inlet

The air distribution mechanism is composed of an air inlet pipe, a housing, and a burning cylinder.

Narrow River Inlet at the quiet water, food concentration, easy to choose the best habitat to fish.

Cut the stuff into pieces of meat whose sizes are similar to that of the feeding inlet after its skin and bone are removed.

Sean the plastic inlet to the mouth of the bottle, with a hard hose in the bottom of the visco-connected to the exhaust pipe on the syringe.

The refrigerator is the outdoor unit of an air conditioner on which a refrigerant inlet and a refrigerant outlet are arranged.

Generally, the particles near the outer side of the inlet are easy to separate.

For preventing the membrane from poisoning, the air inlet of the component can be provided with an air filter.

The filling component can be provided with an inlet of shielding gas to be filled into a shielding gas filling and filling position.

Then, we circled an inlet and, after a while, saw a little house. This place was in a kilometer-and-a-half from the enemy strongholds.

The sight is protected from misting by a filter of silica gel, which dries the air as it enters an inlet at the bottom of the sight.

and an air inlet port at the back end of the duster shell is provided with an air inlet filter screen.

Under restricted air inlet condition, the inlet angle has no influence on the air side performances of heat exchangers basically.

the inlet of the air inducing fan is additionally provided with an air adjusting pipe.

The bottom of each air-water cooker is provided with a water inlet and a water outlet flange.

The air gap must be at least two times the diameter of the water supply inlet and no less than one inch in diameter.

The air purifier includes a housing having an air inlet, an air outlet and an airflow path there through.

Our journey did not, in fact, begin at Hercules Inlet, where frozen ocean meets the land of Antarctica.

and an airflow passage for communicating the inlet and the outlet is formed between the fire-retardant parts and the heat-conducting plate.

The fan composes of a base fixed on the drive shaft, with the base placed on the support base at the side near to the air inlet.

the cover boards are provided with an air inlet and an air outlet for air circulation.

A flow path of hot water can be provided with a water inlet control valve, a temperature sensor, a water return pump and a cold-hot valve.

The condensation point is not the only basis for determining the allowable oil temperature at the inlet of heating station.

The Unit is designed to store collected dust for a year or more, depending on inlet dust loading.

Methods By drawing design, mould making and test, an air inlet valve to meet the requirements was manufactured successfully.

Please do not block the air inlet or outlet in case of reducing purifying effect and damaging the product.

He gave an interesting metaphor example of a water pool with two pipes, one for inlet and the other for outlet.

Separation of the water supply from the air inlet is accomplished by means of a diaphragm seal.

The sides of the oxygen enriched membrane device are all sealed except top, the bottom and the joint of the air inlet tube.

Ben and a number of his friends were fishing for minnows at the edge of an inlet.

The aero is commonly known as the great surrounded, basically include the inlet grille, car side spoilers, surrounded and tail etc.

If too much sample is injected, the volume of the vaporised sample can exceed that of the inlet.

A cooling medium inlet and a cooling medium outlet are arranged on the furnace wall of the heat exchange chamber.

The retractable cavity is provided with a zipper, and an aroma box is arranged near the hot air inlet of the retractable cavity.

and an air filter is arranged on an air inlet of the fan.

A device used for treating oil field waste water is characterized of including a water inlet area, a reacting area and a water outlet area.

Consequently, putting inlet at the surface of medium and putting outlet at the middle-upper part of the medium is advised.

An air conditioning unit is disclosed that includes a front portion providing air inlet and air outlet passageways.

The backwater inlet passes through a second valve and directly communicates with the concentrated water outlet of the pressure container.

At least one central duct is formed between at least two connectors forming an inlet and an outlet respectively.

the turbine shell inlet (1) is connected with an air exhaust manifold of the engine.

It is difficult to separate the inherent stability of the element configuration from that of the propellant inlet state.

There is an air hole nearby of the flange of No. 1 sanitary pump inlet pipe, to be renewed.

There is an approximate linear relationship among the column inlet pressure, the retention time of solvent, and the half peak width.

The present invention has no air inlet and outlet valves, and no balancing blocks, and the vibration noise is small.

The quantity of the rinsing water inlet is one or two and is connected with one or two rinsing water inlet pipelines.

The results show that the degree of wall superheat increases as the inlet velocity decreases and the heat flux increases.

The fan is arranged in the machine shell and between the wind inlet and the wind outlet.

A cover, including an air cowl, is removably mounted to the housing proximate the air inlet.

and the air inlet is arranged on the side or the bottom of the closed cavity.

the side edge of the hand disc is provided with a flanging, the hand disc is surrounded by air inlet holes.

Note: The above connections are available as outlet connections only. Strainer inlet connection is always Female NPT.

The control end of the two-position five-way valve (8) is connected with a compressed air inlet pipe through a switch (11).

The Urinal flush valve is able to be connected with top or rear water inlet urinal ceramics.

the oil tank is a closed structure; the closed oil tank is provided with a crude oil inlet and a crude oil outlet.

This sort of epiphany waits in almost every bay and inlet of South Georgia.

If the regulator is to remain out of service, protect the inlet and outlet fittings from dirt, contamination, or mechanical damage.

Among them, the inlet and outlet throttle hole diameters of the control volume are the key for the better injection performance.

The invention discloses an overflow hole type throttling structure for a medium inlet of a plate heat exchanger.

In Australia, China's import and export amount at the inlet and outlet of the proportion of the total basic remain stable.

The recess is preferably formed so as not to provide fluid, communication, from the inlet to the outlet across the rotor end surface.

A circulating pipe is connected with a washing water outlet and a washing water inlet on the washing drum.

A secondary combustion chamber is arranged above the combustion chamber and is provided with a secondary air inlet.

A step seal with a rubber gasket is used in a feed inlet, a feed outlet and an input and output end covers of the utility model.

A feed inlet, a temperature measuring port, a vacuum port and a discharge outlet are arranged on the furnace wall of the reaction chamber.

Inlet volute is one of the important parts of axial-flow compressor.

The remains of the sheet iron when making the air inlet holes of the FCU is not cleaned up and can scratch the repairman.

With the methods I've shown previously, addsome detail and edges to the border for the front air inlet.

On the top cover there are feed inlet and upper bearing, and on the bottom there are discharge gate and lower bearing fixed by facing bar.

Check initial pressure to see if full intended line pressure is applied at the valve inlet.

and the second pipe is connected with an inlet of the resistance component and also provided with a pressure adjusting device.

The inlet port is connected to the pressure line in and the outlet port should be connected back into the non-pressurized reservoir.

Pitch all horizontal inlet lines toward the steam trap to help eliminate potential water hammer problems (Fig. A).

Causes of the stray current corrosion in inlet and outlet of the electrolytic bath were analyzed to put forward a solution.

Light inlet window is located on edge of bath crock stage, did not have windowsill cut off, sunshine is aspersed wantonly in bath crock.

The outer wall of the furnace body is provided with a water inlet and a water outlet.

as the airflow of the spouting pipe is strong, powder falling from the powder inlet can be mixed with air quickly and symmetrically.

The higher pressure inlet flows through the valve and moves the ball to close the opposite inlet.

Whereas, the heat transfer of turbulence liquid film flow is not sensitive to liquid film inlet temperature.

The boiling heat transfer coefficient increases as the inlet velocity increases and the heat flux decreases.

The quantitative bottle is provided with a water inlet and a water overflow opening.

The substrate has at least one inlet port that routes fluid to the top major su*ce, and at least one outlet port for mixed fluid.

Water inlet end of an inner jet pipe and an outer jet pipe in the jetting body is larger than their water outlet end.

This process is conducted by adding a cleaning manifold to the inlet lines and pumping a cleaning solution through the system.

A breathing arrangement includes a patient interface (10), at least one inlet conduit (22), and a headgear assembly (31).

A mass spectrometer ion source and a mass spectrometer system containing the multi-inlet sampling device are also provided.

Slowly open needle valve "C" bypass (yellow) just as air inlet opens. Record differential pressure.

to adopt channel flow propeller to close the water inlet when the device stops working, without adding any sailing resistance to the ship.

The strong interaction between shock wave and boundary layer in the internal duct is like a bottleneck to the start of the inlet.

The space above the piston is now sealed due to the inlet valve closing and the exhaust valve having already closed.

The QH type safety valves are composed of two spring loaded safety valves paralleling. There is only one inlet.

heating medium pipelines are connected with the shell inlet and outlet of the heat exchanger.

The mixing section comprises a conical inlet of the mixing section and a variable section mixing chamber.

A second drive mechanism can drive the valve plate to be rotatably connected with the air inlet hollow shaft.

To prevent dead -heading, these pumps should be provided with a differential bypass valve. Inlet line strainers are Also highly recommended.

The shutoff valve with the test cock is to be mounted on the inlet side of the backflow preventer.

This sign demonstrates that the shoulder girdle is resisting entry into the pelvic inlet, and possibly impaction of the anterior shoulder.

A recycler with three holes as inlets can be used to feed metal, paper, plastic and grass and an inlet for garbage.

and the valve core (8) is arranged on a channel between the air inlet and air outlet of the valve body (2) in an opening manner.

What are the types of filters used for air inlet and outlet?

Amplitude and phase of pressure fluctuation at the inlet of draft tube as well as the inner flow in draft tube are analyzed in detail.

A substantial number of defects not removed by the finer are diverted to the unusable inlet and distal edges of the sheet.

The utility model is provided with a water inlet, the diseased regions can be flushed by water in the process of operations as required.

A condensing sheet is arranged on the top cover, and is located on the upper portion of the steam inlet.

Aerodynamic design method and numerical simulation are used to optimize the profile of the ram air inlet for enhancing the inlet pressure.

The capital and largest city of Norway, in the southeast part of the country at the head of the Oslo Fjord, a deep inlet of the Skagerrak.

the hollow part of the water sample bottle being communicated with the air discharge channel and the water inlet channel.

Analysis result shows that the great temperature decrease in reaction oil and gas pipe inlet is the main cause.

The water inlet edge of the socket embodies a lattice teeth pattern and the vane front end of the vane wheel corresponds with the socket.

Then this model was used to simulate AP combustion at different inlet boundary conditions and chemical mechanisms.

By-Pass can be used to equalize pressure at inlet and outlet before opening main valve; facilitating easy valve operation.

Against a slate-gray sky, the water of an ocean inlet had a slight greenish cast, interrupted by small whitecaps.

The closed cooling structure is connected to the air inlet and outlet of the casing and has matched final cooling structure.

The outlet hose ran to the engine manifold, and the inlet hose ran to the dashboard, where it was attached to a small dial.

Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.

Retractable blowers shall be provided for the convection evaporative surface (third pass) and inlet to the superheater.

A city of southeast South Korea on an inlet of the Sea of Japan north-northeast of Pusan.

You must open at least the air inlet and one air outlet before switching on the respirator.

Slowly open vent needle valve just as air inlet opens. Record differential pressure.

By-Pass can be used to equalize pressure at inlet and outlet before opening main valve; facilitates easy valve operation.

Inlet pressure losses developed during relief conditions must be taken into account when sizing the pressure and vacuum relief devices.

The flow to this half of the STW gravitates from the town and flows to an inlet sump. Located within this sump is the storm overflow.

After sealing the filter material outlet, the new filter material shall be added from the filter material inlet of the upper end.

This does not pose a problem, however, with pipelines and liquefied gas products where inlet pressure is maintained relatively constant.

A tail part of the purifying device is provided with a pesticide fertilizer inlet orifice.

Measures for adopting bellows expansion joint have been proposed to meet the requirement of allowable force in the inlet of pump pipeline.

Water enters from a water inlet at the upper part and is sprayed out through small water outlets at the lower part.

The inlet header has a channel for receiving a two-phase fluid from a fluid circuit and a chamber for collecting the fluid.

The total external inlet and outlet pipe are equipped with temperature and alarm components.

To reduce resistance from the suction section of pump, the water pump must be installed at the condenser inlet of air conditioner.

A sensor (5) is arranged in any position between an air inlet and an air outlet.

Basins are provided with a 4 " caulk inlet, 3" vent, and a large removable hand hole to permit access, as a standard.

Lift retainer and check assembly from valve body. To assist with removal a small flow can be applied by "cracking" the inlet valve slightly.

Similarly, the dehumidification process can be improved by decreasing the inlet humidity ratio or flow rates of the process air.

This looked at the restoration of oyster beds in Chesapeake Bay, an inlet that lies between Maryland and Virginia, in the United States.

At first, characteristic of every cell inside tidal inlet is studied.

Flexibility design method of large scale hot oil pump inlet piping is expounded as well as the layout of pipeline, support and hanger.

A narrow bay formed by an inlet from the Atlantic Ocean in southeastern Florida .

The damping effect of the honeycomb can reduce the influence of the inlet preswirl on the total temperature difference.

the lubricating time delayer is connected in series to a lubricating oil inlet channel of the turbocharger.

Disconnect water piping connections to the cold water inlet and the hot water outlet. Disengage the heater from the wall bracket.

These thrust losses may be very large if the inlet flow distortion is in the order of 15 to 20 percent.

The device comprises a controller and an assembly of inlet pipes and the controller is connected with the assembly of the inlet pipes.

Note: single-stage centrifugal pump for a single suction inlet of an impeller centrifugal pump.

There are shutters at both sides or other measures that prevent water from splashing by the air inlet.

The inlet is a strong scattering source in the aircraft head important attitude angle.

The core tube assembly has an inlet for receiving solid material at a rear end and an outlet for discharging material at a forward end.

The light generator is preferably placed parallel to and proximate the inlet face, thereby allowing a reduction in depth of the structure.

The doctor smashed one with an axe , and then we all got into the other and rowed to North Inlet .

however , for certain temperature sensitive materials the inlet gas temperature must be lowered.

Mating portions on the frame and tank (140) guide engagement of a tank outlet with a pump inlet tube.

Check valves must be installed with the inlet in the direction of arrow.

and a cooling water inlet and an outlet are formed on the water-cooled plate radiator.

and the water supplementing assembly is installed between an external water inlet pipe and a tap water supply pipe.

Never lubricate a regulator or use pipe dopes. This includes inlet fittings which are intended to be installed dry.

formed by an inlet from the Atlantic Ocean in southeastern Florida.

the interaction between the air inlet and the runner increases the middle-frequency pressure pulsation in front of the runner.

The circumferential rotational flow and pair whirls at the exit of the inlet were also found, and subsequently, the causes were analyzed.

The results showed that at high inlet velocity, the diameter of regenerator channel had a significant effect on toluene conversion.

The concentration of the effective component above the magnesium alloy molten surface can change along with the inlet concentration.

Then at last , one sunny morning , we sailed out of North Inlet and towards the nearest port in Spanish America .

An outlet of the feeding device is positioned between an inlet of the grinding roller and an inlet of the grinder-vein grid plate.

The new study inlet 6, 350 infants who were regularly evaluated for middle ear effusion during the first three years of life.

The sample system for the standard instrument incorporates XA inch tube fittings for sample inlet and outlet connections at the rear panel.

The research result shows that the outlet pressure rises rapidly when the frequent of the inlet pressure rises to a high value.

A more general evaluation can be done by testing the temperature of the air entering the fan inlet.

An experimental study was carried out on three-dimensional scramjet inlet flow.

Check if the cooling water tower works and if the water pumping direction is right, whether the inlet and outlet connect correctly.

Coriolis flowmeters do not require straight inlet or outlet runs.

A booster pump, used to increase the sterilization machine into this machine inlet pressure.

The results indicated that the shape of steam plume was influenced by the inlet steam pressure and subcooled water temperature.

Carefully clear inlet piping system of foreign matter and mount regulator with the flow arrow pointing in the direction of flow.

The relationship between operating performance and exhaust emissions is investigated with auxiliary fuel injected at the inlet port.

A device for degassing a flowable, viscous and pasty product includes a reactor having a product inlet and a product discharge outlet.

The sea-water inlet of refrigerating plant leaked, to be renewed.

Applying block structure grid and second-order zonal solver method, the numerical research on this inlet is presented.

Accurate simulation of the air-inlet and air outlet process of air valve is directly relative to the safety of water supply engineering.

The sample inlet moisture trap can be regenerated by following the instructions included with this trap.

The second inlet port requires connection to a second Regulated Air Source meeting Grade D Specifications.

Materials and manpower were sailed up Cook Inlet to a convenient anchorage on a dart-shaped peninsula.

The results showed that condensation temperature and condensation pressure increased with increasing inlet air wet-bulb temperature.

The labyrinth gland system operating at a bigger rotating speed can enhance its rotor stability by applying a rational inlet pre-swirling.

The cooling liquid tank is also equipped with an inlet, the inlet is connected with the outlet of the dry washer.

Unstart boundary is one of the most important issues of supersonic inlets, and also the foundation of inlet protection control.

clean the filter screens and mufflers as the case may be to avoid blocking the inlet and outlet.

Lowest viscosity can be obtained when inlet temperature and mixing temperature are in certain range.

SHIPBUILDING. INLET VENTILATORS. HEMISPHERICAL COWLS.

The gas duct layout of two-inlet spray scrubber was proposed to reduce the energy consumption of FGD system effectively.

A city of southeast Tasmania, Australia, on an inlet of the Tasman Sea. It was founded in1804 as a penal colony. Population, 47, 920.

The air from the classifier bag filter will be sent either to the chimney or partially or totally recycled to the classifier air inlet.

The inlet block valves on installed spare relief valves or valved connections shall be car-sealed closed (CSC) or locked closed (LC).

This engine consists of an inlet, a combustor, and a nozzle .

Hill Inlet, northern end of Whitehaven Beach, Whitsunday Island, Queensland.

Some high-performance engines have two separate camshafts, one for each set of inlet and exhaust valves.

The free water knockout has an inlet and deflector baffle near the top on one side and a gas outlet on the top.

It uses a fast actuated nozzle to follow the exhaust pulse, reducing the turbine inlet area periodically to increase exhaust-gas pressure.

the arms are easy found , in the sand hill , n . point of nor inlet cape , bearing e . and a quartern.

An urban district of southwest Ireland at the head of Tralee Bay, an inlet of the Atlantic Ocean.

RAW WATER: Reservoir filling, filter plant inlet flow control, storage reservoir release, cooling tower fill, flow control stations, etc.

The air pressure at the hot value inlet does not become excessively low.

The sucking room is provided on the bellmouthing end of the reducing pipe, another end of the sucking room is a suction inlet.

The inlet and outlet of cutting area of the machine are installed ith safety screens, high can guarantee personal safety of operators.

It eliminates the necessity of closing the inlet ball valve which could release pipe scale and foreign matter into the backflow preventer.

Then the dynamic response of system pressure, inlet flow of motor and motor torque is obtained.

As the simulation cannot capture the behaviour of the inlet edges and tunnels, these peaks are absent.

The observed inlet dimple can be tentatively interpreted by limiting shear stress or wall slippage.

B. filter net is set on the net ring bracket and straight-flow channel is formed between the outlet port and the inlet port of valve body.

Alternating pulses of the two chambers provide a stream which has small segments of alternating fluid from each inlet.

Cable inlet for bottom elevated cover plate : the cover plate can be dismounted to drill holes and the seal rings are provided.

Besides, mechanical properties of S inlet duct may be affected by bias symmetry layers. In the thesis, this effect is discussed.

An applicable study on inlet valve of hydraulic turbine is made herein for the preliminary design of a relevant project.

Connect the cooling water outlet with the cooling water inlet of the machine; and the cooling water inlet with the cooling water outlet.

Please install the cold inlet and the hot inlet in accordance with the marks, Incorrect way of installation would cause scalding.

Viscosity of pseudo-boehmite remains unchanged when inlet temperature is in certain range.

An essentially balanced single seat minimizes variation in delivery pressure resulting from varying inlet pressure .

The outer casing superior surface, forms the configuration of the suction inlet, are inclined to the downwards.

form of the inlet chambers to avoid flow separation.

The maximum pressure distortion in the inlet surface increases with the stator moving to the right then has decreasing tendency.

Inlet gas humidification greatly influences the fuel cell performance and temperature distribution.

The effects of nozzle structure, operating pressure, solid content and inlet temperature on alumina properties are discussed.

The water outlet of the micro water pump is communicated with the inner box. The water inlet is communicated with the outer box.

slough: Also slue A stagnant swamp, marsh, bog, or pond, especially as part of a bayou, an inlet, or a backwater.

An auxiliary ejector with as little blockage in the ducting as possible is placed behind the inlet of the diffuser duct.

On the basis of experimental results, effects of inlet parameters and cold air fraction on various performance parameters were analyzed.

Proper choice of geometric parameters is in favor of inlet starting characteristics.

The water inlet pipe of the water jacket is connected with an automatic water replenishing tank outside the furnace.

INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS. PERFORMANCE TESTING.

Connecting stage. Inlets and outlets can be moved. Inlet and outlet quantities can be specified.

and the top head piece forms a second inspection suction inlet with the inspection channel.

Manila: The capital and largest city of the Philippines, on southwest Luzon Island and Manila Bay, an inlet of the South China Sea.

Middle first bumper spacious horizontal air inlet and both sides circular fog lamp design, then brings broadly, the powerful visual effect.

The volume of liquid inlet chamber is increased through the rotation of push rod, and the polymer liquid enters through the self pressure.

Experimental research was carried on a three-stage low-speed axial compressor with different inlet distortion.

Upper and lower inlet connections shall, in general, be side mounted. Rotatable heads shall be specified.

at a constant engine speed, with increase of engine load, the gas consumption rate decreases and the inlet pressure increases.

The pressure of the flow is increased from the inlet to the outlet of the pump, and shows the maximal value in the impeller region.

The inlet and outlet of the pump shall not be aimed against people for avoidance of unexpected injury.

The spray tip includes a spray tip body having an inlet end for connection to a pressurized liquid supply.

The results indicate that the inlet Mach number and the diameter of projectile's ball head are important factors of aerodynamic heating.

The cooled feed gas flows through the choke where if expands from the high inlet well stream pressure to the sales line pressure.

The suction inlet of vacuum dust-collector can avoid the sucked hair or wire flowing to the belt to avoid the damage of suction inlet.

The suction inlet of pump shall be close to the sink or cooling tower.

Dunzhu found one calm inlet and drew yak skin boat on the bank .

The outlet opening fluidly communicates with an inlet aperture provided by the motor housing.

Connect the heat-resisting pipe with the inlet of cooling water.

Inch- long mollusk imported accidentally from Europe ; clogs utility inlet pipes and feeds on edible freshwater mussels .

A high capacity valve that can be tank wall-mounted. Inlet side has a machined flange and is female NPT pipe threaded for inlet connection.

Both water inlet and outlet pipelines should be supported by a separate stand and not by the pump body.

The manifold and line of airflow in important region of muffler are analyzed by airflow traces from improved muffler inlet.

The water-outlet of the water pump connects with the water-inlet of the water track by a water tube.

Later multiply by the appropriate number(see inlet-information of the Kato-set) to give the number or the eggs per gram faeces.