heat exchangers

Under restricted air inlet condition, the inlet angle has no influence on the air side performances of heat exchangers basically.

Coiled tubular heat exchangers (HE) are popular in various fields of engineering, highly reliable, and easy to make.

A staggered cylindrical array represents a major structural form of heat exchangers for a solar energy based thermal power station.

The heat exchangers with pin finned tube have been simulated by means of FLUENT.

The ultrasonic soldering process of aluminium heat exchangers and a few important factors effecting on the soldering are reviewed.

The heat exchange chamber can be replaced by a plurality of stacked heat exchangers with heat storage function.

These units, like most heat exchangers, can use one of a variety of types of finned tube construction.

Among the NDT methods used to inspect heat exchangers' flaws and crack, there are PT UT Eddy current test and laparoscope inspection.

They were developed as heat exchangers in electrical transformers, and were widely used in plastics and paper manufacturing.

With the rapid development of chemical industry, a larger number of heat exchangers are unable to meet the needs.

All-welded stainless steel CFXTM heat exchangers can be used in many applications where copper or other metals are not suitable.

Puts forward the technique of flushing the heat exchanger bundles alternately with high head water for shell-and-tube heat exchangers.

Heat exchanger is in the industrial production process of heat transfer between the material in a device, it is also called heat exchangers.

Equipment scope includes compressors, pumps, chillers , heat exchangers, cooling towers, pressure vessels, boilers, vaporizers for Projects.

The heat exchangers (cooler) in the units shall be designed such that they are easily to access and to clean, if possible.

To this day there is still ongoing controversy about whether to expand first or weld first the tube to tube-sheet joint in heat exchangers.

Water is pumped through the heat exchangers to pick up the heat that was stored during summer.

Two aluminizing tubular heat exchangers with this method are long term usage in a sulphuric enterprise without any trouble.

Heat exchangers - Liquid cooled refrigerant condensers - Test procedures for establishing the performance.

The plate-shell heat exchangers are a new kind of heat exchangers with high efficient, compact, corrosion-free and lower cost.

Heat exchangers - Refrigerant cooled liquid coolers - Test procedure for establishing the performance.

However, the energy required to power these fans almost equates to that saved by using heat exchangers, so negating the benefits.

More differences in temperature and heat exchange loads are the primary reasons of exergy loss in heat exchangers.

The plants comprise pipe or plate heat exchangers with a defined heat retention section.

Heat exchangers - Test procedure for establishing the performance of forced convection unit air coolers for refrigeration.

HEAT EXCHANGERS. VERIFICATION METHODS FOR THERMODYNAMIC PERFORMANCE OF POWER PLANT CONDENSERS.

Our air-cooled heat exchangers are considered state-of-the-art equipment by many users.

This paper introduces the intensive measures for convective heat transfer under no-phase transformation on tubular heat exchangers.

Heat exchangers - Water to water heat exchangers for district heating - test procedures for establishing the performance data.

The fouling of sewage heat exchangers is the main factor that impacts the application of sewage cooling and heating source.

One of the most common types of extended surface heat exchangers.

Influence of exchangers is presented , which can provide some references for improving and optimizing shell and tube heat exchangers.

Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance.

The experiment results obtained can be used as the basis for adopting or designing new tube fin heat exchangers.

Gas hydrates from in and block gas wells and lines, and cause fouling of heat exchangers when the gas is cooled.

Chinese boffins have engineered air-conditioning units with (bulkier) aluminium heat exchangers.

Shell-and-tube heat exchangers are widely used in petrochemical industries.

According to the experiment data, looking for a new fit correlation for a plenty of plates heat exchangers.

From time to time, it becomes necessary to place shell and tube heat exchangers in service with the unit on stream.

Leaking heat exchangers or steam condensate piped into the main soak compartment.

The stress corrosions in welded plate heat exchangers are studied and associated preventive measures are suggested.

Knowing the formation magnesium of fouling is the basic requirement of application and research of sewage heat exchangers.

The fouling problem is the most serious for the shell - tube heat exchangers of low flowing velocity, whose number is the largest.

At present, little research about multiple well heat exchangers is done; and most studies are limited to single well heat exchanger.

For the boiling device in heat exchangers, the structure of the cone reducer on shells is adopted on the basis of new standards.

Scrap, Metals, Steel, Heat Exchangers, Aluminum, Copper, Computer Scrap Brass, Plastic.

Emphasizes the system design of ground heat exchangers.

Furthermore, the pressure drop in helical baffles heat exchangers gets down with the increase of helical angle.

Pinch analysis for heat exchangers network of Atmosphere-vacuum distillation for crude oil is implemented.

For specialized applications, compact heat exchangers are challenging shell-and-tube units.

The spacing and cut of baffle in shell-and-tube heat exchangers have significant impacts on the performance of heat exchangers.

Yanhua equipment factory in the understanding of heat exchangers and pressure vessels processing flow.

Plate heAT exchangers are ideal for pasteurization systems with these configurations.

Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2 : brazed aluminium plate-fin heat exchangers.

There will be 3 vertical cooling water pump set in circulation water pump workshop, with 3 cooling water heat-exchangers for the system.

If vessel is fitted with deepwell pumps and heat exchangers , can pumps and heat exchangers be by-passed during loading ?

Research of shell-and-tube heat exchangers mainly aims at enhancing heat transfer and lowering the pressure drop.

Heat exchangers within fluidized beds require relatively small surface areas.

Computation methods for designing selection of plate type heat exchangers were studied.

Frosting of finned tube heat exchangers is a complex process of heat and mass transfer under low temperature conditions.

Screw lock ring heat exchangers as main equipments are used in hydrogenation cracking plant which have many shortcomings.

The air then passes through heat exchangers where it is cooled to cryogenic temperature.

Plate heat exchangers are widely used in the beverage industry.

The test result shows that the unit could truly reflect the scale and corrosion of heat exchangers.

This steam is then collected for use in other heat exchangers or discharged to the condensate return line.

This paper summarizes the developing survey on the tube-bundle supports in the shell and tube heat exchangers.

These supply the theoretical basis for further study and application of swage heat exchangers.

Development of design criteria for fluid induced structural vibrations in steam generators and heat exchangers.

To make the process even more energy-efficient, heat exchangers catch waste heat and recycle that energy back into the reactor.

In this paper the authors focus to discuss the fluid elastic instability in tube arrays of heat exchangers.

Ground thermal conductivity is the key parameter in the design of borehole heat exchangers.

Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.

Petroleum and natural gas industries - Plate heat exchangers.

Hydraulic expanded joint technique for heat exchangers.

Petroleum and natural gas industries - Air-cooled heat exchangers.

Use in seawater, brackish water , condensers, heat exchangers and pipe work.

It also provided theoretical basis and reference for approximation of EHIDDiC by externally heat exchangers.

Today, copper is still used in Baelz heat exchangers, such as in the district heating network in Paris.

We also specialize in the manufacture of new and rebuilt heat exchangers.

One being tested at Victoria station pumps river water through heat exchangers.

This system can provide a tool of analysis, calculation and design for the fixed tubesheet heat exchangers.

Hitch by scaling and corrosion on most in use heat exchangers and it examine method in petrochemical produce are introduced.

This paper study the model on line monitoring fouling in tubular heat exchangers.

Copper and copper alloys. Seamless, round tubes for heat exchangers.

Model-based control and optimum operation of heat exchangers.

heat exchangers are standard components in the field of power engineering , and also other process industry.

TRANTER Heat Exchangers (Beijing) Co. , Ltd.

Special-purpose devices such as boilers, evaporators, superheaters, condensers, and coolers are all heat exchangers.

List the two basic types of air cooled heat exchangers.

About 100 metres down lies a natural aquifer into which a series of heat exchangers have been built.

List the two basic types of air cooled heat exchangers.

About 100 metres down lies a natural aquifer into which a series of heat exchangers have been built.

Strong mineral acids can cause damage when cleaning deposits in industrial equipment such as boilers, steam generators and heat exchangers.

For use when post-heat treatment is not conducted such as automobile exhaust pipes, heat exchangers and containers.

It is the sole manufacturer of brazed heat exchangers in Taiwan, and has sales in more than 60 countries.

We want to buy Heat Exchangers, Oil and Lubricants, Pressure Vessels, Pressure Vessels Oil Lubrication Consoles Heat Exchangers.

All coil heat exchangers have a regular arrangement of tubes.

We want to buy Scrap, Metals, Steel, Heat Exchangers, Aluminum, Copper, Computer Scrap Brass, Plastic.

We want to buy Hot Stamping, Indent Marking, Foils, Numbering Heads, Heat Transfer Heat Exchangers.

We want to buy Heat Exchangers, Bulk Flow Heat Exchanger, Plate Heat Exchanger Heat Exchangers.

We want to buy Heat Exchangers, Bulk Flow Heat Exchanger, Plate Heat Exchanger Heat Exchangers.

Alfa Laval AB, the world's biggest maker of heat exchangers, lost 5. 2 percent as sales in the third quarter missed analysts' estimates.

State the temperature differential that is important to air cooled heat exchangers.

We want to buy Heat Exchangers, Oil and Gas Field Equipment, Pipes and Pipe Fittings.

the reactors produces endothermic and exothermic reaction to cool or heat the air of the heat exchangers;

An experimental study of the air-side particulate fouling in fin-and-tube heat exchangers of air conditioners

Researches on the Heat Transfer Performance and Resistant Drop Characteristics of the Temp-Plate Heat Exchangers

Selection of the Heat Exchange Tube Material for Heat Exchangers Used in Heat Supply

Analysis of heat disturbance between the pipes of the U-tube geothermal heat exchangers

Experimental Study of Heat Transfer and Flow Resistance Characteristics for Shell-and-Tube Heat Exchangers with Continuous Helical Baffles

Comparison of Integrated Performances of Heat Exchangers with Curve-ROD Baffle and with Segmental Baffle

Cause Analysis of the Weld Flaw Between the Flanges and Internal Sleeves of the High Pressure Heat Exchangers and Countermeasures

Comparison Study of Thermal Performance of Plate Fin Type Heat Exchangers with Aligned and Staggered Arrangements

Influence of Uneven Flow Distribution on the Heat Transfer Performance of Plate Heat Exchangers

Effect of Velocity Distribution Asymmetry on the Heat Transfer Performance of Heat Exchangers

Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedure for establishing performance

Progress in Numerical Simulation Study of Fluid Flow and Heat Transfer in Shellside of Shell and Tube Heat Exchangers

Modal Study of Multiple Scattering Field on Tubes Surface in a Heat-Exchangers Row

Structure Optimization of Finned-Tube Lubricate Heat Exchangers Used in Helicopters

An analytical solution of the temperature response in geothermal heat exchangers with groundwater advection

Experimental Study of Distance Between Heat Exchangers for Cooling Module Match

Prolong the Service Life of Tubes of Heat Exchangers Using Clapboard Replacement Method

Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers)

Failure form of the bellows heat exchangers and the prevention methods

Investigation on the Anti-vibration for Shell-and-tube Heat Exchangers and a New Anti-vibration Structure System of them

Numerical Prediction and Analysis of the Dynamic Behavior of Heat Exchangers with Continuous Helical Shaped Baffles

Engineering Graphic Estimation of the Residual Contact Pressure of the Hydraulic Expanding Tubes of Heat Exchangers

Numerical Simulation of the Thermal Performance of the Indirect Evaporative Cooling Plate Heat Exchangers

Influence of Parameters on Airside Performance of Wavy Fin-and-tube Heat Exchangers with Hydrophilic Coating under Dehumidifying Conditions

A Theoretical Method for Analyzing the Effect of Vapor-liquid Heat Exchangers on the Performance of a Refrigerating System

Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance

Heat exchangers - Liquid-cooled refrigerant condensers - Test methods for establishing the performance

Cause Analysis of Leakage of Heat Exchangers on Top of Atmospheric Pressure Tower and Its Countermeasure

Flowing and heat transfer characteristics for three-dimensional steady flows of plate-fin tube heat exchangers with one row tube

Effects of the corrugated inclination angle on heat transfer and resistance performances of plate heat exchangers

Equal Velocity Method and Its Application in Heat Transfer Performance Test of Plate Heat Exchangers

Heat exchangers - Test procedures for establishing the performance of forced convection unit air coolers for refrigeration

Investigation of the Effects of the Corrugated Dimension on Heat Transfer Performances of Plate Heat Exchangers

Investigation of self-preventing fouling technology for the self-rotating cleaning twisted tape in heat exchangers

Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length

Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length

Performance comparison of liquid-cooling with air-cooling heat exchangers for telecommunication equipment

Study of Sintered Porous Coating Tubes with Composite Powder in Heat Exchangers

Heat exchangers - Refrigerant cooled liquid coolers - Test methods for establishing the performance

Experimental research of self-preventing fouling technology for the self-rotating twisted tape in heat exchangers

Schemes of corrugation in plate-shell heat exchangers for heat transfer enhancement during condensation and liquid film processes

Analysis of the Importance of Complete Washing of the Heat Exchangers in Air-Conditioner Sets

Manufacture technology and performance improvement of air-conditioning heat exchangers

Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials

Analysis of the failure in connection with aluminum brazed plate-fin heat exchangers and preventive measures

Analysis of the failure in connection with aluminum brazed plate-fin heat exchangers and preventive measures

Airside Heat Transfer and Pressure Drop Characteristics of Slit Fin-and-Tube Heat Exchangers under Dehumidifying Conditions

Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking

Comprehensive-performance Optimization Design Method for Multi-stream Heat Exchangers

Performance Comparison Between Helical and Segmental Baffle Board Heat Exchangers and Optimization of Helix Angle

Performance of heat exchangers with helical baffles in different structural and operational parameters

Analyses on steady-state temperature distribution around an inclined borehole in geothermal heat exchangers

The numerical study on heat transfer and pressure drop characteristics of tube-fin heat exchangers with the vortex generators

Welded steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials

Application of plastic heat exchangers to lithium-bromide absorption-type refrigerating machines

Heat exchangers - Methods of measuring the parameters necessary for establishing the performance

Progress in study of automobile aluminium heat-exchangers

Preparation of material scale cleaner for the board heat exchangers in the isolation workroom of aluminium factory

Introduction of Artificial Neural Network Applied in Finned-tube Heat exchangers Performance Analysis

Superpressure Water Jet Cleaning for Air Coolers, Reactors a nd Heat Exchangers of Nanjing Yangzi Petrochemical Refinery

Discussion of the Supersonic Cleaning Technology for Heat Exchangers in Air-Conditioner Sets

Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

Airside heat and mass transfer characteristics of split fin-and-tube heat exchangers under dehumidifying conditions

Numerical simulation of the shell side flow in rod baffle heat exchangers and analysis of field coordination

Influence of two kinds geological and climate conditions on rock heat exchangers

Influence of two kinds geological and climate conditions on rock heat exchangers

Performance of fin-and-tube heat exchangers-frictional performance of larger diameter configurations

Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

Experimental research and optimizing analysis for underground U-tube heat exchangers of ground source heat pump system

The research on improving heat exchanging performance of vertical buried ground heat exchangers of ground source heat pump

Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

Investigation on the Performance of Refrigeration System Using Liquid-suction Heat Exchangers

Application of Simulated Annealing Algorithm for Improvement of Optimal Design of Tube-Shell Type Heat Exchangers

Heat exchangers - Air cooled liquid coolers dry coolers - Test methods for establishing the performance

Cooling systems, heat exchangers and thermal services and repair work for all types of power plants throughout the world;

Semi-Welded Plate Heat Exchangers Applications and Development in Refrigeration Systems

Experimental research on high-performance backfill materials for ground heat exchangers

Application of spiral baffle tubular heat exchangers in atmospheric-vacuum distillation unit

Effect of hydrophilic coating on airside performance of wavy fin-and-tube heat exchangers under dehumidifying conditions

Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance

New Progress in Hang Yang made plate-fin heat exchangers used in ethylene apparatus

Analysis on the outside surface corrosion of the pipes in evaporative air cooled heat exchangers

Knowledge based genetic-simulated-annealing method for optimizing tube circuit of fin-and-tube heat exchangers

Production Process and Extrusion Die Design of Aluminum Harmonica Tube for Automobile Heat Exchangers

Research Progress of Strengthened Heat Transfer Technique and New Type High Efficient Heat Exchangers

Application of gas heat exchangers with perforated supporting plate in sulphuric acid production

Application of plate-fin heat exchangers to a hotel air conditioning system

Numerical simulation on heat transfer characteristics of soilaround compact pile-buried underground heat exchangers

Heat exchangers - Test procedures for establishing the performance of air to air and flue gases heat recovery devices

Heat transfer performance of condensing flue heat exchangers with anticorrosion films

Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices

Investigation on the Favorable Temperature Difference for Heat Exchangers

Considerations in Designing Next-Generation Finned, Copper Tube Heat Exchangers

Applications of PTFE and its composite materials in heat exchangers

Performance research and structural optimization for micro heat pipe heat exchangers

Application of high efficiency heat exchangers in the revamp of atmospheric vacuum distillation unit

Dynamic performance simulation of plate-fin heat exchangers in air separation application

A Study and Forecast of Dynamic Characteristics of Heat Exchangers with Continuous Spiral Baffle Plates

Comparative Experiment on Heat Transfer and Flow Resistance for New Type of Finned Tubes of Air-Cooled Heat Exchangers

Comparison between optimum synthesizing methods of networks of heat exchangers

Heat exchangers; Verification of thermal balance of water-fed or steam-fed primary circuits; Principles and test requirements

Heat transfer model and thermal resistance calculation of U-shape buried pipe of geothermal heat exchangers

Study on the Influence of Self-organization Ability on Multi-Stream Heat Exchangers upon Its Operation and Control

Error analysis of the length calculation for vertical ground heat exchangers

Experimental Study on Two-Phase Flow Maldistribution at the Entrance of Plate-Fin Heat Exchangers

Experimental Research on Micro Heat Exchangers Tsinghua University

Application of virtual instrument technology in research on the characters of heat exchangers

Fuzzy comprehensive evaluation of flue gas heat exchangers in wet flue gas desulfurization systems

Experimental study on dynamic behaviors for shell-and-tube heat exchangers with continuous baffles

An Experimental Investigation on the Performance of the Fouling in Heat Exchangers for Recovering Heat Energy in Sewages

Nonlinear parameter estimation method for transient test of compact heat exchangers

Modelbase of Tube-and-shell Heat Exchangers and Its Application to Simulation of Heat Exchanger Networks

A Network Method Predicting the Dynamic Characteristics of Multi-Stream Plate-fin Heat Exchangers

Experimental Study and Prediction of Pressure Drop and Heat Transfer in Shell-side of Tube-and-shell Heat Exchangers

Numerical Simulation and Experimental Study on Turbulent Flow in Shell Side of Shell-and-Tube Heat Exchangers

Discussion on Reduction of Numbers of Outer Joint Pipelines of Separate-type Heatpipe Heat Exchangers

Performance of Lanced Fin Heat Exchangers under Wet Conditions in Air-conditioning Equipment

Numerical simulation of heat exchangers with different shell structures

Performance comparison and economic analysis of compact heat exchangers

Application of Improved Rod - Baffle Heat Exchangers in Ammonia Synthesis Industry

Schemes of two-scale corrugation for plate-shell heat exchangers

Experimental Study on Materials Optimizing of Heat Exchangers of Air Conditioners

Discussion for Application of Stainless Steels in Corrugated Tube Heat Exchangers

Management of the Twine Pipe Heat Exchangers and Their Prospect Analysis

Numerical Simulation of the Thermodynamic Process of Air Flow on Fin Surfaces in Heat Exchangers

Development and application on the high effective heat exchangers with lower flow resistance

Chemical cleaning of heat - exchangers in pure water cooling system with silicon rectifier

Thermal Resistance Inside Bore-holes of Vertical Geothermal Heat Exchangers

New techniques of plate-fin heat exchangers and its application

The automatic optimal control process of two-stream heat exchangers

Subterranean heat exchangers for experimental study in ground source heat pump system

Analysis of seawater heat exchangers for seawater refrigeration and heat pump systems

Analytical Solution of Plate-fin Heat Exchangers Considering the Dispersion of Fluids

Comparison for performances of spiral plate and segmental baffle heat exchangers

Analysis of anti-vibration performance of the baffle heat exchangers

Simulation study and modification in shell side of shell-and-tube heat exchangers with helical baffles

Shell-side heat transfer and pressure drop of shell-and-tube heat exchangers with overlap helical baffles

The Simulation and Application on Mass Customization for Finned Tube Type Heat Exchangers

Cause Analysis of Leakage Occurred in Hydrogen Retrieve Heat Exchangers and Repair Method

Vibration analysis and precautionary measure on tube bundle of shell-and-tube heat exchangers

Experimental Research on Flow Maldistribution in Plate-Fin Heat Exchangers

Corrosion repairing for high temperature and high pressure heat exchangers

Intensive measures for convective heat transfer on tubular heat exchangers

Comparison of Physical Models of Porous Surface Tubes in Boiling Heat Transfer in Heat Exchangers

Specification for design of steel double pipe heat exchangers for petrochemical