intergranular

The result shows that it was the typical intergranular fracture, and there were scrappy claw and tiny pore in the fracture of crystal face.

For intergranular materials, poorly to moderately well cemented, the total porosity is approximately equal to the effective porosity.

Breakage mechanism of these pipes is tipping corrosion, accompanied with intergranular corrosion and stress corrosion cracking.

The corrosion types of the cast and extruded alloys are pitting corrosion and filiform corrosion as well as intergranular corrosion.

EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, METALLOGRAPHY, FILLET WELD AND WELD CHEMICAL COMPOSITIONS. . . . . .

And the intergranular morphology, the polygonal morphology and the fan-shaped cleavage morphology are the main fracture morphologies.

Detections of susceptibility to intergranular corrosion in stainless steel and nickel alloy pressure vessels are always gone on before now.

Failure pattern of transgranular fracture and intergranular fracture depends on the intension of crystal.

The research finds that pores can be divided into three types: crude residual intergranular pore, induced pore and mixed pore.

The wall of the pipes is becoming thinner and thinner as intergranular corrosion occurred under the incrustation.

Intergranular fracture. Fracture of polycrystalline materials by crack propagation along grain boundaries.

Intergranular stress corrosion cracking behavior of austenitic steels on hydrogenated high-temperature.

The quench sensitivity relative to intergranular corrosion increased with the increase of rolling deformation.

The types of the pore are mainly secondary solution pores and seldom primary remanent intergranular pores.

Effects of hydrogen peroxide on intergranular stress corrosion cracking of stainless steel. in high temperature water, .

Original porosity is typified by the intergranular porosity of sandstones and the intercrystalline and politic porosity of some limestones.

Pore types are mainly intergranular pore, throat types are mainly point, plates and curved sheet throat, general pore connectivity.

At the lower temperatures, intergranular thermal cracking is the main thermal cracking for Beishan granite.

The results showed that the decrease of quench rate reduced the resistance to intergranular corrosion.

The corrosion behavior of 2D12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.

Fracture mode is predominantly ductile in base metal. However, there exists intergranular fracture in the weld metal.

Mitigation effect of alkaline water chemistry upon intergranular stress corrosion cracking of sensitized 304 stainless steel.

The pore space consists of intergranular dissolved pore, intragranular dissolved pore, moldic pore and fracture.

In addition, the steel had also better intergranular corrosion resistance after sensibilisation treatment.

The fracture mode of the alloy in T6 state is transgranular shearing and intergranular dimple mixed fracture.

The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.

The reservior space are mainly intergranular apricot kernel inner pore and dissolved pore.

There is mainly intergranular corrosion with different extent on Cu-Ni alloys in marine.

Primary exp anded intergranular pore is the most dominant in the pore types, and they derived from solution of feldspar and cutting.

A Study of Grain Boundary Segregation and Intergranular Embrittlement Fracture

Grain boundary engineering for intergranular corrosion resistant austenitic stainless steel

Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys

Standard Test Methods of Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

original porosity is typified by the intergranular porosity of sandstones and the intercrystalline and oolitic porosity of some limestones

Intergranular Corrosion Cracks of Austenite Stainless Steel Containing Silicon

the main reservoir was intergranular pores and intragranular dissolved pores;

Nickel-based alloys - Determination of resistance to intergranular corrosion

Control of the stainless steel weld joint intergranular corrosion property

Effect of Trace of Boron on Grain Boundary Segregation of Sulfur and Sulfur-Induced Intergranular Fracture in High Purity Iron with Sulfur

Intergranular Corrosion of Austenitic Stainless Steel

Effects of Holding Time on Intergranular Phase and Mechanical Property of GPS Silicon Nitride Ceramics

Test and analysis of intergranular corrosion for stainless steel surfacing strip

Intergranular Corrosion of Stainless Steel in Non-aqueous Environment

Experimental study on intergranular stress corrosion of stainless steelused in glycol evaporators

The method for determining the intergranular corrosion of aluminium alloy

Development of Stainless Steel Intergranular Corrosion Detector

Effect of intergranular phase on the anisotropy of nanometer hard magnetic materials

Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

Effect of Heat Treatment on Microstructure, Tensile Strength and Intergranular Corrosion of 2519 Aluminum Alloy

A 262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A

Influence of quench rate and zirconium content on intergranular corrosion of 7055 type aluminum alloy

steel free from intergranular corrosion

Inversed magnetoresistance effects in the H-A model for intergranular tunneling

Effect of Aging Process on the Intergranular Corrosion of 2519 Aluminium Alloy

Rapid Detection of Intergranular Corrosion on 18-8 Stainless Steel