影响的微拉伸和激光扫描共聚焦显微镜研究 www.ilib.cn 7. Effects of bonding manner and process controlling on dispersity of tensile bonding strength 工艺条件对拉伸试件粘接强度分散性的影响 www.ilib.cn 8. Polyatomic Silicon Drilling Fluids Which Can Enhance the Bonding Strength of Second Surface 提高二界面胶结强度的多元硅钻井液 www.ilib.cn 9. Study on Interfacial Bonding Strength of Gradient Aluminum Matrix Composite 梯度铝基复合材料层间结合强度研究 ilib.cn 10. Splitting Tensile Bonding Strength of Steel Fiber Reinforced Concrete to Old Concrete 钢纤维混凝土与老混凝土劈拉粘结强度的研究 www.ilib.cn 1. Experimental Studies of Bonding Pressure on Heavy Aluminum Wire Bonding Strength 键合压力对粗铝丝引线键合强度的实验研究 www.ilib.cn 2. The influence of bonding strength of denture soft reline resin by different surface treatments 不同表面处理对义齿软衬树脂黏结强度的影响 www.ilib.cn 3. PC controlled testing platform of bonding strength for different materials PC机控制的异种材料粘接强度测试平台的研制 www.ilib.cn 4. Design and fabrication of simple hydraulic testing machine for bonding strength 简易手动液压胶接强度试验机的设计制作 ilib.cn 5. Effects of Pretreatment on the bonding Strength of Silver Coatings on Titanium Substrate 预处理对钛上镀银结合力的影响 www.ilib.cn 6. Preparation of curing agent of high initial bonding strength polyurethane 一种高初粘力聚氨酯胶粘剂固化剂的研制 www.ilib.cn 7. Factors Influencing Bonding Strength of API Adhesive Bonded Mongolian Oak 影响API粘接柞木的强度因子研究 ilib.cn 8. Improving Bonding Strength of Arc-spraying Chromium Coatings by Arc-ultrasonic 电弧超声提高电弧喷涂铬涂层的结合强度 www.ilib.cn 9. Bursting strength Zipper strength Bonding strength 顶破强力拉链强度粘合强力 wenku.baidu.com 10. Study of the Effect of Temperature Factor on Thermosonic Bonding Strength 温度因素对热超声键合强度的影响实验研究 www.ilib.cn 1. Interfacial bonding strength of epoxy coating on pure titanium substrate 纯钛基材上环氧基涂层界面结合强度的研究 www.ilib.cn 2. Effects of Low Temperature Plasma Treating on Bonding Strength of Bamboo Strip Surface 低温等离子体处理对竹片表面胶合性能的影响 www.ilib.cn 3. Experimental Study on Interracial Bonding Strength of the Film by XRD 基于XRD的薄膜界面结合强度试验研究 www.ilib.cn 4. The Application of Organo-metallic Process in Enhancing the Bonding Strength 有机-金属化工艺在增强粘结强度上的应用 www.ilib.cn 5. Microtensile bonding strength between root canal wall and root canal rehabilitation materials 上前牙薄弱根管重塑材料对根管内壁的粘结强度实验研究 www.ilib.cn 6. Effects of different type of spectrum on the bonding strength of the fibre post 不同类型光固化灯对纤维桩黏结强度的影响 www.ilib.cn 7. Hot Corrosion Resistance and Bonding Strength of Thermal Spraying Ni-Cr Coatings 几种Ni-Cr系热喷涂涂层的抗热腐蚀性能和结合强度 ilib.cn 8. Methods to enhance bonding strength between diamond and matrix in diamond tools 金刚石工具中金刚石与胎体结合力的提高方法 www.ilib.cn 9. Development of two-component PU adhesive with high bonding strength 高强度双组分聚氨酯胶粘剂的研制 www.ilib.cn 10. Comparison of Different Cements on Bonding Strength of Titanium Dowel 不同粘接剂对钛桩粘接强度的比较 www.ilib.cn 1. Testing methods for bonding strength of ceiling boards adhesives 天棚木板用粘结剂粘结强度测试方法 www.ybqi.gov.cn 2. Influence of length and position of recessing on bonding strength of single-lap joints 间隙长度与间隙位置对单搭接接头强度的影响 www.ilib.cn 3. Effects of Metal Pretreatment on the Bonding Strength of Epoxy Resin Adhesive 金属表面预处理对环氧树脂粘结剂粘结强度的影响 www.ilib.cn 4. Study on Vibration Transformation and Bonding Strength Formation of Thermosonic Flip Chip 热超声倒装键合振动传递与键合强度形成研究 ilib.cn 5. Grey Prediction for Bonding Strength of New and Used Concrete 新老砼粘结强度的灰色预测 service.ilib.cn 6. Effect of protective methods of prepared vital abutment on bonding strength 活髓基牙预备后不同的保护方法对粘结力的影响 service.ilib.cn 7. A review on the influence factors of the bonding strength of fiber post 纤维桩粘结强度的影响因素 www.ilib.cn 8. Effect of pouring interval on bonding strength between model materials 不同灌注间隔时间对模型材料间结合强度的影响 www.ilib.cn 9. Standard Test Method for Cold Bonding Strength of Refractory Mortar 耐火灰浆的冷粘接强度的试验方法 forum.unionfacade.com 10. The bonding strength between Plat castable ceramics and enamel Plat铸造陶瓷与牙釉质粘接强度的研究 www.ilib.cn 1. Formation process of bonding strength during wood gluing operation 木材胶接时胶合强度的形成过程 service.ilib.cn 2. Measurement Research of Wafer Bonding Strength 圆片键合强度测试方法分析 www.ilib.cn 3. Research of Bonding Strength and Type of High Velocity Arc Sprayed Coatings 高速电弧喷涂涂层的结合强度与结合方式研究 www.ilib.cn 4. Effect of Low Temperature Plasma Treatment on the Bonding Strength of Denture Base 低温等离子体改性基托树脂表面粘结性能的研究 ilib.com.cn 5. The Analysis of Dispersing and Error in the Test of Bonding Strength ot Putty for Interior 建筑内墙腻子粘结强度测试离散性及其误差分析 www.ilib.cn 6. Testing method for adhesion and bonding strength of geo composites 粘合及粘结强度试验法 www.ybqi.gov.cn 7. The Bonding Strength and Failure Modes of Thermal Barrier Coatings 热障涂层结合强度及失效模式研究 www.ilib.cn 8. General rules for testing methods of bonding strength of adhesives 粘合剂粘合强度试验方法通则 www.ybqi.gov.cn 9. Testing methods for bonding strength of wall boards adhesives 墙壁木板用粘结剂粘结强度测试方法 www.ybqi.gov.cn 10. Effects of microarc oxidation duty cycle and frequency on the bonding strength of titanium to porcelain 占空比和脉冲频率对钛微弧氧化表面处理后与瓷结合强度的影响 www.ilib.cn 1. Measurement System for Wafer Bonding Strength 硅片键合强度测试系统研究 scholar.ilib.cn 2. Influences of Water Binder Ratio and Dosage of Ultra Fine Fly Ash on the Bonding strength of HPC to Steel Bar 水胶比、超细粉煤灰掺量对高性能混凝土钢筋握裹力的影响 www.ilib.cn 3. Effect of the Filler Metals on the Bonding Strength of Abrasive Disc 钎料对单层钎焊砂盘磨粒结合性能的影响 www.ilib.cn 4. Computing method of bonding strength safety margin for service life 达到使用寿命时粘接强度安全系数的计算法 www.ilib.cn 5. Bonding strength of explosive flame plating layer 爆炸喷涂层结合强度 www.ilib.cn 6. Development of Epoxy Adhesive Tape with High Bonding Strength and Heat Resistance 高强度耐热环氧胶带的研制 www.ilib.cn 7. Bonding Strength Evaluation of IBED CrN Coatings 离子束增强沉积CrN镀层膜基结合强度的测定 ilib.cn 8. The Effects of Nd: YAG Laser-aided Debracket on the Bonding Strength of Brackets and the Temperature of Pulp Cavity YAG激光辅助去除陶瓷托槽对托槽的粘接强度及髓腔温度影响的研究 168.160.184.78 9. Effect of bonding time on thick aluminum wire wedge bonding strength 键合时间对粗铝丝超声引线键合强度的影响 service.ilib.cn 10. Effect of pre-oxidation on bonding strength of titanium to porcelain 预氧化对钛-瓷结合影响的实验研究 www.ilib.cn 1. The effects of different etching on bonding strength 酸蚀时间对牙釉质粘接剂剪切强度影响的研究 www.ilib.cn 2. Effects of Wood Material Factors on Bonding Strength of Wood 木材影响其胶合强度的诸因素分析 service.ilib.cn 3. Influence of dry or wet dentin bonding surface on wet bonding strength: a microtensile study 干燥或润湿表面对牙本质湿粘结强度影响的微拉伸强度研究 168.160.184.82:8080 4. Study on the bonding strength of the hard-polymeriyed resin veneers 硬质树脂贴面粘接强度的实验研究 www.ilib.cn 5. Effects of microarc oxidation time on bonding strength of titanium to porcelain 不同时间对钛表面微弧氧化处理后与瓷结合强度的影响 www.ilib.cn 6. The effect of Laser Treatment on the Bonding Strength Between Ceramic Substrate and Cu Electroless Plating layer 激光表面处理对陶瓷基底化学镀铜层结合力的影响 scholar.ilib.cn 7. bonding strength of laminated fabric 双层织物的结合强力 www.bing.com 8. The effects of microarc oxide treatment on the bonding strength of titanium to ceramic 钛表面微弧氧化处理对钛瓷结合强度的影响 www.ilib.cn 9. Testing Surface Bonding Strength for Thin MDF 薄型中密度纤维板表面结合强度的测试 ilib.cn 10. The Effects of Different Rapid Cooling Time to the Bonding Strength of Two Kinds of Titanium-Porcelain Powder and Titanium 不同快速冷却时间对两种钛瓷粉与钛结合强度的影响 www.ilib.cn 1. Study on novel furan resin with high bonding strength 高粘结强度新型呋喃树脂的研制 www.ilib.cn 2. The Effect of Air Interlaced Yarns on Bonding Strength of Coated Fabrics 空气变形丝对涂层织物剥离强度的影响 www.ilib.cn 3. The Effect of Anodizing on Bonding Strength of Porcelain Fused to Alloy 阳极钝化法对金瓷结合强度的影响 www.ilib.cn 4. The Effects of Joint Forms on Bonding Strength 接头形式对胶接强度的影响 service.ilib.cn 5. Calculation of Bonding Strength of Fly-Ash Concrete Based on BP Network 基于BP网络的粉煤灰混凝土钢筋握裹力计算 www.ilib.cn 6. The Study on Factors for Their Influences on the Bonding Strength of Green Fire Retardant Plywood 影响阻燃胶合板胶合强度因素的研究 ilib.cn |
| 随便看 |
|
英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。