alloy steel

Oxygen gas cutting can be used for carbon steel and low alloy steel, thickness can be up to several FenMi.

Other flat-rolled products of iron or non-alloy steel, hot-rolled, not in coils, with patterns in relief, of a thickness of less than 3 mm.

The suitable working condition and result of alloy cast iron. alloy tool steel WmCn group-hard alloy steel are analyzed in this paper.

Another type of alloy steel frequently used for tooling applications is stainless steel.

In case of high alloy steel or nonferrous materials, liquid penetrate method can be substituted.

H section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm.

C. Four columns are made of alloy steel with high strength, being hard chrome plated and good wearing resistance.

The present invention relates to low alloy steel and is especially steel for hull structure and its production process.

Rare earths can getcarburized granules on the surface of alloy steel fined, with diffusion even, the carburized layer thickened.

Evaluation of fracture toughness of the alloy steel by the JR resistance curve shows the influence of heat treatment technology.

For alloy steel piping system, the liquid temperature shall be higher than the brittle transition temperature of the metal material.

Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.

Standard samples like middle-low alloy steel and tin bronze have been tested by this automatic control system.

Bar and rod (from which wire is made) can be made of either low-carbon steel or higher-carbon and alloy steel.

Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : Bolts , screws and studs .

When properly maintained and overhauled, high-strength alloy steel components demonstrate high levels of service reliability.

Mainly used in welding low carbon steel, alloy steel, stainless steel, wear-resisting steel and cast iron.

Inspecting raw materials: Making inspection to the ingredients and specification of alloy steel ingot before processing.

T section of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more.

Widely used in electrolytic copper alloy steel cast bronze pieces of copper pieces of weld-repair.

Screw is made of alloy steel with long life. It is assembled by several units freely for more applied material and colorful products.

It is the main production that all kinds of the carbon steel, stainless steel, alloy steel investment castings and the ball valves.

Application: Drilling deep hole in non alloy steel, alloy steel , grey cast iron, malleable cast iron, special aluminum or magnesium alloy.

SCM alloy steel made crank shaft increase the strength and surface hardness for a longer life.

Annealing of point rail: Using box-type annealing furnace to make annealing treatment to the alloy steel rail before machining.

Material: low carbon steel, carbon steel, stainless steel, bearing steel, alloy steel, free cutting steel, copper and aluminum.

Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.

Titanium alloy exhibits the property of high strength to rigidity. It provides potentiality to replace aluminum alloy and alloy steel.

Special alloy steel material production spend wheel, wear resistance and welding head up and reused.

Pivot Pins: Hardened alloy steel, reduced friction, low wear, increased service life, supported by polymer bushings.

hot extrusion cold-rolling production of Cr-Mo alloy steel, some stainless steel, nickel-based alloy seamless tube technology.

All bearings are rolling bearings and the shafts are made of alloy steel.

Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.

For hardened steel, alloy steel, high speed steel, high carbon steel, etc. Also for thread and gear grinding and thin walled workpieces.

The moving parts are made of alloy steel and run on roller bearings.

This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.

Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron.

The influence of rare earth, titanium and nitrogen on the structures and properties of high boron alloy steel was researched.

The material is divided into: carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy.

The crankshaft is a one-piece casting or forging of heat treated alloy steel of considerable mechanical strength.

For medium or low speed roughing large chip sections for steel cast iron and alloy steel under unfavourable conditions.

The intermedium temperature microstructure of medium carbon alloy steel is upper and lower bainite.

SCOPE This specification establishes the requirements for welding carbon and alloy steel including Jervis B. Webb Company Webballoy steel.

thermal analysis shows that the different content Y refines the grains of low carbon micro-alloy steel.

welding material : low carbon steel , high strength steel , medium carbon steel , low alloy steel.

Aerospace series. Washers, lock with radial serrations, in alloy steel. Dimensions.

Meter pump: The meter pump with excellent quality alloy steel guarantees stable melting pressure and flow.

Forged or rolled alloy-steel pipe flange, forged fittings, and valves and parts for high-temperature service.

For welding medium carbon steel and low - alloy steel structures with appropriate strength .

For semi-finishing medium chip sections or finishing small chips sections for steel, cast steel and alloy steel.

The testing method of JR resistance curve is recommended, and the application of alloy steel with different heat treatment is given.

The product can be used a nickel-alloy raw material for producing stainless steel, alloy steel and alloy cast iron.

The landing nipple is made of special alloy steel, stainless steel, or K-Monel.

Global market for alloy steel wires is expected to grow at a compounded annual rate of 4% over the period 2001-2010.

Valve materials including: carbon steel, alloy steel, stainless steel etc.

The Joint Venture And Cooperation About Producing Carbon Steel And Alloy Steel Castings.

The influence of alloys on the seawater corrosive and abusive resistance of medium carbon alloy steel has been studied.

The research, has improved grinding technology of high- carbon alloy steel slender axis, and the phenomena exiguous flaws were overcomed.

Low alloy steel and natural heating, cooling should be corrected.

Suitable for welding of low carbon steel, medina carbon steel, low alloy steel and their cast etc.

Product Specification : Hub bolt for FUHUA axle, with alloy steel structure.

Alloy steel fan for air circulation and chamber temperature uniformity.

Alloying steel with other metals produces materials called alloy steel.

Motivating in my heart, I choose the most impossible channel in which the circular alloy steel gate is closed.

Used widely for welding or cutting carbon steel, stainless steel , alloy steel copper and other non- ferrous metals .

Alloy steel via heat treatment, grinding blade , enable to keep sharp edge and high precision.

For welding key structures of low - alloy steel with appropriate strength .

Moreover, some news said export drawback of alloy steel will possibly be abrogated.

Steel wire and wire products - Steel wire for ropes - Part 2 : cold drawn non alloy steel wire for ropes for general applications.

Welding stainless steel, alloy steel, carbon steel, copper and other nonferrous metals.

Suitable for welding of low carbon steel, medium carbon steel, low alloy steel and etc.

For cast iron, carbon steel, alloy steel, stainless steel cutting and grinding processing, especially the grinding effect is very good.

Identifications on material of alloy steel pipeline are clear.

VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUPPORTING SHOES.

Niobium in the low alloy steel was determined by spectrophotometry.

The defects of alloy steel pipe centrifugally cased are drawn. Their causes and preventives are analysed.

Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.

Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.

Alloy steel gear, hard tooth surface, large in output torque and durable in use.

It can also be used in cutting process, quenching alloy steel, high temperature stainless, cast steel and polyester fibreboard.

Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.

Jaws: Hardened alloy steel with lubrication, keyway slot for tooling location, 32 degree jaw motion Each jaw travels 1 degree beyond center.

Steel castings, low-alloy steel and stainless-steel parts.

DB590R steel is a new high strength and low-carbon alloy steel that developed by WuHan Tron and Steel Company.

The good welding of high - intensity alloy steel makes you get twice the result with half the effort .

The maximum preheat and interpass temperature for carbon steel and low-alloy steel shall be 600F (315C).

VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SKIRTS.

The use of high-quality alloy steel by forging, supported and given the strict heat treatment.

The steel works is branching out into alloy steel and steel plates.

STAINLESS STEEL. ALLOY STEEL AND CARBON STEEL.

Product range in Carbon and Alloy Steel, 316 Stainless, Duplex, Monel , Hastelloy, Inconel, Alloy 20 and Titanium.

Welding of import and low alloy steel structures .

I got a question comparing the hardness of alloy steel 1045 and 4140.

semi-finished products of other alloy steel.

Iron and steel. Wire rod in non-alloy steel. Tolerances.

Main applications: For piercing seamless steel tubes such as stainless steel, drill steel and high temperature alloy steel.

X80 alloy steel pipeline will be adopted on large scale on the Second West-East Gas Transmission Pipeline Project.

Angles, shapes and sections of iron or non-alloy steel.

For grinding of middle and high tensile strength metal , such as carbon steel , alloy steel , hard bronze, forgeable cast iron , ect.

Applicable to high tensile strength metal grinding, such as general carbon steel, alloy steel, malleable iron hard bronze.

VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUBPLATES.

the corporation is the professional one in producing stainless steel , alloy steel , carbon steel and so on.

The casting made in Stainless steel, Carbon steel, Alloy steel, High Strength Casting, common casting etc.

For carbon steel and low alloy steel iron welding.

Semi-finished products of iron or non-alloy steel.

The ordinary alloy steel can't be welded above 90%RH, which is inconvenient to construct in rainy area especially in the south area.

hollow drill bars and rods, of alloy or non-alloy steel.

Alloy steel, hermetically welded, oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments.

Raw materials adopt stainless steel, alloy steel, general carbon steel, brass, aluminum and so on.

At the same time, I have analyzed of the organizations and microhardness of the laser welded joints of medium carbon alloy steel 30CrMnSi.

Welding of important low alloy steel structures such as boiler, pressure vessels with suitable wires.

Other bars and rods of iron or non-alloy steel.

Because of adopted the high precision alloy steel spray head, has made users get the high quality coating result.

The present status and future trend of alloy steel grades, such as high strength low alloy steel, alloy structure st. . .

Welding of important low alloy steel structures such as boiler, pressure vessels, etc.

Wire of other alloy steel.

It is suitable for PCBN tool to cut hardened alloy-steel 42CrMo instead of grinding.

ALLOY STEEL : A steel containing iron and carbide plus one or more other metals such as nickel, chromium, or molybdenum.

The results showed that the fatigue strength of Low alloy steel in corrosion medium was much lower than that in air.

The welding wire is used welding low carbon structural steel low alloy steel. Such as ships, heavy-duty machines, pressure vessel etc.

We want to buy Rice, Spice, Stainless Steel, Special Steel, alloy Steel.

I have an inquiry here for1000 ton of special alloy steel which I hope you can supply.

Test Method for Spectrographic Determination of Boron in Carbon and Low Alloy Steel by the Point-to-Plane Technique

Alloy Steel Used for Supercritical and Ultra Supercritical Pressure Boiler

Experimental Research on Coated HSS Built-up Broach Used for Machining High-strength Alloy Steel

American National Standards Institute American Petroleum Institute approximate appendix alloy steel asbestos Asbestos graphite assembly

The Research of the Dipper Teeth Wear-resistant Materials Made of Low-Carbon and Low-Alloy Steel

Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs

Mechanical Property and Mechanical Stability of Retained Austenite in Quenching Microstructure of an Alloy Steel Containing Si

Evaluation and Calculation of the Uncertainty for the Determination of Carbon Content in Low Alloy Steel by Emission Spectroscopic

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

Influences of Carbon Content and Cooling Rate on the Structure and Properties of Medium-carbon Low-alloy Steel and Its Application Effects

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel

Analysis of Failure of Plug Used for Piercing of High Alloy Steel Tube

Numerical Simulation Study of Technological Program for Extrusion of Deep Hole Alloy Steel Part

Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties

Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes; specifications

Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

Finite Element Simulation of Temperature Distribution of an Alloy Steel Billet in Box Pass during Stable Hot-Rolling

Fasteners; technical delivery conditions; property classes for carbon steel and alloy steel bolts and screws; conversion of property classes

Combination of Strength and Plasticity of a Low Alloy Steel after Torsional Prestrain

Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten

Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

Study of rale element on crystal deposition and mechanical properties in high alloy steel

Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service

Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

Alloy steel casting surface induction heating machine and its heating technology

The Determination of the Sub-temperature Quenching Process Parameter for Large Low Carbon Alloy Steel Forgings

Aerospace series - Washers, lock, with radial serrations, in alloy steel, cadmium plated for flight control rods - Dimensions

Repeatability and Reproducibility Research on Carbon in Low-Alloy Steel Analyzed by Spark Source Atomic Emission Spectrometry

Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

Castings, Investment, Carbon and Low Alloy Steel for General Application and Cobalt Alloy for High Strength at Elevated Temperatures

Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique

Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

technical standard for chrome - molybdenum alloy steel plug - welding return of petrochemical tubular heater

Exploration on parameters affecting characteristics of sintering hardened alloy steel

The Relativity of the simulated Accelerated Test of Carbon Steel and Low Alloy Steel and Atmospheric Corrosion Test

Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

Study of Medium Carbon Low Alloy Steel of the Assembled Bucket Teeth

Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon

Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

Study on the Metallurgical Structure Characters of Sub-surface Layer of Ultra-high Strength Alloy Steel in High Speed Milling Condition

Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

Analysis study of adiabatic shear band in ultra-high strength low alloy steel plate

Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

Determination of Carbon and Sulfur in Low and Middle Alloy Steel by Electro-Optical Direct Reading Emission Spectrometer-PDA Method

Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

Determination of molybdenum in alloy steel by microwave digestion-spectrophotometry

Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

DSC Investigation in Transformation Kinetics of Deformed Low Alloy Steel Containing Aluminium and Niobium

The description of the industry standard of quality carbon steel and alloy steel continuous casting slab

Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

Study on Ultrasonic Fatigue Life of Ultrasonic Probe with Alloy Steel

Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

Industry: Stainless steel; Non-ferrous metal wires; Titanium; Nickel Alloy; Steel wire (bar) material; Wire mesh;

Discussion on the machining work of the stainless steel and high temperature alloy steel

Evaluation of Uncertainty in Determination of Carbon in Low Alloy Steel by Electric Spark-Direct Reading Spectrometry

Investigation of mechanism of toughness improvement of warm prestressing in notched specimens of alloy steel

Catalytic kinetic spectrophotometry for the determination of cobalt in alloy steel

Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

Study on original position statistic distribution analysis of low alloy steel continuous casting billet

Material: Cast iron, Carbon steel, Alloy steel, Stainless steel, Heat resisting still, Copper, Aluminum

except the two ceramic roll balls, the material of the entire one way valve is high-intensity alloy steel;

Discussion about Rule of Diffusible Hydrogen Content in Deposited Metal of High Strength Low Alloy Steel Spherical Tanks

Standard Specification for Alloy-Steel Bolting Materials for Special Applications

Effect of hydrogen on the behaviour of stainless steel weld overlay cladding applied to low alloy steel

Influence of elements powder pre-alloying technology on microstructure and property of sintered alloy-steel

Investigation of strength matching of high strength low alloy steel and its weld metal

Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

The analysis of qualities of electroslag smelting alloy steel with the methods of ultrasonic inspection

Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

Aerospace - Washers, chamfered, with counterbore, in alloy steel, cadmium plated

Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched and Tempered

Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

Microstructure and Properties of Low Alloy Steel with High Carbon Concentration Carburizing

Evaluation of uncertainty for determination of carbon and sulphur in low-alloy steel by infrared absorption method

Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

Factorial Study on Nonlinear Characteristics of Ultra High Strength Alloy Steel in High-Speed Cutting Process

Comparison of corrosive impact abrasion behavior between low carbon high alloy steel and high manganese steel

Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

Classification and testing methods for deposited metal of submerged arc welding for carbon steel and low alloy steel

Fabrication and Mechanical Properties of Low Alloy Steel Composite Reinforced with In-Situ TiC Particles

Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled Standard Specification for Drawing Alloy

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification

Study of Hot Processing and Modeling of High Strength Low Alloy Steel

Carbon steel Low alloy steel Stainless steel Copper and its alloy Nickel and its alloy

Ferritic alloy-steel tube used in high-temperature condition

Determination of micro amounts of tin in alloy steel by sequential injection spectrophotometry

Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

Seamless and Welded Carbon, Ferritic and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins

Microstructure and Tensile Properties of High Strength and Low Alloy Steel in Different Relaxation Time

Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

Determination of Vanadium in Alloy Steel by FIA Differential Spectrophotometry

The application of elastic denture inlaid with mesh of alloy steel for the restoration of free end teeth loss

Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

Impact Wear Characteristics and Mechanism of Medium Carbon Alloy Steel on Corrosive Condition

Steel wire and wire products - Steel wire for ropes - Cold drawn non alloy steel wire for ropes for general applications

Influence of Heat Treatment Process on Microstructure and Properties of Wear-resistant Low Alloy Steel