hardened steel

He made his deposit, he says, after inspecting the bunker's hardened-steel doors, which are strong enough to repel a tank blast.

A sample slug, part, or section of a carbonized, or hardened steel used for testing to determine structure, hardness, case depth, etc.

Also the hardened steel of the shaft pulling onto the mild steel of the frame is going to be a weak point.

The third part, the quill, is a hardened steel tube, which can be moved longitudinally in and out of the intermediate part as required.

In both, the hardened steel is quenched in a salt bath held at a selected lower temperature before being allowed to cool.

actuator head with a hardened steel shaft in a bronze bearing is mated to a solid aluminum valve body.

The final structure obtained from tempering a fully hardened steel is called tempered martensite.

Tempering is possible because of the instability of the martensite, the principal constituent of hardened steel.

The tip of the screw driver has been made of hardened steel which has been ground to provide a long life and a precise carburettor set-up.

Any of several hardened steel tools with cutting ridges for forming, smoothing, or reducing especially metallic surfaces.

specially hardened steel plate used to protect fortifications or vehicles from enemy fire.

This process is extremely useful, therefore, in tool making, since hardened steel and carbides can be machined with easy.

Hardened steel contains high carbon content which reacts with the diamond and thus causes serious wear of the diamond tool.

Guide Shafts: Hardened Steel, (stainless available), large diameters for increased load capability.

This was a piece of German-hardened steel.

It has wide application rage from common material treatment to process hardened steel.

Material selection generally hardened steel worm, worm commonly used wear-resistant copper alloy material.

Lock washers are generally made of hardened steel.

For hardened steel, alloy steel, high speed steel, high carbon steel, etc. Also for thread and gear grinding and thin walled workpieces.

Progressive metal stamping mould forging weld-repair after quench hardened steel mold materials etc.

cold - hardened steel by welding from using quality , high - strength , large loading capacity.

They made a material that is extremely light, yet tougher than hardened steel and, of course, it's transparent!

Parallel pins with internal thread, of hardened steel and martensitic stainless steel.

The group have also used their machine to punch holes in hardened steel, including stainless steel.

The operation consists of reheating quench-hardened steel to some temperature below the critical range followed by any rate of cooling.

German hollow-ground hardened steel, high carbon chrome-plated blade.

Excellent performance on high hardened steel.

Hardened steel is difficult to machine, but having been annealed, it can be easily machined.

The trunnion journal (22) is made by cutting hardened steel with using no cutting fluid.

TEMPER : Process of re-heating hardened steel to a temperature below critical temperature followed by a desired rate of cooling;

Ultra-high speed milling and its application in machining of high hardened steel

Study of Hardened Steel Milling with Micro-Ball-End-Milling Cutter

metallographic examination of induction hardened steel parts

Study on Processing Property and Economical Efficiency for High-Speed Machining of Hardened Steel

The Mechanism Study of High Speed Milling of Hardened Steel

Standard Specification for Hardened Steel Washers [Metric]

Parallel pins with internal thread, of hardened steel or martensitic stainless steel

Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)

Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)

Generation of Surface Micro-topography in High Speed Dry Turning Hardened Steel

A Method of Displaying Austenitic Crystallite-Boundary of Hardened Steel

Experiment and Simulation of High Speed Turning Process for Hardened Steel

The Experimental Study on High Speed Dry Turning Hardened Steel by Ceramic Cutter

Selecting the turning tool and cutting parameter for hardened steel

Research on surface integrity of finishing hardened steel

Experimental Study on Surface Roughness of HSM Hardened Steel

Case hardened steel spur gear train is permanently lubricated

The Experimental Research on Grinding of 45 Hardened Steel with Home Made Vitrified Bond CBN Grinding Wheels

Surface Quality and Tool Design for Hardened Steel Finishing

Tool for Hardened Steel Cutting and Tool Parameter Selection

Cutter Path Strategies in High Speed Rough Milling of Hardened Steel

The application of milling hardened-steel surface

The Experimental Study on High Speed Dry Turning Hardened Steel

High-speed and high-precision hard machining of hardened steel

Experimental research on grinding of 45 hardened steel with CBN and alumina grinding wheel

Cutting tools design for cutting hardened steel

Constant Chip Load in High-speed Machining of Hardened Steel

Turning the Hardened Steel Workpiece with PCBN

Study on Shock Resistance of Baking Hardened Steel

Inner and outer rings and rollers of case-hardened steel

A Study on Electric Hot Machining for Hardened Steel

core properties of case hardened steel

High-speed Machining of Hardened Steel

Numerical Control Machining Technology of Hardened Steel Based on HSM

High Speed Milling for Hardened Steel

Research on Grinding of 45 Hardened Steel with CBN Grinding Wheel

Precisely Cutting in place of Grinding of 45 Hardened Steel

Study on Finishing 45 Hardened Steel by CNC Lathe