网站首页  词典首页

请输入您要查询的英文单词：

　

单词 injection mould
释义

injection mould

美 
英 
  • un.压铸模；注射塑模
  • 网络注塑模具；注射模具；注射成形模

英汉

网络释义

un.
1.
压铸模
2.
注射塑模

例句

释义:
压铸模,注射塑模,注塑模具,注射模具,注射成形模
1.
At least five years experience in injection mould design, development and proofing.
至少五年的注塑模具设计、开发和试模经验。
job.coal.com.cn
2.
The shrinkage rate of the injection mould for the various plastics is listed, the calculating applied examples are worked yet.
列出了各种塑料注射模的收缩率，还作了计算应用实例。
www.chemyq.com
3.
Highlights from the design, injection mould steel mold processing are admitted into a higher than normal mode has the request.
高光注塑模具从设计、钢材录取到模具加工都要比平常模拥有着更高的请求。
www.d8b.org
4.
A practical machining of injection mould cavity is taken as an example to show that HSM is one of developing trends in modern mould making.
同时以加工实例说明高速切削是现代模具加工的发展方向之一。
www.chemyq.com
5.
The whirly demoulding mechanism designs of shape-gear and the whirly plastic parts of bevel gear injection mould were introduced.
介绍了斜齿轮塑件注射成型模具的齿形型腔旋转式和斜齿轮塑件旋转式两类脱模机构设计。
www.chemyq.com
6.
Through the analysis of the drain valve of washing machine, an injection mould for the drain valve was designed.
通过对洗衣机排水阀塑料件的分析，设计了洗衣机排水阀注塑模。
www.chemyq.com
7.
Then in detail this paper introduces the merit and the feasibility of the expert system unifies with the plastic injection mould.
详细介绍了专家系统与注塑模具开发相结合的优点和可行性。
www.ceps.com.tw
8.
mastery of injection mould with the research method, process and mould principle and the operation of the machine.
上海亚虹塑料模具制造有限公司1）掌握注射模分型面的研配方法，过程及合模机原理和操作。
goabroad.zhishi.sohu.com
9.
Skill: Familiar with injection mould (interior automotive parts). Some oral English and good writing skill. Familiar with UG NX etc.
技能：熟悉注塑模（汽车内饰件），英语良好，熟练使用UG，NX等。
dictsearch.appspot.com
10.
The injection mould machine of FU CHUN SHIN (Tai Wan ) is made of the as cast SG iron castings produced by Fuxiong Company .
采用富雄公司铸态球墨铸铁件生产的（台湾）富强鑫注塑机。
www.bing.com
1.
During the design of injection mould for screw thread accessory, the key problem is the demolding of screw thread.
在螺纹零件注塑模设计中，螺纹脱模是模具设计的关键。
www.chemyq.com
2.
Can supervise injection mould testing, can check samples and provide solutions for improvements of plastic parts.
能监督试模，可以检查样品，并能够提供塑胶产品的改善方案。
www.sndhr.com
3.
An LCD intelligent instrument designed for use with an injection mould.
液晶显示智能仪表在注塑机中的应用。
carpad.cn
4.
Know operation procedure of injection mould project, supervise manufacturing process of mould supplier.
熟悉注塑模具项目的运作流程，监督供应商的模具加工进度。
www.sndhr.com
5.
t is necessary to provide a flow-way in the injection mould to connect the nozzle (of the injection machine) to each impression.
在注塑模中必须有一个流动通道连接喷嘴（注塑机上）到各个型腔。
eschool.sues.edu.cn
6.
will be careful in injection mould, cancel within the processor high-pressure operation.
将模具小心放入注塑加工机内，取消高压进行操作。
www.lifengsuye.com
7.
The design of side core- pulling framework and ejecting framework is difficult in designing injection mould.
侧面抽芯机构和顶件机构的设计是注射模具设计的难点。
dictsearch.appspot.com
8.
and performing injection molding by using a second injection mould and the insulation adhesive.
采用第二注塑模具和绝缘胶实施注塑。
ip.com
9.
The injection mould for a duplicator cover plate is designed.
设计了复印机盖板的注塑模具。
www.chemyq.com
10.
Injection mould is widely used in the field of machine, electronics, aviation, biology and commodity.
注塑模在机械、电子、航天航空、生物领域及日用品的生产中得到广泛的应用。
blog.sina.com.cn
1.
This article mainly expounds the debugging process of injection mould after installing it on the injection machine.
本文主要阐述了塑料模具之一注射模在注射机上的安装之后的调试过程。
www.chinaqking.com
2.
Chosen the mobile phone cover, paper introduced the method of the injection mould design.
本文以手机前盖注塑模具设计为例，介绍了常用注塑模具设计方法和流程。
www.chemyq.com
3.
The corresponding injection mould CAD also has been developed rapidly and plays an important role in injection mould design.
相应的注射模CAD也得到快速发展，在注射模设计中发挥巨大的作用。
www.fabiao.net
4.
The structure of 500kV composite insulator and its injection mould are designed. The manufactured technology process is improved.
完成500kV复合绝缘子的总体结构设计，完善绝缘子的生产工艺，并设计绝缘子注射用硫化模模具。
www.juhe8.com
5.
This text adopted one mould and one cavity injection mould to produce the camera front shell.
采用一模一腔式注射模，用于成型相机前壳；
www.ceps.com.tw
6.
To supervise the everyday wk of injection mould maintenance management.
督导注塑模具日常保养和管理工作。
dictsearch.appspot.com
7.
Design and making of the injection mould for other deep-cavity plastic parts have a certain reference value.
对于其它深腔类塑件的注射模具设计有一定的参考意义。
lib.cqvip.com
8.
The multi-cavity hot-runner injection mould for the Swiss customer.
为瑞士客户制造的多型腔热流道模具。
www.yahong-mould.com
9.
to examine whether injection mould thimble dovetail with top stick.
检查模具的顶针是否与注塑机顶棍相吻合；
www.lifengsuye.com
10.
The structure of the injection mould, the design plan of the gate and the working course of the mould are introduced.
介绍了注射模结构，浇口设计方案和模具工作过程。
www.chemyq.com
1.
The especial structure of the injection mould is also introduced in detail next, i. e. two-time ejection mechanism.
接着详细介绍了其特殊的模具结构即推出的脱模装置。
www.showxiu.com
2.
This thesis deals with the design of injection mould of plastic.
论述塑料制品的注塑模设计。
www.chemyq.com
3.
This paper analyzes the importance of the plastic injection mould structure CAD and some existing problems in this domain.
文章首先对注塑模结构CAD的重要性及尚存在的问题进行分析。
www.chemyq.com
4.
In addition, the process of designing injection mould by IMOLD is illustrated with a turntable mould example.
并通过设计转盘实例详细讲解IMOLD设计注塑模的一般流程。
www.dictall.com
5.
The structure of the injection mould for the valve tee was introduced.
介绍了阀体三通管注射模的结构。
www.chemyq.com
6.
By using the principle of reliability design, the withdrwal core mechanism with bevel lead column in plastic injection mould is analyzed.
运用可靠性设计原理，对塑料注射模常用的斜导柱式抽芯机构进行分析。
www.chemyq.com
7.
Such as auto parts mould , plastic commodity mould, plastic washing machine mould, air-conditioner mould, plastic TV injection mould.
如汽车零部件模具，塑胶商品模具，塑胶模具洗衣机，空调器模具，塑胶注塑模具电视。
dict.kekenet.com
8.
A 3D flowing simulation software HSCAE3D6. 0 was applied to optimizing the pouring system of positioned panel injection-mould.
应用三维流动模拟软件HSCAE3D60对冰箱定位板注塑模的浇注系统进行优化。
www.chemyq.com
9.
The way how to design and manufacture injection mould are introduced from the view of appearance requirement.
笔者主要阐述从满足产品外观要求的角度，分析如何对注塑模进行设计与制造。
lib.cqvip.com
10.
Can make complete 3D injection mould design by UG, know HASCO standard, and can inspect mould design from mould supplier.
能够用UG做全3D注塑模具设计，懂HASCO标准，可以审查模具供应商的模具设计图。
www.sndhr.com
1.
Design of the Multi-Cavity Injection Mould for the Front Rubber Support of the Engine
发动机前支承橡胶多腔注射模设计
ilib.cn
2.
New Concept of Advanced Manufacture Technology-Oriented Injection Mould Design and Manufacturing
面向先进制造技术的注塑模具设计与制造新理念
ilib.cn
3.
Design of the Injection Mould for the Front Shell of Electric Fan
美的风扇前壳注射模设计与研究
ilib.cn
4.
The main products of the company: injection mould(automobile category, cellphone category and so on)
公司主要产品：注塑模具（汽车部品类，手机部品类等）
zhidao.baidu.com
5.
The numerical simulation of the steady temperature fields in a cavity die of the injection mould in the cooling processing
注塑模凹模冷却过程稳态温度场数值模拟
www.ilib.cn
6.
Design of the injection mould for the long pole of dropping bottle
点滴瓶长杆注射模具设计
service.ilib.cn
7.
Improvement Design of Demoulding Failure of the Side Slider in Injection Mould
注塑模侧滑块脱模不良的改进设计
ilib.cn
8.
Design of the Injection Mould for the Body of Dropping Bottle
点滴瓶瓶体注射模设计
scholar.ilib.cn
9.
Research on the System for Automatic Generation of Injection Mould Base Assembly Body Graphics
注射模标准模架装配体图形自动生成系统的研究
ilib.cn
10.
Vibration Stress Relief Processing and Its Application on the Frame of Precision Injection Mould Machine
振动时效工艺在注塑机机架上的实践
ilib.cn
1.
Design of the Multi-Layer and Multi-Cavity Injection Mould with an Ordinary Feeding System
普通浇注系统多层多腔注射模设计
ilib.cn
2.
Design of the Hot-Runner Injection Mould for the Shell of Two-Color Electric Appliance
双色电器外壳热流道注射模设计
scholar.ilib.cn
3.
Processing of the Copper Electrode on the CNC Carving Machine for the Core of the Injection Mould for Mobile Phone Shells
在电脑雕刻机上加工手机外壳注射模型芯铜电极
ilib.cn
4.
The Optimized-control Technique of Valve-injection System and Its Application in Injection Mould
阀式浇注系统优化控制技术在注塑模中的应用
www.ilib.cn
5.
3 Years of relevant experience in designing plastic injection mould
有3年设计塑料模具的相关工作经验
abroad.163.com
6.
Design of the Injection Mould of a Four-sides Core-pulling Production
一个四面抽芯制件的注射模设计
scholar.ilib.cn
7.
Conduct technical and design plastic injection mould for manufacturing discussion with customers
按照客户要求进行塑料模具设计
abroad.163.com
8.
Design and Manufacture of the Gas-Assisted Injection Mould for the Refrigerator Handle
冰箱手柄气体辅助注射模设计与制造
www.ilib.cn
9.
Design of Injection Mould with a Turning Mechanism for Demoulding
带转动脱模机构的注射模设计
ilib.cn
10.
Design of injection mould with intelligent temperature control for experimental teaching
实验教学型智能温控注射模设计
ilib.cn
1.
The Processing Technology for the Bicycle Flywheel and Design of the Injection Mould
自行车飞轮成型工艺及注射模设计
ilib.cn
2.
Design of Injection Mould of Five Plates and Pushing Out Plastic Parts by Stripper Plate for Casing Cap of High Pressure Polyethylene
五板式推件板推件高压聚乙烯堵头注塑模设计
service.ilib.cn
3.
CAE-based calculating method for cavity geometric dimensions compensation of injection mould
基于CAE的注射模型腔尺寸补偿计算
www.ilib.cn
4.
Design of the Sequentially Opened Hot-Runner Stacked Injection Mould for Shallow Box-Shaped Parts
浅盒形件顺序开模热流道叠层式注射模设计
ilib.cn
5.
CE Theory and Its Application in the Design and Manufacture of Plastic Injection Mould
CE理论方法及其在注塑模具设计制造中的应用
www.ilib.cn
6.
Presentation of the Hydraulic Core-pulling Mechanism in Large-scale Injection Mould
大型注射模液压抽芯机构介绍
www.ilib.cn
7.
Design of the Injection Mould for Transmission Screws with Rectangular Threads
矩形螺纹传动螺杆注射模设计
ilib.cn
8.
Study on Opening Database System of Standard & General Parts of Injection Mould
注射模标准件通用件开放性数据库系统的研究
www.ilib.cn
9.
Application Present Status And Development Prospect of Mg Alloy Injection Mould Technology
镁合金注射成型工艺的应用现状及发展前景
service.ilib.cn
10.
Design of injection mould and numerical control simulation manufacturing for mobile phone shell
手机外壳注射模设计与数控仿真加工
ilib.cn
1.
Peculiarities in Electroforming of Reflex Reflector Injection Mould
定向反射镜芯模电铸中的特殊性
www.ilib.cn
2.
Application of computer aided manufacturing in injection mould processing
计算机辅助制造在注塑模具加工中的应用
www.ilib.cn
3.
Design of the Automatic-Thread-Removing Injection Mould for Accumulator Lids
蓄电池盖自动卸螺纹注射模设计
www.ilib.cn
4.
Cooling System Analysis of the Special Cooling Structures of Injection Mould
注塑模冷却分析中特殊冷却结构的处理
service.ilib.cn
5.
Design of the Injection Mould with a Turning Plate
带转动模板的注射模设计
www.ilib.cn
6.
Design of the Injection Mould for the Insulation Socket Connectors
绝缘接插件注射模设计
ilib.cn
7.
Calculation for the Design of the Temperature Control System of the Plastic Injection Mould
注射模温控系统的设计计算
ilib.cn
8.
Application of case-based reasoning in injection mould for determining manufacture time quota
基于事例推理的注塑模加工时间定额的确定方法
www.ilib.cn
9.
Application of concurrent engineering in the design and manufacture of plastic injection mould
并行工程在注塑模具设计制造中的应用
www.ilib.cn
10.
Research And Application of Paper Based Low-Pressure Reaction Injection Mould Technology
纸基反应式低压注塑模具技术研究与应用
service.ilib.cn
1.
Design of the Injection Mould for Automatically Forming the Drinking Bottle Base
底托自动成型注射模设计
www.ilib.cn
2.
A Practical Core-Pulling Mechanism of the Injection Mould for the Plane Four-Way Pipe
一种实用的平面四通管件注射模抽芯机构
scholar.ilib.cn
3.
Design of the Injection Mould for the Diffluence Valve of the Cold and Hot Water Machine
冷热饮水机分流阀注射模设计
service.ilib.cn
4.
Design of the Injection Mould for the Loudspeaker Covering Grate of Saloon Car
轿车扬声器护栅注射模设计
www.ilib.cn
5.
Design of the Injection Mould for the Connecting Part with Complex Profile
复杂外轮廓连接件注射模设计
ilib.cn
6.
Design of the Injection Mould for the Lower Carass of Saloon Car Warm Air Blower
轿车暖风机下壳体注射模设计
ilib.cn
7.
Design Calculation of Injection Mould Cavity for Precision Injection Moulding
精密注塑模型腔尺寸的设计计算
ilib.cn
8.
Analysis of forming technique and design of injection mould for large scale cancellate thin-wall plastic part
大型网格状薄壁塑件注射模设计及成型工艺分析
www.ilib.cn
9.
Design of the Injection Mould for the Inner Drum of the Automatic Washing Machine
全自动洗衣机内桶注射模设计
www.ilib.cn
10.
Design of injection mould with interconversion installation of moving half and fixed half for front cover
动定模反装的前盖注射模设计
ilib.cn
1.
Design of Hydraulic Pressure Core Pulling Mechanism for the Injection Mould of Three- way Pipe
顺水三通管注射模液压抽芯机构的设计
ilib.cn
2.
Preliminary Study of Designing Plastic Injection Mould the Based on the Characters of Plastic Parts
按塑件特点设计注塑模的初步研究
service.ilib.cn
3.
Structure design of contractile interior core-pulling injection mould for outer casing of flow-meter
流量计外壳收缩内抽芯注射模具结构设计
service.ilib.cn
4.
The Needle-Valve Nozzle and its Application in the Hot-Runner Injection Mould
针阀式喷嘴及其在热流道注射模中的应用
service.ilib.cn
5.
Design of the Injection Mould for the Top Cover of the Cleaner
吸尘器上盖注射模设计
ilib.cn
6.
The Setting of the Oil Cylinder for Straight Pulling the Core of the Injection Mould for Pipe Parts
管类件注射模直抽型芯的油缸设置
www.ilib.cn
7.
Application of CAXA ME in the NC Processing of the Injection Mould
在注塑模具型腔数控加工中的应用
service.ilib.cn
8.
Design of the Multiple bearing core pulling for Atomizer spray gun Injection mould
多方位抽芯的雾化器喷枪注射模设计
www.ilib.cn
9.
Design of the Injection Mould for the Lid of Atmospheric Pressure Bottle
气压瓶盖注射模具设计
www.ilib.cn
10.
Numerical Analysis Technology and Application in Injection Mould
数值分析技术及其在注塑模中的应用研究
ilib.cn
1.
Development of core-pulling mechanism in injection mould for plastic part with internal bidirectional back taper structure
内侧双向倒扣塑件注射模抽芯机构设计
www.ilib.cn
2.
Optimized design of slanted ejecting mechanism of injection mould for automobile wheel cap
汽车轮盖注射模斜顶机构优化设计
ilib.cn
3.
Forming Technology and Injection Mould Design for PP Spray Gun of Core Pulling at Three Dimensional System
三维系统抽芯的PP喷枪成型工艺及注射模具设计
www.ilib.cn
4.
Application of Case-Based Reasoning in the Injection Mould Intelligent Cost Estimation
基于事例推理的注塑模成本评估系统
service.ilib.cn
5.
The Location Forms of the Injection Mould Inserts for Forming the Round Pedestals
圆形基座注射模动定模镶件的定位方式
service.ilib.cn
6.
Design of the Typical Injection Mould of Automatic Thread Demoulding
典型自动脱螺纹注射模设计
ilib.cn
7.
Numerical simulation for packing process of injection mould and shrinking analyzing of plastic parts
注射模保压过程的数值模拟和塑件的收缩分析
ilib.cn
8.
Design of the Injection Mould for the Turning Cover of Mobile Telephone
手机翻盖注射模设计
ilib.cn
9.
Simple computational method for working dimensions of injection mould
注射模工作尺寸简单计算法研究
ilib.cn
10.
Design and Analysis of Injection Mould with Multi-direction Cores Drawing by Multi-detail of Plastics Box
多元多向抽芯塑料盒注射模具设计与分析
scholar.ilib.cn
1.
Design of two stage side core-pulling mechanism in injection mould
塑料注射模组合式二级侧抽芯机构设计
ilib.cn
2.
The Optimal Design of Angle Ejector of Injection Mould of The Calculator Lower Cover
计算器下盖注射模斜顶杆机构的优化设计
www.ilib.cn
3.
Ensure plastic injection mould design meet customer requirement
确保塑料模具符合客户要求
abroad.163.com
4.
Study of Offset in Circle-section Core of Injection Mould
注射模具中圆形截面型芯偏移的研究
www.ilib.cn
5.
Study on Theoretical Calculation and Cross-section Design of Flowing Path for Injection Mould
注塑模流道的理论计算和交互设计
ilib.cn
6.
Design and Procedure of the Injection Mould for Handing Air-condition Face-plate
柜式空调器面板注射模设计方法与程序
service.ilib.cn
7.
Design of injection mould for a part with internal concave
带内侧凹塑件注射模设计
ilib.cn
8.
Design of the Injection Mould for the Biomaterial Setscrew
生物材料固定螺钉注射模设计
ilib.cn
9.
Application of UG-based associated technology in design of injection mould forming parts
基于UG的关联技术在注射模成型零部件设计中的应用
ilib.cn
10.
Design and Manufacture of the Injection Mould for the Cooling Fans
风扇注射模设计与制造
www.ilib.cn
1.
Automatic recognition of undercut features in injection mould design
注塑模设计中侧凹特征的自动识别
www.ilib.cn
2.
Components of injection mould FOR plastics -- Guide pillars with shoulder
塑料注射模具零件有肩导柱
dict.ebigear.com
3.
Design of the Injection Mould for the Tray for Carrying Voltage Parts
电压元件托盘注射模设计
ilib.cn
4.
Injection mould for plastic - Specifications for medium size and small size mould bases
塑料注射模中小型模架技术条件
blog.globalimporter.net
5.
performing injection molding on the chip base and the lead frame by using a first injection mould and insulation adhesive;
采用第一注塑模具和绝缘胶对所述芯片基座和引线框架实施注塑；
ip.com
6.
Design of the Injection Mould for the Transparent Plastic Box Lid
透明塑料盒盖注射模设计
ilib.cn
7.
Design of the Injection Mould for the bracket of the Inner Jack of the Color TV Set
彩电内插座支架注射成型模设计
ilib.cn
8.
Fuzzy Decision of the Injection Mould Structure for Quotation
报价用注射模结构的模糊决策
service.ilib.cn
9.
Design of Injection Mould for Nether Decoration Lid of Automobile Inner Decoration
汽车内饰件下装饰盖注塑模具设计
www.ilib.cn
10.
Design of bidirectional stripping injection mould for control panel
基于双向脱模机构的控制面板注射模设计
www.ilib.cn
1.
Current Design Thoughts Based Cooperative Design of Injection Mould
基于并行设计思想的注塑模协同设计
www.ilib.cn
2.
Design of the Precision Injection Mould for the Pedestal
底座精密注射模设计
www.ilib.cn
3.
Design of the Injection Mould of Slanted-Slot-Type Inside Core-Pulling in the Fixed Half
斜槽式定模内侧抽芯注射模设计
ilib.cn
4.
Design and Manufacture of the Injection Mould for Plastic Duplex Gear
双联塑料齿轮注射模设计制造
service.ilib.cn
5.
Design of the Half-Type Injection Mould with Inner Core Pulling Structure
哈夫式内抽芯注射模设计
ilib.cn
6.
Study on the Viscosity Models of the Flowing Melt Plastics in the Injection Mould
注射成型中塑料熔体充填流动的粘度模型研究
www.ilib.cn
7.
Design of the Automatic Injection Mould for Bicolor Plastics
全自动双色注射模设计
www.ilib.cn
8.
Improvement in the Structure of the Injection Mould for the Souvenir Badge and Study on the Injection Process
纪念章模具结构改进及注射工艺研究
www.ilib.cn
9.
Injection mould for plastic large-size mould bases - Specification
塑料注射模大型模架技术条件
www.zftrans.com
10.
Developing the CBR-method-oriented injection mould knowledge based
基于CBR的注塑模结构知识库的研究与开发
ilib.cn
1.
Computer Simulation of Working Course of Injection Mould with Two Joint-surfaces
双分型面注射模工作过程的计算机模拟
www.ilib.cn
2.
The Design of Plastic Injection Mould for a Special Cap
一种专用瓶盖的注塑模设计
ilib.cn
3.
Design of the Injection Mould for the Shell Body of the Coffee Machine
咖啡机外壳注射模设计
www.ilib.cn
4.
Building of the Knowledge Base System for Injection Mould Design
注射模知识库系统的构建
www.ilib.cn
5.
Design of the Injection Mould for the Shells of Camera Switches
照相机开关外壳注射模设计
www.ilib.cn
6.
Injection mould for plastic large-size mould bases - Guide pillars with shoulder
塑料注射模大型模架有肩导柱
www.zftrans.com
7.
Design of the Injection Mould for the Accumulator Tanks
蓄电池槽注射模设计
service.ilib.cn
8.
Design of the Powder Injection Mould for the Magnetic Frame
磁框粉末注射成型模设计
www.ilib.cn
9.
The Application of UG Redevelopment in the Standard Mould Base Library of Injection Mould CAD
UG二次开发在塑料注射模标准模架库CAD中的应用
ilib.cn
10.
Flow Study in Injection Mould Running System for the Polymer Melting Fluid
聚合物熔体在模具浇注系统流道中的流动研究
service.ilib.cn
1.
Selection of Outer Lubricants for the Injection-mould Material of Soft PVC
软聚氯乙烯注塑料外润滑剂选择研究
service.ilib.cn
2.
Design of the Injection Mould for the Pedestal of the Electric Pan
电热锅底座注射模设计
service.ilib.cn
3.
components of injection mould for plastics . universal sprue bush
塑料注射模零件.通用浇口套
www.ichacha.net
4.
Design of the Injection Mould for the Deep-Cavity Plastic Part
深腔塑件的注射模设计
ilib.cn
5.
Design and Analysis of the Injection Mould for the Protect Cap
保护盖注射模设计与工艺研究
www.ilib.cn
6.
CAE analysis and design of injection mould for thermoset plastic loop framework
热固性塑料线圈骨架注射模设计与CAE分析
ilib.cn
7.
Design of the Turning Injection Mould for Deep-Cavity Plastic Parts
转动式深腔塑件注射模设计
ilib.cn
8.
Design of the Injection Mould for the Flaring Pipe Sleeves
扩口管套注射模设计
ilib.cn
9.
Discussion of the Size and Deviation of Injection Mould
注射模型腔尺寸和公差的确定方法探讨
www.ilib.cn
10.
Optimization of injection mould gate location for cash register face cover
税控收银机外壳的浇口位置优化
ilib.cn
1.
Injection mould for plastic large-size mould bases - Straight guide bushes
塑料注射模大型模架直导套
www.zftrans.com
2.
components of injection mould for plastics . ejector sleeve
塑料注射模零件.拉料套
www.ichacha.net
3.
Components of injection mould FOR plastics--Support pillars
塑料注射模具零件支承柱
dict.ebigear.com
4.
Integrated application of CAE technology in design of injection mould
注射模设计中CAE技术的综合应用
ilib.cn
5.
Application of Reverse Engineering in Fan Injection Mould Design
反向工程在风扇注塑模具设计中的应用
service.ilib.cn
6.
Fuzzy Predictive Control of Stove Temperature of Injection Mould
注塑机炉温的模糊预测控制
ilib.cn
7.
Injection mould parting line and sizing spacing parting sequence
注射模的分型面及其顺序定距分型
service.ilib.cn
8.
Design and Application of Pneumatic Aided Stripper Plate of CD Injection Mould
光盘注塑模具气动辅助脱模机构的设计与应用
www.ilib.cn
9.
Injection mould for plastic large-size mould bases - Guide pins for ejector plater
塑料注射模大型模架推板导柱
www.zftrans.com
10.
Application and Design of the Stacked Injection Mould
叠层注射模的应用与设计
ilib.cn
1.
Application of failure mode effects analysis in design of injection mould
失效模式及后果分析在注射模设计中的应用
ilib.cn
2.
Injection mould for plastic large-size mould bases - Standard mould bases
塑料注射模大型模架标准模架
www.zftrans.com
3.
Application of Ejecting Manner of Ejector Inlaid-block in Injection Mould
顶块顶件方式在注射模中的应用研究
www.ilib.cn
4.
Design of Injection Mould for External Barrel of Tumbling Washing Machine
滚筒洗衣机外桶大型注射模设计
ilib.cn
5.
Design of the Injection Mould for the Rubber Pedestal
橡胶支座注射模设计
www.ilib.cn
6.
Design of the Injection Mould for the Plastic Conduit
导管塑件注射模设计
www.ilib.cn
7.
Research on PDM system for medium and small-sized injection mould enterprises
面向中小型注塑模具企业的PDM系统研究
ilib.cn
8.
A top notch plastic mould designer with good design skills and knowledge of plastic injection mould fabrication process
一流设计师需要有良好的设计技术并了解注塑和模具制造过程
abroad.163.com
9.
components of injection mould for plastics . guide bushes for spacer
塑料注射模零件.垫板导套
www.ichacha.net
10.
injection mould for plastic large - size mould bases - spacer plates
塑料注射模大型模架垫块
www.ichacha.net
1.
components of injection mould for plastics . locating ring
塑料注射模零件.定位圈
www.ichacha.net
2.
components of injection mould for plastics - spacer blocks
塑料注射模具零件垫块
www.ichacha.net
3.
components of injection mould for plastics . gating insert
塑料注射模零件.浇口套
www.ichacha.net
4.
Minimum Volume Optimization of Injection Mould Feed System
注射模浇注系统的最小体积优化
www.ilib.cn
5.
Plastic injection mould of separate frame for refrigerator
冰箱小隔架注塑模具
www.hongdamould.com.cn
6.
injection mould; model frame; model core; standard sample;
互换性；注射模；模框；模芯；标准试样；
dictsearch.appspot.com
7.
components of injection mould for plastics . tube fittings
塑料注射模零件.管接头
www.ichacha.net
8.
Design of the Precision Hot Runner Injection Mould for Coil Frame
线圈骨架热流道精密注射模设计
ilib.cn
9.
Using the Genetic Algorithm to Facilitate Case-adaptation of Injection Mould Cost Estimation CBR System
基于遗传算法的事例改写策略在注塑模成本评估CBR系统中的应用研究
ilib.cn
10.
Design of the Double-Layer Injection Mould for Picture Frames
框板套双层注射模设计
ilib.cn
1.
Research on Flowchart Simulation of Filling Process of Plastic Melt in Injection Mould
注塑模塑料熔体填充过程的流程图模拟研究
service.ilib.cn
2.
Design of the Injection Mould for the Mesh Textile Tubes
网眼络纱管注射模设计
scholar.ilib.cn
3.
Research on Concurrent Design of the Injection Mould
注射模并行设计的研究
www.ilib.cn
4.
Design of the Injection Mould for the Connectors
连接器注射模设计
scholar.ilib.cn
5.
Design of the Injection Mould for the Magnifiers
放大镜注射模设计
www.ilib.cn
6.
Design of the Injection Mould for the Measuring Head
检测头注射模设计
scholar.ilib.cn
7.
Injection mould for plastic large-size mould bases - Guide pillars with head
塑料注射模大型模架带头导柱
www.zftrans.com
8.
Development of the internal core-pulling mechanism for injection Mould
注射模内抽芯机构的研制
ilib.cn
9.
Injection mould for plastic large-size mould bases - Support plates
塑料注射模大型模架支承板
www.zftrans.com
10.
Application of CAE Technology to Injection Mould for Digital Camera
CAE技术在数码相机注塑模中的应用
service.ilib.cn
1.
Injection mould for plastic large-size mould bases - Ejector plates
塑料注射模大型模架推板
www.zftrans.com
2.
Design of Injection Mould for Doorknob of Refrigerator with Neutron
带中子机构的冰箱门体堵盖的注射模具设计
www.ilib.cn
3.
An injection mould for forming precision needle roller bearing cage
精密滚针轴承保持架注射模设计
service.ilib.cn
4.
Design of Injection Mould with Multiple Radial Core-Pulling Devices
多型芯径向抽芯注塑模设计
www.ilib.cn
5.
Research of development for gate type selection expert system of plastic injection mould
注塑模具浇口类型选择专家系统开发研究
www.ilib.cn
6.
Improvement in the Swing Pin Mechanism of the Injection Mould
注射模摆杆机构的改进
www.ilib.cn
7.
design of the injection mould for ic card telephone receiver
卡电话机听筒注射模设计
www.ichacha.net
8.
Designing of Injection Mould of The above Shell of Telephone
电话机外壳上盖注射模的设计
www.ilib.cn
9.
components of injection mould for plastics - ejector pins
塑料注射模具零件推杆
www.ichacha.net
10.
Design of plastic injection mould for kitchenware fitting
厨具塑料配件注塑模设计
ilib.cn
1.
components of injection mould for plastics . sprue puller
塑料注射模零件.拉料杆
www.ichacha.net
2.
components of injection mould for plastics . puller plate
塑料注射模零件.定距板
www.ichacha.net
3.
Design of forced demoulding mechanism for injection mould
注射模强制脱模机构设计
ilib.cn
4.
Optimization of cavity rigidity of large-scale injection mould
大型注射模型腔刚度优化分析
ilib.cn
5.
The Manufacturing Process for Core Thread of Bottle Cap Injection Mould
瓶盖注射模螺纹型芯的螺纹制造工艺
www.ilib.cn
6.
Research of fast reloading technology of hot runner for injection mould
注射模热流道快速换料工艺研究
ilib.cn
7.
Injection Mould Designing of Connection Socket
接插座注塑模具设计
www.ilib.cn
8.
Injection mould for plastic large-size mould bases - Guide bushes with head
塑料注射模大型模架推板导套
www.zftrans.com
9.
Application of CAE technology in design of injection mould for optical lens
CAE技术在光学透镜注射模设计中的应用
www.ilib.cn
10.
Design of the injection mould for frame of cam on master controller
司机控制器凸轮架注塑模设计
www.ilib.cn
1.
Design of the Injection Mould for the Sealing Cover
封盖注射模设计
ilib.cn
2.
Design of the Injection Mould for the Handle of the Glass Cup
玻璃杯手柄注射模设计
beta.ilib.cn
3.
The calculation of injecting force for hot channel injection mould
热流道注射模中充模力的计算
www.ilib.cn
4.
A New-Typed Compound Core-Pulling Mechanism for the Injection Mould
一种新型的复合抽芯机构
ilib.cn
5.
Research on Injection Mould for Cooling Grid of Air-condition Used in Cars Based on MoldFlow
基于MoldFlow的轿车内空调冷栅塑件注塑模的研究
www.ilib.cn
6.
Optimized Design of the Injection Mould for Three-way Union
塑料三通接头注射模的优化设计
ilib.cn
7.
Design of the Injection Mould for Tee Coupling Plastic Part
三通塑件注射模设计
ilib.cn
8.
Design of the Injection Mould for Mineral-Water Bottle Lids
矿泉水瓶盖注射模设计
ilib.cn
9.
components of injection mould for plastics . spacer
塑料注射模零件.垫块
www.ichacha.net
10.
Application of CAE Technology in the Injection Mould for Digital Camera
CAE技术在数码相机注塑模设计中的应用
www.ilib.cn
1.
Overview of Flow Simulation Technology in Injection Mould CAE
注射模CAE流动模拟技术综述
www.ilib.cn
2.
Design of Injection Mould of Automatic Separating for Threads
螺纹自动脱模的注塑模设计
www.ilib.cn
3.
Design of the Injection Mould for the Crookedly Wire-Pulling Brackets
弯曲拉线支架注射模设计
ilib.cn
4.
Design of Injection Mould for Alarm Annunciator Pedestal
报警器底座注射模设计
service.ilib.cn
5.
Key points in the Design of the Injection Mould for Mobile Phone LCD Lens
手机显示屏镜片注射模设计要点
www.ilib.cn
6.
Design of the Injection Mould for the Bevel Wheels
斜齿轮注射模设计
ilib.cn
7.
full-automatic type in-line screw plastic injection mould machine
全自动螺旋直射式注塑机
www.zftrans.com
8.
Injection mould for plastic large-size mould bases - Mould plates
塑料注射模大型模架模板
www.zftrans.com
9.
Design of the Injection Mould for the Car's Rearview Mirror Cover
轿车后视镜外罩注射模设计
ilib.cn
10.
Application of ODBC to the Secondary Development of Injection Mould Filling System
ODBC应用于注塑模浇注系统的二次开发
ilib.cn
1.
Design of new-type transplanted seeding trayfor rice bowl and the injection mould for seeding tray
新型水稻钵体摆栽秧盘及秧盘注塑模具的设计
www.ilib.cn
2.
Specification of injection mould for plastics
塑料注射模技术条件
blog.globalimporter.net
3.
Design of the Injection Mould for the Brackets
支架注射模设计
ilib.cn
4.
Design and analysis of the injection mould for shampoo lid
洗发水瓶盖注射模设计和工艺分析
www.ilib.cn
5.
Design of Injection Mould for the Linker with Steering Angle
转向连接器注射模设计
www.ilib.cn
6.
Design of Multi- direction Side Core Loosing Injection Mould
一种多向侧抽芯注射模设计
ilib.cn
7.
Design of injection mould for slicing insulating cover plate
限幅绝缘盖板注射模设计
ilib.cn
8.
Demoulding Mechanism Design to Injection Mould of Bevel-Gear
斜齿轮塑件注射模的脱模机构设计
ilib.cn
9.
Development and Application of Injection Mould CAD
注塑模具计算机辅助设计的发展与应用
www.ilib.cn
10.
Application of CAE Technology in Injection Mould Design
CAE技术在注射模设计中的应用
service.ilib.cn
随便看

　

英汉双解词典包含2704715条英汉词条，基本涵盖了全部常用单词的翻译及用法，是英语学习的有利工具。

　

Copyright © 2004-2022 Newdu.com All Rights Reserved
更新时间：2025/2/27 19:56:28