isothermal

Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .

Autogenous deformation: the bulk deformation of a closed, isothermal cementitious material system not subjected to external forces.

The equilibrium solubility of AlN in austenite at different temperatures and its isothermal precipitation have been studied.

A non-isothermal kinetic model, which took account of the effect of microwave, was proposed to fit the experimental data.

Under consideration of cost, it is therefore suggested to let the isothermal tempering process last just for 30 min in practical use.

During the pumping cycle the gas is in intimate contact with the sealing liquid and compression is nearly isothermal.

The results show that the joint can be strengthened through near isothermal forging and gradient heat treatment.

AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES IN A ISOTHERMAL AIR DISCHARGE.

The principle of isothermal calorimetry, typical instrument (TAM Air) and its application in field of cement hydration have been described.

MEMS; hot embossing; isothermal solidification; solid-liquid interdiffusion ; metallic micro-devices.

Reference Channel. On a thermocouple scanner card, the channel that measures the temperature of the isothermal block.

Isothermal forging a process currently used products, products, uniform microstructure, mechanical performance is good.

The thermal damping is maximum for frequencies corresponding to pulsations that are somewhere between isothermal and adiabatic.

Within less than 1 millisecond the steep-fronted shock wave has traveled some distance ahead of the isothermal region.

Using the method of isothermal forging spheroidal graphite cast iron pipe of good quality can be produced.

Compared the two cooling methods, the microstructure were more homogenization and diversity by isothermal cooling method.

Isothermal forging of semi-finished products are close to finished size, very small margin.

The phase transformation and weight loss rate of ludwigite in oxidizing roasting were studied by DTA-TG, isothermal TG and XRD.

OBJECTIVE To establish the single time point isothermal experiments at constant humidity stability test of penicillin potassium.

The mechanical properties of nodular cast iron can be further improved by isothermal quenching.

Rolling circle amplification (RCA) is an isothermal nucleic acid amplification method which is simple, rapid, highly sensitive and specific.

The non isothermal effects of gas absorption are presented with select set of parameters.

The influences of isothermal quenching temperature on the retained austenite and mechanical properties of ADI were studied.

The three dimensional effect of natural convection on a mini scale isothermal plate in an enclosure is numerically studied.

The dye sorption characteristics of carbonized sludge and activated carbon were studied by using isothermal adsorption experiments.

Under the calefactive and isothermal conditions, the seepage flux increased nonlinearly as the pore pressure increased.

The crystallization behavior of cocoa butter was investigated using DSC under non-isothermal environment.

Anisotropy of isothermal remanent magnetism is a recently developed technique for rock fabric study.

Objective To investigate the influence of several factors on isothermal automated DNA sequencing.

The isothermal crystallization kinetics indicate that the graft group can accellerate the crystallization rate of PP, and doesn't . . .

With the isothermal holding time prolonged, the thick rod-like upper bainite associated and gradually developed into featherlike bainite.

Among those forging methods, isothermal forging obviously exceeds others for its high quality and low cost.

The outline of superplastic and anisotropic behavior in AZ91D grain refined by isothermal-rolling is summarized comprehensively.

After isothermal normalizing, SAE8620H steel gear obtained the ideal hardness, micro structures and fine cutting behaviors.

Isothermal Forging of the forming speed is very slow, usually on special equipment, and require special mold heating device.

Then, evolvement laws of plasma in both isothermal stage and adiabatic expansion stage are discussed.

The spherulitic growth rate and isothermal crystallization rate of PEG or PLLA were influenced when the other component was added.

A new forge residual heat isothermal normalizing technique for alloy carburizing steel is put forward.

The problems and trends of superplastic isothermal forming process are described.

Effect of isothermal normalizing process parameters on structure and hardness of forged gear stocks, has been discussed in this paper.

Further, ferrite grain size would grow combined with the ferrite volume fraction decrease during isothermal hodding.

The thermal decomposition of the complex was studied under the non-isothermal condition by TG-DTG and IR techniques.

The ferrite is obtained first through annealing, then biphase structure of ferrite and bainite is obtained through isothermal quenching.

In addition, the structure and properties of these catalysts were characterized by XRD, N2 isothermal adsorption-desorption, H2-TPR etc.

This paper introduces some methods which are applicated to calculate Curie isothermal surface by regional magnetic date.

A simple computational model for isothermal phase change problem was based on the enthalpy formulation.

Based on the results, the main technical parameters of coal isothermal adsorption testing method were defined.

Isothermal Block. The thermally conductive block that equalizes the temperature of all thermocouple connections.

Non-isothermal type of pot should be noted that the temperature rise, let alone burn Ganguo.

Quenching brightness and isothermal tempering aspects, such as the quality is superior to similar conventional equipment.

an isothermal process is a constant-temperature process.

Then we're going to have another isothermal step, a compression to some point four.

The stress-strain date and curve were obtained from the isothermal compression experiment of 7A04 Al alloy.

The mechanical behavior of 7A04 alloy in the semisolid state has been studied through isothermal compression tests.

Low temperature thermal debinding non-isothermal kinetics of paraffin wax in PIM was studied by TG.

Newton had discovered the isothermal velocity of sound in air.

Isothermal spheroidizing process for H13 hot-working die steel was studied in th is paper.

The isothermal deep draw ability of Mg-3Al-Zn(AZ31) magnesium alloy sheet was investigated.

So here's path A, it's isothermal.

A steady state isothermal two-phase flow model is presented in this paper to study water transport in PEM fuel cells.

Comparison of two heating methods of isothermal quenching used for ADI friction wedges

An investigation of the non-isothermal pyrolysis of two types of rayon fiber in an inert atmosphere

The Degradation Kinetic Study of Polystyrene by a Combination of Non-isoThermal Differential and Integral Methods

Numerical Simulation of the Inner and External Isothermal Flow Fields of a Venturi Air-register Containing an Inlet Swirler

Technical Research and Realization means of Isothermal Aluminium Extrusion

Isothermal Crystallization of Isotactic Polypropylene Nucleated with Substituted Aromatic Heterocyclic Phosphate Salts

Experimental investigation on rate of ice formation around a horizontal isothermal tube in a rectangular enclosure

Estimation of the Critical Increase Temperature Rate of Thermal Explosion of Nitrocellulose Using Non-isothermal DSC

Simulation study of influence of sporadic nucleation on isothermal crystallization of polymers

Superplasticity of Spray Formed Ultra-High Carbon Steel and its Microstructure and Properties after Isothermal Forging

Numerical Simulation of Two Dimensional Isothermal Viscoelastic Polymer Flow in Gas-assisted Extrusion

Comparative Study of Drying American Ginseng Using Isothermal Heating Air and Ventilating and Heterothermal Far-infrared Radiation Ways

Study of influence of different isothermal adjustment process routes on titanium alloy blade profile

Discussion on isothermal normalizing of forging steel billet used to make gears of automobiles

Analysis of Isothermal Non-Newtonian Elastohydrodynamic Lubrication of Elliptical Contacts with Two Arbitrary Surface Velocities

Comparison Analysis on Water and Salt Movement Characteristics under Isothermal and Non-isothermal Conditions

Characteristics of Isothermal Solidification Stage and Analytical Solutions for The Stage in Transient Liquid Phase Bonding Process

Numerical Simulation of Three Dimensional Isothermal Power-law Polymer Melt Flow within a Rectangular Convergent Channel

The Measurement of Thermal Expansion Coefficient and Isothermal Compressibility for Polypropylene Random Copolymers

Loop-Mediated Isothermal Amplification Technology and its Application in Virus Detection

Non-Isothermal Crystallization Behavior of Polypropylene Filled with Ammonium Polyphosphate

Numerical Simulation for Non- Isothermal Planar Contraction Flow of Micro Scale Polymer Melt

Research on Characteristics of Isothermal Hot Rotating Airflow Bending Upwards in Furnace of A Tangentially Fired Utility Boiler

Full-scale measurement and study of non-isothermal air flow pattern in a gymnasium

Estimation of the Critical Temperature of Thermal Explosion for Energetic Materials Using Non-isothermal Analysis Method

Catalytic gasification kinetics of low activity anthracites with carbon dioxide--Isothermal thermo-gravimetric analysis

Flame deformation and entrainment associated with an isothermal transverse fuel jet

Experimental study on non-equilibrium grain-boundary segregation isothermal kinetics of phosphorus and kinetics calculation

differential thermal analysis in an isothermal environment,

Directional radiation properties of an isothermal cylindrical cavity

Tectonic leakage of fault bounded aquifers subject to non-isothermal recharge: a mechanism generating thermal precursors to seismic events

Research Advances on Miscibility of Semi-crystalline Polymer Blends Evaluated by Isothermal Crystallization Dynamics

Melting Behavior of Polypropylene After Stepwise Isothermal Crystallization and Factors Affecting the Behavior

Numerical simulation of non-isothermal flow of fiber reinforced polymeric melt;

Stress as a function of temperature and isothermal relaxation in copper films on silicon substrates

Experimental Research on Hydraulic Resistance of Throttle Set with Special Structure under Non-Isothermal Condition with Single-Phase Water

Non-isothermal crystallization kinetics of batch bulk polypropylene and acrylamide graft polypropylene

Field Experiment Validation for the LSF Conceptual Model on Directional Thermal Emissivity of Non-Isothermal Surfaces

Evolution of dislocation configuration in deformed austenite during isothermal relaxation

Study of Isothermal Adsorption of Albumin on Acetate Fiber Filter Rod with Dye Affinity Ligand

Characteristics of Phase Transformation Thermodynamics for NiTi Wires under Non-Isothermal Conditions

Non-isothermal Crystallization Behavior and Kinetics of Metallocene Short Chain Branched Polyethylene

A numerical study of isothermal flows of a slit V-gutter

An Isothermal Three-Parameter Equation of State Applied to Alkali Halide Crystals under High Pressures

Reaction-diffusion equation in a non-isothermal system affected by electrical field and stability of CNO cycle

Isothermal Crystallization Behaviour of Ternary-Monomer Solid-Phase Graft Polypropylene

Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

spot annealing process annealing spheroids annealing isothermal annealing

Studies on the Binding of Sodium Dodecyl Sulfate to Cellulase by Isothermal Titration Calorimetry and Fluorescence Titration

Feasibility of Isothermal Normalizing Technology Utilizing Residual Forging Heat for Cemented Gear Rough

Internal Relative Humidity Distribution of Concrete Under Isothermal Drying Conditions

Isothermal crystallization behavior of binary-monomer solid phase graft copolymer of polypropylene

Free-convection Boundary Layer on an Isothermal Elliptic Cylinder

The Application of Loop-mediated Isothermal Amplification of DNA in the Rapid Identification of Pathogenic Microorganism

The Setting Method of Experiment Parameters for Polypropylene Isothermal Crystallization

Running analysis and solution after revamping of isothermal - adiabatic reactor for hydrogen production

Loop-mediated isothermal amplification method for the diagnosis of infectious diseases

The Full Three Dimensional Isothermal Viscoelastic Numerical Simulation on the Extrusion Die Swell of Polymer Profile

Isothermal Experiment Research of a High Temperature Granular Bed Filter

Study on isothermal crystallization kinetics of a new polyester--PMT

Numerical Analysis of Isothermal Flow Velocity Distribution in High Temperature Air Combustion Furnace

Detecting the Stability of Cefminox Sodium Solution by Classic Isothermal Accelerated Tests and Multiple Linear Model

Non-isothermal Crystallization Kinetics of Rare-earth Luminous Polycaprolactam

Isothermal Hardening Production Line in Medium Frequency Inducing Heating for Rings of Railway Carriage Bearings

Chemical Kinetic Study of Ghee Isothermal Combustion

Semi-solid Microstructure Prepared with Directly Heating-Isothermal Treatment Method

Preferred frequency of air movement in an isothermal environment

Non-isothermal Kinetics of the Dehydration Process for Lithium Sulfate Monohydrate in Solid State

Simulation experiment for isothermal crystallization of polymers

Research Development on Non-dendritic Structure Alloy Slurry Produced with Semi-solid Isothermal Treatment

Studies on the Non-Isothermal Decomposition Kinetics of a New Polyimide

Computation methods of activation energy of amorphous alloy with non-isothermal crystallization

A new model for calculating the critical cooling rate of bulk metallic glass under non-isothermal condition

Microstructure observation of high purity low-carbon steel containing copper during isothermal aging

Study on Measuring Flow Rate Characteristics of Pneumatic Solenoid Valves by Isothermal Chamber Discharge

Study on the Kinetics of Synthesis of Dibutylphthalate with Zirconium Base Catalyst Under Non-isothermal Condition

Analyses on cryogenic nitrogen isothermal adsorption characteristics of coal reservoirs in the Ordos Basin

Combined isothermal extrusion technology for magnesium alloy component

Laminar Dissipative Flow in a Porous Channel Bounded by Isothermal Parallel Plates

Thermal decomposition mechanism and non-isothermal kinetics of the Mg, Al-hydrotalcite

Improvement on the Experiment Apparatus for Isothermal Oil Transportation Pipeline

Rapid Isothermal Continuous Spheroidizing Roller Hearth Furnace

Comparative study on pumpkin-powder by isothermal and stepwise temperature-adjustment vacuum drying

Non-isothermal Oxidation Kinetics and Mechanisms of Polycrystalline Graphite

Design and Application of Pusher Gas Combustion Isothermal Normalization Production Line

Applications of Isothermal Adsorption Equations to Heavy Metal Ions Adsorption Phenomena

Study on non-isothermal crystallization kinetics of PET containing different amounts of titanium dioxide

Numerical Study on Oscillatory Natural Convection in Enclosure with Vertical Isothermal Plate

Numerical simulation of dendrite growth for binary alloy during non-isothermal solidification

Effects of Isothermal Quenching Temperature on Retained Austenite and Mechanical Properties of ADI

Finite Element Analysis of Steady Three Dimensional Non-isothermal Incompressible Fluid

Study of Volume Dependence of Isothermal Bulk Modulus for Solids

Study on Non-isothermal Kinetics of Dissolving Reaction of Phosphate Ore with Microwave-induced Enhancement

Computer Simulation and Analysis of the Isothermal Formation of Vane-integrated Disk

isothermal process; constant temperature process

Kinetics and Mechanism of Decomposition of Nano-sized Calcium Carbonate under Non-isothermal Condition

modeling of two-dimentional isothermal transient full film and part film EHL; the application of multi-grid method in EHL;

Research on Isothermal Flow Field Characteristics of Cyclone Combustion Chambers

Studies on Thermal Decomposition Process and the Non-Isothermal Decomposition Kinetics for Analginum

The Application of Heat Pipe in Test Research of Isothermal Radiating in Carbonating Tower for Potassium Carbonate

Experiment and significance of isothermal adsorption of coal on methane under higher temperature

Research of the impact factors of MSW pyrolysis on the approximate isothermal condition

Surface modeling and isothermal precision forming of the compressor rotor

Bainite Transformation of Niobium Microalloyed Steel Under Isothermal and Continuous Cooling Conditions

Non-isothermal thermogravimetric investigation on kinetics of dehydroxylation of kaolinite

Post Isothermal Treatment on the Non-dewatering Urea Formaldehyde Particleboard

Influence of volume shrinkage on isothermal crystallization kinetics of polymer

Approaching on Cutting Pick Isothermal Quenching inside Gas Carburizing Furnace

Experimental study on isothermal hygroscopicity of aerated concrete

Isothermal Crystallization Kinetics of iPP During Self-nucleation Process

The results show that, under the same holding time, grain size and spheroidization increases with the increase of isothermal temperature;

Non-isothermal inflow performance model for horizontal well in heavy oil reservoir with thermal recovery

Study on the Kinetics of Synthesis of Iso-octyl Acetate with Zirconium Base Catalyst Under Non-isothermal Condition

Isothermal Normalization and Its Application of Part Blanks in Gear Box

Experimental study on moisture transfer in concrete under quasi isothermal condition

Mathematic Simulation of Isothermal Absorption of Collector on Coal Particle Surface

Simulation and Test of Radiant Directionality of Non-Isothermal Discontinuous Target

Simulation of multiple grains for isothermal solidification of binary alloy using phase-field model

Non-isothermal Crystallization Kinetics of Polypropylene Nucleated by Dehydroabietic Acid

An Experimental Study on Isothermal Moisture Absorption and Desorption Processes of Some Common-used Building Materials

Numerical modeling of non-isothermal non- Newtonian viscoelastic flow in mould filling process

Non-isothermal Thermal Decomposition Reaction Kinetics of TEGDN Gun Propellant

Decomposition Mechanism and Non-isothermal Reaction Kinetics of Cerium Citrate

Kinetics of Non-isothermal Thermal Decomposition of Cobaltous Salicylate

Numerical Simulation of Three- Dimensional Non- Isothermal Flow Field in the Mixing Process of Turbine Agitating Paddle

The Dynamics Study for Isothermal Heat Contraction of Polyester Industrial Filament

Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass

Temperature Control System of Bainite Isothermal Hardening Trough for Locomotives Bearings

Facility Production Line of Bainite Isothermal Hardening

The Isothermal Degradation of Polyoxymethylene

Isothermal extrusion for aluminium alloy extrusion by finite element analysis

Isothermal unidirectional elongation method of gene synthesis

The Influence of the Deformation Condition on the Isothermal-forming for the Type 240 Aluminum Piston Skirt

Study on Isothermal Precipitation and Growth Kinetics of Calcium Cerite Phase in Slag Bearing Rare Earths

Application of Isothermal Transformation Diagram in Heat Treating the Left and Right Pincers

Analysis on different factors affecting coal isothermal adsorption test

Application of Isothermal Curves in Estimating Minable Resource of Coalbed Methane

Non-isothermal Kinetics of Roasting of Copper Sulfide Concentrate in the Presence of Calcium Carbonate

Simulation and Optimization of Isothermal Photo-catalytic Reactor

Application of Dimension Analysis in Modelling Isothermal Chamber

Influence of Isothermal Heat Treatment on Semi-Solid Microstructure of Hypereutectic Al-Si Alloy

Numerical Simulation of Non-isothermal Dendritic Growth of Binary Alloy Using Phase-field Method

Prediction on the characteristics of isothermal annealing by using isochronal annealing data

A nonlinear kinetic model in isothermal branched-chain or autocatalysis chemical reaction in the CSTR

Determination of Isothermal Vapor-Liquid Equilibrium Data for Binary System DMC and Benzene

Study on the Non-isothermal Decomposition Kinetics of Sodium Polystyrene Sulfonate by TG Method

Model of Penetration Control System Based on Isothermal Line Distribution and Its Simulative Analysis

Penalty Finite Element Analysis of Three Dimensional Isothermal Polymer Melt Flow

DNS of scalar correlation-moment transport in isothermal turbulent reacting flows

Structure Formation of High Aluminum Zinc-Based Alloy During Isothermal Treatment

Isothermal Vapor-Liquid Equilibrium for Maleic Anhydride and Di-n-Butyl Phthalate Binary System

Numerical simulation of the isothermal molding process of cone-shaped aluminum hull

Study on Isothermal Quenching and Electric Spark Strengthening for Large Type Cavity Die with Thin Wall

isothermal annealing laser annealing stress-induced defect

Biomass Catalytic Gasification Kinetics using Non-isothermal TGA

Module Research of Non-Isothermal Problem in Model Experiment for Converter Combined Blown

The Isothermal Equation of Adsorption in Medium-aperture Activated Charcoal

Simulation of non-isothermal pressure swing adsorption for separating oxygen from air

Isothermal Extrusion Formation Technique for Copper Alloy Solid Cages

Isothermal Liquid-Liquid Equilibrium of Ternary Systems Containing N-Formylmorpholine

Transport vehicles of perishable goods - isothermal

Study on precision isothermal micro forming technology of aluminum alloy micro-gears

standard test method for determination of isothermal secant and tangent bulk modulus

Analysis of the Isothermal Transient Non-Newtonian EHL of the Involute Spur Gear

Non- Isothermal Oil Productivity Predicting Model of Heavy Crude Oil Exploited with Huff and Puff

Stochastic Bi-resonance in Non-isothermal CO Surface Catalytic Oxidation System

Simulation of isothermal solidification of ternary alloy with phase-field model

Research and Development of the Nondendritic Structure Slurry Producing of Magnesium Alloys by Semi-solid Isothermal Treatment

Research on Rotating Characteristics of Isothermal Airflow in Tangentially Fired Utility Boilers

Vertical partition of ocean heat transport in isothermal coordinates

Research on isothermal precision forming process of titanium blade wheel with finite volume method

A Numerical Simulation of Thermal Roundabout Flow Phenomenon in Non- isothermal Jet

Creation of Component Adsorption Isothermal Curve for Porous Media of Gas Reservoir

Polytropic Process, Adiabatic Process and Isothermal Process of Varying Mass System

Investigation on the three-dimensional isothermal flow field in a swirl combustion chamber

Numerical Study on Natural Convection in Square Cavity with Isothermal Baffles

Determination of Bound Water Boundary on Clay Surface by Isothermal Adsorption

Study on Isothermal Crystallization Kinetics of Ni-P-Diamond Composite Coating

Analyses of Isothermal Normalizing Process for Automobile Gear

Ultra High Strength Aluminum Alloy Isothermal Stamping Process

Polynomial Minimal Surface in Isothermal Parameter

Influence of the deformation parameter on isothermal deformation of 2618 aluminum alloy

Convergence of Approximate Solutions for Isothermal Flow

The usage of isothermal display and full temperature display of infrared radiation imaging in the study of meridian

Isothermal extrusion technology and design of die for magnesium alloy spring plank

Isothermal Equation of State of Aluminium

Isothermal Heat treatment Process Experiment of Batch-Produced ADI Gears

non-polluting due to nearly isothermal compression

Effects of Hot Deformation on Isothermal Ferrite Transformation for Low Carbon Nb-Mo Steel

Research on Irradiation Damage by Fast Neutron and Effects of Isothermal Annealing for BGO