center-line

Now add Mickey's eyes and nose. His eyes rest on the edge of one center line. Make sure that you add a little curve right below his eyes.

gradually after the recovery and entry phase of the arm stroke, while his head turns back pass the center line of his body.

This dimension must be at least twice the dimension from center line to handwheel.

The shaft system that consisted of propeller and shaft can rotate around the center line of the shaft when ship is sailing.

Measured in the set, the total station survey and design the main highway center line and the vertical and horizontal cross-section.

After the serve, players may move around on their sides of the court, but they may not step completely over the center line.

the drawing of the center line, long parallel to one another using transparent tape that help to prevent long-term use, wear line.

Legs remain straight, but feet move inward as speed increases until the edges of the feet converge on a center line at a fast trot.

On the horizontal projection plane, an included angle is formed between the thrusting bars and the longitudinal center line of the axle.

The center line of condenser shall be opposite to the exhaust end of syn gas compressor turbine.

I mark a center line on the riser to help me line it up with the clamps.

when need to install two respiration valves , the two valves should be symmetrical distributed with the center line of the tank.

This means that if the center line of the pipe has a clearance of 40mm or more, the pipe does not has to be cut.

the same distance from the road center line of the different Department of pollution of heavy metals to different degrees.

I also like to have a wide pull, but the hand never cross the center line of my body, and never come inside below my hips.

The error distribution law is simulated as to the center line in the workplace, and the error distribution curves are drawn as well.

Can a driver who crosses a solid line on the right of the center line of the highway be issued a ticket for the violation ?

Site on the center line, there is the door area, which is our actual race there is no much difference.

But as for telling you how to do facial features and such, I guess you're looking for the old 'draw an egg with a center line' thing.

in the long-term safety stock: a steady upside to elect the center line of stock.

you can use to draw a center line and choose a mirror toward the diagram mark then born "the mirror is to the line" .

The center line of shield segment lining has a certain deviation from the center line of alignment on a curve section.

This outward point is not to be more than 30 degrees from center line when viewed from above.

I mark the riser (front and back to make sure the riser is a perfect fit) I also mark a center line on both the form and the riser.

red horse slaughter stock: the center line to be elected to start the stock.

By not letting my hands cross the center line, I can swim in a more direct line.

control of upper and lower pressure to line up the center line, sticking the transplacement line.

Machining equipment: CNC lathe, machining center, line cutting and welding machines.

To order, specify description and extension length from center line of valve to top of handwheel or nut.

The Sartorius, crossing the thigh, also bends and turns the hip, pulling it away from the center line.

Another is noting the moving average line crossovers and their relationship to the center line.

In a side view, the axis (C) of the crankshaft (28) is offset upward from the center line (A) of the cylinder.

To order, specify description and extension length from center line of valve to handwheel.

Under Line, select the options you want for the center line, and then click OK.

Smart cards have electrical contacts and a thin metallic plate just above center line on one side of the card.

The squeegee ground parallel to the cutting edge is located at (Automata) publishes drum of center line.

With practice you can train your mind toread on "both sides of the road" even though your eyes are on the center line.

When flanges are integral with fittings or valves, holes for bolts are drilled to straddle the center line.

differs from the road center line of heavy-metal pollution in various ways.

Along the leg, there is a center line that runs from the top front to the top back.

Slotted center line to line up with indentation Centre, to the left and right deviatingn before and after as small as possible.

Bring forward two ways to compute the center line of steel tube and analyze thein respectie application.

All the actions disgust is in the center line.

As the speed increases the feet tend to converge towards a center line.

The legs tend to move toward the center line as speed increases.

White on toes and slim white snip on center line of face permissible.

You're slightly off to the right of the center line.

You've got these long instruments, and you're working off your center line.

To order, specify length from center line of valve to base of floorstand.

Marked center line and the former positions.

When the competition also has 30 seconds, Du Lin creates outside the center line violates a regulation, three punish in the threes .

Center line of blade profile.

Check the center line and grade line of the working face, assist surveyor or assistant surveyor to carry out the acceptance survey;

Probe into the New Method of Center Line Setting-out on the Road Construction

The center line of a shaft serves as an axis for a bearing;

Technique Analysis on Concrete Channel Lining Mechanical Construction of the Center Line of the Diverting Water from South to North Project

BA Bumper to Center Line of the Front Axle

the distance from the center line of each cam groove to the axis of each cam groove is gradually increased or decreased;

Draw the flange bolt holes across the center line with a ruler, assemble

Design of the River Model Sand in the Center Line of the Diverting Water from South to North Project Goes through the Anyang River

Cause Analysis on Unregulated Magnetic Center Line of Generator and Its Solution Measure

Computing Coordinates of Center-Line Points and Boundary-Line Points of Roads and Quick Measuring with the Electronic Total Station

Coordinate Setting out of Center Line and Border Pile for Overpass Ring Road

the visualization mine openings model was constructed by the way of the center line and the waist line;

The Center Line Setting-Out of Slip Road in Expressway Interchange

Estimating the Distance Between Rotating Axis and Center Line of Bar in Paraboloid Lapping Experiment

The best Existing curve elements are selected by using calculating method of distance from points to the center line

Establishment of Uniform Mathematics Model for Positioning the Center-line of Rail Transit

disc narrowly ovate, granulose, center line keeled and with short glochids;

Method for Setting Out the Center-line of Underground Roadway under Bump Pressure

Control the center line and grade line of the working face, carry out acceptance survey;

disc oblong-ovate, densely rounded granulose, center line keeled, margin prominent and forming a narrow rib;

A Study of Accuracy of Setting out Road Center Line with Total Station

Application of Laser on Collimation Degree Adjusting of Revolving Tubular Kiln Center Line

disc narrowly ovate to oblong-lanceolate, usually granulose, rarely smooth or keeled, with fine spiny emergences along center line;

Discussion on Checking Way of 13th Coupler Carrying Rod and Coupler Lateral Center Line Lateral Play From Left and Right

Center Line and Elevation Surveying Analysis of Freeway in Mountainous Region and Heavy Hill Area

A new algorithm of the center line detecting was proposed instead of the traditional thinning algorithm;

New Method of Calculating Center Line Point and Boundary Line Point Coordinates in Interchange Ramp

Setting-out of center line of workings

Electromagnetic height measurement in the center line level surveying of road

Project of Diverting Water from the Center Line and the New Countryside Construction in Hubei Province

Study on Application of Total Station Instrument in Center Line Layout of Expressway

Application of Excel to Coordinate Calculation of One by One Stakes of Highway's Center Line

Surveying and Laying of Center Line of Circular Curve Tunnel by String Method

Transformers; rollers; center-line spacings and rail gauges

Effect of Distance Between Center Line of Saw and Clamp on Cutting Efficiency

Algorithm and Realization of Automatic Drawing of Center Line for Road and Ramp

Adjustment of rolling center line of piercing mill

Electric And Manual Center-Line Wafer Butterfly Valve

Adjustment of rolling center line of piercing mill

Electric And Manual Center-Line Wafer Butterfly Valve

Electric Center-Line Wafer Butterfly Valve

glochids leathery, 1-1. 5 mm, bases widened and confluent into a narrow wing, sometimes with several short glochids along center line;

abaxially ovate, flat, with center line rib, with many fine tubercles and bristles;

MOLD CENTER LINE TEXTURED SURFACE DRAFT ANGLE

Manual Center-Line Wafer Butterfly Valve

Inform you of the Service Center Line # 3? ( ) ( )

Detection of structured light strip center line based on genetic algorithm

Inspection of center line of berth

Inspection of center line of berth

track center line; central lines of track

Keyway is located on center line of tooth

Impact of deviation of magnetic center line on T-G unit

center line of crest spillway

A Shortcut Method of Center Line Location of Road

center line of mine-swept route

Center to End Center to Face Checkered Plate Center line COD COL

The distance form center line

CHGR charger CKT CKW CL circuit clockwise center line CLSG closing CMR continuous maxinum rating

center line strip on berth

The Center Line Project of Water Source Irrigating Works from South to North in China and the Development of Nanyang Irrigation Works