heat exchanger

Wedges are inserted between the part of the supporting component and a spacer plate of the heat exchanger.

He followed one of these pods and emerged in a round chamber, lit by an overhead heat exchanger that dripped fluorescing green coolant.

Thee axis cards and membership cards to make another advantage of the heat exchanger version to a minute or so.

This heat is transferred to a heat exchanger to heat water in a storage tank or to be stored for later use.

In this paper, one of desiccant coating technology and its impact on the total heat exchanger performance were tested and analysis.

At the beginning of the experiment had a heat exchanger scale sample collection and study of theoretical work.

It is important that the water sample passing over the probe is representative of the amount of ozone going to the heat exchanger equipment.

Solution set out in the heat pipe heat exchanger, scattered in the gas-liquid two-phase fluid into the heat exchanger tube set.

the heat exchanger is connected with the discharge hole of at least a hydrogenation reactor.

The influence of solar radiation on the heat-transfer performance of an outdoor air heat exchanger in a heat pump system is considerable.

Put into using in less than two years, the plates of plate-type heat exchanger were found to be corroded badly.

For different requirements of design, weight or effectiveness of a heat exchanger can be taken as an object function respectively by GA.

The process and its result of the on-line cleaning program in heat exchanger of Shenyang Paraffin Refinery Plant are introduced.

List two components of an air cooled heat exchanger aimed at enhancing heat transfer.

The present invention provides a coating composition, a heat exchanger, and an air-conditioner.

The heating module includes a PTC type heating element in conduction with a base plate and a number of heat exchanger fins.

The machine should be kept clean. Do not allow dirt to deposit on the heat exchanger.

The experimental result can be used for practical production and improve the performance of heat-exchanger effectively.

Pinch method is a simple heat exchanger network synthesis method, it has been widely used in practical projects and achieved good results.

The anion regeneration unit shall also be supplied with a heat exchanger for heating the caustic regeneration dilution water.

and the heat exchanger of ground source heat pump buried underground, and away from the main building, it will not affect its modeling.

List the three main parts of an air cooled heat exchanger system.

the system consists of a buffer tank, pump, UV lamp, heat exchanger plus a loop to the different POU's, POU's, incl. a control system.

Aluminum microchannel tube fined heat exchanger, or, microchannel heat exchanger is one of the achievements from the demand.

Through the heat exchanger fluid heat transfer from the higher temperature to lower temperature fluid, to meet the process requirements.

The optimization research for the heat exchanger of waste heat recovery is the core content of this article.

Heat exchanger takes up an important place in oil refining and petrochemical industry.

The membrane-based total heat exchanger is a novel heat recovery unit due to its simultaneous recovery of sensible heat and moisture.

This article is mainly introduce the experimental process, results and apply of explode expansion jointing of the heat exchanger.

The heat transfer and flow resistance performance of corrugated tube heat exchanger were examined by oil, water, and steam.

Three sub systems of heating, electricity generating and heat pump are combined by an intermediate heat exchanger.

Based on analytic theory, the temperature distributing analytic expression in the ground around the U-tube heat exchanger was obtained.

The invention discloses an overflow hole type throttling structure for a medium inlet of a plate heat exchanger.

State the definition of an air cooled heat exchanger.

The heat exchanger could markedly improve the heat exchanger performance of lubricant cooler , air cooler and mixture vapor condenser .

The invention relates to a method for removing solid matter from the pipes of a heat exchanger consisting of a bundle of pipes.

The sections of the plate heat exchanger on either side of the regeneration section are used for heating and cooling.

Internal heat exchanger, the heat generated by cooling water system in cooling tower in the air emissions.

Cavitation was calculated in the heat exchanger test-bed. The generation of cavitation was simulated when fluid flows through throttle pipe.

Heat exchanger of imported stainless-steel and of scientific design insures it only takes several minutes to reach the preset temperature.

The Zurich laboratory has already constructed a prototype that feeds the water from the chips into a heat-exchanger.

The invention discloses a method for preventing scaling and crystallization in a heat exchanger and an arrangement for the method.

But the heat exchanger inserted by disturbance device is easy to manufacture and fix, more suitable to be changed for old heat exchanger.

Puts forward the technique of flushing the heat exchanger bundles alternately with high head water for shell-and-tube heat exchangers.

The study of the heat transfer performance of the heat exchanger tube used in tobacco flue-curing industry is very important.

Finally, it showed that the plate heat - exchanger was better than the screw plate heat - exchanger, by analyzing both characteristics.

The bending blanking open is set at the two side of the heat sink oppositely. After bending, assembling a three-bend heat exchanger.

Since the company started in 1988 manufacturing plate heat exchanger, have passed ISO9001-2000 quality system certification.

The invention relates to an automatic contaminant release device of a heat exchanger applied in furnaces of lime industry.

The superheated water is then directed to a heat exchanger where it transfers its energy to a second set of lower-pressure pipes.

Analyze and compare the heat transfer efficiency of horizontal tube, vertical tube coal gas primary heat exchanger.

heating medium pipelines are connected with the shell inlet and outlet of the heat exchanger.

In this work the researches of functionability of the heat exchanger - condenser of a special design (fig. 1) are held.

SAPA Shanghai has been developing heat exchanger solutions for decades, and is in the leading position of Asia Pacific automotive market.

An electric heater mainly comprises an electric heater, a container, a heat exchanger, a honeycomb duct and a honeycomb board.

Central air-condition system: a fan - coil system can cools rooms in the summer and a plate heat - exchanger provides warmth in winter.

For shell-and-tube heat exchanger, There are welding and expanding two methods used for connecting tube to the tube sheet.

Heat exchanger is in the industrial production process of heat transfer between the material in a device, it is also called heat exchangers.

The plates of the heat exchanger together constitute cassettes which are stacked on one another.

The invention relates to a hot-water heat exchanger and a central air-conditioner using the hot-water heat exchanger.

A heat exchanger suited for ultra heavy oil heating and its accurate operation parameters also have been developed.

Through analyzing the impact of heat exchanger leakage on circulating water system, then clay was used to control the leakage.

A heat exchanger has a first thermally conductive tube for conducting a fluid and a second thermal conductive tube for conducting a fluid.

Plate heat exchanger can be widely applicable in ship building, petrifaction , air condition, food, medicine, steel, engine, etc.

A novel approach has been developed for simultaneous synthesis of a heat exchanger network (HEN) via Swarm Intelligent Optimization.

We are a professional manufacturer of energy-saving heat exchanger equipment integrated with R&D, manufacturing, sales and service.

Brass seamless tube can be used in heat exchanger and condenser, low temperature pipe, underwater transportation pipe.

In this configuration both solar collector and heat pump evaporator are separate units but coupled through a heat exchanger.

The invention relates to a moisture-heat exchanger unit for tidal air of a patient.

The calculation method for optimum design of the bellows tube heat exchanger and its application base are provided.

Research of applying microchannel heat exchanger to refrigeration compressor condensing unit is carried out in this paper.

In the stress analysis of heat exchanger system, the tube layout area of tube sheet should be treated as a various elastic based plate.

The conclusions of this paper are of great significance in the optimum design of plate-fin heat exchanger.

A compound pneumatic energy-saving heat exchanger relates to a heat exchanger, which adopts a multi-level compound structure.

Part Two compares the traditional tube-fin heat exchanger and the microchannel heat exchanger used in compressor condensing unit.

The refrigeration system employs a plate heat exchanger to provide on demand refrigeration of an intermittent water flow.

In all studied modes the stable running of the heat exchanger - condenser was watched.

The utility model discloses a heat exchanger taking wind as heat medium and a heat exchange system using the aforementioned heat exchanger.

The heat tranfer and pressure drop performance of cross flow longitudinally finned tube banks heat exchanger are reported.

The technologies of heat transfer enhancement for shell-and-tube heat exchanger have been applied in petrol and chemical industries.

Microchannel heat exchanger simulation and optimization are organized using distributed-parameter method.

Heavy water heat exchanger is an important equipment of heavy water system in the two constructing research reactors.

"Hongli" product is the better choice for heat exchanger industry, air conditioner industry and cooling industry.

The invention relates to a heat exchanger in air conditioner, which comprises several radiating fins and pipes.

The invented heat exchanger including multiple cascaded recuperators forms heat exchange mode of stepped countercurrent liquid bath.

showed this welding method used in the high-pressured heat exchanger all-position welding is completely feasible.

Heat exchanger: Any of several devices that transfer heat from a hot to a cold fluid.

In this paper, thermal performance test-bed of total heat exchanger is improved with the requirements of the frosting experiment.

Globally consolidate and integrate heat exchanger demand across industries, customers and applications.

Heat exchanger technology has wide applications in HVAC and powertrain cooling industry covers automotive, power energy, food process, etc.

Based on the heat calculation, the heat exchanging effects of graphite block heat exchanger and shell and tube exchanger were compared.

Introduction of Aluminum material replaced the traditional heavy and spacious copper and makes the current heat exchanger more efficient.

Application of even temperature-difference field optimizing principle on fluid organization of multi-stream heat exchanger.

For the water-water heat exchanger of elastic tube bundles, the characteristics of heat transfer and flow resistances were studied.

Regardless of whether a customer has chosen, "and the sea was" brand heat exchanger, we are happy to provide whatever technical services.

Plate type air to air heat exchanger is an effective equipment of energy recovery.

A three dimensional thermal-hydraulic model is developed for the analysis of fluid flow and heat transfer in shell-and-tube heat exchanger.

This topic is isopropyl amine tower, belong to the design of the condenser of fixed tube heat exchanger tube heat exchanger.

"The idea was to use lasers as a heat exchanger--take the energy and make a hot fluid that can expand out of the nozzle, " Bruccoleri says.

The Sapa Group develops, manufactures and markets value-added profiles, profile-based building systems and heat exchanger strips.

The swirling flow devices inserted in the inner tube of a concentric tube heat exchanger.

The results can provide theoretical references for structural design of immerse coil heat exchanger of heat fermentation liquid.

A simple model for heat transfer analysis of flat-plate heat exchanger with Phase Change Material ( PCM )is built.

the heat exchanger is used during the condensing process . no scorching will occur during the condensing process.

A feasibility study on applying self-excited oscillate chamber to shell and tube heat exchanger for heat transfer enhancement is analyzed.

Priority on living hot water: The high-efficient composite bushing heat exchanger with unique process improves the reliability of system.

The performance of ground heat exchanger directly influences first investment and running costs of ground source heat pump system.

They will cake on the walls of the heat exchanger, from which they could be removed easily during periodic shutdowns.

The structure and performance characteristics of shell heat exchanger with corrugated plate are introduced.

The paper states the fundament , main technical performances and the application of ceramics high-temperate rotary heat exchanger.

Indirect cooling mode, cooling the sterilizing water with heat exchanger, avoids secondary pollution.

A new type of control project, implying model algorithm and cascade control for the four-stream plate-fin heat exchanger is offered.

The influence of non-condensable gas on heat transfer performance of the single-row tube heat exchanger is analyzed.

The structure, manufacture feature and matters needing attention in operation of double shell side heat exchanger a. . .

Six programs with aqua and load sensor, heat exchanger technology and four special options are controlled via the black touch controls.

and the vortex tube refrigeration assembly includes vortex tube, evaporator and countercurrent heat exchanger.

Meet the performance: removable plate heat exchanger with unparalleled flexibility.

To monitor and evaluate fouling accurately in heat exchanger is the key technique of promoting inhibitors development.

A comparative analysis is made between the dehumidification system with and without thermosyphon heat exchanger.

High heat exchanger skin temperatures can cause scale to adhere in a manner that ozone cannot prevent.

This heat exchanger is designed to extend the working life of facilities.

At present, little research about multiple well heat exchangers is done; and most studies are limited to single well heat exchanger.

The flow field in tapered jacket-type flow distributor in heat exchanger is simulated with computational fluid dynamics(CFD).

A mathematical model for calculating soil temperature around double U-type buried tube heat exchanger is constructed.

Heat Exchanger provides a 5 PSI or less pressure drop across the whole dryer, even with the standard inlet filter.

Xunble heat exchanger---degrading energy consumption, upgrading core competitiveness.

A solution heat exchanger with hollow fiber membrane applied in lithium bromide absorption systems was proposed.

This paper discussed about how to confirm the mould dimension of the heat exchanger manufactured with titanium coil pipe(TA2).

Any indirect type of heat exchanger can BE utilized to accomplish the desired result.

The nontoxic fog is a compound of water and glycol that is forced through a patented cartridge connected to an internal heat exchanger.

This design program can help the designer to design the twisted tube heat exchanger, which can meet the request of specific heat duty.

Designed different specifications of the exhaust gas heat exchanger.

and the tail section pipe of the heat exchanger is arranged outside the cylinder cover.

The main process and equipment of methanol heat exchanger EA - 206 in ammonia unit are introduced, and corrosion mechanisms is studied.

cooler: the flange copper tube type heat exchanger area, the cooling speed, accurate temperature control.

The character is the water heater, heat exchanger, two-position three way magnetic valve and insulating water tank are set.

A fan forces ambient air to flow through the sample followed by a water heat exchanger.

Combing the principle of thermodynamics, two optimal heat exchanger networks are obtained.

and the base area and tube heat exchanger finned tube heat transfer area by accounting are in line with operational requirements.

Is the heat exchanger able to deliver the dialed in 200F shots at that moment?

The dynamic model of continuous stirred tank reactor(CSTR) reactor-heat exchanger networks was analyzed.

Using a heat exchanger conserves the resource, minimizes corrosion, and skirts the problem, of wastewater disposal.

economic performance: the host using corrugated casing coaxial heat exchanger, high energy efficiency, energy saving of 40%.

As the term heat exchanger suggests, heat is exchanged from the hotter body to the cooler body.

We take the leading position in producing and selling aluminum clad and unclad strip and sheet for heat exchanger.

Fouling also refers to the accumulation of normally inorganic deposits on heat exchanger tubing.

The self-rotating twisted tape inserted heat exchanger tubes can enhance heat transfer and prevent fouling on-line.

There is a gap throughout between the lower end portion of the outdoor heat exchanger and the upper surface of the drain pan.

Andin improved BP neural network we predicted the thermal resistance of corrosion fouling that was formed in heat exchanger surfaces.

This heat exchanger is composed of tunnel-type air inlet and exhaust channels which are alternatively arranged.

The quench gas of Kellogg multi-bed ammonia converter is the gas from tube-side of heat exchanger -C , whose temperature is C.

Indoor air heat exchanger is made up of preheat exchanger and secondary heat exchanger, and removed wet compression for compressor.

Therefore, improving the GGH heat exchanger components scaling is inevitable.

In addition, the inner liner of the hot-water heat exchanger is not easily broken when the water temperature rises to ensure service life.

Plate heat exchanger is a liquid - liquid, liquid - gas to an ideal heat exchange equipment.

A heat exchanger which is the cold source in a closed steam cycle and condenses the exhaust steam of the turbine.

After repair as per the detailed repair scheme, the high-pressure spiral tube heat exchanger is recovered to normal run.

Being simple, the process needs no additional heat exchanger and results in savings in in-vestment and energy consumption.

That new type heat exchanger has been applied broader and broader in refined, chemical, electric power enterprises etc.

It uses steam or electric heater as heating resource and uses axial fan, heat exchanger to heat air in convective way.

Vertical heat exchanger is mainly divided into single U-tube heat exchanger and double U-tube heat exchanger.

Double-pipe heat exchanger, fault shutdown protection, copper head pumps, triple guarantee water quality from pollution. 2.

The calculation for the tube plate thickness of heat exchanger is complex in normal design.

The DuroFlow is a cast-in heat exchanger designed to provide superior heat transfer characteristics in flow applications.

Finned tube is used to product various of efficient heat exchanger devices, especially in the remaining heat using area.

The invention relates to a heat exchanger, especially a charge air cooler (5) for motor vehicles.

According to the experiment and finite element analysis, we studied the stability of heat-exchanger bellows under external pressure.

Company under the machinery and equipment factory, stainless steel heat exchanger equipment, workshop and shop.

Internal heat exchanger is central air conditioning system of "refrigeration source" .

The hot water heat exchanger respectively connects to tap water pipe and heat insulating water tank.

dissipation in a tubular heat exchanger is determined.

Horizon of soil of ground heat exchanger was been compartmentalized two layer with clay and gravel.

The heat-exchanger tube is a straight tube, a bent tube or a twisted tube.

Using the heat exchanger of plate type and shell and tube evaporatoris to increase the heat exchange.

This subject comes from the first catalysis and the forth distillation heat exchanger device of Mao petrochemical.

the heat exchanger need hot bolting.

Hourly simulating is the most scientific method to design the underground heat exchanger.

The application of nanometer titanium polimer covering material is new technology of anti-fouling of sewage heat exchanger.

The study showed that reducing fin height and fin pitch, increasing louver pitch improves the air-side performance of heat exchanger.

Offer complete manufacture equipment units and mould of plate heat exchanger.

Causes of failure of the imported heat exchanger for 2 # CCL are analyzed, and the solution to this trouble has been found out.

The causes and mechanism of the failure of a CW1-101 melting-salt heat exchanger are analyzed.

Furthermore, the paper still studies the self-tight seal tube sheet of U-tube heat exchanger deeply.

Deeply study is conducted on pre-stressed heat exchanger with segmental baffles in this paper.

Heat transfer analyses of ground heat exchanger is crucial in the application of GSHP systems.

The Performence of spirally indented heat exchanger tubes is compared with smooth tubes under experiment of sealing.

State the definition of a heat exchanger.

Develop heat exchanger simulation software, and other engineering design tools.

Wuxi Hongsheng Heat Exchanger Manufacturing Co. , Ltd.

A new type of plate heat exchanger using low-pressure secondary steam was introduced in this article.

Products through the plate heat exchanger for re-heating cycle.

American joint venture sales of products, namely, semi-hot heat exchanger.

The indoor heat exchanger and the drain tray can achieve dismantling by sliding on the under part frame.

High efficiency tube and shell heat exchanger with copper inner tube and steel outer jacket guarantees long life and peak performance.

All copper constructed tube in tube heat exchanger to cool your compressed air stream.

The working fluid has then been cooled by two methods, the regenerator and the cold sink heat exchanger.

At the same time of heat exchanger tubes set fin could reduce air on copper tube shock and avoid cracking of brass tubes.

It determines the economy and security of the whole heat exchanger.

There are small temperature and pressure difference in steam inlet and outlet of heat exchanger, and big heat transfer surface.

flex hose [17] between the ram air inlet duct and the heat exchanger [1].

The performance of casing heat exchanger is simulated and analyzed by FLUENT.

The present work applied this method to design for helical-baffle heat exchanger and did some simple work.

heat exchanger smoothness good substrate.

This dissertation, based on existing studies, established a new mathematical model of underground pipe heat exchanger.

The result indicates that the rectangle fin circle tube heat exchanger which has been chosen is suitable to our kW fast axial flow laser.

The sewage heat exchanger had serious scale buildup and corrosion.

Freezing latent heat exchanger (FLHE) is one of the key equipments of HPSFLHC.

A GSHP that uses a buried plastic pipe loop as a heat exchanger.

Heat exchanger had some rusting and corrosion - in need of servicing.

Slice-heat interchanger is a kind of energy-conservation heat exchanger.

Provides a better heat exchanger type in definite range of heat transfer area for this system.

A method of Heat Exchanger Networks(HEN) analysis based on system decomposition method for existing HEN structure was proposed.

As china's economy has developed rapidly, U heat-exchanger pipe is widely used.

It is a kind of coal gasification combustion dryer, which consists of coal gasification combustion furnace and heat exchanger.

All welded heat exchanger tubing shall pass the flattening and flange test requirements of ASME SB-516.

The local ship plate heat exchanger realm with the plank type the first brand .

the mixed heat exchanger provides high humidity and low temperature air for humidicold system, so it is a hard-core part.

It is very important for improving boiler's efficiency and safety to monitor on wall temperature of heat exchanger in boiler.

It is widely used to make boiler pipe, boiler superheater , heat exchanger fittings and so on.

Use the similarity theory to reduce the actual heat exchanger.

At last, the criterion equation for heat transfer laws of heat exchanger tubes was derived based on the experiment data.

A heat exchanger, in a narrow sense, is a vessel.

Its heat exchanger design for jacket outside the reactor wall settings, in the pot wall, Interior heat coil.

Based on the substructure technique of FEM, the model of the fin heat exchanger using the commercial software ANSYS is analyzed.

JDM-Jingda Machine has specialized in the manufacture of machinery for heat exchanger.

to replace the original water pump and tube type heat exchanger.

Fig. 1 The compared with chart of flower baffle heat exchanger and plane baffle heat exchanger.

Compared with the conventional T&F heat exchanger, MCHX is more efficient, more environmental-friendly, at the same time of lower cost.

After the hot water plate heat exchanger should be met.

A closer look at the rear-door heat exchanger put on the back of this rack of servers.

The loop is equipped with a heat exchanger to keep the water at 18?

Underground heat exchanger under the conditions of normal use there is no need to maintain.

The structure of the offset strip plate-fin heat exchanger was optimized designed based on a genetic algorithm(GA).

The results are described from the use of the corrugated tube heat exchanger in the water cooling system of the CO 2 removal section.

Wuxi Hongsheng Heat Exchanger Mfg. Co. , Ltd.

Practice confirm the evident effect of H - 276 plant heat exchanger in the work condition.

tubular heat exchanger on heat transfer.

Design method of microchannel heat exchanger is discussed according to the development of a new compressor condensing unit model.

The plastic tube contains a heat exchanger.

So it has great practical significance to study the heat transfer and friction characteristics of the H-type finned tube heat exchanger.

How to analysis and overcome the impact of heat exchanger fouling is a key problem of application of sewage.

The result shows that heat transfer coefficient of corrugated tube heat exchanger is over 1. 5 times than that of bare tube.

Plate ventilation heat exchanger is applied widely because of many virtues, such as simple structure, economic and building integration.

These are cooled in a heat-exchanger, from where some is fed to the cabin and the excess expelled.

By use of implicit scheme, exit and wall temperature varying with time in air- precooled heat exchanger for compound engine are extracted.

Business and residential heating heat exchanger Steam Station by clearing price of 29. 5 yuan per Ji Jiao adjusted to 42 yuan.

Therefore, to some extent this type of heat exchanger has a broad application space.

Air preheater is a kind of heat exchanger in power plant units.

The influencing factors of the composition and technology on the properties of the ceramic heat exchanger are also discribed.

Heat exchanger is an important part in automotive air-conditioning system.